How To Generate Early watch report Using SDCCN
Hi Guys,
Can any body please provide me brief knowledge on " how to generate an Early Watch Report using SDCCN"
infact i have searched in the forums but not very much clear.
Thanks,
LAX
This may not be the appropriate forum for this question. You may want to consider posting your question on the SAP NetWeaver Administration forum instead.
Having said that, the following may help:
OSS Note 763561 - Service Data Control Center (SDCCN) - FAQ
Similar Messages
-
How to generate "Early watch report uisng sdccn"
Hi Guys,
Can any body please provide me brief knowledge on " how to generate an Early Watch Report using SDCCN"
infact i have searched in the forums but not very much clear.
Thanks,
LAXHi,
can you look at this
[EWA|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fnetweaver%2fs-u%2fsolutionManager4.0-HowtogenerateEWA%E2%80%99sFromSatelliteSystems.pdf]
[http://sapnetweavernotes.blogspot.com/2008/04/sap-earlywatch-alert.html]
[https://service.sap.com/earlywatch]
For taking EWA report through solution manager, you have to perform satelite system configuration. Please check the below link which have tutor files, related step by step documents for EWA.
[http://www.service.sap.com/rkt-solman]--> select ur component version --> <Technology Cons. & System Admin.> select EWA
763561 -- More information about SDCCN can be obtained here.
91488 --- SAP Support Services- Central preparatory note.
Regards,
Muralidhar -
How to generate a PDF report using ADF RichTable?
Hi,
I am using JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660. I am displaying my data from db in a JSF Fragment(JSFF) using ADF RichTable component. Actually now I want to generate a PDF report using that data shown in the table on click of a Generate Button. Can anyone please provide me code or sample for that?
Thanks,
Vikashttp://kohlivikram.blogspot.com/2009/04/generate-pdf-report-in-adf.html
Thanks,
Navaneeth -
How to generate a single report using multiple Databases
Hi All
Is it possible to create a single report using multiple databases
I am working on Database A to generate reports usually,, but now i have a second database for which the data is coming from flat files now i have to use few tables from
Database B to generate a single report,,,,, can any one help with the processHi,
i didn't see this properly in your post:
but now i have a second database for which the data is coming from flat files if you have ETL then make flat files as source then create target tables in db:B itself.. .Now, import them in the rpd..
If not, import both those tables into rpd with different connections..
Create physical joins by selecting those tables and perform joins operations over db's in physical layer.. -
How to configure Early watch report in SOLMAN
I recently got chance to work on SOLMAN. Anyone could just point me in a right direction from where I can start to configure systems for early watch alert in SOLMAN.
ThanksHi Bill,
Check the below link
http://help.sap.com/saphelp_sm40/helpdata/EN/a4/a0cd16e4bcb3418efdaf4a07f4cdf8/frameset.htm
do check the below use ful URL:
http://help.sap.com/saphelp_sm40/helpdata/EN/b7/07e4cf1a364a0482e29122c329b7d3/frameset.htm
For more information, see the SAP Service Marketplace at the following Internet address:
service.sap.com/earlywatch
Regards,
S.Manu. -
Query Regarding Early Watch Report
Hi All,
I have certain queries regarding the Early Watch Report.
Our platform in Oracle 10g and OS is HP-UX.Please sombody help me with the following.
1.What is Early Watch report and why we use it?
2.How to configure Early watch report from Solution Manager for DEV and QUA and PRO server?
3.If we dont configure will SAP take it from the system by logging in to client 066(correct me if I am wrong).
I have read SAP notes 20722,917558,12103,371023 but cant really make out how to configure it for our servers via Solution Manager.
PS:Helpful suggestions will be obliged and rewarded.
Regards,
AshutoshHi Ashutosh,
Please check below answers for your queries:
1.What is Early Watch report and why we use it?
The SAP EarlyWatch Alert is a diagnosis service, for the solution monitoring of SAP and non-SAP systems in the SAP Solution ManagerThis process identifies potential problems early, avoids bottlenecks and monitors the performance of your systems. SAP EarlyWatch Alert monitors your most important business processes and systems.
2.How to configure Early watch report from Solution Manager for DEV and QUA and PRO server?
