How to get a list of file paths for all files used in a project

I have a project in Premiere Pro CC which has a large number of bins. A sequence in one of these bins uses files from other bins. I am trying to find the locations of all each of the files used in the project.
1) Obviously I can select each clip in the timeline and show in finder, but there a lot of clips
2) The video usage associated with each file in the project would help. However
1. I haven't found a way to display only clips that have video useage if all of the bins have not been expanded.
2. Video usage shows usage for all sequences, so one would have to manually check the pull down for each file to see if it is used in the sequence in question.
3) I tried exporting the project to final cut pro xml. The path url gives me the information that I need. For some reason, however, when I do the export only one clip's information is there, not the information for all of the other clips in the project.
4) I tired an export for speedgrade and all of the file names are there. However the paths are not.
Basically I want to find all of the files in the project and relocate them to a specific folder for that project. There's got to be a way to do this but I'm not seeing it ....

Thanks for the suggestion concerning the file path. And certainly it would have been nice to have done this before beginning. However this is a project that has been around for quite a while, and the files have been moved into different bins. And now the project sequence is being revised.
So the problem is, worded slightly differently, how can I search all of the bins for the files that are used just by this sequence, ignoring the files which are used by other sequences? Or, how can I get a list of the file paths of the files that are used in the sequence?

Similar Messages

:-) How can we change the default file path for Bank file ( dmee ) ?

Hi All,
We encounter a problem.
Electronic bank file ( created after a F110 run ) are created, in an automatic way to the DIR_TEMP directory. ( On the SAP server )
How can we change the default file path for Bank files ( dmee ) ?
We'd like to specify another path.
Thx for your help.
Erwan

Hello,
Make sure that you have created the directory in transaction code AL11 with the help of basis consultants.
You can link your PC directory to the application server.
You can maintain the path whether your file needs to get saved in OBPM4 against your DMEE structure example GB_BACS etc.
If you do not maintain any path in OBPM4, then the file gets saved to temporary directory. If you give the directory path name in OBPM4, then the file gets saved to that directory with numbers 0001, 0002, 0003 etc till it reaches 9999 and reset from the beginning.
If you give the path as well as file name as ABCD, then the file gets generated to that directory folder with ABCD0001, ABCD0002, ABCD0003 etc. till it reaches ABCD9999 and reset from the beginning.
Hope this solves your problem.
Regards,
Ravi

How to generate a list of pick dates for all scheduled deliveries?

Hi!
How to generate a list of pick dates for all scheduled deliveries?
What all the tables involved?
Thanks
Imran.

Thanks for the suggestion concerning the file path. And certainly it would have been nice to have done this before beginning. However this is a project that has been around for quite a while, and the files have been moved into different bins. And now the project sequence is being revised.
So the problem is, worded slightly differently, how can I search all of the bins for the files that are used just by this sequence, ignoring the files which are used by other sequences? Or, how can I get a list of the file paths of the files that are used in the sequence?

The specified file or folder name is too long,the url path for all files and folders

The specified file or folder name is too long,the url path for all files and folders must be 260 character or less
can we increase this limit?
MCTS,ITIL

Hi,
As I understand, you want to increase the length of URL path in SharePoint 2010.
Per my knowledge, this limit cannot be increased. SharePoint limits URL length because all relative URL links are stored in the clear forms on the SharePoint content DB and often this links are used as primary keys to link one table with another. Fields
which are used to store these links (for instance tp_DirName from the AllUserData table) allow storing only 256 characters.
There are several ways that you can resolve or mitigate URL length problems in the SharePoint Server 2010 environment. The following list provides suggestions:
1. Upgrade all the end-user browsers to Internet Explorer 8, which has a longer URL length limit.
2. Use shorter names for sites, folders, and documents and control the depth of the site and folder structures to reduce the lengths of URLs.
3. If possible or allowed, use ASCII names for sites, folders, and documents. This will avoid situations where the URL will be lengthened by being encoded.
4. To reduce the risk that the SharePoint Server 2010 end-users will encounter problems because of URL length limitations, we recommend that you apply the following effective limits in the deployment:
256 Unicode (UTF-16) Code units - the effective file path length limitation, including a domain/server name
128 Unicode (UTF-16) Code units - the path component length limitation
More reference:
http://technet.microsoft.com/en-us/library/ff919564(v=office.14).aspx
http://sharepointknowledgebase.blogspot.in/2013/04/url-path-length-restrictions-in.html#.VKJN53BJA
Best regards,
Sara Fan

