How to get 2nd line in smartforms using template

how to get 2nd line in smartforms main window using template. i have also defined loop .

if possible can you try with the TABLES..
Put one TABLE in your MAIN window
create table lines as per your requirment...consider all lines like 6 for header, 1 for main, 1 for total
Now, you will find three section under the tables: header, main, footer...
in header section, create a table line, assign one of the proper lines from the line types.. repeat for your all lines.
in main section, you can access your data form the loop.
the footer secion will be called, just after the main will be finished.
Regards,
Naimesh Patel

Similar Messages

How to get the line in the template (smartform) with out using under score

Hi,
 How to get the line in the template (smartform) with out using under score,
 and how to print the box (line the check box - small squre box (which is used ot mark the tick by the user in front of the item).
 Please provide the valueble answer as early as possible.
Thanks,
Ravi

Hi Ravi,
Line -
Use a SMATSTYLE for this purpose.in the smartstyle create a paragraph or character with underline atribute.Then call the smartstyle in the text.
Search SDN with Key UNDERSCORE.. will get few more posts on the same.
For Checkbox - refer link
Re: Quick Question on Smartforms
Re: putting tick mark into check box in smartform
Reward points if this Helps.
Manish
Message was edited by:
 Manish Kumar

How to print horizantal lines in smartforms?

hi friends,
how to print horizantal lines in smartforms.
waiting for ur valuble replies.
Thanks,
Kiran

HI,
If u use templates or table,then use borders to print the horizontal lines.
Eg : Create template-->Table painter->click select pattern button->Display framed pattern->select 3rd one.it will display only horizantal lines.
if want to print horizantal line under the text, then create one paragraph or character formate with Underline in smartstyles.Use that paragraph or character to u r text element

How to get Employee Picture in Smartforms

Hi Experts
Please help me out in getting employee picture in Smartforms
I have used the following FMs
1. HR_IMAGE_EXISTS
2. SCMS_DOC_URL_READ
By using these two FM i got the URL and i am able to get the picture in my Report Program,by using FM 'ISM_URL_SHOW'.
But Please tell how to get this picture in Smartform .
As i am generating Employee Biodata and in that i need employee Picture.
Please HELP me ....
Thanks & Regards
Shaveta Prabhakar

Hi,
     U need pictures in smartforms for that just try this one I think so it will help full to u.
      First Upload that picture in the se78 that photo must be in the bitmapformat(picture.bmp).
steps are:
         goto se78>graphics->import--->it asks the file path here,fill those details
Then goto Smartform--->In which page u want to put the picture,
          there click that page and goto Background picture,
         here give the name of that picture and select the resolution and positin of the picture there.
           Then u will get the picture in the output.
Regards,
Surya

How to protect the lines in smartforms

hi gurus
i want to know how to protect the line in smartforms..
regards
baskar

Check this link.
http://www.saptechies.com/smartforms-protect-lines-in-main-window/
if you are using tables, there are two options for protection against line break: You can protect a line type against page break. You can protect several table lines against page break for output in the main area.
Protection against page break for line types Double-click on your table node and choose the Table tab page. Switch to the detail view by choosing the Details pushbutton. Set the Protection against page break checkbox in the table for the relevant line type. Table lines that use this line type are output on one page.
Protection against page break for several table lines Expand the main area of your table node in the navigation tree. Insert a file node for the table lines to be protected in the main area. If you have already created table lines in the main area, you can put the lines that you want to protect again page break under the file using Drag&Drop. Otherwise, create the table lines as subnodes of the file. Choose the Output Options tab page of the file node and set the Page Protection option. All table lines that are in the file with the Page Protection option set are output on one page
Regards,
Maha

I plan on buying a new I Pad wit wifi and cell from Apple. But I don't want to select a cell carrier right now. Q 1: Do I have to select a carrier at purchase? and Q 2, In the meantime will I be able to get on line at home using my Cox Internet wi fi co

I plan on buying a new I Pad wit wifi and cell from Apple. But I don't want to select a cell carrier right now. Q 1: Do I have to select a carrier at purchase? and Q 2, In the meantime will I be able to get on line at home using my Cox Internet wi fi? Thanks.

Thanks for the help. Now I can feel comfortable in not having to sign up for cellular when I buy, esp. Since I'll be using my new IPad mostly at home on my Cox wi fi. Then I can see, in using the i pad, how often I'd actually use the cellular, and where. This can help decide which type of cell plan I get. Small problem it may seem, but a very helpful answer. Thanks.

