How to generate profile create in SU02

Hi expert,
I had just create a profile in SU02 and i already activate it.
But still not been generate and there was no black button under Ty. column in SU02.
Is there other tcode to generate profile?
Please advice and my sap system is ver 4.0B.
Thanks
regards,
ng chong chuan

Chong,
As Alex mentioned - when you are creating profiles manually there is no generation of profiles involved.
When you are in SU02 and enter the profile name and press enter you come to a screen that says "Profile List", there you click on the create icon (F6) and then when you add objects in the next screen "Maintain Profile", you first need to activate the profiles in this screen and then use F3 to come back to screen 1"(Profile List) and activate again........

Similar Messages

How to find which profiles created with SU02 have a specific company code

We just added another company code.
We have company code 10 & 20
We're trying to find out which profiles created with SU02 have company code 0010 or * for BUKRS
I know that you can get that information with SUIM for field text BUKRS and it will show you all the roles or I can browse table agr_1252,
But how do I get the same information for profiles created with SU02
I just want to make sure that users that have company code 0010 cannot access company code 0020 and vice versa
Thanks a lot in advance, this will be very helpful for me
Thanks again
Joe

Hello Joe,
Solution is to be found in SUIM->Profiles by complex selection criteria. In the selectin screen uncheck the field 'Generated Profiles'
(t-code=S_BCE_68001409)
Total Questions: 58 (34 unresolved)
Please clean up your threads....
Thread locked as per forum rules.
b.rgds, Bernhard

Profiles created with SU02 and transporting them

We have a lot of profiles that were created with SU02.
When I change them in our Development system and then create a transport and move the transport to our quality system and our production system the changes do not get updated.
I manually go to each system with SU02 and make the changes again and activate them.
Is there another way or am I missing something.
Thanks
Joe

Julius,
The TCD field isn't causing confusion. Look to the left at that Z:MC40 or whatever. That's the auth object, which has a field called TCD. In other words, there isn't S_TCODE with field TCD, there's this Z:MC40 or whatever, with field TCD and the tcode in that filed is MC40 or whatever.
Anyway, if I go through my data for S_TCODE, then I find that in the profile, it refers to the following. Note that these are the only two profiles in my UST10S table that refers to S_TCODE. I need to figure out how to reconstruct the rest of the profiles into roles so that the unlimited access in these profiles below can be removed and the balance of the profiles can be given relevant transactions.
X:TCODE        S_TCODE     &_SAP_ALL
X:TCODE             S_TCODE     S_TCD_ALL
X:TCODE             S_TCODE     S_TCD_ANW
X:TCODE             S_TCODE     S_TCD_BC
X:TCODE             S_TCODE     S_TCD_CUST
X:TCODE:ALL     S_TCODE     &_SAP_ALL
X:TCODE:ALL     S_TCODE     S_TCD_ALL
X:TCODE:ALL     S_TCODE     S_TCD_ANW
X:TCODE:ALL     S_TCODE     S_TCD_BC
X:TCODE:ALL     S_TCODE     S_TCD_CUST
Edited by: Santosh Krishnan on Jun 30, 2010 1:23 PM
Edited by: Santosh Krishnan on Jun 30, 2010 1:24 PM

How to generate profile like report in APEX

Hi,
I am trying to create a report similar to Image: !http://www.nomagic.ie/sample_report.jpg! . I thought this will be easy if I create a form and fetch rows for reach section seperately during page rendering. Each each is coming from different table . I am okay with this approach, However there are couple sections that have multiple rows . I am wondering, If there is any better way in APEX to generate profile like report.
Thanks
Aali

Hi Aali
You could do this using reports rather than forms and you'd just need to have two columns returned by each query and change the alignment to mimic that look.
Then just create a custom report template that looks the same as that (removing all borders etc).
>
I am okay with this approach, However there are couple sections that have multiple rows
>
I don't understand what you mean by this?
Cheers
Ben

How to generate profile which has been copied from standard SAP profile

Hi gurus,
   I have to assign some profiles to users.So I copied them through SU02.
I saved those profiles and activated also. But I unable to generate them.
Plz advise me
Thanx

Hi,
Try with the following Tcodes related to authorizations,uses,etc,,
SUUM          Global User Manager
SUUMD        Display User Administration
SU01           User Maintenance
SU01D        User Display
SU02          Maintain Authorization Profiles
SU03          Maintain Authorizations
SU05          Maintain Internet Users
SU10         User Mass Maintenance
SU20          Maintain Authorization Fields
SU21          Maintain Authorization Objects
SU22          Auth. Object Usage in Transactions
SU24          Auth. Obj. Check Under Transactions
SU25          Upgrade Tool for Profile Generator
SU26          Upgrade Tool for Profile Generator
SU3          Maintain Users Own Data
SU53         Evaluate Authorization Check
SU56         Analyze User Buffer
SU84         Read Archived User Change Documents
SU85         Read Archived Password Change Doc.
SU86         Read Profile Change Documents
SU87         Read Authorization Change Documents
Regards
Arani Bhaskar

How to generate profile batchly?