How to get available quantity in Inventory levels for all materials

Hi..All
I am Abap Developer and i have a Requirement that to Print a report that Displays " Inventory levels (available quantity) for all materials"
1) What tables can i use to retrive the data to get the Inventory levels (available quantity) for all materials.
2).What are the fields can used in that tables that use ful for end user.
Thank you,
Madhu .
Edited by: madhubabu rao on Oct 15, 2008 9:10 AM

Hi,
I'm not sure what you mean when you are speaking about inventory levels and available quantity.
I mean that you may have stock of 100 pcs of a certain material but from an open PrdOrd can come a reservation for this component (e.g. 20 pcs) that reduces this the available quantity (to 80 pcs).
If you want only the stock levels, you don't have to write any ABAP code, since MB52 report is designed for this purpose.
If you want to know the available stock (considering requirements (PIR, DepReq, SO), and stock-like MRP elements (PldOrd, PurReq, PrdOrd, PO, etc)) you should check report MD04 and examine how it works, which tables it uses (ST01).
http://iorboaz.blogspot.com/2005/04/get-md04-data.html
Regards,
Csaba
Edited by: Csaba Szommer on Oct 15, 2008 9:34 AM
Edited by: Csaba Szommer on Oct 15, 2008 9:34 AM

How to get the name and the path of the font used in photoshop (not textItem.font)

I'm trying to get the real name of the font and the path, is there a "easy" way to do it ?
i need to get the font file (*.ttf or *.otf) and copy to the same directory as the psd file, that's why textItem.font doen't work for me.
thanks in advance

You could try this as it looks as if you are using Windows.
Run the VBS script to create a fontlist file on the desktop.
Then run the javaScript on the PSD document.
It should copy the fonts to the same folder as the document, it will also create a text file with a list of fonts.
It didn't find all the fonts in my test psd maybe because it wasn't in the windows/font folder?
VBS.
Set wshShell = WScript.CreateObject("WScript.Shell")
Set wshSysEnv = wshShell.Environment("PROCESS")
sMyFile = "c:" & wshSysEnv("HOMEPATH") & "\Desktop\Fontlist.txt"
Dim objFileSystem, objOutputFile
Dim strOutputFile
Set objFileSystem = CreateObject("Scripting.fileSystemObject")
Set objOutputFile = objFileSystem.CreateTextFile(sMyFile, TRUE)
Dim str
Const HKEY_LOCAL_MACHINE = &H80000002
strComputer = "."
Set objReg=GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & _
strComputer & "\root\default:StdRegProv")
strKeyPath = "Software\Microsoft\Windows NT\CurrentVersion\Fonts"
objReg.EnumValues HKEY_LOCAL_MACHINE, _
strKeyPath,arrEntryNames,arrEntryZZZ
For Each entry in arrEntryNames
str = wshshell.RegRead("HKLM\Software\Microsoft\Windows NT\CurrentVersion\Fonts\" & entry)
       objOutputFile.WriteLine(entry & "," & str)
Next
objOutputFile.Close
javaScript.
#target photoshop;
app.bringToFront();
main();
function main(){
if(!documents.length) return;
try{
var Path = activeDocument.path;
}catch(e){
    alert("This document needs to be saved before running this script!");
    return;
var FontFile = File(Folder.desktop + "/FontList.txt");
if(!FontFile.exists){
    alert("You need to run the vbs script first to create the FontList file!");
    return;
var FontList = new Array();
    FontFile.open('r') ;
while(!FontFile.eof){
   strInputLine =FontFile.readln();
   if (strInputLine.length > 3) inputArray = strInputLine.split(",");
   if(inputArray.length == 2) FontList.push([[inputArray[0]],[inputArray[1]]]);
FontFile.close();
var PSDtextLayers = getNamesPlusIDs();
PSDtextLayers = UniqueSortedList(PSDtextLayers);
for(var a in PSDtextLayers){
    for(var f in FontList){
         var rex = new RegExp;
         rex = PSDtextLayers[a].toString();
        if(FontList[f][1].toString().match(rex,"i")){
            var From = new File("/c/windows/fonts/" + FontList[f][1].toString());
            var To = new File(Path + "/"+ FontList[f][1].toString());
            From.copy(To);
            break;
var rFonts = new File(Path + "/required Fonts.txt");
rFonts.open('w');
rFonts.write(PSDtextLayers.join('\n'));
rFonts.close();
function UniqueSortedList(ArrayName){
var unduped = new Object;
for (var i = 0; i < ArrayName.length; i++) {
unduped[ArrayName[i]] = ArrayName[i];
var uniques = new Array;for (var k in unduped) {
   uniques.push(unduped[k]);}
return uniques;
function getNamesPlusIDs(){
   var ref = new ActionReference();
   ref.putProperty( charIDToTypeID( "Prpr" ), charIDToTypeID( 'NmbL' ));
   ref.putEnumerated( charIDToTypeID('Dcmn'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
   var count = executeActionGet(ref).getInteger(charIDToTypeID('NmbL')) +1;
   var Names=[];
try{
    activeDocument.backgroundLayer;
var i = 0; }catch(e){ var i = 1; };
   for(i;i<count;i++){
       if(i == 0) continue;
        ref = new ActionReference();
        ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
        var desc = executeActionGet(ref);
        var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
        var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
        if(layerName.match(/^<\/Layer group/) ) continue;
        if (desc.hasKey(stringIDToTypeID('textKey'))){
            desc = desc.getObjectValue(stringIDToTypeID('textKey'));
            desc = desc.getList(stringIDToTypeID('textStyleRange')).getObjectValue(0).getObjectValue(stringIDToTypeID('textStyle'));
            var postScriptName = desc.getString( stringIDToTypeID('fontPostScriptName'));
Names.push(postScriptName);
return Names;

