How to get a Crystal report as an iview in Portal

Hi,
Please let me know how to get a crystal report to Portal.
Regards,
Pradeep

Hi,
I used URL iview option to get the crystal report in portal and am able to view it. Thank you all for your inputs.
But as of now SSO is not configured between BOE and BI system, so when i click on URL iview initially it asks me for credentials to BOE InfoView and after entering that it again asks for BI login as the data has to be picked from BI server.
We are going to configure SSO mean while i just want to know whether it is possible to pass the id and passw as parameters to this url iview, if so what are the parameter id's i need to maintain to pass id and passw.
Let me know on this.
Regards,
Pradeep
Edited by: pradeep balam on Jul 29, 2011 8:34 AM

Similar Messages

  • How to get past Crystal Reports Server 2008 Linux install error

    Hi,
         During the install of Crystal Reports Server 2008 on Red Hat Linux we select use an existing DB (Oracle) and it prompts for:
    Crystal Reports Server 2008 Setup
    Enter the information for your new CMS
    Oracle TNSNAME :
    [SANDBOX                     ] *
    User ID :
    [crystal_rpt                 ] *
    Password :
    which then gives me:
    Crystal Reports Server 2008 Setup
    ERROR
    Failure to validate the database credential has a potential to crash the database at a later stage. Enter the correct information.
    It doesn't let me get past this and just send me back to the previous screen.  I've check and re-checked and the information TNSNAME, User ID, and Password are all correct.  Now I can exit out the install and sqlplus to the database just fine with all that same information.
    What does this error mean?  And how do I get past it?
    Thanks,
    ~Jet

    Hi Jet,
    I've go the same problem. Have you solved this problem?
    Regards,
    Aldo

  • How to get one crystal report to work with two different backends?

    We have a software that can work with either SQL2008 or Visual Fox Pro backend.  We are trying to compile One Crystal report that will work with either of the two backends.  How to you make sure that your Crystal Report is compiled so that it will work with both backends?
    Right now my reports were originally created using the SQL2008 backend and are retaining the DBO reference in the statement, which then will not allow the Crystal report to work with the VFP backend.

    You can write your data sets as a command using hand coded SQL. As long as "dbo" is the only schema used in your SQL Server database, you don't need to specify it in the SQL. SQL Server will automatically assume the dbo.
    The 2nd thing... The SQL needs to be 100% compatible with both SQL Server 2008 AND VFP.  This will limit the list available functions to those that are common to both platforms AND work exactly the same in both platforms.
    The other part is to make sure you are using an ODBC type connection instead of OLD/DB. That way all of the connection properties are set on the local machine and the report is simply looking for the System DSN name.
    HTH,
    Jason

  • How to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0

    Hi All,
    Can you please let me know how can migrated the crystal reports from BO XI 3.1 to SAP BO 4.1 and after migrate how to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0.
    can you please help on this and if document please share.
    Thanks,
    Rajesh

    Use the upgrade management tool to move from 3.1 reports to BO 4.1. After migration, open the report in crystal enterprise 4.0, you will get a message saying that the report will be converted to latest version, will not be able to view from older version after converting. (Similar words- not sure exact words).

  • How to Call a Crystal Report from Form 6i?

    Dear All,
    Can anybody tell me how to call a crystal report, designed using Crystal Report 9, in form 6i? I tried one solution by using the host command but it was not working properly. The code I was tried is like:
         f_name varchar2(240);
         f_name :='C:\Program Files\Crystal Decisions\Crystal Reports 9\crw32.exe D:\Form16\Form16_Rep\bin\Debug\Form_16_character_emp.rpt';
                   host(f_name);
    This open the crystal report in design view. So how we call a report which run automatically like in .Net. How to pass the connection info of the database schema?
    Thanks & Regards
    Sunil

    Hi
    First see the built in run_product function.
    You can create a parameter list, add the
    "MAXIMIZE" paramter in it and then call your
    report with run_product passing your parameter list in it.
    hence the called report will be maximized.
    null

  • How to get balance sheet report for profit centers

    hi
    how to get balance sheet report for profit centers, is there any transcation code to get that report or i need to create a report painter report for this

    Hi,
    You can use T. code KE5Z for actual line items.
    More to this you can use program RFBILA10 (Use T. code SE38 and program RFBILA10) for complete blance sheet.
    The transaction is for special purpose ledger but this program RFBILA10 can be used for profit center balance also.
    In selection, you can give ledger name which is generally 8A for profit center ledger.
    Reg

  • How to create a crystal Report using C# and SQL Server

    Hi, im new in creating crystal report using SQL Server, and im making a project.. and could someone help me how to connect your .sdf (SQL Server File) from the bin to your crystal report? thanks a lot.. i followed some instructions like this one (https://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?forum=csharpgeneral)
    but i got an error on the adding of server name and database portion.. thanks a lot in advance

    Hello,
    Crystal Reports are supported on
    http://scn.sap.com/community/crystal-reports.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • How to get the link report of a swf file to the set of clases

    He  But How to get the link Report of the SwF File

    Here are some links with additional information:
    http://stackoverflow.com/questions/185252/optimizing-flex-when-multiple-modules-are-used
    http://livedocs.adobe.com/flex/3/html/help.html?content=modular_4.html
    http://livedocs.adobe.com/flex/3/html/help.html?content=controls_15.html
    http://livedocs.adobe.com/flex/3/html/help.html?content=compilers_14.html
    If this post answers your question or helps, please mark it as such.