How to get trending line in the graph

Hi,
I am using 10g. I have requirement as the following :
Name Date Metric
I can have bar graph against Date and Metric. My requirement is to have a trending line, so I calculated slope and regression line y=mx+c but I am not getting the right trend line. I can use regr_slope function to create a view in rpd but it doesnt support date values. Can you guys let me know how to get trending line like same in Excel.
Thanks

Hi,
It's better to do at UI level.
Can you please check the below link:
http://kpipartners.blogspot.in/2009/04/linear-regression.html
Hope this helps.
Thanks,
Pramod.

Hi..how we enter standard text for smartform using include text

hi
guru
..how we enter standard text for smartform using include text..
i know only using so10 we write text..
in smartform it asking text-object
text-id,
so what values we should give to get text

Hi,
Do u want to print Standard Text or the Texts that are maintained at the Transaction level.
If it is standard text , then u use text id as ST or if it is Texts that are maintained at the Transaction level then u have to go to that specific transaction and check for that text , then go to text editor ,in the goto menu u have header data where u get the Text id , text name.... , use them in ur smartform in the INCLUDE text.
Further u have the option of text modules in smartforms which act as standard texts, so if u r going for creation of standard texts then its better to use text modules.
Regards,
Shafivullah Mohammad

How to get file line count.

Hey guys,
How to get file line count very fast? I am using BufferedReader to readLine() and count. But when dealing with big file, say several GB size, this process will be very time consuming.
Is there any other methods?
Thanks in advace!

What I'd do is you create an infofetcher, register a listener, implement gotMore() and have that scan for '\n'
Some might suggest getting rid of the listener/sender pattern or use multiple threads to make ii faster. This might help a little, but only if your I/O is super-duper speedy.
you are welcome to use and modify this code, but please don't change the package or take credit for it as your own work.
InfoFetcher.java
============
package tjacobs.io;
import java.io.IOException;
import java.io.InputStream;
import java.util.ArrayList;
import java.util.Iterator;
* InfoFetcher is a generic way to read data from an input stream (file, socket, etc)
* InfoFetcher can be set up with a thread so that it reads from an input stream
* and report to registered listeners as it gets
* more information. This vastly simplifies the process of always re-writing
* the same code for reading from an input stream.
* 
* I use this all over
 public class InfoFetcher implements Runnable {
 public byte[] buf;
 public InputStream in;
 public int waitTime;
 private ArrayList mListeners;
 public int got = 0;
 protected boolean mClearBufferFlag = false;
 public InfoFetcher(InputStream in, byte[] buf, int waitTime) {
 this.buf = buf;
 this.in = in;
 this.waitTime = waitTime;
 public void addInputStreamListener(InputStreamListener fll) {
 if (mListeners == null) {
 mListeners = new ArrayList(2);
 if (!mListeners.contains(fll)) {
 mListeners.add(fll);
 public void removeInputStreamListener(InputStreamListener fll) {
 if (mListeners == null) {
 return;
 mListeners.remove(fll);
 public byte[] readCompletely() {
 run();
 return buf;
 public int got() {
 return got;
 public void run() {
 if (waitTime > 0) {
 TimeOut to = new TimeOut(waitTime);
 Thread t = new Thread(to);
 t.start();
 int b;
 try {
 while ((b = in.read()) != -1) {
 if (got + 1 > buf.length) {
 buf = IOUtils.expandBuf(buf);
 int start = got;
 buf[got++] = (byte) b;
 int available = in.available();
 //System.out.println("got = " + got + " available = " + available + " buf.length = " + buf.length);
 if (got + available > buf.length) {
 buf = IOUtils.expandBuf(buf, Math.max(got + available, buf.length * 2));
 got += in.read(buf, got, available);
 signalListeners(false, start);
 if (mClearBufferFlag) {
 mClearBufferFlag = false;
 got = 0;
 } catch (IOException iox) {
 throw new PartialReadException(got, buf.length);
 } finally {
 buf = IOUtils.trimBuf(buf, got);
 signalListeners(true);
 private void setClearBufferFlag(boolean status) {
 mClearBufferFlag = status;
 public void clearBuffer() {
 setClearBufferFlag(true);
 private void signalListeners(boolean over) {
 signalListeners (over, 0);
 private void signalListeners(boolean over, int start) {
 if (mListeners != null) {
 Iterator i = mListeners.iterator();
 InputStreamEvent ev = new InputStreamEvent(got, buf, start);
 //System.out.println("got: " + got + " buf = " + new String(buf, 0, 20));
 while (i.hasNext()) {
 InputStreamListener fll = (InputStreamListener) i.next();
 if (over) {
 fll.gotAll(ev);
 } else {
 fll.gotMore(ev);
InputStreamListener.java
====================
package tjacobs.io;
 public interface InputStreamListener {
 * the new data retrieved is in the byte array from start to totalBytesRetrieved in the buffer
 public void gotMore(InputStreamEvent ev);
 * reading has finished. The entire contents read from the stream in
 * in the buffer
 public void gotAll(InputStreamEvent ev);
InputStreamEvent
===============
package tjacobs.io;
* The InputStreamEvent fired from the InfoFetcher
* the new data retrieved is from start to totalBytesRetrieved in the buffer
public class InputStreamEvent {
 public int totalBytesRetrieved;
 public int start;
 public byte buffer[];
 public InputStreamEvent (int bytes, byte buf[]) {
 this(bytes, buf, 0);
 public InputStreamEvent (int bytes, byte buf[], int start) {
 totalBytesRetrieved = bytes;
 buffer = buf;
 this.start = start;
 public int getBytesRetrieved() {
 return totalBytesRetrieved;
 public int getStart() {
 return start;
 public byte[] getBytes() {
 return buffer;
ParialReadException
=================
package tjacobs.io;
public class PartialReadException extends RuntimeException {
 public PartialReadException(int got, int total) {
 super("Got " + got + " of " + total + " bytes");
}

