How to genrarate intrnal object number (mara-cuobf) programmatically

Hi,
I would like to know how to create internal object number programtically either FM or BAPI, internal object nubmer is MARA-CUOBF field which is updated when we click the button configure variant in Material master data - Basic data 2.
Best regards
Manoj

probably with function module NUMBER_GET_NEXT

Similar Messages

How to download the object number for the software package

Hello:
I received the CD for Netweaver 2004s SR2. So trying to install it. But figured that I need to download some patches with object ID like 51032258_1 etc.
It referred to service.sap.com
I have the userid/password but dont know how to download the required patches. Would appreciate if someone can give me some pointers.
Thanks for your help.
Regards,
Ravi

As i understand you are trying to download the file 51032258_1 ?
go to http://service.sap.com/swdc and search for the file.
Hope this is what you want ?
Thanks
Kalyan..
Reward if you get any help from this message.

How to find out the Number range object for Incident number

How to find out the Number range object for Incident number ?
CCIHT_IAL-IALID
regards,
lavanya

HI, an example.
data: vl_num type i,
      vl_char(6) type c,
      vl_qty type INRI-QUANTITY,
      vl_rc type INRI-RETURNCODE.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
    NR_RANGE_NR                   = '01'
    OBJECT                        = 'ZRG0000001'
   QUANTITY                       = '1'
SUBOBJECT                     = ' '
TOYEAR                        = '0000'
IGNORE_BUFFER                 = ' '
IMPORTING
   NUMBER                        = vl_num
   QUANTITY                      = vl_qty
   RETURNCODE                    = vl_rc
EXCEPTIONS
   INTERVAL_NOT_FOUND            = 1
   NUMBER_RANGE_NOT_INTERN       = 2
   OBJECT_NOT_FOUND              = 3
   QUANTITY_IS_0                 = 4
   QUANTITY_IS_NOT_1             = 5
   INTERVAL_OVERFLOW             = 6
   BUFFER_OVERFLOW               = 7
   OTHERS                        = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
vl_char = vl_num.
write vl_char.
Regard

How to get Configuration (internal object number) during MM01

Hello Masters,
Does anyone know how to get the value of Configuration (internal object number) during MM01 so I can use the function VC_I_GET_CONFIGURATION to get the configurable variant values. I tried to check the MM01 exit EXIT_SAPLCUKO_001 include ZXCUCU02 and it' there but I need to know how to get it so I can use it because in other exits it's not included in the local variable.
Thanks,
Alfred

pl. share the answer with us. U can copy and paste that answer.......so that, some one get the solution, who r hving the same issue.
thanq

How to get the link between mara, ausp, cawn and cawnt tables

hello ABAPERS
i have got a requiremet in that i have to get the relation .
how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp and mara tables.
I would be very thankful for ur help in advance.
Thanks & Regards.
soni