Hi Experts,
Is there any way to generate roles' profile batchly?
THanks a lot!
shaoming

You can use program "sapprofc_new" - e.g. with the "auto" variant or build your own selection variant, or use transaction SUPC - it call the same program....
On the other hand, I am not sure what you'd like to acheive. Normally, one would like to ensure User Profiles are Compared - not rebuilt - using report PFCG_TIME_DEPENDECY. Not sure why you would like an automatic role rebuild... especially in a PRD environment.
Please note that usually - I believe this is an option when you install the system - all recent SAP installation (4.6C from a certain patch level, defo 4.7 and above) do not actually require user comparison to be performed. You still can user compare, but it is not required. As stated before, this is an option that can be selected upon the first PFCG use.
HTH,
Stefan
Edited by: sbarsanescu on Nov 13, 2009 8:27 AM

How to generate a create tablespace ddl?

Hi guys
I would like to know where in Designer I can generate a ddl for JUST tablespaces. It looks like every time I try to generate it from the DbAdmin tab I get
this " CDS-11312 Warning: Tablespace 'MYTABLESPACE_DATA' property COMPLETE is 'N' " warning.
Can anybody help on this
Thanks
-A

I go it. You need to set your property pallet "complete" attribute to yes (F4)
Thanks

How to find all generated profiles (with more than one nomenclature)

Hello all,
I have an Solution Manager 4.0 system and I want to find out:
a. all sap profiles created via SU02 (not generated profiles)
b. all generated profiles
b. all generated profiles with user assignment
Initially I extracted values from tables UST10C and UST10S for single and comp. profile information. For profile assignment, I searched UST04. But then I realized that generated profiles don't follow a standard nomenclature. Some start with T-54, some with T-56, then T-AA, T-MW [now there some T_MW profiles created via SU02 ]
Can anyone help me here please?
Thanks and regards,
Sundar.

Hi Sundar,
please check table USR10.
The interesting field for you is USR10-Typ.
Field value meanings:
C    Composite Profile
G    Generated Profile
S    Single profile
b.rgds, Bernhard

No. of Generated Profile

Hi all,
Let me know how many generated profile does a role can have?
Because i have created a role & generated one profile (For eg: Ztest1_). After then i have inserted some profiles directly into that role. At that time the system automatially generates some new profiles (Ztest1_1, Ztest_2). On what basis the system generates these profiles.
Regards Uma

Der Name einer [email protected] Adresse kann nicht geändert werden. Wenn du dich bei www.icloud.com mit dieser falsch angelegten Adresse=Apple-ID einloggst, kannst du eine Alias-Adresse mit dem gewünschten Namen anlegen.
Lies lieber das hier, um zu wissen, welche ID man wo eingeben muss (auf Deutsch): http://support.apple.com/kb/HT4895?viewlocale=de_DE

How to configure wokflow for MRP generated & manually created PR

Dear Gurus,
I have to customize SAP workflow for releasing Purchase requisitions. I will be using enhancement M06B0001 for my own role resolution.
I have some questions regarding workflow
1) How to configure workflow for MRP generated & manually created PR?What are the steps? what are the limitations in doing so?
2) Since we are facing the problem of insufficient user license ,How to send notifications to NON SAP users?(We have thought of creating a Z table for the same)
Looking forward to your reply,
Thanks in advance,
Best regards
Tushar
SAP MM Consultant

Dear Mike,
Thanks for your reply, & sorry for not responding on time.
Here are my constraints:
1) Not a single component of HR module will be implemented.(Project management decision:-()
2) Number of user licenses are less, considering the workflow users.(Hence we have thought of creating Z table for employee nos. & EMAIL IDs ,& this table will be accessed by using M06B0001 user exit.(It is still in development phase. Truely speaking, dont know whether it will work or not).If this works out ,then I believe, record from SU01 will not be used (Please correct me here).
3)We have 2 instances on development server.(in short,2 separate installations on same server by creating additional instance). What are the implications of this particular system landscape on workflow? Whether workflow will work or not??:-(, :-(.
The reason I asked you 3rd question is , As soon as 2 nd instance was created on development server, Short Dumps are coming while running transactions of Workflow builder.(SWDD & PFTC).It is giving error" Table is unknown or does not exist". Description of error says"The current program"SAPLSWF3 had to be terminated because one of the statements could not be executed."
"An SAP Open SQL Statement contains a table that does not exist in the database or is not listed in the ABAP Data dictionary.The Table is "SWF_WFPDSC" or another table is accessed in the statement.
Program=SAPLSWF3
Include=LSWF3U05
Row=22
Module name=SWF_WFP_REPOSITORY_CONTENT_GET
The same dump is coming while accessing SWF_WFPVW table from SE16.
Request to Mike & all of you, help me in this regard.
Thanks in Advance,
Regards,
Tushar

How to generate an id for a vendor when create a new one?

Dear friends,
How to generate a new id for a new vendor when create the new vendor?
Thanks a lot!

