How to get a driver for hp laser jet printer 1010 suitable for Win 8.1

I have a hp laserjet 1010 black & whilte printer which survived through Win XP,  Win Vista, Win 7, and now ready for Win 8.1, and it needs to work with a 64-bit hardware and 64-bit operating system.
HP made a robust product in LJ 1010 and I cannot throw it away for its quality till date.
How do I get a driver software for this printer?
Windows could not find it automatically, I couldn't find it at HP support site.
Can someone help?

The 1010 is not supported in Windows 8 by HP.
Link
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

  • How do I get the driver for an HP 1005 laser jet printer now that I have changed my operating system

    how do I get the driver for an HP 1005 laser jet printer now that I have changed my operating system

    Did you look on the HP website?
    Click the picture to go to the page.

  • My computer says I need a driver for my iPhone4s but I don't now how to get a driver plz help

    I need help my computer says I need a driver for my iPhone 4s but I don't know how to get a driver for my iPhone plz help

    Remove/delete itunes and reinstall it.

  • How do I find email address for my M1212nf MPF laser jet printer

    How do I find email address for my M1212nf MPF laser jet printer

    Hi,
    Same post:
      http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/M1212nf-MPF-laser-jet-printer-finding-...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Need driver for hp laser jet 4 plus with windows 7

    need driver for hp laser jet 4 plus with windows 7

    Hi,
    A friend of mine uses USB-Parallel cable, he was saying it's ok
    Good luck,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Need Driver For Hp Laser Jet 5L/6L for Window Xp, 7

    i have hp laser jet 5L and 6L pinrter and has xp and window 7 os. i have searched for drivers on google and found many but none of them working  for me. the porblem is when is send pirnt command to printer. the status is printing for 4,5 minutes then it prompts an error that "failed to print".
    Please guide me to the official drivers for hp laser jet 5L and 6L.

    Hi @Taqi_Shah 
    I suspect your question would be better answered in the HP Enterprise Business Community,  as the HP LaserJet 5L and 6L are commercial models.
    My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
    Click here to view the Printing and Digital Imaging.  When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
    You may find the following helpful while you awit to hear from somebody on the commercial boards; HP LaserJet - Driver and software support for Windows 7
    Best of luck.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • How to get iMessage to work when all it says is waiting for activation

    How to get iMessage to work when all it says is waiting for activation

    Hi Howell,
    Welcome to Apple Support Communities.
    This article on troubleshooting FaceTime activation has some steps you can try:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Have a great day,
    Jeremy

  • Fix for hp laser jet CM1312nfi MFP printer and OS X 10.10.2

     My HP CM1312nfi MFP laser jet printer, with the latest driver 1.5.0, will only print with my iMac OS X 10.10.2, I cannot scan at all, even with image capture the scanner does not work or show up. My wife's Mac Book is running 10.9.5 and printer driver 1.4.1, she can scan with hp scan but only with the flat bed scan not the tray feeder. I can't find a download for the older driver to try that.
    Very frustrating to have a perfectly good HP MFP printer that seems to no longer be supported by the manufacturer!!! The printer is working fine with the PCs in the house. 
    Does anyone have a fix for this? 

    Hi ShlomiL,
    Thank you for your answer.
    I'm aware of the download you pointed out, but my question was different.
    I asked why the new version provided to Apple from HP (and from Apple to the customers) won't work as intended anymore. Until few days ago, all I had to do was plugging in the USB cable and my Mac would install all the required software, without all the additional packages I would not like to have.
    I wanted to contact Apple but the software is made by HP, so I thought HP should know about compatibility issues. I know this is a community board but I wouldn't know how to get in touch with the Mac software makers.
    If the issue won't be risolved I might just try and install the package from this website, but that would not be a fix for a problem recently introduced and that I thought I'd point out.
    Thanks again,
    Mario

  • My HP 3015 laser jet printer is 220V. How can I run it on household 110V ?