Hi,
Sample report using the linkage between tables;
report batch_char no standard page heading
                          line-size 132
                          line-count 58(1)
                          message-id mm.
       Report by Batch Characteristic                                *
Description          : Report by Batch Characteristic                *
Declaration for Tables
tables: mara,    " Material Master
        mard,    " Storage Location Data for Material
        t001w,   " Plants/Branches
        t001l,   " Storage Locations
        cabn,    " Characteristics
        inob.    " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023',     " Class Type
            c_obtab like inob-obtab value 'MCH1',    " Database Table
            c_flag type c          value 'X',       " Flag
            c_c23   type i          value '23',      " Ratio
Constants for Ratio Categories
            c_13    type p decimals 2 value '13.00', " For Ratio 13
            c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
            c_15    type p decimals 2 value '15.00', " For Ratio 15
            c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
            c_17    type p decimals 2 value '17.00', " For Ratio 17
            c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
            c_19    type p decimals 2 value '19.00', " For Ratio 19
            c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
            c_21    type p decimals 2 value '21.00', " For Ratio 21
            c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
            c_23    type p decimals 2 value '23.00', " For Ratio 23
            c_g23(4) type c value '>=23',            " For Ratio >=23
            c_ratio(5) value 'RATIO',                  " For Ratio
Constants for Storing Selected item field information
            c_cursor1(15) value 'I_OUTPUT1-MEINS',   " For Selected Base
                                                     " Unit of Measure
            c_cursor2(15) value 'I_OUTPUT1-MATNR',   " For Selected Base
                                                     " Material Number
            c_cursor3(15) value 'I_OUTPUT1-MAKTX',   " For Selected Base
                                                     " Material Des.
            c_cursor4(15) value 'I_OUTPUT1-CLABS',   "For Selected Base
                                                     " Stock Value
            c_cursor5(15) value 'I_OUTPUT1-ATFLV',   " For Selected Base
                                                    " Char.Value (Ratio)
            c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c,                            " Flag
       g_clabs1(16) type c,                       " Quantity
       g_clabs(18) type c,                       " Quantity
       g_cursor(15) type c,                       " Cursor field name
       g_matnr     type mara-matnr,               " Material Number
       g_werks     type mchb-werks,               " Plant
       g_atinn(30) type c.                        " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
         matnr like mchb-matnr,      " Material Number
         werks like mchb-werks,      " Plant
         lgort like mchb-lgort,      " Storage Location
         charg like mchb-charg,      " Batch Number
         clabs like mchb-clabs,      " Stock Value
         meins like mara-meins,      " Unit of measure
         atflo like ausp-atflv,      " Char.Value (Ratio)
         atflv like ausp-atflv,      " Char.Value (Ratio)
       end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
         werks like mchb-werks,      " Plant
         matnr like mchb-matnr,      " Material Number
         lgort like mchb-lgort,      " Storage Location
         charg like mchb-charg,      " Batch Number
         atinn like ausp-atinn,      " Char.Value
         clabs like mchb-clabs,      " Stock Value
         atflo like ausp-atflv,      " Char.Value (Ratio)
         atflv like ausp-atflv,      " Char.Value (Ratio)
       end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
         werks like t001w-werks,     " Plant
         name1 like t001w-name1,     " Name
       end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
         matnr like makt-matnr,      " Material
         maktx like makt-maktx,     " Description
       end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
         objek like ausp-objek,      " Object No
         atinn like cabn-atinn,      " Characteric value
         atflv like ausp-atflv,      " Characteristic Value
       end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
         atinn like cabn-atinn,      " Characteric value
         werks like mchb-werks,      " Plant
         matnr like mchb-matnr,      " Material Number
         atnam like cabn-atnam,      " Characteristic
         atflv like ausp-atflv,      " Char.Value (Ratio)
         name1 like t001w-name1,     " Plant Description
         maktx like makt-maktx,      " Material Description