How to get a list of production orders for a work center?

Hello SDN Community,
I have an requirement to display in a pop-up window a list of production orders for a work center.
Does anyone know which screens/transactions would show this relationship?
Or better yet, does anyone know how to demonstrate this from the tables themselves?
Thank you,
Dean Atteberry.

Hello Mangalraj.S
>>Goto COOIS-->For the field List select PPIOO000 - operations and layout -->standard layout
>>and execute,by this you will be able to see the operations for each order and to which
>>work center they are assigned.
The system I am working on is ECC 6.0.
For this system the values in the dropdown for the "List" field are "Capacities, Items, Order Headers, Sequences, Trigger Points, etc". But nothing that says PPIOO000 - operations and layout.
>>Or else in the in input screen of COOIS,enter the work center for which you want to see which
>>are the production order's assigned and execute.
For system I am working in, I do get a grid display when entering a work center. It has columns like "Order, Material, Icon, Order Type, MRP cntrlr, etc." But no column with Work Center.
Any further insight into how to use this transaction to display a list of production orders for a work center would be greatly appreciated.
Thank you,
Dean Atteberry.

How to get the list of collaboration rooms for a particular user??

Hello Experts,
I have a requirement to get the list of all the collaboration rooms for a given user. I have started developing the Web Dynpro application by reusing necessary jars required to the web dynpro application.
on some action I am trying to execute the below code:
IRooms roomsAPI = (IRooms) PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID);
which I have got from help.sap.com
But, there's some exception being raised and not able to retrieve the list of rooms.
Could somebody tell me what am I doing wrong.
Regards,
Raghu.

Hi,
the below is the code that I have used to get the list of rooms. But I'm getting into the NullPointerException .
I have added the catch block for time being, but could you please let me know the reason for NullPointerException?
public void onActiongetRooms(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActiongetRooms(ServerEvent)
     IWDMessageManager msgMgr = wdComponentAPI.getMessageManager();
     try{
          IService service = PortalRuntime.getRuntimeResources().getService(IRooms.KM_SERVICE_ID);
          IRooms roomsAPI = (IRooms) service;
          String roomID = "00bd6231-fdca-2c10-919c-97bf74054b7d";
          IRoom room = roomsAPI.getRoom(roomID);
          String roomname = room.getName();
          msgMgr.reportSuccess(roomname);
     } catch (NullPointerException e) {
          // TODO: handle exception
          msgMgr.reportException("Null Error:"+e.getMessage(), true);
     catch (RoomInstantiationException e) {
          // TODO: handle exception
          msgMgr.reportException("Error :"+e.getMessage(), true);
    //@@end
Any thoughts are much appreciated.
Thanks in advance.
Raghu

Aperture using 3 week old file paths for referenced files after Rebuild

I recently had major problems with some Nikon D60 files (the referenced files switched original files). I had to re-import everything a start again. Having sorted everything out, I then relocated the files with new files names (thinking that the original file names may have caused the problems).
This was 3 weeks ago. However, when I Rebuilt the library today, these renamed images went offline because Aperture has kept the original file paths (with the original names).
Does anyone know how to update file paths to the current ones? (rather than some random previous one).

