How to get 2 spools for the same SAP script

Hi,
I have a requirement where i have to get 2 spools when i run the script once. Please suggest me the how to achieve this.
Thanks in advance.

Hi,
I believe u need different pages of the Scirpt output on diffrent spools.
If Yes, Use START_FORM & END_FORM in the looping of your MAIN window data in Driver program.
Regards,
Bhargava

Similar Messages

White line appears on jpeg export in indesign CS6? How to get rid of the same?

White line appears on jpeg export in indesign CS6? How to get rid of the same?

Please find attached actual jpeg and the screen shot of settings at which the jpeg is exported.

Conflict between 2 business services for the same SAP R/3 instance

Hi,
We developed a packaged solution that connects to SAP R/3 with RFC Adaptor and idoc Adaptor.
We deliver design and configuration packages defining the entire integration schema between an external system and SAP.
The configuration defines a business service BS_SAP_R3 containing RFC and idoc communications channels.
When we deploy and configure the solution (design and config) on a XI instance we have a conflict.
As the XI already contains a Business Service connecting to the same SAP instance (other integration) we want to use with our business service BS_SAP_R3, we have an error when configuring the Adapter-Specific Identifiers properties R/3 System ID and Client from the section IDoc Adapter and RFC Adapter with the message, for the BS_SAP_R3
Check Result for Object BS_SAP_R3
SAP system ID D46 and client 800 already exist in service | BC_TEST_SAP_R3 
Is there a way to solve this conflict problem?
Thanks for your help.
Adalbert

Dzieki za odpowiedz
Could you give more details about the design issue and what you have on mind?
I also suspect a design issue but do not know how to solve it...
If in your Configuration you have 150 Receivers Determinations, Interface Determinations and Receiver Agreements referencing the same BS business service to access SAP, can you make the service configurable in any sort
Can you recommend another solution?
The only solution I see it to regenerate all the configuration by hand using the already exiting SAP BS But for 150 objects it is not a real solution...
Thanks for your help
Adalbert
Wojtek

Column Link - how to get back to the same row on previous form

Using Apex 3.2.1
I've created a column link on an updateable report which opens up another page for data entry. This is working fine but when you return to the originating page, is there a way to get back to the same row you were on before linking.
The user enters a number in the AMOUNT field. A validation trigger says they need to enter an EXPLANATION. They link to the EXPLANATION page. But when they return to the first page, they don't know which row they were on AND the value they originally entered in AMOUNT is back to the database value. So is there a way to preserve the AMOUNT value and rowid from the originating page?
Hope this makes sense and appreciate any and all help!
Sandie

Hi Sandie,
I may not be understanding the requirements completely, but one thing that strikes me off the bat is it sounds like what you need isn't really a "validation" per se. The data the user is entering may be perfectly valid, it's just that in certain circumstances additional information is required. I only mention this because an ApEx validation by definition shouldn't allow changes to be made to the database - but in your case it sounds like the information entered up to that point can be saved (as long as it satisfies actual data validation rules), but then additional information for certain rows is required.
One thing you might consider is having the Explanation page pop-up in a new window. So user is on tabular form with current row visible - user clicks on explanation link which pops up a new page - user enters explanation and clicks "submit" - pop-up page disappears leaving user right where he/she was.
Hope this helps,
John
If you find this information useful, please remember to mark the post "helpful" or "correct" so that others may benefit as well.

I was wondering how the advertised 10G multiple line plan that is running now is different from my current plan. Basically, why am I paying more now for 4G of data when Verizon is saying I can get 10 for the same price basically.

NM

Most of the advertisements running now are for Edge. You get discounts for having a smart phone on Edge based on the data package you have. What sucks is that most of the time they advertise a certain price for the monthly service and that is true but what they don't say is you add the Edge payments to that and most of the time it is around the same price as without Edge.
If you think about this though, say you get a phone that is $24.99/month with Edge and you share 10GB which gives you a $25 discount, the phone is basically free and nothing is due at checkout. If you get a 2 year contract with that phone you pay the 2 year price of the phone and pay the same amount monthly.