         clabs like mchb-clabs,      " Stock Value
         meins like mara-meins,      " Base Unit of Measure
       end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
         atinn like cabn-atinn,      " Characteric value
         werks like mchb-werks,      " Plant
         matnr like mchb-matnr,      " Material Number
         atnam like cabn-atnam,      " Characteristic
         atflv(32) type c,           " Char.Value (Ratio)
         name1 like t001w-name1,     " Plant Description
         maktx like makt-maktx,      " Material Description
         clabs like mchb-clabs,      " Stock Value
         meins like mara-meins,      " Base Unit of Measure
       end of i_output1.
       Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
                s_lgort for t001l-lgort,             " Stor.Location
                s_matnr for mara-matnr obligatory, " Material No
                s_atinn for cabn-atinn.              " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
    perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
    perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
      Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
    select werks
      into t001w-werks
      from t001w
      up to 1 rows
      where werks in s_werks.
    endselect.
    if sy-subrc <> 0.
      message e899 with 'Enter Valid Plant'(002).
    endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
    select matnr
      into mara-matnr
      from mara
      up to 1 rows
      where matnr in s_matnr.
    endselect.
    if sy-subrc <> 0.
      message e899 with 'Enter Valid Material'(003).
    endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
    select lgort
      into t001l-lgort
      from t001l
      up to 1 rows
      where lgort in s_lgort.
    endselect.
    if sy-subrc <> 0.
      message e899 with 'Enter Valid Storage Location'(004).
    endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
    select atinn
      into cabn-atinn
      from cabn
      up to 1 rows
      where atinn in s_atinn.
    endselect.
    if sy-subrc <> 0.
      message e899 with 'Enter Valid Characteristic Value'(005).
    endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
    into (mard-matnr, mard-werks, mard-lgort)
    from mard
    up to 1 rows
    where matnr in s_matnr and
          werks in s_werks and
          lgort in s_lgort.
endselect.
if sy-subrc <> 0.
    message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform.                          "validate_screen
*&      Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
       exporting
            repid    = l_repid
            heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18)   'Material Number'(008) centered,
          20 sy-vline, 21(40) 'Material Description'(011) centered,
          61 sy-vline, 62(22) 'Ratio'(009) centered,
          84 sy-vline, 85(18) 'Quantity'(010) centered,
         103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
         125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform.                    "get_headings
*&      Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr       " Material Number
         b~werks       " Plant
         b~lgort       " Storage Location
         b~charg       " Batch Number
         b~clabs       " Stock Value
         a~meins       " Base Unit of Measure
      into table i_mchb
      from mara as a inner join mchb as b
      on amatnr eq bmatnr
      where b~matnr in s_matnr and
            b~werks in s_werks and
            b~lgort in s_lgort.
if sy-subrc <> 0.
    g_exit = c_flag.
    message s899 with 'No Data found for the Selection Criteria'(006).
    stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform.                    " get_mat_stock_data
*&      Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
    clear i_plant.
    refresh i_plant.
    select werks      " Plant
           name1      " Name
      into table i_plant
      from t001w
      for all entries in i_mchb
      where werks = i_mchb-werks.
Get the Material Description from MAKT Table
    clear i_makt.
    refresh i_makt.
    select matnr      " Material number
           maktx      " Material Description
      into table i_makt
      from makt
      for all entries in i_mchb
      where matnr = i_mchb-matnr and
            spras = sy-langu.
    sort i_plant by werks.
    delete adjacent duplicates from i_plant comparing werks.
    sort i_makt by matnr.
    delete adjacent duplicates from i_makt comparing matnr.
endif.
endform.                   "form get_plant_grp_data.
*&      Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
         l_tabix like sy-tabix.
if not i_mchb[] is initial.
    loop at i_mchb.
      l_tabix = sy-tabix.
      clear l_matbatch.
      concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
      move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
        read table i_plant with key werks = i_mchb-werks binary search.
