How to get a GB project from iPad2 to MacBook

Hi folks,
I posted this question yesterday in the logic forum.  It seems that it is possible to export an entire GB project from iPad2 to a Macbook and open it with Logic Pro.  Can some kind soul offer a step by step guide ?  I am missing something, I've exhausted my search options and it's driving me nuts.  TIA.

with i'm not sure if you can go directly from GBi to Logic without GBX as a middle step, but here are the GB instructions:
http://www.bulletsandbones.com/GB/GBFAQ.html#transfergbitogbx
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

  • How do I export a project from Final Cut Pro onto my desktop?

    How do I export a project from Final Cut Pro to my desktop as a movie?

    Can anyone please help me.. when I click on my timeline in my project library and try to export movie nothing happens! and when I  try to "share" to youtube I get an error message stating that it cannot be exported because it contains "no video"... The 4 minute music video that I've created with shots off my Canon T2i looks and plays great....If I uploaded the videos into Final Cut but did not save them on my desktop or anywhere else on the Mac would this be a reason to get this message? I have never experienced this before...the only option under "share" that works is "email"
    [email protected]

  • How can I convert .cp projects from Captivate 2 to .cptx projects for Captivate 7?

    How can I convert .cp projects from Captivate 2 to .cptx projects for Captivate 7? Do I have to use some other version between 2 and 7 to do this?

    I doubt you are going to be able to find all those previous versions and the time it would take to install, open the project, verify it, and everything in between (and without license keys, they would only be saved from trial versions which would be an issue), it seems it would be better just to start with Cp7 and put the effort into that.
    Completely off topic, one of the things I like about Authorware is that Macromedia provided previous versions that would allow you to open up and save the projects to get to version 7. It was a nice little touch they provided for developers. I don't believe that Adobe does this for Captivate though.
    Dave

  • How do I Retrieve imovie projects from and external drive back into my mac internal drive

    How do I Retrieve imovie projects from and external drive back into my mac internal drive?
    Thank You

    Every working drive, Internal or External, should produce an Icon on your Desktop. If you cannot see those, click on the Desktop (to get Finder) and choose Preferences off the Finder Menu. The general pane has checkboxes for "Show these items on the Desktop:"
    Double click the Icon for your External Drive to open it. Open the folders on it until you find the Items you want to copy. Drag them to the Icon of your Internal Drive, or open the folder where you want them to land and drop them in there.
    A drive that does not appear on the desktop after you have asked it to may be damaged. But it would be smart to do a Restart to see if it is recognized again at next Startup.

  • How can get 40,000 pix from old computer restored by Carbonite to new computer into PE 11 or 12?

    I bought a new,  faster, more storage Windows 8 computer.
    I had 40,000 pix on old computer tagged with names, event, location, date with PE 11. Also several projects involving hundreds of pix.
    Carbonite restored all files (250 gig) from old computer to new, and their tech support says they all are on the new computer.
    I bought the new PE 12 and installed it on new computer.  It has only found 4,000 pix.  I don't at all like PE 12 after enjoying PE2-11 and managing all my  pix with it.  PE11 was clearer in the pix presentation.
    Apparently when imported to the new computer, I lost the tags that went to events, location, and the person tags did not  separate family from friends etc.  I can't even find my projects.
    I was so frustrated with PE12, that I installed PE11, but everytime I try to open the Organizer, it doesn't open.
    Help.  I am so frustrated.  I am pretty sure  before I made the transition that I had written all tags to files.  When I put PE11 on the new computer, why won't it give me what I had on the old.
    This is probably my 10th generation computer change, and I never had such problems before with PE.

    I am using 10 and 11 instead of 11 and  12.  I tried to go back and edit,
    but couldn't figure out how.  Sorry,  typing errorC.
    In a message dated 2/6/2013 7:02:33 P.M. Eastern Standard Time, 
    [email protected] writes:
    Re:  How can get 40,000 pix from old computer restored by Carbonite to new 
    computer into PE 11 or 12?
    created by Jeff A Wright (http://forums.adobe.com/people/JeffAWright) 
    in  Photoshop Elements - View the full  discussion
    (http://forums.adobe.com/message/5050443#5050443)

  • How to get all the values from the dropdown menu

    How to get all the values from the dropdown menu
    I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
    How do I get number of item is selection dropdown?
    How do I extract a ?name? for each value, one by one?
    How do I change a selection by referring to particular index of the item in a dropdown menu?
    Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
    RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
    Message was edited by: testtest

    The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
    <Select Name=ProdType ID=testProd>
    </Select>
    I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
    Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
    If I want to search by id I could do the following:
    Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
    Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
    You can use the FindElement to grab links, text boxes, etc.
    The next example grabs from a link on a page
    Home
    Set x = RSWApp.om.FindElement("Home","A","innerText")
    I hope this helps clear it up.