How can multiple files for the same genre be consolidated

I organize my iTunes files in genre folders for easy access. ITunes creates multiple folders for some genres and allows a single (preferred) genre file for other much larger files. How can I consolidate multiple files with the same genre?

Thanks. I've done what you selected. The problem is that despite all files being identified with the same genre, iTunes groups some genres in two separate folders. Thus, I have two "Country" folders, for example. More perplexing is that iTunes groups my largest genre folder, "Jazz", in a single folder.

How to get pictures organised the same way on the iPad as they are on the PC?

When syncing pictures from my PC to my iPad the same albums are shown on my iPad as on my PC, but the pictures seems to be organised in random order within the albums, i.e. they are not organised the same way as on my PC. I've named all pictures on my PC and organised them based on name. Does anyone know how I can get iTunes/the iPad to sync the pictures in the same order?
Best regards,
Cecilie

Are you syncing the photos by selecting folders or by selecting a photo app that you have on your computer ? If you are syncing folders then they will be sorted by their 'date modified' fields (I assume that still applies on iOS 8), not by their filenames - so you will need to amend their 'modified' fields to be in the order that you want them to show in.
Or there are third-party photo management apps such as Photo Manager Pro (help pages) - you can copy photos to/from that app and your computer, and you can change the sort order of albums within the app.

How to attach Pacakge for Local made SAP Script

Hi,
I have created a SAP Script, initially I have made it as local without assigning any package, ow I want to attach one package for that SAP Script form to transfer it to quality and production but in chnage mode the package filed is disable.
Also other option is there to copy existing form to new and give the package name but i want to know insted of copy how to add package for existing form.
regards,
zafar

Goto SE03>object directory>change object directory entries> enter FORM in the first text box and script name in the object name select checkbox and execute.....>select the form and press button change object directory above....

How to get Tables for the datasource

Hi ,
When i have a datasource,How do i get to know..What are the table for that data source.
Thanks,
Kiran.

Hi,
In ECC:
1. goto RSO2 and give datasource name and display, if it is SAP defined datasource it will display some warning message in Status bar, so again press Enter Button and then see teh datasource there you can fine FM, Table/VIiew, InfoSet like that, in this way you can fine, if it is build on Function Module then you need to see that FM and debug and find. For LO dataSources you can fine in LBWE.
https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
Thanks
Reddy

Two spool getting generated for a single SAP script

Hi ABAPers,
I have a SAPscript development. This is a PO form for India. When I do a "Trial printout" in ME9K I see that two spools are generated. This is my first problem as till last week only one spool was getting generated. Only spool should be generated.
My second problem is that, the second spool which is generated has texts shown in some different language than English (my form only exists in language EN which is the orginal one too). When I debugged this whole thing, on the second run of the debugger (i.e. when the second spool is generated), when the control goes to a text in one of the windows, that text is shown in some other language (in debug mode also). Please note that the standard text is a Global standard text and it exists in around 6 languages.
I guess if only one spool is generated then my second problem would be solved. But then why are 2 spools generated in the first place?
If anyone has came across similar kind of problem please help. Thanks in advance.
regards,
Prakhar

Hi,
Check this..
1. Go to txn. NACE... select application "EF"... then click on "Condition Records" button
2. Select your Output Types...(ex. NEU)....
3. Go to Change condtion Record Screen. Select ur condtion then click on "communication" button..
4. Under Print Output Check the field "Number of Message" if it is 2 then delete it.
Regards
GK.

How to get shorttext for the field

Hi everyone,
My question is
The first column is auart(order type) from aufk(order master data)
01     Internal Order (Controlling)
02     Accrual Calculation Order (Controlling)
03     Model Order (Controlling)
04     CO Production Order
When I am printing values of field auart, I am getting 01 printed for Internal order and 02 for Accrual Calculation Order and so on.
How can I print the text Internal order .

Hi venkata,
I'm afraid you are talking about field AUFK-AUTYP (order category) (instead of AUFK-AUART).
That's easy! Just access table DD07T for domname = 'AUFTYP' and ddlanguage = 'EN'. And domvalue_l = (order_category). Then you'll have the description into dd07t-ddtext.
I hope it helps. Best regards,
Alvaro

How to get updates for the ThinkCentre 58P shown below?