        if sy-subrc = 0.
          i_output-name1 = i_plant-name1.
        endif.
Get the Material Description from i_makt Table
      read table i_makt with key matnr = i_mchb-matnr binary search.
      if sy-subrc = 0.
        i_output-maktx = i_makt-maktx.
      endif.
Get the Characteristic Values data from INOB and AUSP Tables
      clear inob.
      select single cuobj from inob
          into inob-cuobj
          where klart = c_klart and
                obtab = c_obtab and
                objek = l_matbatch.
      if sy-subrc = 0.
        select objek
               atinn
               atflv
           from ausp
           into table i_ausp
           where objek = inob-cuobj and
                 atinn in s_atinn   and
                 klart = c_klart.
        sort i_ausp by objek atinn.
        loop at i_ausp.
          clear cabn.
          select single atinn atnam from cabn
                     into (cabn-atinn,cabn-atnam)
                     where atinn = i_ausp-atinn.
          if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
            if cabn-atnam cs c_ratio.
              if i_ausp-atflv between c_13 and c_1499.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
              elseif i_ausp-atflv between c_15 and c_1699.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
              elseif i_ausp-atflv between c_17 and c_1899.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
              elseif i_ausp-atflv between c_19 and c_2099.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
              elseif i_ausp-atflv between c_21 and c_2299.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
              elseif i_ausp-atflv >= c_23.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_23.
              endif.           " Condition for RATIO values
            else.              " If characteristic does contain RATIO
              i_mchb-atflv = i_ausp-atflv.
            endif.
            i_output-atinn = cabn-atinn.
            i_output-atnam = cabn-atnam.
            i_output-atflv = i_ausp-atflv.
            i_mchb1-matnr = i_mchb-matnr.
            i_mchb1-werks = i_mchb-werks.
            i_mchb1-lgort = i_mchb-lgort.
            i_mchb1-charg = i_mchb-charg.
            i_mchb1-clabs = i_mchb-clabs.
            i_mchb1-atinn = i_ausp-atinn.
            i_mchb1-atflo = i_mchb-atflv.
            i_mchb1-atflv = i_ausp-atflv.
            append : i_output, i_mchb1.
            clear i_mchb1.
            modify i_mchb index l_tabix transporting atflo atflv .
          endif.
        endloop.
      endif.
    endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
    sort i_output by atinn werks matnr atflv.
else.
    g_exit = c_flag.
    message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform.                    "append_final_data
*&      Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
    l_tabix = sy-tabix.
At new Characteristic
     at new atinn.
      read table i_output1 index l_tabix.
      format color 1 intensified on.
      write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
             23(40) i_output1-atnam,
             125 sy-vline.
      format color off.
      format color 4 intensified on.
      write: /1 sy-vline, 2(20) 'Plant Name         :'(022),
             23(4) i_output1-werks, 29(30) i_output1-name1,
             125 sy-vline.
      format color off.
      write /1(125) sy-uline.
    endat.
    clear: g_clabs, g_clabs1.
    format color col_normal.
    write :/1 sy-vline, 2(18)   i_output1-matnr,
           20 sy-vline, 21(40) i_output1-maktx,
           61 sy-vline.
    if i_output1-atflv = c_c23.
      write: 62(22) c_g23 centered.
    else.
      shift i_output1-atflv left deleting leading space.
      write: 62(22) i_output1-atflv centered.
    endif.
    write: 84     sy-vline,
           103     sy-vline,
           110(5) i_output1-meins.
If the quantity value is negative
    if i_output1-clabs ge 0.
      write: 85(18) i_output1-clabs unit i_mchb-meins,
            125     sy-vline.
    else.
      i_output1-clabs = - i_output1-clabs.
      write i_output1-clabs unit i_mchb-meins to g_clabs1.
      condense g_clabs1.
      concatenate '(' g_clabs1 ')' into g_clabs separated by space.
      write: 85(18) g_clabs right-justified,
           125 sy-vline.
    endif.
    format color off.
    hide : i_output1.
    new-line.
At end of material
    at end of matnr.
      sum.
      move : i_output1-matnr to g_matnr.
      format color 3 intensified on.
      write /1(125) sy-uline.
      write :/1 sy-vline, 2(25) 'Total for Material      :'(012),
             28(18) g_matnr.
      if i_output1-clabs ge 0.
        write: 85(18) i_output1-clabs unit i_mchb-meins,
        125 sy-vline.
      else.
        i_output1-clabs = - i_output1-clabs.
        write i_output1-clabs unit i_mchb-meins to g_clabs1.
        condense g_clabs1.
        concatenate '(' g_clabs1 ')' into g_clabs separated by space.
