How to generate datasource for inforsource in BW 7
Hi all:
Could you please tell me how to generate datasource for inforsource in BW7, it seems that the way
is different from other lower edition BW 3.x. Should I choose Tranformation ? and then how ?
Thank you very much!
Edited by: jingying Sony on May 9, 2009 8:41 AM
1) First thing is that in BI 7.x the infosource is optional.You can directly create a transformation between datasource and data target (e.g. cube). If you still want to use a infosource then you will require 2 transformations. 1 will act as a transfer rule and other one will act as a update rule. This is a crude example showing the comparision between 3.x and 7.x.
2) Infopackage in 7.x will load the data only till PSA. From PSA to data target you will need DTP. DTP will load data from PSA to data target. So you need to ensure you create a complete flow from datasource to data target and create infopackage & DTP.
Similar Messages
-
How to generate sitemap for SiteStudio sites. Is there any component avai
How to generate sitemap for SiteStudio sites. Is there any component available?
We want to create xml having list of all site URLS for SEO purpose.
Is there any way to achieve this ?
ThanksSiteStudio comes with SiteMap fragments. Change the page template so it is a document type XML, add the fragment and you're practiacally done.
-
How to generate Billing for Service Order ?
how to generate Billing for Service Order ?
Hello,
You may do a resource related billing from the service order, but you need to maintain Resource Related billing profile in Service order --> Control tab. Once it is set you may generate the billing document (debit memo) from service order through DP90, provided the config is right.
Prase -
How to create DataSource for FlatFile Source Systems
Hi,
I am practicing BI7.I am familiar with BW 3.5 but while practicing BI7 i am facing some problems.I am trying to load master data of an infoobject (STUDENTID) STUDENTID ATTR.
After creating Appl Comp and when i am trying to create transformations for the master data attribute i am unable to assign data source.I came to know that i have to create datsource at this step.But dont know how to create datasource for FlatFiles.
Can anyone give me stpes how to create DataSource.
Thanks in advance,
SunnyHi
Find below help link for procedure
http://help.sap.com/saphelp_nw04s/helpdata/en/43/01ed2fe3811a77e10000000a422035/frameset.htm
and below are some help links which will be usefull in BI7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Look at this new features in Bi 7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
how to's in BI 7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Demo's
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c [original link is broken]
Report designer new component
Most of ur solutions u can get through help or SDN search
Regards,
Ravi -
How to generate Barcode for Storage Bins
Hi,
How to generate Barcode for the all the newly created storage bins in order to get scanned with the RF devices.
Thanks and regards,
I.Jacob MiltonHello Jacob,
We generate our barcodes with the help of the PPF action. For example, our labels have the barcodes onto them and when we finish a task that requires packing/unpacking/deconsolidation we have the PPF trigger the printing of the neccesary labels.
I direct you to the path SCM SPRO - Supply Network Collaboration - Tools - Actions (Post Processing Framework). Here you need to set the action and namely the trigger.
All the best,
Claudiu Maxim -
How to Generate 997 for different trading partner with different Interchang
How to Generate 997 for different trading partner with different InterchangIDS
We are planning to use same working “ABC -> XYZ (Host)” 850 “ecs” file even for “EFG -> XYZ (Host)” 850 Transaction. And we have successfully implemented without any issues.
We wanted to send 997 Acknowledgement in case of “EFG -> XYZ (Host)” 850 transaction.
In this case also we would like to use same “ecs” file which has been used for “XYZ (Host) -> ABC”.
After adding the 997 capabilities to Stanley I don’t see any extra capability added to “XYZ (Host)” trading partner.
The generated 997 for Stanely EDI file doesn’t reflect the “XYZ (Host)” trading partner Interchange ID. It is getting reflected the previous 997 Transaction “XYZ (Host)” Intercahnge ID.
