How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?
Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.
Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.
Similar Messages
-
How to generate XML file in SAP
Hi,
I have a requirement where i have to genreate the XML file with tags in SAP using classes.
Then i will pass this XML data in IDOC segment in a string and then this will go to XI team.
there are many classes CLXML but i am not sure which class i have to use.
If someone has worked on it, then kindly tell me.
thanks,
Mamta
Moderator message: please search for available information/documentation before asking, a lot about XML can be found in SAP online documentation.
Edited by: Thomas Zloch on Oct 22, 2010 1:17 PMHi Kamen
There are various flavors how you can integrate SAP into SWIFTNet.
We have implemented such solutions for 40+ customes with various SAP blueprints:
- full blown SAP with ECC 6.0, PI/BCM incl. SIPS
- SAP ECC 6.0 with PI but no SIPS
- SAP ECC 6.0 with BCM but no PI and SIPS
- SAP ECC 6.0 direct integration
1) payment format templates (e. g. MT101 or XML PAIN.001 are available in Payment Medium Workbench (PMW) and can be modified with Data Definition Exchange Engine (DDEE) to the bank specific flavor.
2) mapping would be provided by us in the Service Bureau
The longer the more we see the trend, that a corporate only maintains one payment format in SAP and we then map it to to bank or country specific format and flavor. -
Generate XML file for payroll result
Hi,
I tried to generate XML file for chinese payroll result by t-code: pu12, but i can not find the interface format for china payroll(here is format for other country vesion like international, france...). How can i generate xml file for chinese payroll result. DO i need to create a format type? Is there any other way? thank you in advance.Coming back to my question is it really possible to generate bigger XML on 9i.
Sure. But not in one go.
I would use SQL/XML functions instead and paginate the result set so that each CLOB chunk doesn't exceed 4GB (or less). Each chunk could then be appended to a file using UTL_FILE.
Alternatively, as Oracle 9i supports parallel pipelined functions, you could also imagine doing the job in parallel using automatic data partitioning on an input ref cursor.
That would require some postprocessing steps to rebuild the entire file from the different chunks though.
See : Pipelined and Parallel Table Functions -
How to generate XML file based on XSD in SSIS
please provide step by step process to create xml based on XSD in SSIS
Hi hemasankar,
In SQL Server Integrated Services, we can generate XML Schema (XSD) file based on a XML file with XML Source Editor. If we want to generate XML file based on a XSD file, we can use Generate Sample XML feature in Visual Studio. For more details, please refer
to the following steps:
Click on "XML Schema Explorer" or 'Use the XML Schema Explorer...' to open XML Schema Explorer in Visual Studio.
If your Schema file is valid and you are having elements, right-click on element and click on "Generate Sample XML", this functionality generates XML file in temp folder and open ups in the XML Editor.
The following two document about how to generate XML file based on a XSD file are for your reference:
http://msdn.microsoft.com/en-us/library/dd489258.aspx
http://www.codeproject.com/Articles/400016/Generate-Sample-XML-from-XSD
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How to generate XSD file for XML schema adobe form
Hi,
I want to generate XSD file for XML schema interfaces adobe forms. How can I do it. Where I can do it..or who will provide this file..
Thanks
Ram
Edited by: Ramesh ram on Feb 23, 2010 6:33 PMAaaaah, my mistake, sorry for that. Of course you should use the XML interface and I forgot it is not described in this tutorial. You can easily find another one where the XML based interface is used. But... you won´t need any tutorial. just create a WD context. Place a Interactive form element on your WD app screen, in the attributes you need to maintain the form template name. If you write a name suitable for you which no existing forms uses, the system will offer you to generate a XML based interface and right after that it will "send" you to the SFP transaction. That means you can like skipi the step defining the interface because it it is generated automatically and you only draw the layout for this generated interface.
You should use XMl based interface for your WD app, because when using the ABAP dic based, some features are not available (I am not sure, but ABAP based works only for print form or something).
Hope it is all clear now,
have a nice day,
Otto -
How to generate XML file using select files manually option in MOPz
Hi Guru's!
Can someone tell me how can I generate XML file not using the calculate automatically option but using select files manually. thanks!Hi Maix,
You may manually add the files into download basket and then approve it.