Prerequisites to configure the Early Watch Report:
You have:
· set up RFC connections between your satellite systems and the SAP Solution Manager system, and an RFC connection between the SAP Solution Manager and the SAP Service Marketplace.
· checked the availability of the required tools for the SAP service session (ST-A, ST-PI add-on), with the report RTCCTOOL.
· assigned the Solution Monitoring roles to the users.
· set up the Automatic Session Manager (ASM) in the Service Data Control Center (transaction: SDCCN) for all SAP satellite systems and the central SAP Solution Manager of your solution (SAP note 91488).
· set up your systems in a solution landscape in the SAP Solution Manager.
Configuration steps:
1. You configure the SAP EarlyWatch Alert scheduling in the SAP Solution Manager.
You have:
¡ scheduled the service sessions for your solution, in the SAP Solution Manager Solution Directory
Procedure:
1. Choose the transaction SOLUTION_MANAGER.
2. Choose the Solution Landscape tab in the Operations Setup area.
3. Choose the Solution Settings link.
You go to the Solution Directory.
Alternatively, you can also select a solution from the Overview of active solutions and go to the Solution Directory.
4. Select your solution.
5. You can also enter contact person data in the Contact Person tab.
Proceed as follows:
i. Choose Add Contact Person.
ii. Enter the required data.
iii. Save your entries.
§ The contact data appears in the Solution Monitoring sessions, e.g. in Set-Up Business Process Monitoringsapurl_link_0001_0004_0005.
6. Specify the settings for your solution, in the Solution Settings tab:
Ex: Day of SAP EarlyWatch Alert data download
At the end save your entries.
3.If we dont configure will SAP take it from the system by logging in to client 066?
Yes, SAP uses this client when running the Early Watch Check.
Hope it clears your doubt.
Thanks
Kishore -
Hi All,
Can we generate Early Watch Report for TREX. How do we add TREX system through SMSY in Solution Manager?
ThanksDear Amit,
Unfortunately currently its not possible to intagrate the TREX system details to the EWA reporting. There are no TREX specific checks yet available.
Thanks,
Mark -
The Early Watch report is being send in mail but not in PDF.
Hi All,
We ahve recently configured CEN system which is configured for early watch report using mails but it is not being sent in pdf
it is being send in html.
Can some one pleas ehelp
Regards
YogeshHello Yogesh,
Earlywatch reports can only be generated in HTML and Word. Please take a look at below link for more details.
http://help.sap.com/saphelp_sm32/helpdata/en/87/50cce344ae495bae240add66a28ed7/content.htm
Thanks,
Siva Kumar -
Can I reschedule Early Watch Report's generation schedule?
Dear gurus,
There is a backgroud job running in our ECC PRD system. It gathered the performance data and sent it to SAP.
SAP will generate Early Watch Report for(EWA) me every week.
Now my question is: Can I reschedule the EWA generation period in ECC PRD via SDCCN? Because I want to get Early Watch Report that contains our PRD system's healthy status from 1st June to 30ty June (the whole week).
Can I? Hope you could give me some advice.
Thank you very much!
JasonHi Jason,
I guess you meant "the whole month" instead of "the whole week". Unfortunately the EarlyWatch Alert report is always weekly and cannot cover an entire month. But take a look at Service Level Reporting. An SLR can be weekly or monthly and contains much of the same data as the EWA. I think it will satisfy your requirements. A good starting point is here: http://help.sap.com/saphelp_smehp1/helpdata/en/36/5ec6267ba34de08c55e3c310ebdece/frameset.htm
Good luck!
Jon -
Hi Experts,
What is early watch report? Who creates it and what is its purpose?
Thanks.
SMHi,
are you using Solution Manager to monitor your landscape??
Early watch report used for to analyze detailed information about system status, performance, configuration, system operation, database administration details.
google it..you get more info.
Regards,
Raj -
How to create cross tab reports using RAS SDK api with Crystal Reports XI
Hi Everybody,
Iam generating reports in a web-based application with Crystal Reports XI using Report Application Server(RAS) SDK API. The columns in my report exceed that of an A4 sized page. So, when I export that report to pdf, only those columns that fit to a page are showing up. To solve, this problem, I thought of using cross tab. But, I donot know how to generate cross tab report using RAS SDK API. I have tried to get some code from the internet. But, I did not find any java code for that.Can some one give me some sample code.It is very urgent.
