How to get a 74 min. audio into 700 megs?

I'm setting up a piece to market through outfits like CreateSpace. It is a 74 minute piece of music designed to put people to sleep. It seems to work well at 74 minutes, hundreds have tried it over the years, and swear by ... so I'm going to try and market it. And I don't feel like cutting it down to the 66 minutes that will fit into 700 megs. I'm worried that whatever is working in it, may not work as a shorter piece.
CreateSpace says they can handle a 78 minute piece of music, but the megawattage limit is 700 megs.
If I put the 74 minutes out as an AIFF 44k/16bit it comes to 783 megs. I've asked CreateSpace how they get 74 minutes into a 700 meg file when they request that it be an AIFF/44k/16bit. I haven't heard back from them.
I'm wondering if any Logic pros out there would have an idea, if and how this might be accomplished (without sacrificing too much quality of course).
All ears,
Ben

A little reading of the manual. A bit of poking around. I'm now burning a Red Book Audio. We'll see if it ends up fitting onto ... mmmm .... looks like it is working.
Okay, just burned a CD using the CDDA of Logic. Odd. The title Logic (or iTunes?) has assigned to the CD is 'MP3's Up Your ***". The title of the actual file is '1 MP3.aiff'. Neither of which have anything to do with what I burned.
I'm pulling the .AIFF file off the CD disk onto my desktop and it is telling me the file is 782.1 MB, which is 82.1 MB more than CreateSpace says it will allow.
So I get that it will now burn to a CD. Cool. So I guess I have to get onto CreateSpace and find out whether they can accept it or not.
Much obliged for your help Jazzmaniac,
Ben

Similar Messages

I have an old ipod and want to know how to get everything off it and into my iTunes library. My old computer died and the original library was lost, so don't have any of the content saved anywhere else.

I have an old ipod (it's the very thin oblong one in purple, the one before the one that does video) and want to know how to get everything off it and into my iTunes library. My old computer died and the original library was lost, so don't have any of the content saved anywhere else. I now have an iPhone 5S and listen to music on that, so want to be able to listen to things from the old ipod too.
Can anyone help please?
Thanks very much
Jane

Apple normally does not get involved in handling lost objects like this. Since a real name is not installed it will be much more difficult.
You can try contacting Apple support at the US number, assume you are US going to BWI from the listing: http://support.apple.com/kb/HE57 and explain the situation and see if they offer any suggestions.

How to get input from keyboard scanner into an array

This is probably a very basic question but I'm very new to java..
My task is to reverse a string of five digits which have been entered using keyboard scanner.
E.g. - Entered number - 45896
Output - 69854
I used the StringBuffer(inputString).reverse() command for this, but i need a more basic method to do this.
I thought of defining an array of 5
int[] array = new int [5];
and then using,
Scanner scan = new Scanner(System.in);
to enter the numbers. But I can't figure out how to get the five input numbers into the array.
If I can do this I can print the array in reverse order to get my result.
Any other simple method is also welcome.

Hey thanks for the quick reply,
But how can I assign the whole five digit number into the array at once without asking to enter numbers separately?
E.g. - if entered number is 65789
Assign digits into positions,
anArray [0] = 6;
anArray [1] = 5;
anArray [2] = 7;
anArray [3] = 8;
anArray [4] = 9;
I'm really sorry but I am very new to the whole subject.

How to get the plsql table data into output cursor

Hi,
Could anybody please help me.
Below is an example of the scenario..
CREATE OR REPLACE PACKAGE chck IS
PROCEDURE getdata(dept_no IN VARCHAR2,oc_result_cursor OUT sys_REFCURSOR);
TYPE get_rec is record (ename varchar2(20),
eno number(12));
TYPE t_recs IS TABLE OF get_rec INDEX BY BINARY_INTEGER;
emp_tab t_recs;
END chck;
CREATE OR REPLACE PACKAGE BODY chck AS
PROCEDURE getdata(dept_no IN VARCHAR2,oc_result_cursor OUT sys_REFCURSOR)
is
BEGIN
select ename, eno
bulk collect into emp_tab
from emp;
open oc_result_cursor for select * from table(emp_tab); -- I believe something is wrong here ....
END;
END chck;
the above package is giving me an error:
LINE/COL ERROR
10/29 PL/SQL: SQL Statement ignored
10/43 PL/SQL: ORA-22905: cannot access rows from a non-nested table
item
let me know what needs to be changed
Thanks
Manju