We use following Interchange ID’s
ABC = 005381447
XYZ (Host) = 049894764
EFZ = SWEOT30013
XYZ (Host) = 5273851T
The 997 which is generated has the InterchangeID as this “049894764” instead of “5273851T”
Regards
RaviHi Ravi,
You have to have the two Delivery Channels under Host TP's communication capability. One host delivery channel should be used with one TP only and will have specific values to that TP.
Go to the Exchange Protocol Parameters of Host TP (XYZ) delivery channel (which you are using in the agreement with EFZ) and provide the required values here. Revalidate and redeploy the agreements and run a test. Let us know if you still face issue.
Regards,
Anuj -
How to generate report for Service sheet - ECC 6.0
Hi
Can anyone let me know regarding how to generate reports for service sheets entered
regards
SanjayHi,
Get Service Entry Sheet with following T.codes:
1.MSRV6
2.ML84
Regards,
Biju K -
How to generate client for GetFile service of Webcenter Content Management.
How to generate client for GetFile service of Webcenter Content Management.
Downloaded file : GetFile.wsdl
<?xml version="1.0" encoding="utf-8" ?>
- <definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.stellent.com/GetFile/" targetNamespace="http://www.stellent.com/GetFile/" xmlns="http://schemas.xmlsoap.org/wsdl/">
- <types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://www.stellent.com/GetFile/">
- <s:element name="GetFileByID">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="dID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="rendition" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="extraProps" type="s0:IdcPropertyList" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFileByIDResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetFileByIDResult" type="s0:GetFileByIDResult" />
</s:sequence>
</s:complexType>
</s:element>
- <s:complexType name="GetFileByIDResult">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="FileInfo" type="s0:FileInfo" />
<s:element minOccurs="0" maxOccurs="1" name="downloadFile" type="s0:IdcFile" />
<s:element minOccurs="0" maxOccurs="1" name="StatusInfo" type="s0:StatusInfo" />
</s:sequence>
</s:complexType>
- <s:element name="GetFileByName">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="dDocName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="revisionSelectionMethod" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="rendition" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="extraProps" type="s0:IdcPropertyList" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFileByNameResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetFileByNameResult" type="s0:GetFileByNameResult" />
</s:sequence>
</s:complexType>
</s:element>
- <s:complexType name="GetFileByNameResult">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="FileInfo" type="s0:FileInfo" />
<s:element minOccurs="0" maxOccurs="1" name="downloadFile" type="s0:IdcFile" />
<s:element minOccurs="0" maxOccurs="1" name="StatusInfo" type="s0:StatusInfo" />
</s:sequence>
</s:complexType>
- <s:complexType name="FileInfo">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="dDocName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocTitle" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocType" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocAuthor" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dSecurityGroup" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocAccount" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dRevClassID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dRevisionID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dRevLabel" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dIsCheckedOut" type="s:boolean" />
<s:element minOccurs="0" maxOccurs="1" name="dCheckoutUser" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dCreateDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dInDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dOutDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dStatus" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dReleaseState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dFlag1" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dWebExtension" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dProcessingState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dMessage" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dReleaseDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dRendition1" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dRendition2" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dIndexerState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dPublishType" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dPublishState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dIsPrimary" type="s:boolean" />
<s:element minOccurs="0" maxOccurs="1" name="dIsWebFormat" type="s:boolean" />
