How to generate specific traffic types for testing?

Hi all.
Is there a good tool or tools (Windows-based) for generating and testing traffic through specific ports to a remote host?  I know what I am asking for but not sure how to put it into the right words, so here' s an example.  Normally in a situation where if I set up a router with some NAT and a zone firewall, and want to test whether the outside world can get to a web server internally, I would attach a real web server to the inside interface, set up the rules and policies to reach it, and then test from a laptop or PC attached in some way to the outside (Internet) inteface. 
But I don't always have a web server to plug in, and this says nothing about other protocols I'd want to test.  For example ntp protocol on udp 123. 
So ideally I would take two laptops and install the testing tool on each, plug one into the LAN and the other to the outside thus simuluating some random Internet host, and then they can talk to each other over any port or protocol they allow for and show the results. 
Not sure why I can't seem to articulate this very well today but I hope I'm getting the idea across.  I'm not looking for a port scanner or something but rather a tool for testing end-to-end success of communication between two systems over an intermediiary device (router), over certain ports or protocols. 
Thank you!

I looked over quite a few in there, would still need to download and test.  Seems there are a lot of home grown tools by university engineers out there
Unfortunately iperf isn't Windows-based which is what I need for this scenario but it does look very intreesting in itself.
I did find that nmap has nping which employs an echo responder so hopefully it can do more than just icmp.  Nonetheless that whole list has very interesting tools which I'll review in more detail when time permits.
Thank you! 

Similar Messages

  • How to generate 2 TB database for testing purpose

    Hi All,
    I need to generate 2 TB of database. This is for test purpose, so please provide me with any information that could achieve this in simple steps.
    If you could provide script that will be the best. I have 10.2.0.4 database on HPUX 11.31 PA-RISC server.
    Regards,
    MS

    user13414195 wrote:
    I need to generate 2 TB of database. This is for test purpose, so please provide me with any information that could achieve this in simple steps. Scripts for what exactly? Single table? Multiple tables? Generate raw (meaningless) row data? Generate data for tables that include foreign key constraints and so on? Data for selecting via full table scans or index scans? Or is this simply to test row inserts? What about update and deletes?
    You need to be a lot more specific about what you mean with testing purposes.
    I have 10.2.0.4 database on HPUX 11.31 PA-RISC server.Note that premiere support for 10.2 has been terminated in July 2010 - whereas it only terminates in January 2015 for 11.2. So it makes a lot more sense to be on a newer version of Oracle.

  • How to setup a routing rule for a specific file type for the content organizer?

    Hello,
    how can I set a routing rule for a specific file type, for example for "pdf" or for "docx", for my content organizer?
    As standard I can only choose for the rules the content type, name and title of the file uploaded.
    Thank you in advance!
    JohnyG

    Hi Johny,
    Based on your description, my understanding is that you want to create a routing rule for a specific file type.
    I recommend to create rules with the conditions as the image below shows for the Document content type(for example: .docx files):
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Ugent: How to restrict a Material Type for a Specific Process Order Type

    Hi All
    Can any one please tell me how to restrict material type for specific process order type
    We have Process Order type ZPBS for finished materials but while creating process order
    if i give the material of semi finished material type the system let me create the process order
    it should not as we have a separate process order type for semi finished materials that is ZPBS.
    And vice versa
    Please help me how to restrict these material types for specific Process Order Types.
    Points ll be awarded accordingly
    Bilal Athar

    Hy Ghulam Mohammad,
    Good Morning,
    Pls go through below link
    [http://www.sap-img.com/abap/what-is-user-exits.htm]
    [http://www.sap-basis-abap.com/sapab013.htm]
    Now regarding How to place your checks in User Exit, then pls explain your requirements to your Abaper , so that he or she can write it into programeble language.
    Regards,
    Dhaval

  • How to generate web traffic report on SharePoint 2013?

    Hello All,
    I am working on Intranet in SharePoint 2013 On Premise.
    There are functionalities like Poll, Survey, Event, Announcements etc.
    Now there is a requirement to create web traffic report for all these functionality. How should I generate web traffic report for all these?
    Thanks in Advance.

    Hi Darsh,
    Here is the out of box analytic reports you can view.  Please refer to the following article.
    SharePoint 2013 Analytics A Big Step Backward
    New Analytics in SharePoint 2013
    Please mark it answered, if your problem resolved or helpful. 