        write: 85(18) g_clabs right-justified,
             125 sy-vline.
      endif.
      write: 125 sy-vline.
      format color off.
      write /1(125) sy-uline.
    endat.
At end of plant
    at end of werks.
      sum.
      move : i_output1-werks to g_werks.
      format color 3 intensified off.
      write :/1 sy-vline, 2(25) 'Total for Plant          :'(013),
             28(4) g_werks.
      if i_output1-clabs ge 0.
        write: 85(18) i_output1-clabs unit i_mchb-meins,
        125 sy-vline.
      else.
        i_output1-clabs = - i_output1-clabs.
        write i_output1-clabs unit i_mchb-meins to g_clabs1.
        condense g_clabs1.
        concatenate '(' g_clabs1 ')' into g_clabs separated by space.
        write: 85(18) g_clabs right-justified,
             125 sy-vline.
      endif.
      format color off.
      write /1(125) sy-uline.
    endat.
At end of characteristic
    at end of atinn.
      read table i_output1 index l_tabix.
      sum.
      format color 3 intensified on.
      write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
             28(25) i_output1-atnam.
      if i_output1-clabs ge 0.
        write: 85(18) i_output1-clabs unit i_mchb-meins,
        125 sy-vline.
      else.
        i_output1-clabs = - i_output1-clabs.
        write i_output1-clabs unit i_mchb-meins to g_clabs1.
        condense g_clabs1.
        concatenate '(' g_clabs1 ')' into g_clabs separated by space.
        write: 85(18) g_clabs right-justified,
             125 sy-vline.
      endif.
      format color off.
      write /1(125) sy-uline.
    endat.
endloop.
endform.                    " display_report
*&      Form DISPLAY_BATCH
     Display the batch details for the seclected material            *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
     g_cursor = c_cursor2 or
     g_cursor = c_cursor3 or
     g_cursor = c_cursor4 or
     g_cursor = c_cursor5 or
     g_cursor = c_cursor6.
    format color 3.
    write: /1 sy-vline,
            2(17) 'Material Number :'(020),
           20(17) i_output1-matnr,
           94 sy-vline.
    format color off.
    write /1(94) sy-uline.
    loop at i_mchb1 where matnr = i_output1-matnr and
                          atinn = i_output1-atinn and
                          atflo = i_output1-atflv.
      format color col_normal.
      shift i_mchb1-charg left deleting leading '0'.
      write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
             18 sy-vline, 19(17) i_mchb1-charg centered,
             36 sy-vline.
      if i_output1-atnam cs c_ratio.
        write: 37(29) i_mchb1-atflv
                       exponent 0 decimals 2 centered.
      else.
        write : 37(29) i_mchb1-atflv
                      exponent 0 decimals 0 centered.
      endif.
      write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
              94 sy-vline.
      format color off.
    endloop.
    write /1(94) sy-uline.
else.
    message s899 with 'Invalid cursor position'(016).
    exit.
endif.
endform.                    " DISPLAY_BATCH
*&      Form HEADING_SECLIST
      Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
         18 sy-vline, 19(17) 'Batch Number'(017) centered,
         36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
         66 sy-vline, 67(27) 'Quantity'(019) centered,
         94 sy-vline.
write /1(94) sy-uline.
format color off.
endform.                    " HEADING_SECLIST
*&      Form COLLECT_RATIO
      Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
    clear g_atinn.
    i_output1-atinn = i_output-atinn.
    i_output1-atnam = i_output-atnam .
    i_output1-werks = i_output-werks.
    i_output1-name1 = i_output-name1.
    i_output1-matnr = i_output-matnr.
    i_output1-maktx = i_output-maktx.
    i_output1-clabs = i_output-clabs.
    i_output1-meins = i_output-meins.
    call function 'CONVERSION_EXIT_ATINN_OUTPUT'
         exporting
              input = i_output-atinn
         importing
              output = g_atinn.
    if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
      if i_output-atflv between c_13 and c_1499.
        i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
      elseif i_output-atflv between c_15 and c_1699.
        i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
      elseif i_output-atflv between c_17 and c_1899.
        i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
      elseif i_output-atflv between c_19 and c_2099.
        i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
      elseif i_output-atflv between c_21 and c_2299.
        i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
      elseif i_output-atflv >= c_23.
        i_output1-atflv = c_23.
      endif.
      write i_output1-atflv to i_output1-atflv .
    else.
      write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
    endif.
    collect i_output1.
    clear   i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform.                    " COLLECT_RATIO
Reward if useful..
Regards,
Anji