<s:element minOccurs="0" maxOccurs="1" name="dLocation" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dOriginalName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dFormat" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dExtension" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dFileSize" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="CustomDocMetaData" type="s0:IdcPropertyList" />
</s:sequence>
</s:complexType>
- <s:complexType name="StatusInfo">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="statusCode" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="statusMessage" type="s:string" />
</s:sequence>
</s:complexType>
- <s:complexType name="IdcPropertyList">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="property" type="s0:IdcProperty" />
</s:sequence>
</s:complexType>
- <s:complexType name="IdcProperty">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="name" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="value" type="s:string" />
</s:sequence>
</s:complexType>
- <s:complexType name="IdcFile">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="fileName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="fileContent" type="s:base64Binary" />
</s:sequence>
</s:complexType>
</s:schema>
</types>
- <message name="GetFileByIDSoapIn">
<part name="parameters" element="s0:GetFileByID" />
</message>
- <message name="GetFileByIDSoapOut">
<part name="parameters" element="s0:GetFileByIDResponse" />
</message>
- <message name="GetFileByNameSoapIn">
<part name="parameters" element="s0:GetFileByName" />
</message>
- <message name="GetFileByNameSoapOut">
<part name="parameters" element="s0:GetFileByNameResponse" />
</message>
- <portType name="GetFileSoap">
- <operation name="GetFileByID">
<input message="s0:GetFileByIDSoapIn" />
<output message="s0:GetFileByIDSoapOut" />
</operation>
- <operation name="GetFileByName">
<input message="s0:GetFileByNameSoapIn" />
<output message="s0:GetFileByNameSoapOut" />
</operation>
</portType>
- <binding name="GetFileSoap" type="s0:GetFileSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
- <operation name="GetFileByID">
<soap:operation soapAction="http://www.stellent.com/GetFile/" style="document" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
- <operation name="GetFileByName">
<soap:operation soapAction="http://www.stellent.com/GetFile/" style="document" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
</binding>
- <service name="GetFile">
- <port name="GetFileSoap" binding="s0:GetFileSoap">
<soap:address location="http://localhost:7101/_dav/cs/idcplg" />
</port>
</service>
</definitions>Hi,
I would suggest you to check the time recording functionality, see
details in:
http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/en/d5/299631364d4e959
c6609ca3bc24740/content.htm
Another possibility is configuring the Service Level Agreement, see
details in SDN blog:
Service Desk: SLA configuration hints
https://weblogs.sdn.sap.com/pub/wlg/24813
or
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/24813
Thanks
Regards,
Vikram -
How to create DataSource for BI Source System in RSA1?
I have a BI Source System defined, however I can't figure out a way to create a new DataSource for it. I can create DataSource objects for all my other Source Systems, but I can't figure out how to do this for this BI system.
I select my BI Source System, right-click, choose "Display DataSource tree". When I right-click from the DataSource tree, I expect to get "Create Application Component" and "Create DataSource" options, but instead I only see "Replicate Tree Metadata" and "Replicate DataSources" options.
How can I create DataSource objects for my BI system?Hi,
I guess you want to create a custom developed source in BI itself. For that you need to create the data source in RSO2 and inside you need to give the specific aplication component under which you want this DS to be in. Generate a data souce and then go to BI My self Source system and then replicate that particular appl component o view your data source.
Hope this helps
Regards,
Srini -
How to generate WebServices for PL/SQL Packages
I have the following issue trying to generate WS for a selected set of operations within a PL/SQL package
If I use the option -sql PKG_TEST then I am getting all operations within a package.
I just want to expose a certain number of procedures ( e.g. PROC1 and PROC2 )
It works only if I specify
-sql PKG_TEST(PROC1)
when I use -sql PKG_TEST(PROC1, PROC2) it gives me errors.
I have Oracle JDeveloper (10.1.3.2) (Build 4066) .
I used wsa with an plsqlAssemble option
java -jar wsa.jar -plsqlAssemble
-appName myApp
-packageName myPckg
-sql PKG_TEST(PROC1)
-dataSource jdbc/ds
-dbConnection jdbc:oracle:thin:@zzzz:1521:mydb -dbUser user/passw
-style rpc
-use literal
Thanks,
Michael HitrikEric,
Thanks a lot for your help.
I was able to follow all of your recommendations
I was able to produce the single ear file for multiple PL/SQL packages .
Now I have the last step ( I hope :-) - WS-SECURITY
What is your recomendation for Security - specifically for WebServices for PL/SQL Packages ?
I would like to do the following:
CLIENT CODE:
* Create a XML element with user name, password, &
* datasource as child elements.
