How to generate data model summary report

Hi,sir,
How can I generate a summary report when I create a server data model in designer 9i as some software did.
I know CA Erwin or Sybase powerdesigner have a good report builder.
It is easy to use. How about designer 9i?
Any tutorial?

Hi,
It's look like you are assuming that an organizational model can be created from external data input via a report. If so, then your assumption is wrong. There is no standard way to create a org. model from external input.
As a standard practice SAP provided a report as mentioned in the previous reply. Using this report you can download ECC/R3 org. model into SAP CRM. This is the easy and best proven way of generating org. model in SAP CRM.
Please let me know, if you need any further clarification
Do not forget to reward if it helps
Regards,
Paul Kondaveeti

Similar Messages

  • How to generate org model through report

    How to generate org model using report .
    please share your information .
    thanks in advance ,
    sapcrm

    Hi,
    It's look like you are assuming that an organizational model can be created from external data input via a report. If so, then your assumption is wrong. There is no standard way to create a org. model from external input.
    As a standard practice SAP provided a report as mentioned in the previous reply. Using this report you can download ECC/R3 org. model into SAP CRM. This is the easy and best proven way of generating org. model in SAP CRM.
    Please let me know, if you need any further clarification
    Do not forget to reward if it helps
    Regards,
    Paul Kondaveeti

  • How to print Data Model in Report??

    Do anyone know how to print Data Model??
    Thanks your help.
    - Frank

    Hi Venkat,
    Thanks alot.... i am checking the appendix k.
    I want to know that if i want to customize the report as per the client requirement,
    can you please let me know which template i will use if i required remittence advice as well as check print data on the layout.
    The following is the list of field i required:
    Vendor ID
    Check Date
    Check number
    invoice date
    invoice/ CR memo number
    invoice description
    invoice gross amount
    invoice discount amount
    invoice net amount
    total gross amount
    total discount amount
    total net amount
    logo
    company name and info
    bank name and info
    check number
    check amount spelled out
    check date
    check amount numeric
    payee name
    CEO signature
    MICR check number
    MICR routing number
    MICR bank account number
    mailing return address
    mailing address
    Venkat it would be great help if you please let me know the exact process to be follow for check printing report.
    I worked on bi publisher report in 11i, but in 12i the process is bit different.
    also if you have any template ready can you please send me on my mail id ... i forwarded you the test mail from my official id or on [email protected]
    Looking forward to your kind response.
    Regards
    Ratnesh

  • How to see data modeller reports in sql developer?

    How to see data modeller reports in sql developer?

    1) export your design to existing schema in Oracle database
    2) define connection to that schema in SQL Developer
    3) find "Data Modeler Reports" in reports window of SQL Developer - probably "design rules" are more interesting here
    Philip

  • Copy data models and reports from BW 3.1 to NW 2004s

    Hi experts,
    Our client has two BW servers: BW 3.1 and BI 7. BW 3.1 contains lots of data models and reports. And the BI 7 server is newly installed.
    Now we want to copy these data models and reports from BW 3.1 to the new BI 7 server. Are there any solutions for this?
    Thank you very much in advance.

    Hi Frank,
    Sounds like a cross version transport is needed.
    This is a solution we have used to do what you want to do:-
    Create and release a transport as per normal.
    Copy and transport the files from the source system (BW 3.1) e.g /usr/sap/trans/data & /usr/sap/trans/cofiles to the same folders on the target system.
    Basis help is needed here.
    From here onwards using stms_import should help you in the normal manner.
    Works a treat.
    Have transported the following all correctly appearing as 3.x data models in NW2004s.
    DSO objects.
    Cubes
    Transfer/Update rules
    Reports.
    Cheers,
    Pom

  • How to exctract data from a report to use it in a process

    Hi! I would like to know how to exctract data from a report to use it in a process. Let's say that I have a report which have following fields: id_person, name_person. And then, I want to make a process which introduce the id_person (from report) into an associative tabel. How can I reffer to the fields from my report?
    I was thinking about something like that( this should be the code from my process)
    insert into associative_table(id_person)
    values(id_person) or
    insert into associative_table(id_person)
    values(Report_name.id_person) but it doesn't work....
    Thank you very much.