manjukn wrote:
once i get the data into a plsql table, how to get this plsql table data into the cursor?There is no such thing as a PL/SQL table - it is an array.
It is nothing at all like a table. It cannot be indexed, partitioned, cluster, etc. It does not exist in the SQL engine as an object that can be referenced. It resides in expensive PGA memory and needs to be copied (lock, stock and barrel) to the SQL engine as a bind variable.
It is an extremely primitive structure - and should never be confused as being just like a table.
Its use in SQL statements is also an exception to the rule. Sound and valid technical reasons need to justify why one want to push a PL/SQL array to the SQL engine to run SELECT 's against it.

How to get max and min salary in a table

How to get max and min salary in a table

SQL> select max(sal),min(sal) from emp;
MAX(SAL) MIN(SAL)
5512 800
SQL>

How to get System status Check Boxes into Query selection screen

Dear experts,
Pleas help in knowing how to get System status Check Boxes into quick view query (SQVI), selectionscreen.
Regards
Jogeswara Rao
Edited by: K Jogeswara Rao on Jul 6, 2010 7:26 PM

Problem solved through other Forum
(Checkboxes not possible, some alternative solution to my requirement found)

How to get BW-BPS variable value into Visual Basic?

Hello,
Scenario:
Time characteristic 0FISCYEAR has a variable ZVFYEAR. In layout this time characteristic is defined as DATA COLUMN. When user changes VFYEAR variables value i want to get the value of variable into Visual Basic and to format header for table in the layout.
How to get BW-BPS variable value into Visual Basic?
Could you help me?
Thanks in advance.
Best Regards,
Arunas Stonys

Hi,
If i understand your requirments correctly ,you need to read the value of the Variable and Put it on the layout. Here is how i would solve this,
Read the value of the variable using an ABAP program.The logic for this would be to read the variable value and post it on the layout on a cell.You can do this by calling the ABAP program on opening the layout.this can be done using LB_EXIT_FM T-code. Now using the SAP delivered SAPAfterDataPut macro, read the cell in which you have placed the variable values and assign it to the necessary values you want to on the layout.All this will be done before the layout opens.
Hope this helps.
regards
Sai Vishnubhatla

How i get some informations about audio file?

Hi to all,
i would like to know how i get some informations about audio file, such as its artist, bitrate, file type, duration, ecc...
Any help me?

Ok, but which are the docs of audio format?Again, what does that have to do with Java?
Where i can found these documents?Again, what does that have to do with Java?
Thank you...For nothing.
db

How to get a hyperlink in ID into email?

In ID CS4 running Tiger on a G5 Mac, I have a doc which we can call, TestLinkFile.
I select a line of type in TestLinkFile, and using Type > Hyperlink & Cross-References > New Hyperlink, I create a hyperlink. It does not function as such until I export it as a PDF which is now TestLinkFile.pdf. The hyperlink I had made in ID does work properly in the PDF.
So far so good.
Then I attach that TestLinkFile.pdf, using either Mail or Entourage (which is my normal email app). I attach it using either the proper method in each program, or even by dragging the file in. BUT: Now the hyperlink is dead, dormant. If for a further test I email TestLinkFile.pdf to myself in an email, from either Mail or entourage, the dead link remains dead.
I realize we're nolonger in ID and this is the ID forum but it remains the best place to ask I think. So how do I get that hyperlink from ID into an email, preferably as a PDF TestLinkFile.pdf which anyone can open?
Thank you.

> Did youexport a PDF, then attach that PDF to an email, then open the PDF in a program and then find the hyperlink does not work>?
I neveractually checked the pdf itself. I checked its image in the email. Reason being I wanted/want to avoid a reader having to take the extra step of opening the pdf. For one, it takes time. For another, not everyone knows how to do that. And for finally, some are afraid of attachments as carriers of viruses and won't open the attachment.
The link line, blue and underlined in the email I sent myself, was dead.
As I write this I am sending a new email to myself and here is the result of opening the pdf attachment: The link in the attachment does work properly.
But my goal was to make the link in the IMAGE of the pdf attachment live. I get many emails with all kinds of junk in them and they have images which, when you click on them, act as a link to go elsewhere. That is what I want to do. I want to just have someone click on the link in the pdf and go to the destination. I do NOT want them to HAVE TO open the pdf. If everyone else can do it, I ought to be able to???
Hope this was a bit clearer. Thanks again Scott.