Thanks for the reply. I will check out the links.
I should have mentioned that all renaming/moving of files was done from within Aperture. Aperture is not updating its own file paths.
The process is this. Having moved/renamed the images (using Aperture's Relocate Masters) I am able to use the software, close it down, restart etc and the images will be found correctly with few/no 'lost' images. It is when I use 'Rebuild' that the file paths revert to an old, previously used version that is no longer valid. It is as though there are two preference files, each with a different file path information. There was a post sometime ago that mentioned using Terminal commands to force Aperture to update to the correct files paths/directories. I haven't been able to find the post yet though.
These particular files (Nikon D60) are not from my own camera so I am not sure why I have had such an issue. Normally I am using a Canon 5D MK2 or a Phaseone digital back. However, even with my own equipment I do regularly have to 'Reconnect' one or two image files that have become lost which is annoying. So I am keen to get to the bottom of this issue.

File path for excel file

Hi Everyone,
I am writing and reading data from an Excel file (see code) and it works but I have to specify the path in the script and if I want to change the file I have to change the file path in the code.
I would like to create a window that pops and asks the user to pick the excel file he wants to work with, copy the path and replace
"C:\Users\Public\Documents\National Instruments\DIAdem 2012\Documents\Constant Radius\USED\Test.xlsx" by that path.
I hope someone can give me a hand with this.....
Thanks
Leo
Dim Excel,a Set Excel = CreateObject("Excel.Application") Excel.Visible = TRUE Call Excel.Workbooks.Open("C:\Users\Public\Documents\National Instruments\DIAdem 2012\Documents\Constant Radius\USED\Test.xlsx") a=Excel.ActiveSheet.Cells(1,1).Value Excel.ActiveSheet.Cells(1,4).Value = RV1(1) Excel.ActiveSheet.Cells(2,4).Value = RV1(2) Excel.ActiveSheet.Cells(3,4).Value = RV1(3) Excel.ActiveSheet.Cells(4,4).Value = RV1(4) Excel.ActiveSheet.Cells(5,4).Value = RV1(5) Excel.ActiveSheet.Cells(6,4).Value = RV1(6) Excel.ActiveSheet.Cells(7,4).Value = RV1(8) Excel.ActiveSheet.Parent.Saved = FALSE Excel.Quit Set Excel = Nothing
Solved!
Go to Solution.

Dim Excel,a
Set Excel = CreateObject("Excel.Application")
Excel.Visible = TRUE
Call Excel.Workbooks.Open("C:\Users\Public\Documents\National Instruments\DIAdem 2012\Documents\Constant Radius\USED\Test.xlsx")
a=Excel.ActiveSheet.Cells(1,1).Value
Excel.ActiveSheet.Cells(1,4).Value = RV1(1)
Excel.ActiveSheet.Cells(2,4).Value = RV1(2)
Excel.ActiveSheet.Cells(3,4).Value = RV1(3)
Excel.ActiveSheet.Cells(4,4).Value = RV1(4)
Excel.ActiveSheet.Cells(5,4).Value = RV1(5)
Excel.ActiveSheet.Cells(6,4).Value = RV1(6)
Excel.ActiveSheet.Cells(7,4).Value = RV1(8)
Excel.ActiveSheet.Parent.Saved = FALSE
Excel.Quit
Set Excel = Nothing
Hi,
I am just repasting the code. I don't know what happened earlier but everything went on the same line, sorry

How to get the list of BIP reports for a perticular instance?

Hello All,
We have a requirement to list all the BI Publisher reports available in an instance from outside BIP.Is there any way to get the reports with the instance details as parameters?And is it possible to run BIP reports from command line?
Do we have any API's to do these?
Thanks in advance...

Hi,
there's a Java API and a Web Service API available for BI Publisher. The Web Services API for example has functions to get the content of folders or the parameters of a report.
Have a look at
http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e10416/bip_webservice_101331.htm#CHDGIJHH
Regards
Rainer

How to hide ribbon but show welcome control for all users using security trimmed control in sharepoint 2010

Hi All,
I have a requirement to hide ribbon in a document library for the read permission users. I have applied SPSecurityTrimmedControl, it is working for the read permission user but for the whole site it is hiding and also unable to see the welcome control,
like user name, sign in as different user, etc.,
<Sharepoint:SPSecurityTrimmedControl runat="server" ID="spTrimRibbon" PermissionMode="All" Permissions="ManageLists">
I want to apply SPSecurityTrimmedControl to specific list/library with welcome control. Can someone please help me here.
I Appreciate your assistance...
MercuryMan

Hello MercuryMan,
I guess you have applied your code in master page that's why it is hidden from site. To hide specific list ribbon, go to your list-->and edit the page-->then add content editor webpart and apply below script.
<SharePoint:SPSecurityTrimmedControl PermissionsString="ManagePermissions" runat="server">
<div id="s4-ribbonrow" class="s4-pr s4-ribbonrowhidetitle">
</div>
</SharePoint:SPSecurityTrimmedControl>
http://blogs.msdn.com/b/sharepointdev/archive/2012/04/30/how-to-hide-the-ribbon-in-sharepoint-2010-rajeswari-mohandas.aspx
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to get a list of every application on my computer?