    Another option, use collections.
    Create an on load process that loads all the rows you would have in your report into a collection:
    begin
    HTMLDB_COLLECTION.CREATE_OR_TRUNCATE_COLLECTION(
    p_collection_name => 'ASSIGNED_CALENDAR_CONTACTS' );
    for x in (SELECT CONTACT_ID, CONTACT_FNAME, CONTACT_LNAME
    FROM CONTACT
    WHERE InStr( pkg_CalendarMgr.f_FetchContactIDsForDay( TO_DATE( :P3_CALENDAR_DT, 'YYYYMMDD' ), 'OF' ), CONTACT_ID ) > 0 )
    loop
    htmldb_collection.add_member(p_collection_name => 'ASSIGNED_CALENDAR_CONTACTS',
    p_c001 => x.CONTACT_ID,
    p_c002 => x.CONTACT_FNAME,
    p_c003 => x.CONTACT_LNAME);
    end loop;
    end;
    Then, instead of your report selecting from the table, have it select from the collection, this way your display will match what's in the collection:
    SELECT c001, c002 || Chr(32) || c003 CONTACT_NAME, 'Remove' remove
    FROM htmldb_collections
    WHERE collection_name = 'ASSIGNED_CALENDAR_CONTACTS'
    ORDER BY c003, c002
    Then you can have a button on the form that steps through the collection, one element at a time and does whatever you want it to.

  • Error to open a data model in Report builder (Word)

    Dear all,
    Im troubles when i try to open a data model in Report Builder (Word). Someone know about this problem?
    The message is: A error has ocurred. Check the settings and try again.
    Any suggestion?
    Thanks for all!

    I've also got this error several times. Usually the reason is an error in the Publisher query (or data template). It's better to first test (view) that you get a proper xml-output in Publisher, and only after that try to create an rtf-template. If this doesn't work, I usually start from the beginning, and first make a very simple report, then try the template, and if it works, then gradually increase elements for the Publisher side. Sometimes I haven't got any idea why it didn't work at the first place, when it then works after beginning from the simple report.

  • MCTS 70-466 Implementing Data Models and Reports with Microsoft SQL Server 2012

    I am searching for training kit for Exam 70-466 (Implementing Data Models and Reports with Microsoft SQL Server 2012) but I think is not published yet. I was expecting its release in Jan or Feb 2014. Would any one can tell me its release date or any place
    where I can find this book.
    Thanks
     

    Hi Azhar lqbal Gondal,
    According to your description, since the issue regards training and certification,
     I suggest you post the question in the Learning forums at
    http://social.technet.microsoft.com/Forums/en-US/home?category=learning. It is appropriate and more experts will assist you. If you have a specific technical question about Microsoft SQL Server,
     you can visit and post your question on  the SQL Server Forum.
    There is some detail about Exam 70-466 Implementing Data Models and Reports with Microsoft SQL Server 2012, you can review the following articles.
    Exam content can be found here:
    http://www.microsoft.com/learning/en-us/exam-70-466.aspx
    http://borntolearn.mslearn.net/certification/database/w/wiki/525.466-implementing-data-models-and-reports-with-microsoft-sql-server-2012.aspx#fbid=Mn-t6aRhs-H
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • How to Transper data Model Node to Vallue Node