>
Qiwei Yin wrote:
> Dear friends,
>
> How to generate a new id for a new vendor when create the new vendor?
>
> Thanks a lot!
Hi,
For many account groups, there is no need to specify vendor number while creating a new vendor. They will take internal number assignment and you can leave this field blank.
For external number assignment, you can assign you own number.
If you are creating vendors through program, and you want your vendors in a particular format, you can use your own number ranges created through SNRO.
regards
Sreenivas

How to be sure VueScan generated profiles are being used

I recently reprofiled everything. I know that the monitor profile is selected in Displays, and I am satisfied that it is being used correctly. I see the printer profile in (HD)/Library/ColorSync/Profiles, and I see the scanner profile in Users/usr/ColorSync/Profiles.
I am only certain that VueScan itself will use these. When I use the Safari File>Print dialog windows, I don't see any indication that it knows about the printer icc in the Color Matching window. Same with the Preview File> Print dialog Color Matching windows. The generated monitor profile is in there for some strange reason, though.
In Photoshop CS5 Print , the PS Manages Colors window does not show the new profile.
In Epson Scan/ColorSync there is no new scanner profile identified by its actual name.
I haven't looked in Elements 10, why bother?
I have the VueScan Bible by Steinhoff, which provides a completely uninformative guide to profiling. The website shown in his book jacket is in German with no English version, and I don't see any link for questions anyway.
Hamrick gets irritable when you ask him anything that questions his software. He never answered the last time.
I am going to presume that only VueScan will call the generated profiles. You set the paths in VueScan, so I suppose that means that only VueScan will see them. I guess this means that you have to buy one of the profiling apps to make system wide profiles.

Lundberg02 wrote:
…I see the printer profile in (HD)/Library/ColorSync/Profiles…
Lundberg02,
That's where—in my opinion and experience—all profiles belong. Try putting your scanner-generated profiles there.
Also, don't forget that all color profiles have two names: an external and an internal name, so that the profile may not be in the alphabetical-order location you expect it to. You can use the ColorSync utility to look at the guts of the profile: it will show you both internal and external names.
Off topic: You mean to tell us that you've managed to irritate Ed Hamrick of all people? ??? !!
Oy!

How to Generate commercial Invoice and Shippers letter of instructions?

Hi,
Could you please tell me how to generate the Commercial Invoice and Shippers Letter of instructions in GTS? What should be done after generating a proforma invoice (F8)??
Please walk me through with the settings that are required for generating and printing a commercial invoice.
Thanks,
Shruthi

Hi Shruthi,
One you have created F8 it has to be pushed to GTS this F8 doc create custom Shipment document in GTS on this document you have to configure a mesage type determiantion which will print Commercial Invoice.
Thorugh Communication Process setting ( PPF) ( SPRO Customs Mgmt --->Comm Process )
Detail step :
Define Tech Med for Msgs ( PPF) for Custom Shipment and Decalration ( If any messages required)
2.Define Condition and Output Parameters for Comm Of Cust ship & Decl.
3.Define Messages For Comm Process.
4. Define Control Settings of Communication Process
Process Templates, Process, Activities,Messages,Activity Seq,Subsequent Activity ,
5.Determination Of Activity Sequence.
6.Classify Foreign Trade Document.( For messages)
7.Define Standard Text and Logo For Printing Document ( If reqd for mesages)
8.Print Control For Foreign Document .
Set the parameter defined under in GTS Main Menu *"(Customs Processing Import Export/Message Parameters) Message Determination *"
Action profile you have choosen to define your action def has to be assigend to
custom doc type CULOEX or which ever you are using
SAP native /SAPSLL/PF_US_COM_IN Pdf form is available for CI you can create custom if you need more fileds on it.
Kind Regards,
Sameer

How to generate an OUTBOUND INVOICE IDOC from the ABAP Program?

How to generate an OUTBOUND INVOICE IDOC from the ABAP Program? Any Function Module that can be used for this?

Hi
This is more of configuration
(1) Create a Output type with Medium 6 ( Check with your functional consultant)
(2) Maintain Partner Profiles using WE20 transaction
       Idoc type - INVOIC02
       Message type - INVOIC
       Process Code - SD09
Regards
Madhan D

Generating profiles using ODSs

Hi,
When generating profiles using ODSs - one for the hierarchy and one for the value. What purpose do these 2 ODS do? Why is one for the Hierarchy and the one is for value?
Thanks
Will

Hi Soumya,
I am following the "how to generate BW authorization profiles from a flat file". Instead of using a flat file, I have created a table to read the values and fill the ODSs with the data by providing and mapping the fields for the ODSs.
Would you happen to know what I should mapped these InfoObjects to:
0TCTIOBJNM
0TCTNIOBJNM for this one I am mapping it to 0HIER_NODE for text node
0TCTNODE
I am getting an error though:
<i>Warning no authority for the node from characteristic 0sales_grp, hier ztest
Warning your user master record is not sufficient maintained for object ZATH</i>
I no longer use object ZATH but it is giving me an error.
Would you happen to know what it is saying?
Thanks

How to generate profile create in SU02

Similar Messages

Maybe you are looking for