Use the SCN document below for the steps.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10b14f0c-b9af-2e10-ba83-f05ebcfbc3c2?QuickLink=index&…
Hope this helps.
Regards,
Deepak Kori -
Do i required to generate XML file for JAVA upgrade.
Dear frnds,
I am in process of upgrading EP 6.0 to EP 7.0 EHP1 for SR1.
I am following document Upgrade Guide SAP NetWeaver 7.0 Java Including Enhancement Package 1
As of media list guide i have selected .
51036889_1/2 for UPG MASTER BS7 SR1
51037093_1,2,3 for NW 7.0 EHP1 SR1 java SW components 1/2
51036767_2 for BS7 UC kernel 7.01 AIX 64 bit.
Well, i have a query here when i am doing upgrade on ABAP stack ECC 5.0 to ECC 6.0 EHP4 SR1 i alowed to select required compoenets , which eventually will generate mea XML file in Solution manager system.
But, When i have planned to UPGRADE only JAVA Stack for EP 6.0 to EP 7.0 EHP1 SR1. When i selected my system in Solution manager i am not getting option for UPGRADE.
If it is so how about my XML file during JAVA upgrade is not mandatory or not .. Please advice me on this.
regards,
rahulHi Rahul,
Yes, for Java Upgrade to EHP1 you need xml file. Normally you should be able to download xml file from solution manager from MOPZ.
If you are not able to download it from solman then you can also download the xml file from service market place and this is only for EHP1. Follow below procedure to download xml file from SMP for EHP1:
Go to https://websmp205.sap-ag.de/sp-stacks
Click on SP Stack download.
Select SP Stack Netweaver 7.0 (New window will open)
Then on New Window Select Source Stack, Target Stack and usgae type. Then Click Next.
On Next screen Select Kernel and IGS. Then Go Next.
On that screen you will get a option to Save as File. Then save as xml.
This is the xml file that you can use in upgrade.
For EHP4 you cannot download it from service market place.
Thanks
Sunny -
How to generate XML file from SQL file !
I am new to XML publisher. I known one way to generate XML file is register one report file in concurrent manager.
But I want to generate XML file from sql file.
Could someone show me how to code in sql file, how to register is in concurrent manager.
Thanks !Hi
Phew ... not sure we have the space here. So I can point you in the right direction:
1. XML data generation - there are two packages in the db you can use with a plsql procedure, XMLGEN and SQL XML. You can also use java APIs too. Try checking the db documentation and search for the above methods.
2. Registering the report - the system administrators guide will provide this info. Hooking the program up with XMLP is covered here - http://www.oracle.com/technology/products/applications/publishing/resource/CM%20Whitepaper5.0.pdf
Regards, Tim -
How to generate Excle file for a report runningin a Batch job
Hello All,
Can we generate Excle file for a report running in a Batch job.
Kindly send reply to [email protected]
Thanks in Advance.
Cheers,
SundeepDear Sundeep,
I'm providing you with the following piece of code ... Its working fine for me ... hopefully it suits your requirement ...
D A T A D E C L A R A T I O N *
TYPES: BEGIN OF TY_EXCEL,
CELL_01(80) TYPE C,
CELL_02(80) TYPE C,
CELL_03(80) TYPE C,
CELL_04(80) TYPE C,
CELL_05(80) TYPE C,
CELL_06(80) TYPE C,
CELL_07(80) TYPE C,
CELL_08(80) TYPE C,
CELL_09(80) TYPE C,
CELL_10(80) TYPE C,
END OF TY_EXCEL.
DATA: IT_EXCEL TYPE STANDARD TABLE OF TY_EXCEL,
WA_EXCEL TYPE TY_EXCEL..
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Here you populate the Internal Table.
Display - Top of the Page.
PERFORM DISPLAY_TOP_OF_PAGE.
E V E N T : E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
SET PF-STATUS 'GUI_STATUS'.
E V E N T : A T U S E R - C O M M AN D *
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EXPORT'.
Exporting the report data to Excel.
PERFORM EXPORT_TO_EXCEL.
ENDCASE.
*& Form DISPLAY_TOP_OF_PAGE
text
--> p1 text
<-- p2 text
FORM DISPLAY_TOP_OF_PAGE .