How to delete all objects in a package?

Hello,
I've seen a similar question here. But is there a tool or a smart way to delete all objects in a dev class or a transport request?
Best Regards
Volker

These are really 3 questions??
1. To delete objects in a request there are a number of ways, here is one:
Position cursor on modifiable request.
Double click on request and choose 'Objects' tab
Choose object line you want to delete and click 'Delete'
Save your changes.
2. To delete objects in a Dev Class:
Go to work bench --> edit object, Class and give your class name, you will see delete option at the bottom of the screen.
3. How to delete all objects in a package:
here is a link with the steps you need for this: http://benxbrain.com/en/index.do?onInputProcessing(brai_object_thread)&001_threadid=0000161442&sysid=WP5&pgmid=R3TR&object=DOMA&obj_name=DEVCLASS&child_param=

How to delete the Request Number

Hi all,
How to delete the Requset Number in Development Client.Already i transported this Req. Number to Tesing Client.

For what purpose, deleting the request number won't restore your dev system. You can remove the request from the import queues via transaction STMS to insure it will not be accidentally imported.
You can usually only destroy a request in source system if it has not been released and all objects are unlocked, but this is risky in some cases and may cause a loss of information or coherence.
Regards

How do I count the number of records returned in the CMIS query

How do I count the number of records returned in the query CMIS?
SELECT COUNT(*) FROM ora:t:IDC:GlobalProfile WHERE ora:p:xRegionDefinition = \'RD_PROJETOS_EXCLUSIVOS\''}
Euler Homero

Hi Euler,
interestingly enough, the reference guide for CMIS ( http://wiki.alfresco.com/wiki/CMIS_Query_Language ) that I found does not mention the COUNT function at all. On the other hand it states that: "The SELECT clause identifies which virtual columns to return in the result set. It can be either a comma-separated list of one or more queryNames of properties that are defined by queryable object types or * for all virtual columns."
There are, however, some other posts like e.g. http://alfrescoshare.wordpress.com/2010/01/20/count-the-total-number-of-documents-in-alfresco-using-sql/ which state that they could make it working.
Having asked in the WebCenter Portal forum, I assume that your content repository is WebCenter Content. The CMIS doc for the Content is available here: http://docs.oracle.com/cd/E23943_01/doc.1111/e15813.pdf (no COUNT there either). It does, however, mention explicitly that "CMIS queries return a Result Set where each Entry object will contain only the properties that were specified in the query.". This means your could rather investigate the Result Set. Note that there are also other means than CMIS how to get the requested result set (e.g. calling a search service directly via so-called RIDC).
In the given context I am also interested what your use case is. OOTB CMIS in WebCenter Portal is used, for instance, in Content Presenter, where it is content rather than "parameters" what's displayed.

How do I find the number of users returned by a cfldap query?

How do I find the number of users returned by a cfldap query?
I'm not allowed to do something like:
<cfif ArrayLen(results.rows) gt 1>
I then get an error:
faultCode:Server.Processing faultString:'Unable to invoke CFC - Object of type class coldfusion.tagext.net.LdapResultTable cannot be used as an array' faultDetail:''
Many thanks for any light you can shed

Cheers again Ian for your many helps,
it now won't let me do
<cfqueryparam value="#results.USNCreated#" cfsqltype="cf_sql_varchar">
I get the message:
faultCode:Server.Processing faultString:'Unable to invoke CFC - Error Executing Database Query.' faultDetail:'[Macromedia][SQLServer JDBC Driver][SQLServer]The name "results.USNCreated" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.'

How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file?

How can we send only one message to a WCF service at a time? How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file? Can we do it by Host throttling?

Hi Pawan,
You need to use WCF-Custom adapter and add the ServiceThrottlingBehavior service behavior to a WCF-Custom Locations.
ServiceThrottlingBehavior.MaxConcurrentCalls - Gets or sets a value that specifies the maximum number of messages actively processing across a ServiceHost. The MaxConcurrentCalls property specifies the maximum number of messages actively
processing across a ServiceHost object. Each channel can have one pending message that does not count against the value of MaxConcurrentCalls until WCF begins to process it.
Follow MSDN-
http://msdn.microsoft.com/en-us/library/ee377035%28BTS.10%29.aspx
http://msdn.microsoft.com/en-us/library/system.servicemodel.description.servicethrottlingbehavior.maxconcurrentcalls.aspx
I hope this helps.
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to get the total number of pages printed in a report?

Hi All,
I have a requirement where I need to print a frame of fields only in the last page. Unfortunately I cannot use the 'Print Object On' property as it doesnt work in my case. So, I am planning to write a format trigger on the frame to return TRUE if the page is the last physical page. Now, I need to know how to get the total number of physical pages that will get printed in the report so that I can use this to manipulate the frame. I was planning to use the 'Total Physical Pages' built-in, but it seems like I can just use it to print in a field and I can't use this field's value anywhere in the plsql code (formula column function/format trigger) in the report. Is there anyway to get the total number of pages printed in the report which can be used in the report plsql code?
Thanks,
Srini.

i found the solution, thanks

HOw to make an Object oriented alv respond to double click

Hi all,
HOw to make an Object oriented alv respond to double click.SAmple code will be helpful.
Thanks in advance,
Alex.