* Element will look like this:
* <credetials>
* <username>scott</username>
* <password>tiger</password>
* <datasource>jdbc/OracleCoreDS</datasource>
* </credentials>
Document doc = new XMLDocument();
Element elAdd = doc.createElement( "credentials");
Element elA = doc.createElement( "username");
Element elB = doc.createElement("password");
Element elC = doc.createElement("datasource");
elA.appendChild(doc.createTextNode("scott"));
elB.appendChild(doc.createTextNode("tiger"));
elC.appendChild(doc.createTextNode("jdbc/OracleCoreDS"));;
elAdd.appendChild(elA);
elAdd.appendChild(elB);
elAdd.appendChild(elC);
doc.appendChild(elAdd);
Element e = doc.getDocumentElement();
// Create an intance of the proxy
EmployeeProxy proxy = new EmployeeProxy();
// Create a Header objecy
Vector v = new Vector();
v.add (e);
Header hdr = new Header();
hdr.setHeaderEntries(v);
// Set the Header
proxy._setSOAPRequestHeaders(hdr);
SERVER CODE:
public void processHeaders(Header header)
throws java.io.IOException,
oracle.xml.parser.v2.XSLException
// Get all the Elements
Vector entries = header.getHeaderEntries();
Element e = (Element) entries.firstElement();
System.out.println("Element received from SOAP header is: " );
((XMLElement)e).print(System.out);
// Get independent nodes and retrieve node values.
Node userNode;
userNode = ((XMLNode)e).selectSingleNode("username");
userName = ((XMLElement)userNode).getText();
Node passwordNode;
passwordNode = ((XMLNode)e).selectSingleNode("password");
password = ((XMLElement)passwordNode).getText();
Node dsNode;
dsNode = ((XMLNode)e).selectSingleNode("datasource");
datasourceName = ((XMLElement)dsNode).getText();
System.out.println("User name is: " + userName);
System.out.println("Password is: " + password);
System.out.println("Datasource is: " + datasourceName);
How can this be done with the generated code using wsa tool ?
Any other suggestions ?
Thanks,
Michael -
How to generate XML for following?
Hello Everyone,
I have following snippet of PLSQL code with for loops and record type arrays. Each loop can return separate number of rows and iterate that many times. For e.g. the for loop tab_rec may fetch 50 rows where as the for loop sql_rec may return 80 rows.
I need to acoomodate all of these record arrays into a single xml file. Each for loop will repreesent one data set. Something like this.
<dataset>
<set value = tab_rec(kounter).tvalue >
<set value = ?
</dataset>
Questions:
1) How can I dynamically generate just one single XML file for all for loops metnioend below in this message?
2) How can I dynamically generate tags for e.g. <set> tag above if I put XMLELEMENT() under a for loop kounter. To explain this in a better way consider pseudo code example below.
for i in 1..kounter loop
<dataset>
<set value = tab_rec(i).tvalue >
*<set value = *?* -- How do i generate these <set> tags when tebrec(i).value will return many rows?*_
</dataset>
Thanks for reading this post. Again, the exmple for loops to generate one single XML file is given below.
For loops in the issue are mentioned below
FOR a IN tab_recc
LOOP
tab_rec (tab_kounter).tsegment := a.ebs_table;
tab_rec (tab_kounter).tbytes := a.sizemb;
tab_kounter := tab_kounter + 1;
END LOOP;
FOR b IN sql_recc
LOOP
sql_rec (sql_kounter).thash := b.hash_value;
sql_rec (sql_kounter).texecution_read := b.reads_per_execution;
sql_kounter := sql_kounter + 1;
END LOOP;
FOR c IN sess_recc
LOOP
sess_rec (session_kounter).tsid := c.SID;
sess_rec (session_kounter).tvalue := c.VALUE;
session_kounter := session_kounter + 1;
END LOOP;
FOR d IN user_recc
LOOP
user_rec (dbuser_kounter).tphysical_reads := d.physical_reads;
user_rec (dbuser_kounter).tuser := d.username;
dbuser_kounter := dbuser_kounter + 1;
END LOOP;
FOR e IN ebs_user
LOOP
ebs_rec (ebs_kounter).tuser := e.user_name;
ebs_rec (ebs_kounter).ttime := e.rtime;
ebs_kounter := ebs_kounter + 1;
END LOOP;Sorry for delay in response.