  • How to get the return values from a web page

    Hi all :
       how to get the return values from a web page ?  I mean how pass values betwen webflow and web page ?
    thank you very much
    Edited by: jingying Sony on Apr 15, 2010 6:15 AM
    Edited by: jingying Sony on Apr 15, 2010 6:18 AM

    Hi,
    What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
    Regards,
    Karri

  • How to get warranty service claim from nokia c5-03...

    how to get warranty service claim from nokia c5-03 in india because i have problem with nokia c5-03 I Purchase 2 week ago a new nokia c5-03 but from day 1 i facing same problem like 1) app close itself 2) internet browse close if any thing is downloading or downloading over 3) memory full always then i should reboot the phone then it work. 4) ovi map is open it shows memory full close the app So kindly help me how to get warranty service claim from nokia c5-03 in india i am unhappy with nokia c5-03
    Solved!
    Go to Solution.

    i updated software also but the same problem cont... I want to know that nokia will give back money or exchange for other new mobile

  • I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?

    I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?  Any help will be appreciated.  Thank you.

    This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
    https://discussions.apple.com/docs/DOC-4141

  • How can I move my project from external hard drive to my macbook pro?

    How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance

    Try here...
    Setting-up a new Mac from an old one, its backups, or a PC

  • For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

    For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

    contact itunes support

  • How do I move a project from one library to a different existing library in Aperture 3.2.3?

    How do I move a project from one library to a different existing library in Aperture 3.2.3?

    Export as a Library, then import into the second (already existing) Library.
    From the User Manual:
    In the Library inspector, select the items you want to transfer, then choose File > Export > Items as New Library.

  • How do I transfer a project from someone else's FCPX, version 10.0.9, which I can no longer open, to my FCPX, version 10.1.4?

    How do I transfer a project from someone else's FCPX, version 10.0.9, which I can no longer open, to my FCPX, version 10.1.4?

    You need all the project and event folders associated with the production. They need to be in explicit locations or they will not be seen my the application.
    Start reading here
    http://www.fcpxbook.com/updates/101/
    You use the Upgrade Project and Events function in the File menu when you have the correct folders in the correct location to update the volume you want.

  • How to get the current week from sysdate?

    Hi sir,
    i want to know how to get the current week from sysdate?
    thanks

    Hi Nicolas
    It seems you like to check my post and also make commend ;) thanks for your attention
    Have you ever read the posts above and given solutions ?Yes, I did
    Have you read the docs ? Yes, I checked
    What's the added value here ?Did youYou shared doc with solution(long one), I shared short one which point same solution(Check what Joel posted)..So what is benefit, As you can guess oracle docs are sometimes become so complicated as specialy for beginner...(At least it was like that for me and Belive me somedocs are still sooo complicated even for oracle coworkers ) But for you I dont know ;)
    => Why writting the PS in bold ?Why.. Let me think... Ohh Maybe I am looking some questions(many) and even user get answer they should not changed status so I am reading some posts and try to get problem and loosing time..
    So I am putting that PS wiht BOLD because I dont wanna lose time my friend ;) Because While I am trying to help ppl here In same time I am trying to giving support to my customer prod systems. Which mean time is very important for me...
    Hope my answer could satisfy you..
    One important PS for you.. You may not like my posts (or someone) but my friend I become tired to read&answer and make commend to on your comment which is about my posts.
    I am not newbie in forum(At least I fell like that) and I belive I know how I should make post..
    Thank you
    Regards
    Helios

  • How to get the selection parameters from logical database into one of the t

    Hi Sap ABAP Champians,
    How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
    Please help me for this
    Thanks
    Basu

    Hi
    Thanks, that will work, but then I'll have to insert code into all my reports.
    I can see that "Application Server Control Console" is able to rerun a report.
    This must mean that the Report Server has access to the runtime parameters.
    But how?
    Cheers
    Nils Peter

Maybe you are looking for

  • BAPI_SALESORDER_CREATEFROMDAT2 - not working for multiple  BOM

    Hi - I am using BAPI_SALESORDER_CREATEFROMDAT2 function module to create sales order with multiple material. If more than one BOM materials are passed to the FM,this FM is giving error and not creating sales order. I have to pass multiple BOM to the

  • PLD - SO needs to display Text line

    Dear All, Our customer's marking documents has text type lines. When I tried to print it on A/R invoice and A/R down payment invoice, it works good. When I tried to print it on Sales Order, text lines have always been printed first. Then items and su

  • Error submitting a support message to Solution Manager

    I get an error when try to submitting a message to solution manager via portal. Can anyone explain why this error occur. An exception occurred while processing a request for : iView : pcd:portal_content/com.bc.SuperRoles/com.bc.role.solutionmanager/c

  • Setting sessionScope variables on PageLoadBegin

    Hello all I am having problems setting and retrieving the sessionScope variables - everytime I attempt to retrieve the value - I get nothing back. I have put the code in two places to ensure that the variables was set. Anyhelp would be greatly apprec

  • Modeling objects in schema

    I have adopted a schema with many views and tables. Well, there is no primary key or FK. How can I come up a ER diagram? If I can't, how can I explain to my boss?