    Hi Friends
    I am getting problem in Create the Check box in Table
    I am getting model node from ECC System(Zmmoa_Pending_Getlist_Input)
    This is path for attributes avaliable
    Zmmoa_Pending_Getlist_Input-Output-outtab 
    Under outtab  all attributes available
    My Requrement is display Check box. So I am doing like this I will care one more Vallue Node (OutTab_1) under this Vallue Node I put I have node attributes.here I careate one Check boxdatatype --Boolean(i.e Under outtab attributes)
    Now I will get data from ModelNode and send that data to Vallue Node(by this node that data display in table formate.Eache Row Having Check box)
    So I have to this Code But Data is Not getting in Vallunode table
    in FirstView
    in Submit Button
    public void onActionGetData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
        //@@begin onActionGetData(ServerEvent)
        //$$begin ActionButton(1164287125)
        //wdThis.wdGetExamp2CompController().checkSRA();
         wdThis.wdGetExamp2CompController().checkBox();
        wdThis.wdFirePlugToSV();
        //$$end
        //@@end
    This is code writen in CC
    public void checkBox( )
        //@@begin checkBox()
        //Date today = new Date(System.currentTimeMillis());
        IWDMessageManager mes = wdComponentAPI.getMessageManager();
        try
             Zmmoa_Pending_Getlist_Input input1 = new Zmmoa_Pending_Getlist_Input();
             wdContext.nodeZmmoa_Pending_Getlist_Input().bind(input1);        
              wdContext.currentZmmoa_Pending_Getlist_InputElement().modelObject().execute();
              wdContext.nodeOuttab().invalidate();
    //          IPrivateExamp2Comp.IOutTab_1Element elem = wdContext.nodeOutTab_1().getOutTab_1ElementAt(i);         
             //mes.reportSuccess("Input:" +wdContext.nodeOuttab().size());
                      for (int i =0; i < wdContext.nodeOuttab().size(); i++)
                   //mes.reportSuccess("Input Of I:" +wdContext.nodeOutput().size());
                   //mes.reportSuccess("Input:" );
                   IPrivateExamp2Comp.IOuttabElement  elem = wdContext.nodeOuttab().getOuttabElementAt(i);
                   //wdComponentAPI.getMessageManager().reportSuccess("elem::  "+elem);
                   IPrivateExamp2Comp.IOutTab_1Element result = wdContext.nodeOutTab_1().createOutTab_1Element();
             //Zbapiresult result = new Zbapiresult();
             result.setCheckBox(false);
             result.setConf_Shp_Date(elem.getConf_Shp_Date());        
              wdComponentAPI.getMessageManager().reportSuccess("Conf_Shp_Date::  "+elem.getConf_Shp_Date());
             result.setExpt_Shp_Date(elem.getExpt_Shp_Date());
             result.setMaterial(elem.getMaterial());
             result.setMatl_Desc(elem.getMatl_Desc());
             result.setOa_Quantity(elem.getOa_Quantity());
             result.setOpn_Quantity(elem.getOpn_Quantity());
             result.setPo_Item(elem.getPo_Item());
             result.setPo_Number(elem.getPo_Number());
             result.setPo_Status(elem.getPo_Status());
             result.setPur_Group(elem.getPur_Group());
             result.setStat_Date(elem.getStat_Date());
             result.setQuantity(elem.getQuantity());
             wdContext.nodeOutTab_1().addElement(result);
         catch(Exception e)
                   mes.reportException(e.getMessage(), false);
        //@@end
    can u help me
    how to Transper data Model Node to Vallue Node. By using vallue node that data will display in table format with Check box.
    I need data display in table format with Check box
    Regards
    Vijay Kalluri

    Hi Vijay,
    TO copy values from Model Node to Value Node use the copyElements() method of the WDCopyService API. To acheive this, the name and type of the attibutes in the Value Node should be same as Model node attributes.
    Example: -
    Model Node <----
    > Value node
    ---Name-String                                       ---Name - String
    ---Number-Integer                                  ---Number -  Integer.
    then use the following statement:
    WDCopyService.copyElements(wdContext.node<ModelNode>(),wdContext.node<ValueNode>());
    This will copy all the values.
    Regards,
    Poojith MV

  • How to save data model design in pdf or any format..?

    how to save data model design in pdf or any format..?
    i ve created design but not able to save it any mage or pdf format

    File -> Print Diagram -> To PDF File

  • Generate Data model from Class model

    I am using JDeveloper uml features for a first time, so I am interested if there is a option that I can generate class model to the data model.
    If I have class model and than when right-click select Generate , there is a option to generate data model from it.
    But it is dimmed. Is there any precondition to achieve before this option become possible.
    Thanks in advance .

