How to get a method to call the correct passed object in the constructor

I have 2 constructors for a certain object:
public class ABC{
//variables
private DEF def;
private GHI ghi;
public ABC(DEF def){
this.def = def;
someMethod();
public ABC(GHI ghi){
this.ghi = ghi;
someMethod();
}Now, this someMethod() references / calls a method from the 2 classes passed in the constructor say def.getSome() and ghi.getSome().
Depending on which constructor is used, it should call the respective xxx.getSome(). Do I need to write 2 someMethod()s or is there a way that one method will call the proper xxx.getSome() ?
Thanks.....

Hi
Following the example may be help to you call correct method,
// Interface QuizMaster
public interface QuizMaster {
     public String popQuestion();
// Class StrutsQuizMaster
public class StrutsQuizMaster implements QuizMaster{
     public String popQuestion() {
          return "Are you new to Struts?";
// Class SpringQuizMaster
public class SpringQuizMaster implements QuizMaster{
     public String popQuestion() {
          return "Are you new to Spring?";
// Class QuizMasterService
public class QuizMasterService {
     QuizMaster quizMaster;
     public QuizMasterService(SpringQuizMaster quizMaster){
          this.quizMaster = quizMaster;
     public QuizMasterService(StrutsQuizMaster quizMaster){
          this.quizMaster = quizMaster;
     public void askQuestion()
          System.out.println(quizMaster.popQuestion());
// QuizProgram
public class QuizProgram {
     public static void main(String[] args) {
          // Option : 1
// StrutsQuizMaster quizMaster = new StrutsQuizMaster();
// Option : 2
SpringQuizMaster quizMaster = new SpringQuizMaster();
          QuizMasterService quizMasterService = new QuizMasterService(quizMaster);                    
          quizMasterService.askQuestion();
here you can create object of StrutsQuizMaster or SpringQuizMaster and pass into the QuizMasterService object constructor, base on the object correct method will be called.

Similar Messages

  • When I facetime the ipad (email address) it calls my phone. The accounts are completely separate. How can I get this to only call the ipad and not my phone as well?

    When I facetime the ipad (email address) it calls my phone. The accounts are completely separate. How can I get this to only call the ipad and not my phone as well?
    It calls both the ipad and iphone when calling the associated email address for the ipad. However, when I call the iphone it does not call the IPAD.
    Thanks for your help

    Are you trying to message another Apple device?
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
     Cheers, Tom

  • HTTP-Post/Get method of calling the query service allows us to build URL

    Hi,
    I am new to webservices.i have requirement that, using a HTTP-Post/Get method of calling the query service that allows us to build an URL and if we call that url it wil populate XML object.i need query LDAP server for getting users manager details ,in request query we wil pass user details.thanks in advance..

    check same issue in java forum and this link:
    http://jakarta.apache.org/commons/httpclient/methods/post.html

  • How to get default values while using the transaction "BP"

    Hi Group,
    I have a query on how to get default values while using the transaction <b>BP</b>?
    The thing is:
    when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
    how can I achieve this?
    So please kindly let me know the procedure to achieve this.
    Thanks & Regards,
    Vishnu.

    Hi,
    The events of BDT can be used to default some fields on creating a partner.
    For this create a function module for ISDAT. attach that event in BUS7.
    In the ISDAT funtion modulethe following code should be used.
    For example to set the nationality:
    I_BUSDEFAULT-NATIO = 'DE.
    CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
    EXPORTING
    i_busdefault = I_BUSDEFAULT
    Regards, Smita.

  • How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amo

    How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0

    Hi,
    Is your formula attached to basic salary element or some other element? You need to make sure that basic salary element has some value and is processed before this formula is called. Are you able to see value for basic salary element after payroll run?
    Regards,
    Pawan

  • How call the constructor of the super type in the sub type?

    Hi, everybody:
    There are two type as belowing code:
    CREATE TYEP super_t AS OBJECT (
    a NUMBER(7,1),
    b NUMBER(7,1),
    CONSTRUCTOR FUNCTION super_t
    (a IN NUMBER:=null, b IN NUMBER:=null) RETURN SELF AS RESULT
    ) NOT FINAL;
    CREATE TYEP sub_t UNDER super_t (
    CONSTRUCTOR FUNCTION sub_t RETURN SELF AS RESULT
    Because super_t has the constructor that can pass 0 to two parameters, does the constructor of the sub_t can call the constructor of the super_t to create the instance of the sub_t?
    If can, how call?
    If not, need to rewrite the code as the constructor of the super_t in the constructor of the sub_t?
    Thank you very much!