  • Urgent: How To Get Vendor History Report

    Hi Sap Techies,
    Please can Any one help me how To Get Vendor History Report and Which Transaction Code I have To use or Do i Need to write any Programs For that
    Moderator: Please, search before posting

    Dear,
    What type of history you want for Vendor, you want list of Vendor or you want transaction data for Vendor
    For Vendor transaction use FBL1N and for Vendor List you can use S_ALR_87012086
    Hope it helps!!
    Br,Vivek

  • How to publish a Crystal Report in Business One

    Hi
    Please can anyone tell me how I publish a Crystal report (which is now inbuilt in SAP B1) so it is available to all users?  I have full administrator/manager user rights. I have so far created the report and saved it to my SAP server machine on it's C:drive.
    Thank you very much for any help and info.
    Matt

    Hi, I worked out how to do it. I had to first enable the Crystal Add on from within SAP and then open the Crystal Reports Administration menu under Administration and then select "Manage Crystal Reports". From there you can browse to the report you have created and select the module for where you want it to appear under in SAP.
    Edited by: matth76 on Jun 25, 2009 4:14 PM

  • How to get DIVISION wise report in Controlling?

    Hi,
    How to get DIVISION wise report in Controlling? I am not trying to get Division in COPA report but i am not able to see Division Characteristic in Operating concern Data structure.
    Kindly help me - where can i get good Controlling report with Division wise? why i am not able to see the Division characteristic in COPA report?
    Thanks
    Kishore

    HI,
    Check this:
    KEA0 ->Data stucture (Display) ->Extras(Menu) -> Display fixed fields. In this pop-up you will see 'Division' (SPART).
    If this field is defined as Segment level characteristic (KEQ3), then you can build reports on this characteristic using KE35.
    Hope this helps.

  • How Can I call Crystal report from R3?

    Hi experts,
      How Can I call Crystal report from R3?

    Hi Bill,
    Can you please be specific and could you please provide the steps
    Thank you

  • How to get sms delivery report on iphone 6 ios 8.1

    How to get sms delivery report on iPhone 6 ios 8.1

    Not a feature of the iPhone. Ask your carrier if they support this, as it is a carrier feature.

  • How to Retrieve a Crystal Report's Unmanaged Destination Filename

    Hi all,
    I have looked very closely at Robert Twigg's response to the post "[Destination Path and name of a scheduled Report|http://forums.sdn.sap.com/thread.jspa?messageID=9588160#9588160]" dated 9/1/10 and while it does retrieve the unmanaged destination path, the filename retrieved is the managed filename.  How does one go about retrieving an instance's unmanaged filename?
    When I look at a Crystal Report instance details, it definitely knows what the unmanaged filename that was populated, here is a sample instance detail:
    External Destination: File copy the instance with the filename: "ALOG_Deferred_Clearing_RPT_2011-12-13-11-43-09.pdf" to the folder: "/apps/efs_bobj/IMPL/XX" .
    As you can clearly see, the filename consists of report name, date, and time that was specified as "%SI_NAME%_%SI_STARTTIME%.%EXT%" in the destination filename.
    Here's the snippet to retrieve the managed filename:
    IInfoObject report = (IInfoObject) reports.get(0);
    // Get the file name from the instance.
    IFiles files = (IFiles) report.getFiles();
    IFile file = (IFile) files.get(0);
    Any insight on how to retrieve an instance's unmanaged filename would be highly appreciated.
    Thanks in advance,
    Hart Penn
    Edited by: hartpenn on Dec 14, 2011 2:14 PM
    Edited by: hartpenn on Dec 14, 2011 2:15 PM
    Edited by: hartpenn on Dec 14, 2011 2:19 PM