    The link you mentioned has the Prerequisites,
    Do include all the jar in you path.
    It will resolve all your issues.

  • How the queries gets processed in data model of report

    In a report for e.g there are four queries in data model.
    In the first query there is a group there we are calculating the value of a formula column c_currency.
    In c_currency for set of values we are calculating :p_curr.
    :p_curr is a global variable i.e user parameter.
    So :p_curr is getting used in format trigger of next group in second query.
    So the first query will execute for suppose 15 set of values.
    So :p_curr wil not retain the values for all that 15 sets of values or it will each time overwrite the value?
    or whether the first query will execute for first set of value pass to next query then execute for 2nd set.or will it execute all set and will pass :p_curr to next query?

    This has nothing to do with the number of tables in your query. Search for the error message in the Reports help and you find this:
    Cause:     You are attempting to default a layout that, if created using current settings, would be too large to fit within the defined height and width of a report page.
    Action:     Go back to the Report Wizard and reduce the values of default settings (e.g., shorten some field widths). Alternatively, you can increase the size of a report page using the Report property palette. Then redefault your layout. Continue making adjustments as necessary.

  • How to generate a row in report to compute total?

    Hi:
    I need help to generate a report. In an accounting report, I need to make sum for each client regarding outstanding balance. The format of report is following:
    invoice#, invoice date, invoice amount, paid amount paid date, write off, outstanding balance
    Client Name: Baker Express / Debtor Name: Kurt Weiss inc.
    137308001, 04/18/2012, 438.07, 537.07, 06/05/2012, , (99)
    137308002, 04/18/2012, 100, 90, 06/05/2012, 10,
    client Total: total payment:627.07, total outstanding balance: (99)
    another client and debtor pair
    My question is how to generate total payment and total outstanding balancefor every pair of client and debtor. And there are multiple pairs. I tried to use group by, but how can I display every invoice tuple as well in the report?
    Any help would be appreciated.
    Sam

    One method would be to use ROLLUP in your SQL
    http://www.oracle-base.com/articles/misc/rollup-cube-grouping-functions-and-grouping-sets.php

  • How to get data model to recognize structure change

    I have an extremely complex report that was built almost entirely manually -- except for using the Data Wizard to create the Data Model (multiple queries with multiple groups). The source view that the query Q-1 is based on has changed. It is a change in the precision of the column. How do I get the data model to notice that change? The Width in the Property Palette is still showing 8 when it should now be 16. This is causing the display on the report to be truncated to 8 characters.
    I don't want to have to rebuild the data model. It took me 3 days to get it so that it works!
    Thanks

    PLS OPEN THE QUERY AND THEN CONNECT USING YOUR USER. I THINK WHEN YOU REFRESH THE QUERY AND CONNECT THEN WIDTH IS CHANGE AS THE COLUMN IN THE DATABASE.(i.e. 16)
    THANKS,
    FAROOQ Thanks for the suggestion. Unfortunately, the same thing happens when I do this as happens if I modify the query with a space (as before); the rows are removed from their groups, and I lose the Source of my calculated fields.
    If anyone is interested, I finally found a way to do this:
    1. Convert the report into a text file (File>Administration>Convert);
    2. open the text file in a text editor;
    change the offensive WIDTH settings (make sure to look for all of them);
    3. save the text file;
    4. then convert it back to a RDF file using the converter.
    A round-about way to perform what should be an automatic operation -- but there it is.
    --V                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • How to Import data models into BPA

    How can data models be imported into BPA? We understand that models can be imported from other
    BPA repositories. We need to import from something that does not start out as a BPA model. We know how to import the data objects using the Process Generator. But do not understand how to efficiently import Cluster or entity objects (representing tables) connected to ERM Attrribute objects (representing fields). Currently only an EPC model can be imported using the process generator. We've tried importing structures using UML import of class models, but the resulting model is not usable in standard data models.
    Any ideas?

    Have a look on this thread:
    Issues Importing BW Model in HANA Studio
    Regards,
    Krishna Tangudu

Maybe you are looking for