Thanks in advance.Hi,
The easiest way I use is to create the worksheet as regular table and then when i verify the data I get (non aggregate) I duplicate it as a cross tab.
In the duplication wizard I just need to define the axis (using drag and drop).
if you want to create a cross tab from the beginning you need to define that in the new workbook wizard (check the "cross tab" rather then "table"), chose your fields and define the place you want them.
The data point (the center of the cross tab) is aggregated as to your machine definition and will happen automatically.
for example: to find the amount of receipt by months:
On the left put the "Buyer Name", on top put the "Months" and in the data point put the amount.
What you'll get is something like:
months: jan feb mar apr ......
buyer_name
jhon_smith 100 50 30 250 ......
jhon_doe 80 45 90 453 ........
and so on..... -
RFC configuration for system monitoring / Early Watch reports
Hello Basis Gurus:
Please help me out.....
The early watch reports in the solution manager of my system are failing consistently to execute.This is happening for all the 3 systems DEV,QAS,PRD.when i click on individual earlywatch reports it takes me to a screen which says "data for this report is overdue.....go to your satellite system SDCCN to see why the data was not sent...."
It says ...check the following things.....
"The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data."
I can see the task processor job , and the periodic Maintenance package scheduled everyday and completed sucessfully.So is it the RFC which is causing the problem.
Im SM59 of the solman, i can see system generated RFCs for the PRD,DEV,QAS and SND (...3 for each of these systems...).
say for PRD, these are the 3 RFCs.
1.)SM_PRDCLNT<client#>_READ.
2.)SM_PRDCLNT<client#>_TMW.
3.)SM_PRDCLNT<client#>_TRUSTED.
I am not sure which RFCs among the 3 for any given system does the solman use to communicate to the satellite systems.
*The user id section in the Logon Data of any of these RFCs is blank.and the password says "is initial"...*is this correct.Does the user id have to be a communication type of user...
PLeaase advise as to what could be going wrong..
Regards.Hi,
The system uses ABAP Connection (Connection Type 3) to connect to different Systems to execute Functional Calls.
Now in your case, there are 3 different connections meaning your Basis Team has used 3 connections for different connection activities. This is totally a business dependent scenario.
Now each time you create a RFC Connection, the system will need the following information to remotely call another system, they are:
Host Details of Target System
Logon Details to remotely login
For RFC Connections the User Type has to be Communications User. But there are companies which use Dialog User Types as well to remotely login for some cases. When the User ID is created for an RFC User and a Password is assigned to it, this Password is considered as the Initial Password by the system. This Password is taken as the Initial Password in the RFC Connection as well.
There can be cases where the system is Trusted and there is no need of a password, but an Username is mandatory in all cases. Remember if you set the system as Trusted, the password option gets deactivated and the connection wont work, if the system does not have the Trusted status.
But in any case you must assign the Username alongwith the Client and Language Details in the RFC Connection for it to work.
Hope this helps.
/Manoj -
BW Early watch report ( SBIW )
Hi All,
We have received the early watch report for BW and in that It has mentioned to do SBIW ( IMG ) activity as follows:
Upload customizing BW (SBIW)
One part of table ROIDOCPRMS in every SAP source system controls the data transfer from the source systems
to this system. Table ROIDOCPRMS contains the following information:
maxsize - Maximum size of an IDoc packet in KB
statfrqu - The number of packets that are transferred before statistical information is sent
maxlines - Maximum number of records sent in one IDoc packet
maxprocs - Maximum number of dialog work processes for each upload request used to send the data to the
system
The correct setup of this table is important for performance and stability of the upload process. We checked the
setup of this table for all source systems connected to this system.
SAP asks to change the entries and it has given recommendations. I hope this will increase the rate of Data Transfer from ERP to BW.
My Questions :
01. My question is they have mentioned to set this in the respective Source System. i.e. Should I set it in the Production System.
02. one more thing. It is also required to create a transport request to do the above operation. for that case, should I create a Transport Request in the Production System. ? Is that generally ok ? how it is handled usually ??
