How to get 2 builders working on same site
Hi everyone,
I'm very new to DW and need some help in setting up 2 users
to work on a web page at the same time on separate computers.
If anyone could run it by me it would be much appreciated.
Thanks!
As a clarification, you can't have two developers work on the same page at the same time. Same site, yes. Same page - no. You'll have to "hand it" back and forth. One work on the page, check it in, then the other. I've found doing this and having IM or Skype chat, or the like running so you can communicate back and forth as you go makes for a really good workflow.
Lawrence *Adobe Community Expert*
www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in ASP, PHP and CF
Similar Messages
-
When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, WI'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster. -
I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.
-
Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?
Hi connally25,
Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
Facebook Follow Widget not working
Regards
Sonam -
How to get two parameters in the same line of selection screen?
hello
i need to get my selection csreen like bellow.
r1 radiobuttion -some space --p1 parameter
i should not get the parameter in the next line of radiobuttion.
how to get two parameters in the same line of selection screen?hi....
modify the following code
it will work
SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) TEXT-001
FOR FIELD P1.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS : P1 TYPE C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
P2 TYPE SCARR-CARRNAME,
P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SL1. -
having attempted to upgrade to iO7 latest op system,the Ipad has stuck on the Terms & conditions page.It will not accept my agreement to terms and conditions or allow me to read them.
Ideas please on how to get it to work again,which will have to be via my lap top!
It sound as if the iPad is woking in the background-i.e.receiving eMails.Reset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?
On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed. -
iTunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help
It is likely a hardware failure
http://support.apple.com/kb/TS3694?viewlocale=en_US#error1 -
i just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!
Did you enable Siri in settings?
Settings > General > Siri > ON
If Siri is off, all you get when pressing the home button for 1 second is the old Voice Control. -
I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !
Software Update?
-
I have a 4s iPhone which I loaded the new Os on last night. Now I can not connect to iTunes. A message comes up saying i need 10.6.3 or later but I am running 10.6.1 as I have an older Mac. Anyone have ideas how to get this to work?
Its not telling you to update your iPad, its telling you you need to download a recent version itunes on your computer.
Go here to download the newest version of iTunes.
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com -
How to get Google Gmail working in Yosemite? (not just in Mail)
How to get Google Gmail working in Yosemite? Mail is working. Gmail is coming to Mail. I want to use gmail in Google on the web as I have in the past.
MrAtheist wrote:
It's even an irony that this forum doesnt work on safari at all. All the buttons are just ... buttons. Nothing works when you click on it (i.e. filtering, tagging, etc).
Even more ironic is the fact that I use nothing but Safari, and it works correctly in Gmail, as well as on this site. -
When launching Illustrator on Mac OSX 10.9 I get an error that the program is no longer supported on PowerPC. I tried moving the plug-ins to a different folder as the Adobe site suggested but no luck. Any ideas how to get this launched again? Same issue for Photoshop and InDesign
You will need to uninstall, run the Cleaner tool and reinstall you adobe applications. Adobe apps don't take kindly to inplace updates of the OS on Macs.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
How to get WLAN card working on Tecra M1?
I just bought a Tecra M1, 2nd Hand. Great! There is XP installed but no Toshiba tools. I can't manage to get access to my WLAN router. Seems as if the WLAN connection isn't installed yet. As I know from my Satellite Pro M30, there are Toshiba tools for that, they work smart.
Maybe I would need the drivers - WXP finds unknown hardware during start up - could be the WLAN device - who knows.
When I check the network connections, I find 1934 and LAN adapter, but no WLAN device. I already ran the XP assistant for WLAN connections, entered SSID and hex Key; but no WLAN device shows up.
So, has anybody an idea how to get the WLAN working?
Is there a possibility to get the M1 Toshiba Software or can I use my SatPro Software?
Thanks so far JanMy question seems to be difficult... No reply at all
But keeping on searching I found some links to other Toshiba sites
There I found the required drivers for the WLAN
Once the driver is installed, the WLAN device was proper configurable.
The second hardware device that was found and specified as unknown, was the IR Device. I took a driver from my SatPro CD. All fine so far.
By that way: I couldnt find the utilities for download, but I tries to uses the SatPro CD - that works
Hoping that my experiences will help somebody else I mark my question as being answered.
So far Jan -
Mozilla Fire Fox 4, Bookmark Toolbar, how to get it to work?
Mozilla Fire Fox 4, Bookmark Toolbar, how to get it to work?
Hi,
the bookmarks toolbar is blank, it can be turned on or off, but the bookmarks, which are in the toolbar folder when I view all my bookmarks, don't appear in the toolbar. This is when using windows xp. When using windows 7 at home, it works fine. thanks.
Maybe you are looking for
-
I'm having a major problem here. I was upgrading my Desk Manager and Device Software last night when I got the "App Error 523" message on my 8800 WE. I tried pulling battery out but it went right back to the error message. I tried connecting to the d
-
Purchase Order IDoc Output Error
I'm having a problem creating IDoc output for a vender PO. I have the vender setup in WE20 with outbound parameters: Partn.funct. VN Message Type: ORDERS Basic Type: ORDERS05 Application: EF Message Type: NEU Process Code: ME10 In the PO Output cond
-
Using Oracle Text with CLOB field containing multiple languages
I'm using Oracle 10g (NLS_CHARACTERSET is set to. AL32UTF8) and have a table with a CLOB field which is storing text written in either English and/or Simplified Chinese. The following index has been created on this field: CREATE INDEX text_index ON t
-
Maximum size for JPanel in BorderLayout
I'am using a BorderLayout in my JFrame. I want to place a JPanel in BorderLayout.CENTER. The problem: It should use the maximum possible space. For example, if I place a JButton in CENTER, the JButton will grow very big. I want the same behaviour for
-
Which cover is the best for waterproofing?
I just bought a new iPhone 5s. I want to get a case that keeps out sand and saltwater. Which case is the best one in your opinion? I've found at the phone store that they recommend Lifeproof. Thanks for your input.