How to generate an id for a vendor when create a new one?

Dear friends,
How to generate a new id for a new vendor when create the new vendor?
Thanks a lot!

>
Qiwei Yin wrote:
> Dear friends,
>
> How to generate a new id for a new vendor when create the new vendor?
>
> Thanks a lot!
Hi,
For many account groups, there is no need to specify vendor number while creating a new vendor. They will take internal number assignment and you can leave this field blank.
For external number assignment, you can assign you own number.
If you are creating vendors through program, and you want your vendors in a particular format, you can use your own number ranges created through SNRO.
regards
Sreenivas

Similar Messages

  • How can I maintain the classification in UI when creating a new BP?

    SAP CRM 2007 (UI)
    Hi,
    In SAP GUI the classification can be maintained in tab “classification”.
    How can I maintain the classification in UI when creating a new BP?
    Thanks for your support.
    Regards,
    AV

    Hi Anand,
    thanks for your prompt answer.
    By default all ship-to-parties are assigned to classification “Customer”. How can we assign a different classification to ship-to-parties in UI? The view “Account classification” seems to be different from the tab “classification” in SAP GUI.
    Regards,
    AV

  • HT2623 How do I delete my icloud email address and create a new one?

    How do I delete my icloud email address and create a new one?

    You can't, except by creating a new iCloud account.  But you can create an @icloud.com email alias address to use that will receive email in your current inbox (see http://support.apple.com/kb/PH2622).  (Note: alias addresses cannot later be used to create a new iCloud account, nor can they be moved to another account or be reactivated should you ever delete them.)

  • Hello how can i transfer photo for my old computer to the new one

    hello how can i transfer photo for my old computer to the new one

    If your computers are connected to the same network, you can turn on Sharing to allow you to see the contents of one from the other and do transfers. If there is no network, you can use "target disk mode" explained here: http://support.apple.com/kb/PH13842
    Otherwise, you will need to use external storage such as a USB flash drive.

  • How to fill the tables faglflexa and faglflext when creating a new document

    Hello all,
    I need to modify the field faglflexa-RMVCT when creating a new FI document , actually i'm using the transaction ABUMN,
    i tried to use manu user-exit to change this table unfortunately , I have not changed this entry .
    Could you please help me to find a solution for this problem?
    Thank you in advance,

    When you are defining the elements of the datatype there are columns where you can do what you need:
    <b>column type</b>: here you choose the type of data of the element
    it can be a standard type or a user defined one (if you click one time only it should appear an icon in the right for input help: click there and choose the type you need)
    <b>column occurence </b>: in a similar way of column type here you define the cardinality of the element (min occurence and max occurence)
    setting min occurrence: 1, max occurrence 1 or unbounded --> required
            mmin occurrence 0, max occurrence 0, 1 or unbounded --> optional
    about the attributes there are directly the choice between required or optional.
    <b> column details </b>: here you define the length of the  element if it is a string or a lot of other things if the type is a different one.
    I hope this will help you

  • How do i erase my old apple id and create a new one with a new email address

    I forgot my phones Apple ID password and along with that forgot my password to my email account. I use my work email so thats why i dont really know the email i created for my phone. 
    So I created a new email and a new Apple ID online but when i put it the new Apple ID in my phone it says its incorect and shows my username as my old email that i had.  If that made any sense my entire question is how do i erase my old apple id on my phone and replace it with the new one i submittes online?

    Contact Apple, either through the link in that article or by phoning them. Alternatively, just create a new Apple ID; previous iTunes Store purchases won't be transferred to it.
    (79271)

  • Can not change vendor when creating a new Development Component in NWDS

    Dear friends,
    Im trying to create a new Development Component in NWDS. Our NWDS is connected to NWDI and we are using CM Services option of NWDI.
    Before I could create a DC and change the vendor but now I cant change it anymore. Now, the vendor is by default sap.com and we cant change it and it seems that we also have to put our project in a separate directory. home/ directory or other directories in the list.
    See below screen shots...
    If I make a new DC than we see it like this: home/bpm_test [sap.com].
    If I make a new DC in my LocalDevelopment I can change the vendor and I dont have to choose a home directory.
    Do you have any idea how to change that?
    Any help would be greatly appreciated.
    Thank you in advance,

    HI,
    it seems that the vendor is defined in the NWDI track. That's why you can't change it.
    regards,
    Vasils

  • How can i sign out of apple id and create a new one without it affecting my other devices

    How can i sign out of apple id and create  new one without it effecting my other devices using my existing apple id

    Content is tied to the account that originally bought/downloaded it - so if you created a new account as opposed to updating the old one, then you will need to continue to use the old account to download updates to its apps or to re-download its past purchases. If you didn't create a new account but instead updated your old one then try logging out of your account on the phone by tapping on the id in Settings > Store and then log back in

  • How do i shut down an old network and create a new one

    I have a network that requires a password.  I changed the password, but people who were previously signed in can still access the network.  How can I shut down the network and start a new one with a new password?