  • How to generate an XML file for an animation of IK armature

    Can someone please tell me how to generate an XML file for an animation of IK armature.
    I have a 5 keyframe/16 frame animation of a human character made up of a series of moveiclip symbols that is animated with an IK armature.  I need the XML information from the animation. 
    When I go to Commands > Export Motion XML I get the error message "There is more than one object on frame 1" and then nothing happens.
    Thank you,
    c

    I hope that's not the case.  I want to write to adobe about it.  I think it's a great feature and it functions really well even though it is not a very developed IK tool.  My biggest issue with it is ouput options and integration with motion tweens.
    I have seen a lot of examples of animators using it online, just no one talked about output.  I just feel it hasn't been developed.  It can generate a sprite sheet but only for a single pose frame of the animation, and not all the key frames or pose tweens.  I find that functionality quite odd, as if adobe just forgot about IK when added in sprite sheets, etc. and the reason it half works is just an accident.

  • How To Generate Debug Log Files for ebs jsp?

    hi   How To Generate Debug Log Files for ebs r12 jsp?
    and where i get the log .please help me thanks!

    Please check following MOS Document
    Oracle Application Server Diagnostic Tools and Log Files in Applications Release 12 (Doc ID 454178.1)

  • How to add a document type for the residence status GB in infotype 48

    Hi Team,
    How to add a document type for the residence status GB in infotype 48.
    Please answer this  at the earliest.PFA screnshot.
    Thanks
    chris

    I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
    In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
    A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
    When a relationship is created you may watch it also from either end (again INFO is the starting point).
    It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

  • How do I enter Document Type for Purchase requisition IDOC

    Hello,
    File - IDOC (PREQCR.PREQCR02)
    The file is getting picked up and shows up a checkered flag in Moni..
    but in WE05, on R3 side, i see an error message
    "Enter Document Type"
    How do I enter document type for Purchase requisition IDOC?
    will that solve this issue?
    thanks and regards
    Nikhil.

    Hi,
    For error 51, you need to set the default document type in the inbound processing FM of the IDOC
    Standard type - NB
    Subcontrator type
    Blank PO
    Service PO
    Stock transport PO.
    Document types is used for below things,
    1. It controls the no. range of the document i.e. the doc no.
    2. It controls whether doc no. is auto assigned or manually entered
    3. It controls the field status of the doc header fields i.e. whether input is mandatory or optional
    4. It controls the physical doc filing
    Thanks
    Swarup

  • How to generate a  number sequence for a column of a Z*table?

    Hi ,
    How to generate a  number sequence for a column of a Z*table?
    plz guide me.
    thanks
    Albert

    1) Use SNRO for defining a number range.
    2) Use FM NUMBER_GET_NEXT for getting the next number with object, sub object etc..
    See one example below.
          CALL FUNCTION 'NUMBER_GET_NEXT'
            EXPORTING
              nr_range_nr                   = c_01
              object                        = c_z_prd_code
    *           QUANTITY                      = '1'
             subobject                     = p_vkorg
    *           TOYEAR                        = '0000'
    *           IGNORE_BUFFER                 = ' '
           IMPORTING
             number                        = in_prd_code
    *           QUANTITY                      =
    *           RETURNCODE                    =
            EXCEPTIONS
                  interval_not_found            = 1
                  number_range_not_intern       = 2
                  object_not_found              = 3
                  quantity_is_0                 = 4
                  quantity_is_not_1             = 5
                  interval_overflow             = 6
                  buffer_overflow               = 7
                  OTHERS                        = 8
    3) You may write these code in main program of the table maintinence
    rgds,
    TM.

  • How to know the output type for particular tcode

    Hi
    how to know the output type for the VL10D & VAL TCODES.
    Can anybody help me out.
    Thanks and Regards
    Krishnarao

    Hi Krishna,
    GO to NACE and select your application and click on output types and in the next screen select your output type and and dbl click on Processing routines.
    Here you will come to know about which driver program is used for which smartform or Script.
    and for Program details you can refer table: REPOSRC
    Regards,
    Sachin

  • How to change exchange rate type for specific pricing condition type

    Hello every one,
    I have a requirement for billing ie VF01.
    currently  all the exchange rate are being calculated with exchange rate type 'M' by default.
    but now client want it should calculate exchange rate with type 'E' for two pricing condition type for all others it should calculate with type 'M'
    Please any body can help me with the exit and code which i can use.
    I have checked exits SDVFX008.
    but how to change exchange rate with type 'E' only for two conditions.
    as changing exchange rate at document header will change exchange rate for all condition type.