Hi,
1. Create a Control (for Custom and Split Containers only)
2. Instantiate a Container Object (in case of Custom and Split Containers, specify the control which is created by us in Screen painter) CREATE OBJECT
3. Instantiate an Object of the kind of report that has to be displayed (List, Grid or Tree). CREATE OBJECT . Here we need to specify the Parent Container as the so that it sits in that container.
4. Call appropriate methods to display the report on the screen. CALL METHOD ->
DATA : g_dock TYPE REF TO cl_gui_docking_container,
g_split TYPE REF TO cl_gui_easy_splitter_container,
g_cont1 TYPE REF TO cl_gui_container,
g_cont2 TYPE REF TO cl_gui_container,
g_grid1 TYPE REF TO cl_gui_alv_grid,
g_grid2 TYPE REF TO cl_gui_alv_grid.
i_mara is an internal table of structure MARA
SELECT * FROM mara INTO TABLE i_mara.
i_kna1 is an internal table of structure KNA1
SELECT * FROM kna1 INTO TABLE i_kna1.
To create an Object of type Docking Container
CREATE OBJECT g_dock
EXPORTING
side = cl_gui_docking_container=>dock_at_top
extension = 200 .
To Create an Object of Type Split Container. Here we can see that the Docking *Container Created above has been used as a parent .
CREATE OBJECT g_split
EXPORTING
parent = g_dock
orientation = 1 .
Easy Split container splits one Control into 2 manageable controls, each of them is used * to handle one GUI Container each
g_cont1 = g_split->top_left_container.
g_cont2 = g_split->bottom_right_container.
To Create an Object of type Grid . Here we can see that the Left Split Container * Created above has been used as a parent .
CREATE OBJECT g_grid1
EXPORTING
i_parent = g_cont1 .
To Create an Object of type Grid . Here we can see that the Right Split Container * Created above has been used as a parent .
CREATE OBJECT g_grid2
EXPORTING
i_parent = g_cont2 .
The method of Grid Control Object is used to display the Data.
CALL METHOD g_grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'MARA'
CHANGING
it_outtab = i_mara[] .
The method of Grid Control Object is used to display the Data.
CALL METHOD g_grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'KNA1'
CHANGING
it_outtab = i_kna1[] .
Regards
Hari

How to create an object for this Question...

i want to create an object to Factorial.java, but the class is in String object... how can i do that
please help me with code how to create an object
String str = Factorial.java;
i tried to do like this
str s1 = new str();
this way is not working...
thank u

yes sir am trying to instantiate and retrieve the metadata, am a student am asked to do Program Analyzer, while fullfilling the application requirements i came across this situation, like i have to find total number of public methods in any source file that is entered as input.
Am taking the input in String variable, i can have the details of the source class only of i instantiate and create an Object to that....
Please suggest me some way to do that... JAVA is so interesting am working on the project since 2 weeks am done with all other classes but struck here finding the total number of methods...
Thank you

How to get the Page Number in CS3 with VB?

Hi, Everybody
I use the Visual Basic to read the words and their page number where the Words are at. I want to do it according to Story. Some TextFrame of the Story waw placed in other pages: How can I get the Page number according to the Word that is selected?
For myStoryCounter = 1 to Document.Stories.Count
Set myStory = Document.Stories.Item(myStoryCounter)
For myWordCounter = 1 to myStory.Words.Count
Set myWord = myStory.Words.Item(myWordCounter)
myWordContents = myWord.Contents
Rem ** How to Get the Page Number according to the Word ***
Next
Next

> But I don't understand why Item(1) are set.
because Word can have more than one parent TextFrame - when split across TextFrames
only Character have one ParentTextFrame accessed also by ParentTextFrames.Item(1)
> why Story.TextFrames.Count alway is 0, Is it bug?
no - it's not bug
in older IDs - Story.TextFrames collection refer to all TextFrames as containers for Story text
but in CS3 - collection Story.TextFrames contain all TextFrames inserted as InLine/Anchored objects - same like Story.Rectangles or Story.Ovals
in CS3 - when you want to refer to TextFrames as containers for Story text - you need to use Story.TextContainers - because now you can link TextFrame and Text-On-Path as Story - Text-On-Path isn't TextFrame
robin
www.adobescripts.com

How to Get last page number in report 10g

I want to get last page number in report but Current page number found from srw.get_page_num(n)
but i want to get last page number for conditional formating like this
srw.get_page_num(current_page)=last_page
pls help me how can get last page number;
pls help;
thanks in advanced;

Hi,
you can use the Property Print Object On for this.
Regards
Rainer

How to genrarate intrnal object number (mara-cuobf) programmatically

Similar Messages

Maybe you are looking for