    I got a brand new HP P3015 laser jet printer.  Because they are a fast printer, they pull a lot of power to keep the fusers happy.  In fact, the printer I got is a 220V model and it is not happy on just 110V household current.  How can I convert it to 110V?  Or, how can I feed it 220V worth of power at home?

    Hello @ReggieWagstaff ,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Where can I download an user guide for a HP laser jet printer p2055dn ?

    Where can I download an user guide for a HP laser jet printer p2055dn ?   [email protected] 
    This question was solved.
    View Solution.

    Hi,
    You may not be able to find the manual for it but this is the manual for the P2050 series:
      http://bizsupport1.austin.hp.com/bc/docs/support/S​upportManual/c01461642/c01461642.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP2420 Laser Jet printer only printing black pages

    I have an HP2420 laser jet printer that is only printing black pages.  I have tried 3 different toner cartridges so the cartridge is not the issue.  I saw that there are maintenance kits.  Could these help solve my problem and if so, how do I use them?
    Many thanks

    Okay, now where was the paper jam located? Was there any paper torn off when you cleared the jam? As I stated before, almost sounds like a voltage problem, might be one of the contacts might be having an issue. Also, since the machine is new, I would suggest contacting HP, the machine should still be under warranty, if it is in fact new, and see if they can either provide service for it or just replace it. That is of course if you do not get it resolved.

  • Laser Jet Printer P1007

    HI.
    I have installed Laser Jet Printer P1007, since about a month it is not accepting paper for printer.  First it accepts but subsequently stops and retry message comes though the paper is always full.  Please provide solution

    Welcome to the HP Forums paperunloading,
    I read your post, which indicates that the printer won't pull the paper in.
    I can help you with this.
    Make sure the paper tray isn't over filled.
    I have provided a document to go through the steps to see if that will resolve the issue.
    Attention Light Blinks on the Control Panel When a Paper Jam Occurs.
    If you need further assistance, just let me know.
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • MiniSAP - SE80 Prompts Error "Printer not suitable for job step..."

    Hi all,
    I bought an ABAP Objects book. I installed the MiniSAP. When I run SAP GUI and SE80, both with BCUSER and DDIC, it gives me error message "Printer not suitable for job step. Automatic printing not possible."
    If I double-click on the message, it does not show the description of the error message, instead it displays an Internet Explorer error message "The page cannot be found."
    Furthermore, the same error message, "The Page cannot be found", also appears in the area where the listbox and textbox for selecting Development Class, Program, Function Group, etc. Making these function becomes unavailabale. I cannot see the listbox and textbox in the Object Navigator. The only development class show is "$_TMP_BCUSER" (if I recall correctly). But nothing is in the development class.
    How do I solve this problem?
    OS: Windows XP Professional
    Browser Installed: Internet Explorer and Firefox
    Other info: I put incorrect IP Address in the Hosts file while installation was in progress. This created error. I then correct the IP Address in the Hosts file and resume installation. I still encountered error until I restarted my computer and resume installtion. I use IP Address 10.10.0.10.
    Thanks in advance.
    Regards,
    Goh Tiam Tjai

    I searched the solution in the other SDN sub forum (ABAP Programming). The following patch solves the problem.
    http://www.sap-press.de/download/dateien/473/sapgui_patch.zip
    Regards,
    Goh Tiam Tjai

  • I need to know how to get my driver for a hp photosmart c4440 to work on windows 8

    my hp photosmart c4440 did work on my windows 8 dell computer. i refreshed it and the computer won't accept the driver anymore. how can i get it started back up.