I have pasted the complete code that will show the relation ship between data and XML. What I am trying to do here is to prepare smal packets of XML through XML element and then roll it up to a final grand CLOB variable. and pass that through XML creation. I have used DBMS_JAVA package to append clobs.
The issue now I am running into, it generates JUNK in xml. pure junk and nothing else Thanks R,
FOR a IN tab_recc
LOOP
tab_rec (tab_kounter).tsegment := a.ebs_table;
tab_rec (tab_kounter).tbytes := a.sizemb;
tab_kounter := tab_kounter + 1;
END LOOP;
FOR b IN sql_recc
LOOP
sql_rec (sql_kounter).thash := b.hash_value;
sql_rec (sql_kounter).texecution_read := b.reads_per_execution;
sql_kounter := sql_kounter + 1;
END LOOP;
FOR c IN sess_recc
LOOP
sess_rec (session_kounter).tsid := c.SID;
sess_rec (session_kounter).tvalue := c.VALUE;
session_kounter := session_kounter + 1;
END LOOP;
FOR d IN user_recc
LOOP
user_rec (dbuser_kounter).tphysical_reads := d.physical_reads;
user_rec (dbuser_kounter).tuser := d.username;
dbuser_kounter := dbuser_kounter + 1;
END LOOP;
FOR e IN ebs_user
LOOP
ebs_rec (ebs_kounter).tuser := e.user_name;
ebs_rec (ebs_kounter).ttime := e.rtime;
ebs_kounter := ebs_kounter + 1;
END LOOP;
FOR aa IN 1 .. tab_kounter
LOOP
if aa = 1 then
SELECT XMLELEMENT
("dataset",
xmlattributes (v_top50id1 AS "Id"),
XMLELEMENT ("set",
xmlattributes (aa AS "Id",
tab_rec (aa).tsegment AS "value"
).getclobval ()
INTO tablob --clob type
FROM DUAL;
end if;
END LOOP;
FOR bb IN 1 .. sql_kounter
LOOP
if bb = 1 then
SELECT XMLELEMENT
("dataset",
xmlattributes (v_top50id2 AS "Id"),
XMLELEMENT ("set",
xmlattributes (bb AS "Id",
sql_rec (bb).thash AS "value"
).getclobval ()
INTO sqlob --clob type
FROM DUAL;
end if;
END LOOP;
FOR cc IN 1 .. session_kounter
LOOP
if cc= 1 then
SELECT XMLELEMENT
("dataset",
xmlattributes (v_top50id3 AS "Id"),
XMLELEMENT ("set",
xmlattributes (cc AS "Id",
sess_rec (cc).tsid AS "value"
).getclobval ()
INTO sesslob --clob type
FROM DUAL;
end if;
END LOOP;
FOR dd IN 1 .. dbuser_kounter
LOOP
if dd = 1 then
SELECT XMLELEMENT
("dataset",
xmlattributes (v_top50id4 AS "Id"),
XMLELEMENT ("set",
xmlattributes (dd AS "Id",
user_rec (dd).tuser AS "value"
).getclobval ()
INTO dbulob --clob type
FROM DUAL;
end if;
END LOOP;
FOR ee IN 1 .. ebs_kounter
LOOP
if ee = 1 then
SELECT XMLELEMENT
("dataset",
xmlattributes (v_top50id5 AS "Id"),
XMLELEMENT ("set",
xmlattributes (ee AS "Id",
ebs_rec (ee).tuser AS "value"
).getclobval ()
INTO ebslob --clob type
FROM DUAL;
end if;
END LOOP;
SELECT XMLELEMENT
("Chart",
xmlattributes (v_caption AS "caption",
v_subcaption AS "shownames",
v_xaxisname AS "showvalues",
v_yaxisname AS "decimals"
XMLELEMENT ("categories",
XMLELEMENT ("category",
xmlattributes (v_label1 AS "label")
XMLELEMENT ("category",
xmlattributes (v_label2 AS "label")
XMLELEMENT ("category",
xmlattributes (v_label3 AS "label")
XMLELEMENT ("category",
xmlattributes (v_label4 AS "label")
XMLELEMENT ("category",
xmlattributes (v_label5 AS "label")
XMLELEMENT ("category",
xmlattributes (v_label6 AS "label")
tablob, --clob type
sqlob, --clob type
sesslob, --clob type
dbulob, --clob type
ebslob --clob type
).getclobval ()
INTO v_top50 --clob type
FROM DUAL;
DBMS_LOB.append (v_xmlmessage, v_top50); --both are clob type
v_filename := 'Top50.xml';
writexml (p_dir_path => v_dir_path,
p_filename => v_filename,
p_xml => v_xmlmessage
); -
How to find datasource for cube 0BCS_C11
Now we plan to do BCS. We want to create a cube ZBCS_C11 to copy real-time cube 0BCS_C11, the question is how to find datasource? Is there any standard datasource? Pls info, thanks!