URGENT: how to get the database error message into application?

Hi, pls give some idea:
For example, the database is MS Access. When insertion failed, the getMessage() method of SQLException will print "General error", while the log file created by ODBC will be "[MICROSOFT][ODBC DRIVER]column ID no found in student table"(...just a example).
So, how to get this message in our application?

instead of using the getMessage method, have you tried something like this:
         try {
         } catch (Throwable t1) {
            System.out.println(t1.toString());
         }If that still doesn't work, you can always redirect the log entries into a textarea but then everything that appears in the log file will be redirected!
;o)
V.V.

How to get data from MS CRM into Crystal Reports

Hello All,
Can anybody tell me how to get data into crystal XI reports with MS CRM.
Thanks in Advance
Ramesh

First you should refer to the Rules of Engagement and then add more info.
Start off by telling us what version of CR are you using and what is MS CRM?
Thank you
Don

How to get color group from illustrator into flash

Hi,
I have difficulties with the color management between Illustrator and Flash.
I have the original vector files in Illustrator and would like to use the color groups, I have in Illustrator, also in Flash.
One way doing it is using the Kuler.
But I can not get the colors from Illustrator into Kuler.
Can someone advice how to manage that process?
Many thanks in advance!

I'm fairly new to this having only recently started using these tools again after six years, but will try to help! Go to "Explore", find a theme you like and click the "Edit" selection when you mouse over it. From there you can edit it or save a copy of it as is as whatever name you wish. In Photoshop or Illustrator, they will now show up in Adobe Color Themes (Window > Extensions > Adobe Color Themes) under "All Themes" in the drop menu. In these apps (and others that are Adobe Color Theme aware), any themes that you favorite on the site will show up under "My Favorites".
If you're using Fireworks, it's different as it still uses Kuler (Window > Extensions > Kuler). Themes you save or favorite on the site don't automatically show up there, however you can search for themes by name, and if you select "Custom" from the theme group dropdown, you can enter up to four names that will show up in that dropdown menu and produce as many results as the window can hold for an individual term. For instance, I saved a theme as "Copy of Industrial Calm" which if I enter in the search box, the "group" is a group of one. However, if I just type "Industrial", the window fills with options, yet there are MANY more results on the Adobe Color site and you would have to be specific to get the right one in that window.
Hope that helps.

OMB Plus : how to get all the generated messages into a text file ?

Hello,
I wrote an OMB TCL script and I would like to know how to get all the messages generated during the exécution into a text file.
I tried this, but it works only for a puts command :
set DesProjet ACT_1
set filename [ open "c:\\temp\\INFDE_010_IMPORT_REPOSITORY_$DesProjet.log" w]
puts "test"
Thank you for your help

Hello Alain, you should try the OMBLOG variable. If you set it inside OMBPlus:
set OMBLOG c:/temp/mylog.txtthen all the OWB specific commands are logged with their output. By OWB specific I mean all those that start with OMB.
This is more than what you see in the interface, because:
- messages inside procedures are logged; you wouldn't see them on std.output when you call a proc
- variables are resolved, so if you issue the command
set my_var VERY_IMPORTANT_TABLE
OMBDROP TABLE '$v_myvar'the log will show:
OMBDROP TABLE 'VERY_IMPORTANT_TABLE'
Table dropped
and you know something is wrong... so OMBLOG is very useful to intercept all manipulations on you repository.
If what you want instead is a dump of the screen output when you execute a script, I suggest you redirect standard output from the operating system command line. Unfortunately OMBPlus doesn't support all advanced redirection and tracing features of the TCL language.
Hope this helps, Antonio

How to get songs from iPod back into iTunes library?

My computer recently crashed and all my files were deleted, so now i have all my songs on my iPod but not on my iTunes, how can i put my songs back into my library without my whole iPod being erased?

Recover media from iPod
See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
tt2

HT5649 how to get the movie category back into the sidebar?

I deleted this category but now I want it back, anyone know how to get it back? I want it returned for itunes and for devices listed in the sidebar. Thanks

Perhaps you inadvertently hid it. Try iTunes preferences > General > Show Movies.

How to get a 74 min. audio into 700 megs?

Similar Messages

Maybe you are looking for