    Change both the name of the wireless network and the password
    Make sure that you are using WPA2 Security
    If you give the password to anyone, you should assume that they will give it to someone else.

  • How do I get my old address book when creating a new profile?

    For some reason my profile quit working on a Win7 computer. I can get my e-mails back but copying the abook.mab over doesn't recover my address book. How can I get my contacts back without having to enter them manually?

    Were you using just Personal Address Book, or had you other user-defined address books?
    I think you might need ''history.mab'' too (this represents Collected Addresses) and any user-defined address books would have names such as ''abook-1.mab'' and so forth.
    But you'll need to import these user-defined address books, and the tool I know for doing this is
    https://nic-nac-project.org/~kaosmos/morecols-en.html

  • How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?

    Hello Guru,
    could you please help with my issue with Fiori Installation.
    We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
    Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
    But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
    But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option  "install Add-on" as it written in Guide for ui add-on installation.
    Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
    If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
    Thanks in advance for any help!!!
    Bets regards,
    Natalia.

    Hello Guru,
    could you please help with my issue with Fiori Installation.
    We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
    Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
    But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
    But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option  "install Add-on" as it written in Guide for ui add-on installation.
    Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
    If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
    Thanks in advance for any help!!!
    Bets regards,
    Natalia.

  • How to generate an Interupt for DMA transfer from Counter on NI-PCI-6602

    dear guys:
          how to generate an Interupt for DMA transfer from Counter on NI-PCI-6602,and I have set the DMA and DMA_INT, and also the global interrupt register.
    but there is no Interupt generated in the Interupt callback function.And when I have set the DMA_INT and global interrupt register ,and then read the relevant register,the relevant bit is also 0.
         I suspect there is an Interupt register contral, like the MITE, you must write the value to 0xc4 for opening .
         there is some codes In my enclosure .What can I do?
    Attachments:
    TEST.C ‏21 KB

    dear Steven_T:
            the registers are In my enclosure ,if you have some ideas,please reply me  first time.thank you !
    Attachments:
    PCI6602.pdf ‏818 KB

  • How to generate BP number for the employee (ECC to CRM) ...

    Hi all,
    can any one give solution for ,how to generate BP number for the employee from ECC to CRM other than active status,as i downloaded employee data from ECC to CRM through ALE/IDOC,as only active employment status employees are got BP number generated,remaining also transfered to CRM but BP number is not generated for those employees,these employee records i can able to see in the HRP5580- HRP5587 tables.
    thanks in advance.
    vamshi.
    Message was edited by:
            vamshidher rao

    Hi,
    Or are you looking for this:
    SELECT serial_number, paaf.assignment_number
    FROM pay_assignment_actions paa, per_all_assignments_f paaf
    WHERE action_status = 'C'
    AND paaf.assignment_id = paa.assignment_id
    AND serial_number IS NOT NULL
    AND SYSDATE BETWEEN paaf.effective_start_date AND paaf.effective_end_date;
    - Viky
    Edited by: Viky on Dec 17, 2010 11:42 AM

  • How To Generate Spool request for a SAP-Script form

    How To Generate Spool request for a SAP-Script form

    Hai   Rahaman,
    After getting the print preview of the SCRIPT.
    Click On  PRINT.
    Buttom of the page one spool request will be generated by system.
    Go to  SP01.
    You Can Find  SPOOL Reqest Number.
    Regards.
    Eshwar.

  • I have an apple account but would like to create a new one for my mum on my computer how do I do this ?

    I Have my own Apple ID on my computer and would like to create a new one for my mum on my computer so I can transfer all her contacts etc. How do I do this ?

    You can create a new iTunes account on your computer's iTunes or you can do it via http://appleid.apple.com : iTunes: How to set up an Apple ID within iTunes
    If you don't want to give credit card details before the account can be used in the iTunes store then follow the instructions on this page : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method

Maybe you are looking for