03. To execute SBIW Transaction, what authorization is required ? and how to check which authorization is required to execute SBIW ??
Please throw me some light on this.
Thanking you in Anticipation.
Thanks & Regards
L Raghunahth
PS : If you know answer to any particular one also, please feel free to answer.Hi Raghunahth,
Please see my answers below.
01. My question is they have mentioned to set this in the respective Source System. i.e. Should I set it in the Production System.
These settings are related to the respective source sytem. Yes these settings are to be done on production system
02. one more thing. It is also required to create a transport request to do the above operation. for that case, should I create a Transport Request in the Production System. ? Is that generally ok ? how it is handled usually ??
No transport request required. Check with your basis guy to carryout these settings.
03. To execute SBIW Transaction, what authorization is required ? and how to check which authorization is required to execute SBIW ??
Ask the basis guy to give acces rights to tcode SBIW on the source system.
Hope this helps.
Regards,
Sreenivas. -
Hi all Experts,
Early watch report from SAP has suggested to delete data from BW statics table but has not specified any frequency of deleting data like 15 days, 30 days.
at present we have Number of entries in table RSDDSTAT_OLAP is 1095081 and Number of entries in RSDDSTAT_DM is 151687.
so my questions is that how to delete these data from table.
There is a program RSDDSTAT_DATA_DELETE which can be sheduled in background to delete data from these tables.
but I am not sure how many months of data should be stored in these tables, and if I delete data from these table how it will affect the delta loads for BW statistics cube.
there is one program which can automatically delete data from these tables
Use the report se38-->SAP_RSADMIN_MAINTAIN to set the parameter
object = TCT_KEEP_OLAP_DM_DATA_N_DAYS
Value = 14 (Default ..)
Please advice which option should I use.
I am in BI7 versionHI
I scheduled Program to delete data which is older than 30 days.
now my problem is solved -
Configure Early Watch Reports in SolMan
Hi Gurus,
Can you please help me out in the steps of configuring SolMan for Early Watch Reports.
Thanks in Advance,
Sachin Kumar.Hello Sachin,
Please implement/apply latest ST-PI and ST-API patches in your Dev system.
after applying the patches please execute RTCCTOOL program in Se38 t code.
This program helps in service preperation so that data from your satellite system(Dev) can be sent to
solution manager system.
once you are done with that we can configure Dev system in solution manager system and activate SDCCN.
SDCCN will help in collecting data from dev to Solman.
Please apply ST-PI and ST-API from SAINT transaction if it has never applied into your system.
You can add dev qa and prd system in Solution manager system
Use SMSY t code and add the systems(use add system with assistant option).
this will help you to create the RFC's also which are responsible for cummunicating from Solution manager to Satellite and vice versa.
after that make sure you execute the abap program RTCCTOOL and implement the missing notes thru that only which the report suggests.
let me know if you face any issues for the above steps ...
Cheers,Amber S
Maybe you are looking for
-
Keyboard / trackpad forces me to cold reboot
It seems to be happening now that every now and then the keyboard and/or trackpad will stop working either entirely or partially. The power button is never affected by this and the software seems to continue to run normally. Either way it always requ
-
Audigy SE and AL ADA885 problem needs to be solved once and for
I just purchased the Audigy SE (I'm on a budget) and installed it. I have the Altec Lansing ADA885 THX 4. digital surround speakers. This sound card DOES NOT work correctly with them. I have been all over the net trying everything that I have seen su
-
Multiple authors in ibooks author
The book I am writing has one primary author and three other major contributors. The book is at the stage where a good draft has been written by the primary author. I want to make this draft available to the other major contributors for them to rea
-
Living in Taiwan but want to download an English version of Lightroom, is it possible?
I am a Canadian expat living in Taiwan, and I would like to purchase an English version of Lightroom. I tried doing this when downloading Microsoft Word, and all I could get was the Chinese version. Does anyone know if there are language options wh
-
How to get best quality when exporting presentation to dvd?
I have just completed a keynote presentation with 21 slides including various movie clips. I want to export this to Dvd where it can be played on someone elses computer and then onto a projector. I have tried exporting it as a Quick time movie and th