I'm trying to figure out how to get a list of every application on my computer using applescript. I know it is possible for the system to do this, as evidenced by the dialog you get when you use the "choose application" function. Other examples are doing a spotlight search for "kind:app" or programs like Namely or QuickSilver.
Is there a way to do this in applescript? The only solution I've come up with so far is to use the command:
<pre>set everyapplicationaliases to choose application as alias with multiple selections allowed</pre>
and manually select all on the resulting dialog. I can then take the results and go from there, however there are a few significant problems with this approach.
1. It requires user interaction. (I have an idea for some future applications that could use this functionality if it can be done without user input.)
2. It's horribly slow. As a test run I choose all the applications from the dialog, extracted some basic info and put the result on the clipboard. It took a couple of minutes to complete this relatively basic task. In comparison, running the aforementioned spotlight search took maybe ten seconds.
Thanks in advance!
best,
peter

For these specific queries my results are...
set appList to paragraphs of (do shell script "mdfind \"(kMDItemKind = 'application'c) || (kMDItemKind = 'widget'c)\"")
3082
set appList to paragraphs of (do shell script "mdfind \"(kMDItemKind = 'Application'c) || (kMDItemKind = 'Widget'c) ||
((kMDItemContentTypeTree = 'com.apple.application') && (kMDItemContentType != com.apple.mail.emlx) && (kMDItemContentType != public.vcard))\"")
3115
I think I finally found some numbers that make sense!
When I search for Kind:Application by the Command+F method in the Finder, I get a total of 2521 items, of which 2477 are "Applications" and 44 are "Other".
(Just by eyeballing it, "Other" seems to include some Classic Apps and some .bundle files.)
The total # found by this method (2521) plus the number of Widgets found using mdfind (318) equals the number of total number of items found by spotlight (2839).
I also noticed that these numbers almost equal the spotlight number:
mdfind results for kMDItemKind:
Widgets: 318
Applications: 1684
Classic*: 795
and
Command+F "Other" items: 44
3181684+79544 = 2841
It may be a fluke that this is so close to the 2839 spotlight gives, or maybe there's an overlap somewhere...
Tying this back into my initial question, it seems like the original mdfind command for Applications is probably the best answer for what I was looking for,
since I wasn't really thinking about Classic apps and Widgets anyway.

To Get the list of sales orders for a Business partner in CRM.

Hi all
Is there any Function module or BAPI to get the Sales orders for a Business partner in CRM. I know there is a BAPI to get the list of sales orders for a customer in ECC, but I donu2019t know how to get the list of sales orders for a Business Partner in CRM.
Can anybody tell me if there is an inbuilt function module or BAPI available?
If not how can I pick the sales orders of a business partner in CRM? Between which tables should I apply a join and write SELECT statement to get list of sales orders for a business partner in CRM.

Hi Jessica,
Try CRM function module CRM_BUPA_READ_ORDER_OBJECTS.
You'll get a table with the documents associated to that partner, where you can work on.
Kind regards.

How to get folder(directory path only not file path) from local file system

Hi Firends,
How to get folder(directory path only not file path) from local file system , whenevr i will click on browse button.
Please give reply for this one , if anybody knows.
Thanks,
Anderson.

Hi Anderson,
if you're using flash.filesystem.FileReference - then it is run in black box - except of filename, size and creation data (and few other properties available after some operation succeeded). This is part of security features in Flash runtime (described in header section):
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/FileReference .html
This for example implies that user can download a content to local machine - but that content cannot be loaded back into Flash runtime. For this you would need either Air runtime flash.filesystem.File:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/filesystem/File.h tml
(so you would created Air runtime based application: desktop or mobile but not web, even as standalone project) or you would need one of 3rd party tools that add file access/file information features to standard Flash runtime applications converted to standalone native applications.
hth,
kind regards,
Peter

How to get a list of file paths for all files used in a project

Similar Messages

Maybe you are looking for