SKIP.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'O R I C A'
CENTERED COLOR 1,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'Shift Asset Depreciation - Period/Year-wise Report.'
CENTERED COLOR 4 INTENSIFIED OFF,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE.
E X C E L O P E R A T I O N
CLEAR: IT_EXCEL[],
WA_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
WA_EXCEL-cell_02 = ' XYZ Ltd. '.
APPEND WA_EXCEL TO IT_EXCEL.
CLEAR: WA_EXCEL.
WA_EXCEL-cell_02 = 'Shift Asset Depreciation - Period/Year-wise Report.'.
APPEND WA_EXCEL TO IT_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
ENDFORM. " DISPLAY_TOP_OF_PAGE
*& Form APPEND_BLANK_LINE
text
-->P_1 text
FORM APPEND_BLANK_LINE USING P_LINE TYPE I.
DO P_LINE TIMES.
CLEAR: WA_EXCEL.
APPEND WA_EXCEL TO IT_EXCEL.
enddo.
ENDFORM.
*& Form EXPORT_TO_EXCEL
text
--> p1 text
<-- p2 text
FORM EXPORT_TO_EXCEL .
DATA: L_FILE_NAME(60) TYPE C.
Create a file name
CONCATENATE 'C:\' 'Shift_Depn_' SY-DATUM6(2) '.' SY-DATUM4(2)
'.' SY-DATUM+0(4) INTO L_FILE_NAME.
Pass the internal table (it_excel which is already populated )
to the function module for excel download.
CALL FUNCTION 'WS_EXCEL'
exporting
filename = L_FILE_NAME
tables
data = IT_EXCEL
exceptions
unknown_error = 1
others = 2.
if sy-subrc <> 0.
message e001(ymm) with 'Error in exporting to Excel.'.
endif.
ENDFORM. " EXPORT_TO_EXCEL
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When you click the button - Export to Excel ( GUI-Status) you'll be able to export the content of the Internal Table to an Excel file .......
Regards,
Abir
Don't forget to award points * -
How to generate XML file using EJB ?
Hi
Cab anyone point me towards some good examples which creates xml file for the data extracted using EJBs .I have rough idea that this could be done with DOM/JDOm but need some goos example .
Also I have J2EE RI server,Xalan/Xerces ....Do I need to download DOM/JDOM APIs separately...
I am relatively new to J2EE .
Thanks
Ashhttp://www.theserverside.com/home/index.jsp
J2EE and XML Development PDF
Dave -
How to Import XML file into SAP B1
Dear All,
I have a scenario like,
I am receiving a XML file from a 3rd party application for the daily Creation,Update of Item Master,BP Master, Marketing Documents. I want to import this file into SAP B1 through its approp objects. I understand DTW has limitation in its file types (Semicolo,Tab,Comma,ODBC). How do i do this ? Please guide me.
Thanks,
Thanga Raj KHy folks,
I´m frim Brasil and I've been studying the tool EFM (Eletronic File Manager) to learn more about it!
There I saw that we can extract to XML "any" infomation from the database we want, mainly through the GEP.
However, as I've seen, this Add-On can not import any XML file into SBO, unless for the BFP wich can be imported in conjunction with the BTHF Add-on.
So I ask: how is it possible to import XML data into SBO database? Is it possible to be done through the EFM? or it´s really necessary to write a code specifically to do that?
Besides, I know that de B1iSN fit to this necessity... but when I tried to use it, by the custom "object" for BP, for example, there are some data wich the mapping conteined in this custom "process" that can not be imported... I tried to understand how to map those other fields not imported by the custom but this has been dificult to me as I am a implementation consultant focused in administrative process not on development...
Could you please help me with this subject!
Thanks a lot,
Denis -
Best Practices:: How to generate XML file from a ResultSet
Hi all,
Could someone please suggest the best practices of how to generate an XML file from a resultset? I am developing a web application in Java with Oracle database and one of my tasks is to generate an XML file when the user, for example, click a "download as XML" button on the JSP. The application is basically like an Order with line items. I am using Struts and my first thought has been to have an action class which will extend struts's DownloadAction and through StAX's Iterator API to create an XML file. I intend to have a POJO which will have properties of all columns of my order and line items tables so that for each order I get all line items and:
1. Write order details then
2. Through an iterator write line items of that order to an XML file.
I will greatly appreciate for comments or suggestions on the best way to do this through any pointers on the Web.
alexUse a OracleWebRowSet in which an XML representation of the result set may be obtained.
http://www.oracle.com/technology/sample_code/tech/java/sqlj_jdbc/files/oracle10g/webrowset/Readme.html
http://download.oracle.com/docs/cd/B28359_01/java.111/b31224/jcrowset.htm -
How to Generate XML File from Java Code.