    Thank you for your response.  I am querying for the report instances using the query below:
    IInfoObjects iRptObjects = infoStore.query("SELECT * FROM CI_INFOOBJECTS " +
                                               "Where SI_KIND='Pdf' AND " +
                                               "SI_INSTANCE>0 ");
    Collection<IInfoObject> iRptObjs = iRptObjects;
    for (IInfoObject iRptObj : iRptObjs) {
        ISchedulingInfo iSchedInfo = iRptObj.getSchedulingInfo();
        IEvents triggerEvents = iSchedInfo.getDependants();
        if (triggerEvents.size() > 0) {
            for (int j=0; j < triggerEvents.size(); j++) {
                IInfoObjects events = (IInfoObjects)infoStore.query("SELECT * FROM CI_SYSTEMOBJECTS " +
                                                                    "Where SI_KIND='Event' AND " +
                                                                    "SI_ID=" + (Integer) triggerEvents.get(j));
                if (events.size() > 0) {
                    IEvent curEvent = (IEvent)events.get(0);
        IDestinationPlugin destPlugin =
            (IDestinationPlugin) infoStore.query("Select Top 1* from CI_SYSTEMOBJECTS " +
                                                 "Where SI_NAME = 'CrystalEnterprise.DiskUnmanaged'").get(0);
        IDestinations dests = iSchedInfo.getDestinations();
        Collection<IDestination> destObjs = dests;
        if (dests.size() > 0) {
            // we have a dest set up
            for (IDestination destObj : destObjs) {
                if (destObj.getName().compareTo("CrystalEnterprise.DiskUnmanaged") == 0) {
                    // Copy the destination properties to the destination plugin.
                    destObj.copyToPlugin(destPlugin);
                    // Get the scheduling options for the unmanaged disk.
                    IDiskUnmanagedOptions diskUnmanagedOptions =
                        (IDiskUnmanagedOptions) destPlugin.getScheduleOptions();
                    // Get the destination files
                    List destFiles = diskUnmanagedOptions.getDestinationFiles();
                    String pathName = (String)destFiles.get(0);
        IFiles iFiles = (IFiles) iRptObj.getFiles();
        IFile myFile = (IFile) iFiles.get(0);
        logger.debug("Object: " + iRptObj.getTitle() +
                     ", ID: " + iRptObj.getID() +
                     ", Kind: " + iRptObj.getKind() +
                     ", Trigger Event: " + curEvent.getEventName());
        logger.debug("Dest: " + pathName);
        logger.debug("Filename: " + myFile.getName());
    while this is not efficient, it does retrieve the instances. However, the file name returned is not what was specified in the destination filename. Here is some info returned and displayed:
    Object: ALOG_Deferred_Clearing_RPT, ID: 128776, Kind: Pdf, Trigger Event: EVT_121311_114308
    Dest: /apps/efs_bobj/IMPL/XX/%SI_NAME%_%SI_STARTTIME%.%EXT%
    FileName: ~ce46086dd492ac788.pdf
    As you can see, the filename is clearly the managed filename.
    Edited by: hartpenn on Dec 14, 2011 3:43 PM
    Edited by: hartpenn on Dec 14, 2011 4:02 PM
    Edited by: hartpenn on Dec 14, 2011 4:03 PM
    Edited by: hartpenn on Dec 14, 2011 4:17 PM
    Edited by: hartpenn on Dec 14, 2011 4:26 PM
    Edited by: hartpenn on Dec 14, 2011 4:27 PM
    Edited by: hartpenn on Dec 14, 2011 4:28 PM

  • How to create a Crystal Report to connect to Oracle

    Hi,
    When I create a Crystal report to connect to SQL Server, I create a stored procedure to get all data I need and connect to it from Crystal Report.(In the stored procedure, I created temp tables, used cusor etc to run data.) But now I need to use a Oracle database. I heard I need to create a package and put this stored procedure in this package. Questions:
    1. if I need to create a package, how can I call the stored procedure from it?
    2. Can I create temp table in this procedure too? I need to create some temp tables to join together to get complex data.
    3. if I want the return data from stored procedure, do I still "select ... from ..." or there is another other ways?
    I am so desperated. Please help. I know this are very silly questions. But please.

    Hi Jenny,
    We are also using Crystal Reports for our Oracle Database, we normally just select the tables we want to use or create our own SQL query.
    However, if you really want to use Oracle stored-procedure (which performs faster than a SQL query because the stored procedure is compiled in advance), you can look at this document:
    http://support.businessobjects.com/communityCS/TechnicalPapers/scr_oracle_stored_procedures.pdf
    Hope this will answer your questions.

Maybe you are looking for

  • Activate Direct Posting to G/L Accounts and Material Accounts

    under configuration if we tick on "Activate Direct Posting to G/L Accounts and Material Accounts" then what would be the impact? Thanks & Regards Nitin Gupta

  • SFTP/FTP Proxy Problems - Works for DMZ but not for Internet Hosts?!

    Hi together, we have a strange problem with our TMG Proxy, some infrastructure informations first So we have the Client LAN with the IP range 192.168.11.x which is routeable to Server LAN 192.168.3.x but not to DMZ LAN 192.168.200.x.. The TMG is a 2

  • Tree's DragSource changes at DragDrop event handler?

    I try to drag a node A into node B. When the DragDrop event handler is called, the dragSource is changed to the drop source? I have declared the following: <mx:Tree ......... dragDrop="OnDragDrop(event)"....../> In the function: private function OnDr

  • How to pass DB link dynamically

    Hi, I need to pass DB link dynamically to SQL i.e, if I run in stage DB then I wanted to pass @DBSTAGE , if I run in prod DB then I wanted to pass @DBPROD to my report SQL. How can I achieve this? Thanks in advance for your help.

  • Macbook Pro 17 - Kernel Panic

    Hey there. About 4 months ago I bought an used Macbook Pro 17 2011. It's the latest model of the 17" on its top version. The problem is I've been having Kernel Panics frequently and can't find the source of the problem. Just got my machine from the s