    You need to assign KOMK-KURST = 'E', for those two condition types. If it had been item number specific, you could have used USEREXIT_PRICING_PREPARE_TKOMK(RV60AFZZ).
    Do one thing, put a breakpoint on FM 'PRICING' and then do selective runtime analysis.
    Check whether any user exit/BADI/ explicit enhancement are available when condition types are processed in a loop. If nothing is available, try implicit enhancement.
    Link to refer for selective runtime analysis - Runtime Analysis for VOFM
    Also try with VOFM requirements ( not sure whether changing KOMK-KURST is permissable in requirement as normally  we only set sy-subrc values to suppress/allow condition types ). Don't forget to assign requirements against condition types in pricing procedure.

  • How I restrict Scheduling agreement type for specific Purchase organization.

    Hello Experts,
    I have created Scheduling agreement type (ZLT). I want to restrict this agreement type for specific purchasing organization.
    I have search many threads but I didn't get solution.
    Is it possible through Configuration or user exit.
    Kindly give me solution in details.
    Thanks,
    Ranjit Kumar.

    hi,
    I don't think that there is standard configuration to restrict Purchasing document type for purchasing group. you can restrict this trough user authorization or you can make user exit development.
    Regards,
    mukesh

  • How to generate WS and WSDL for proper working DS under ALDSP 3.0?

    Hi,
    Ive got small problem with generating WebService and WSDL for proper working DataService in AL Data Service Studio.
    Whats the worse, I cant find any good documentation showing how to do it step by step in the new development enviroment.
    Currently Im doing it like:
    1) right click on DS and then Create Web Service Map
    2) when Im trying to View WSDL for created (in previous point) WS Map, after a while for deployment, I get Error 404--Not Found
    3) when Im trying to Save WSDL As ... , after showing where it should to be saved, nothing happens
    4) At Test Web Service Map option Ive got (in ZIP archive there is error trace from WebLogic console):
    http://localhost:7001/xyz/abc/test/something.ws?WSDL
    failed due to weblogic.testclient.WsdlParseFailedException: Not Found
    My questions are:
    i) how I can generate WS for DS?
    ii) when there will be some tutorials to download for ALDSP 3.0?

    Some new facts about this situation.
    A moment ago Ive made all the things like in edocs:
    http://edocs.bea.com/aldsp/docs30/install/migration.html#wp1081343
    After that problems still exists and what is the worst - the same problem as at the first time.
    So:
    1) Problem of not migrated kind="private" to visibility="private"
    2) Problem of migrating the files encoded in CP1250 if they got charakters encoded in CP1250
    3) I know that proces of migration from multiple imports to the same namespace within XSDs must be done in manual way but problem still exist
    4) There are some issue like this:
    "[ld:xXx_PIDataServices/cache/order/order.ds]: The return type of the read function "{ld:xXx_PIDataServices/cache/order/order}setOrderStatus" with arity 1 does not match the Data Service target (element) type "{services.cache.integration.amg}setOrderOut"."
    When I remove kind="read" from pragma then its going to be valid.
    In short time we will try to contact with our local BEA support.
    PS Right now I was trying to import another project (sample one for Workshop 8.1 - <BEA_HOME>\weblogic81\samples\workshop\SamplesApp) and it also didnt go smoothly :/
    Edited by PiotrGalas at 02/01/2008 4:20 AM

  • How to generate tags in Auto ID Test Tool

    Hi SDNers,
    I want to use auto id test tool (ain/test_client).
    I want to create a tag & post this data to ECC through XI.
    I am not able to create a tag as I have not maintained any master data in AII.
    Can you please guide me on how to create a tag and the configurations & steps required to do it.
    Regards,
    Gautam Purohit

    The steps that you will require to generate tags using Auto ID test tool to send simulated event messages to backend ERP system in your landscape are:
    1) Maintenance of RFC connection between the two systems (sm59)
    2) spro Auto ID infrastructure  Basic Settings ID Settings  Define ID versions
    You will need to set the default Id
    3) spro Auto ID infrastructure  Basic Settings  Device Communication Settings
    Activate the relevant services
    4) spro Auto ID infrastructure  Master Data
    In Product, you will need to define Product Hierarchy and Output format and Storage format of Product IDs. ( You will need to define this to define Product Master data)
    5) SAP Easy Access screen  Auto ID Infrastructure  Master Data  Devices
    You will need to define device controllers, device groups and devices.
    6) Similarly define Product and Location master data.
    7) Maintain the number ranges for the tag encoding type.
    Point to note: You can define master data as example master data for speed work. When you later configure system, put in the real master data.
    Get back to me on any clarifications.
    Note: All the configurations mentioned will be needed to use in the tag generation.
    Also please mention me the problem which you were facing with Auto ID test tool:
    "System cannot determine GRAI for tag encoding type GRAI-96" is solved or not?
    "This problem is solved"
    This was an authorization problem right?

Maybe you are looking for