I want to generate the xml file from the java code.
Could you plz suggest any webSite address with example?Here is the code
import java.io.File;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.FactoryConfigurationError;
import javax.xml.parsers.ParserConfigurationException;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerConfigurationException;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
public class CreateXML {
private DocumentBuilderFactory factory = null;
private DocumentBuilder builder = null;
private Document document = null;
public CreateXML() {
try {
factory = DocumentBuilderFactory.newInstance();
builder = factory.newDocumentBuilder();
document = builder.newDocument();
} catch (FactoryConfigurationError e) {
e.printStackTrace();
} catch (ParserConfigurationException e) {
e.printStackTrace();
/** Creates the document for xml. */
public Document createDocument(){
try{
Element root = document.createElement("Root");
Element child = document.createElement("child");
root.appendChild(child);
document.appendChild(root);
}catch(RuntimeException e){
e.printStackTrace();
return document;
/** Saves the document as xml. */
public void saveDocument(Document document){
try{
TransformerFactory transFactory = TransformerFactory.newInstance();
Transformer transformer = transFactory.newTransformer();
DOMSource source = new DOMSource(document);
StreamResult stream = new StreamResult(new File("sample.xml"));
transformer.transform(source, stream);
System.out.println("XML Created !!");
}catch(TransformerConfigurationException e){
e.printStackTrace();
} catch (TransformerException e) {
e.printStackTrace();
public static void main(String args[]){
CreateXML createXML = new CreateXML();
Document document = createXML.createDocument();
createXML.saveDocument(document);
} -
How to generate xml file with multiple nodes using sqlserver as database in SSIS..
Hi ,
I have to generate the xml file using multiple nodes by using ssis and database is sqlserver.
Can some one guide me on to perform this task using script task?
sudhaWhy not use T-SQL for generating XML? You can use FOR XML for that
http://visakhm.blogspot.in/2014/05/t-sql-tips-fun-with-for-xml-path.html
http://visakhm.blogspot.in/2013/12/generating-nested-xml-structures-with.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
How to generate cacerts file for jar
how can i generate the cacerts for jar file to secure the applet?
how can i do it myself?
is it provided that function from Versign?
can you all give my step by step guildanceEven though JDK1.4 is not officially shipping the
Java Plugin 1.4 documents on Security are fairly
good. Check out :
http://java.sun.com:80/j2se/1.4/docs/guide/plugin/developer_guide/contents.html
http://java.sun.com:80/j2se/1.4/docs/guide/plugin/developer_guide/rsa_how.html
regards,
atsSun
Sun Microsystems
Maybe you are looking for
-
Change Logs to show for CRMD_ORDER tx changes to the activity notes area
Hi Does anyone know if there is a way to configure the change documents function in the transaction CRMD_ORDER when you have a business activity open to show the changes made to the activity notes section? This changes function is accessed via the to
-
SAP PI FTP sender adapter not working with SAP ECC over Itanium
Hi, We have been running normally SAP PI 7.0 SP14 with no issue for a while. We are now in the process of migrate the SAP ECC system from PA risc to IA platform. We are performing some tests between SAP PI and SAP ECC to check that the platform migra
-
HOW TO PUBLISH YOUR WEBSITE ..FROM IWEB ..WHEN I USE TO USE MOBILE ME .. BUT NOW THERE IS NO MOBILE ME BECAUSE OF ICLOUD, AND ICLOUD DOESN'T SUPPORT IWEB PUBLISHING?
-
Are all versions of mac 10.6 compatible with Photoshop CS4?
are all versions of mac os 10.6 compatible with Photoshop CS4?
-
Need 2 links in an Work item???
Hi Experts, I am having a requirement as i need to display the 2 Links which should route to a T-Code via a work item... I can display the 1 link for a transaction VA03 based on the Display method in a business object and in the same work item i need