hi,
For reporting purposes, you can use the virtual InfoCube 0BCS_VC11 u2013 Consolidation (Company/Consolidation Profit Center). It shares the same structure as InfoCube 0BCS_C11.
go through this link.
http://help.sap.com/saphelp_nw70/helpdata/EN/05/fdce0e59a82b4da957ead6e8022233/frameset.htm
regards
vadlamudi -
How to generate csr for third party code signing cert?
I've been reading about code signing, but can't see how to generate a csr to use with a third party CA. Does someone have a tutorial, link, suggestion?
Hi,
Here is an document which discussed on how to implement code signing with using third party certificate for you reference:
http://download.microsoft.com/download/a/f/7/af7777e5-7dcd-4800-8a0a-b18336565f5b/best_practices.doc
For further suggestions, it is recommend you to get further support in the MSDN Forum so that you can get the most qualified pool of respondents.
http://social.msdn.microsoft.com/forums/en-US/categories/
Thanks
Tiger Li
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
How To Generate XSL for integration from WSDL
Hi,
Can anybody help me to how to generate XSL from WSDL file for Integration.....
ThanksYou can use Oracle JDeveloper to general XSL against WSDL or some XML tool like XML Spy. There are lots of XSL tools available to do this (some embedded in Eclipse we well)
-
How to generate license for AIP-SSM without PAK-number?
Hello! I’m sorry for my English. I have a problem with generating license for AIP-SSM. My contract with SMARTnet service is activated, but I don’t have a PAK-number. How I can generate a license for updating my module?
Alternatively you can always write an email to [email protected] with your serial number and they should be able to provide you the license for any cisco device.
Sachin
Maybe you are looking for
-
Blank Screen with cursor after login Windows 7, Unable to start new tasks
My problem is similar to the well know Windows 7 Black Screen as referenced by Prevx, though different. When I boot my Windows 7 computer, the login screen appears as always. Following entering the password for default user, the screen will give the
-
Presentation Director loses settings when switching between Chinese and English
I've done the "Install files for East Asian languages" and then set the "Language for non-Unicode programs" to "Chinese (PRC)". I do this for our presales people so they can show our prospects that our software is translated (for those that have plan
-
I have two users on my iMac which is running Lion. I am trying to share files between users. I have followed the instructions in help and am getting nowhere (after about an hour and a half). Can anyone help?
-
Make changes to the line item depending upon doc type n sp. GL ind in F-48
I want to make changes to the line item depending upon the document type and special GL indication for the transaction code F-48. Depending upon document type and special GL indicator i want to calculate the work contract tax during simulation in tra
-
I have Iphone 5S and I never updated from IOS 7.1.2 to IOS 8 and now this morning I noticed that IOS 8.0.1 was available but since it had bugs it was removed, so can anyone tell me if I can update to IOS 8 not 8.0.1 but just IOS 8?