How to get standard program ,script,smartforms all from sap

hi friends
how to get standard program ,script,smartforms all from sap.
thanks&regards
Babasish

Hi,
reports:
goto se38
all programs not starting with y or z will be sap std programs only
same for se71 scripts
samse for smartforms
but the use of those will be known when you see the documentation
for each programme
for std programs there will be documentation available so that you can understand
why they have developed that object
thanks & regards,
Venkatesh

How to get resultset from oracle procedure use ejb3

how to get resultset from oracle procedure use ejb3
i know oracle procedure should like this
Create or replace PROCEDURE resultset_test(
aaa IN NUMBER,
bbb OUT sys_refcursor) ....
but what s the ejb3 scripts looks like? please give me an example or link~
ths

- there are no EJB3 scripts, only compiled application code
- the part of the EJB spec that deals with databases is called the Java Persistence API, but likely you are just looking for the JDBC API.
Now you should know what to Google to get your "example script": "java jdbc oracle procedure"

How to get inputtext's inputvalue by using javascript

how to get inputtext's inputvalue by using javascript?
and how to judge whether its be filled or empty string

Why do you want to use javascript..? Why not action listener..? You can check whether its an empty string by checking
if(str != null && !str.equals("")) {..}
where str is the variable for inputText value.
If this is not helpful, do provide more details on which version of JDev you are using and what are you trying (your usecase).
regards,
~Krithika

How to get Default Activity(Infotype 0315) using BAPI

Hi Everyone,
I have a task to get Default Activity by Personal number for my third party application. Unfortunately function HR_READ_INFOTYPE is not allowed for Remote Call.
Is there any simple way how to get this value from system using BAPI? E.e. using RFC_READ_TABLE function(but i don't know table name ).
Thanks,
Roman.

Table -> PA0315 Field ->LSTAR (Activity Type)
Class :CL_HRPT_INFOTYPE_0315
You can also use FM "CATS_GET_INFOTYPE_0315" RFC Enable
Good luck !
~Saquib

When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back. I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor. How do I stop this?

When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back. I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor. How do I stop this?

Does Firefox switch to full screen if you press F11 ?
You can also try the F10 key to see if that brings up the menu bar.
* If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/")

How 2 create coloumns and rows in smartforms using template????

How to create coloumns and rows in smartforms using template????...
Kindly explain in details.......
Regards,
Faiz
Moderator message: please search for available information.
Edited by: Thomas Zloch on Mar 5, 2012

Hi JV,
Yes you can create rows dynamically in a table in IF. You can follow the instruction in [this link|Re: Dynamic Table - same data repeating in all rows] to create the dynamic table.
Also refer to these links:
[Data in dynamic table not pass to webdynpro java|https://forums.sdn.sap.com/click.jspa?searchID=16436680&messageID=5638776]
[DYNAMIC TABLE IN WEBDYNPRO INTERACTIVE FORM|https://forums.sdn.sap.com/click.jspa?searchID=16436680&messageID=5775811]
Hope this helps!!
Regards,
Arafat

How to get 2nd line in smartforms using template

Similar Messages

Maybe you are looking for