I cannot seem to post pictures from a screen shot; so I have type it in below:
From a programs called Driver Detective which if I want to have solve cost me $40!
Your Driver Problems
IDE ATA/ATAPI controllers (Out of date: 1)
   Standard AHCI 1.0 Serial ATA Controller
System devices (Out of date: 4)
(2) Intel(R) 4 Series Chipset PCI Express Root Port - 2E11
     Intel(R) ICH10 Family SMBus Controller - 3A60
     Intel(R) ICH10 Family SMBus Controller - 3A14
Universal Serial Bus controllers (Out of date: 8)
(8) Intel(R) ICH10 Family USB Enhanced Host Controller - 3A6A
Here is my machine: MT-M.7483-XB4
Serial number is: MJ02768
I would like to have links so I can update the above:
I have installed: Lenovo Device Experience - Updates and Drivers and Lenovo ThinkVantage Tools. Nothing happens no finding of these items and you cannot pick on the Lenvovo support website in the search and drill down under machine type; you do not get these topics.   At least I cannot locate them.
Any help would save me $40 and hopefully I can get it from Lenovo technical support! I have done the result of the items from Intel tecnical support. But I don't know what Intel consider this motherboard or I could do the rest of the items from Intel too. There is a list of generic motherboards and I don't have a clue as to which one is the right one!
Please help me! Spend about 8 hours working on this list from 20 plus items now to only five left!
Solved!
Go to Solution.

Forgot to mention that when I run System Update 5: if come up with Password Manger as the optional update only.
When I go and do the Support - Drivers & Download for Chipset it come up with this shown below:
            Chipset
Intel Active Management Technology driver for Windows 7 (32-bit and 64-bit), Vista (32-bit and 64-bi...
Not sure what that is I am updating? Is it the Intel Management Engine Interface?
Oh I skip a couple of item in the list too and one of them is shown below:
Universal Serial Bus Controller
Lost totally! Help me please!

How to get password for the Sql server 2008 r2

Always when a user forgets a SA password , Blogs suggest to get into the server through windows Authentication having SysAdmin , and change the password for user SA.
Sir,
Is there any other methods to retrieve or see the password what we assigned before.
Example: If SA Password is assigned as Test
I have to get Test
, Instead of changing password.
Thanks in Advance.

Hello,
Dont you think it would create a Havoc if one could specifically see other admins password.Apply Gumption, you wont use SQL server if that feature is there.You cannot obtain password for other users.
If user forgets it change it ,there is no restriction on changing.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

How to get name of the slicer via script

Hi Gurus,
I was wondering if we could get the name of the slicer added in IR Query section, via script ??
That is, I have a bqy connecting to Essbase OLAP.
Now I am adding a slicer in OLAP Section via script.
For Ex : ActiveDocument.Sections["Query2"].Slicers.Add('Market.Gen3,Market' , 'Market.LA')
Now,for some reason, I wanted to retrieve the name of the slicer I added and assign it to a variable. Is this possible ?? I couldn't see any option for this. Please help me out if any one has done this before ?
Thank You,
Aji

Sethil,
Use your date(let us say Date1) instead of sy-datum.
CALL FUNCTION 'MONTH_NAMES_GET'
EXPORTING
LANGUAGE = SY-LANGU
IMPORTING
RETURN_CODE =
TABLES
MONTH_NAMES = itab_month
EXCEPTIONS
MONTH_NAMES_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE itab_month
WITH KEY MNR = date1+4(2).
itab_month-LTX will contain the value you are looking for
Good luck
Raghava

How to get rid of the Fetch Art Script from iTunes

A couple months ago I installed Fetchart, didn't like it and uninstalled using app zapper. App is gone but I still get this "S" looking script logo when I open iTunes. If I click on it, it says Fetchart. I tried going to library/iTunes and finding the "scripts" folder but it's not there.
I really want to get rid of this

Anybody?

How to get 2 spools for the same SAP script

Similar Messages

Maybe you are looking for