    Hi,
    Your printer is IN the following list:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03168175#N106460
    Please go to the first screen of the above link to download a tool and run on your Windows 8 machine. It will find the roght drivers and install for you.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to Get Spool ID after PO release. (To send PDF for ext E-mail)

    Hi Experts,
    I am new to Email sending from SAP.
    I am facing a big problem from many days. I am in a new support project.
    I have a issue that when ever a PO is released from ME23N or ME28 it should send a mail to vendor.
    This is working fine in Development including delivery report or failed report back to approver...
    I dont know where is PRD and who is doing that,
    But my support manager says that only some PO's are sent to vendors not all...
    everytime they approve only some emails sent to vendors...!
    But every PO is same and for same vendor's...
    Even failure & delivery messages are missing for (sent failed email's)
    But after all I observed only one thing that we have a select statement....
      DATA:  GS_RESULT TYPE ITCPP.  
      DATA : L_DATE(9).
      DATA : BEGIN OF LT_TSP01 OCCURS 0,
              RQIDENT LIKE TSP01-RQIDENT,
              RQCRETIME  LIKE TSP01-RQCRETIME,
              DATE(8),
              TIME(8) TYPE N,
              END OF LT_TSP01.
      SELECT  RQIDENT RQCRETIME  FROM TSP01 INTO CORRESPONDING FIELDS OF
                           TABLE  LT_TSP01  WHERE RQCRETIME LIKE L_DATE
                                            AND   RQIDENT EQ GS_RESULT-TDSPOOLID.
      IF SY-SUBRC =  0.
    (All Email sending code)(including delivery & failure delivery)
    Endif.
    So I suspect it is not picking up the Spool request from this Table TSP01 or may be not updated to this table.
    I have searched in SCN, I have seen may E-mail Codings
    But every one says to get Spool- ID & Convert to PDF,,,
    My Question is How to get Spool ID correctly and tell me how it is updated. when a PO released by ME23N or ME28.
    please any one clear my doubt as I am completely helpless here.
    Thanks in advance,
    Dunlop.

    Hi,
      Is it a SMart form.....
    If it is a smartform, then Smartfom interface itself has a spool id parameter....
    you can directly het that from this parameter...
        CALL FUNCTION "FMa Name'
          EXPORTING
            control_parameters = wsl_control
            output_options     = wsl_outpt
            user_settings      = ''
            wtg_itemdetails    = tl_itemdet
             wtg_vttp              = l_vttp
          IMPORTING
            job_output_info    = sl_spooldet
          EXCEPTIONS
            formatting_error   = 1
            internal_error     = 2
            send_error         = 3
            user_canceled      = 4
            OTHERS             = 5.
        IF sy-subrc <> 0.
        ENDIF.
    The inporting parameter sl_spolldet will have the Spool id.
    and you fetch by, using the below mentioned way..........
        READ TABLE wsl_spooldet-spoolids INTO wsl_wa_spool INDEX 1.
          IF sy-subrc = 0.
              Convert it into PDF using 'CONVERT_OTFSPOOLJOB_2_PDF'
              then attach it and send a mail.....with all properties set such as Delivery report....
          endif.
    If you have any issues, please let me know........
    Thanks & Regards,
    Vamsi

Maybe you are looking for

  • Insert to ms access wont work

    i have jsp page whice i insert data into ms access. but nothing work. no new data inserted to table this is the code: <%@ page language="java"%> <%@ page import="javax.servlet.*" %> <%@ page import="javax.servlet.http.*" %> <%@ page import="java.sql.

  • Two sided printing after Adobe XI upgrade

    Please can someone tell me how to do two-sided printing with Adobe XI?  The online instructions do not work.

  • SAP-MRS, What is capacity pots

    Hi All We have  implemented SAP MRS/ Multi Resource scheduling along with SAP-Plant Maintenance in EHP6 SAP GUI. I 've a doubt & 'm not getting clarified on some certain areas reagrding MRS / Will anyone update us with the below given queries? What a

  • Registering disks with oracleasm

    Hello, I am new to ASM and am having trouble getting the oracleasm to recognize my disks. I had the SA set up and present the logical volumnes as follows: [root@remarkable db_1]# cat /proc/partitions major minor #blocks name 3 0 209715200 hda 3 1 104

  • In osx 10.9 i am unable to double click on contacts to add to an email

    I was long able to merely click on the contacts icon when creating a new message and the contact would be added to the list of addressees. Since "upgrading" to OSX 10.9, that function seems to have disappeared. Is there a way to restore this?