    No the supertype constructor is not automatically called (that should have been trivial for you to prove to yourself). Unfortunately, you can't call it from the subtype either (there is functionality like Java's 'super'). You could define a named method in the supertype that does the initialization and call that in both the constructors however.

  • Anyone know how to get a free upgrade on the OSx 10.6

    I've been searching all night, and cant seemtofigure out how to get a free upgrade of the OS X 10.6! Anyone know where or how?

    There is no free upgrade.
    Do you currently have the 10.5.8 Combo update loaded?  (if not download and apply the Mac OS X 10.5.8 Combo Update )
    Then, check that your machine is suitable for Snow Leopard.   It needs to be a Mac computer with an Intel Core 2 Duo processor.   Check by reading the specs.
    Mac OS X v10.6 Snow Leopard -Read the Technical Specifications
    Snow Leopard is a paid upgrade by DVD not a download.  To buy the DVD, if you are from the USA go to … http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard.
    In Europe or otherwise substitute your national code in place of /us above.
    In UK go to Apple Store UK       Mac OS X 10.6 Snow Leopard - Apple Store (UK)
    Before you start upgrading, back up your files.   If you are unsure how best to do this, the following link is hugely informative.        Most commonly used backup methods: Apple Support Communities.
    Once you have upgraded to Snow Leopard, if your upgrade took you to 10.6.3 you will need to download and apply the Combo updater.  Mac OS X 10.6.8 Update Combo v1.1  and follow with software updates to pick up the most recent security and iTunes updates.

  • Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

    Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

    I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

    http://support.apple.com/kb/HT1449

  • My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..

    My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..
    So how do I create a separate I tunes on a PC which already has itunes... Or if not can I plug my iPad to the PC and use itunes on my iPad, and drag mp3s from a computer.
    I'm not sure what the equivalent of a desktop is on the iPad.. And I don't actually know how to use the icloud either...
    Can anyone start me off, given it have a iPad and use of a PC - not mine with existing iplayer
    I do have spotify soundcloud so I could potentially use these.. If there is a route of getting either mp3's etc to end up on my iPad or iPod.
    Kind Regards

    iTunes 11
    If you  have iTunes 11 turn on the Sidebar.  Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
    To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device and follow the instructions.

  • DATA TRANSFER - How to get a SINGLE SPACE in the downloaded file from UNIX?

    Hi Experts,
    Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
    So, I am keeping a single character just SPACE at the END of each record.
    Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
    Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
    But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
    Am doing every thing same in both cases.
    So,
    1 - Why its happening in case of UNIX file?
    2 - How to get a SINGLE SPACE  at the END in the downloaded file from UNIX?
    thanq

    Hi,
    I don't know if this works:
    perform SET_TRAIL_BLANKS(saplgrap) using 'X'.  
    perform SET_FIXLEN(saplgrap) using '0' '060'.   "put length of your line from-to
    ... download ...
    It will put space at the end of your line, according to the length.
    Hope it works,
    Chang

  • HT1222 My phone is telling me about a Software Update but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    See if this helps:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212

  • How to get values/data stored in the database into a list-item.

    how to get values/data stored in the database into a list-item.
    i tried to make a list item without any values assigned to it...but i got the below error.
    FRM-30191: No list items defined for required poplist.
    or
    FRM-32082: Invalid value for given item type.
    List EMPNO
    Item: EMPNO
    Block: EMP
    Form: MODULE5
    FRM-30085: Unable to adjust form for output.
    then according to some docs, i tried the the following for the trigger
    when-new-form-instance
    declare
         rg_name varchar2(40) := 'emp_rec';
         status number;
         groupid recordgroup;
         it_id item;
    begin
         it_id := Find_Item('empno');
         groupid := create_group_from_query(rg_name, 'select empno from emp');
         status := populate_group(groupid);
         populate_list(it_id, groupid);
    end;
    but yet didnt work... :(
    so how the heck do i get values fetched from the database table into the list item?

    for list items you need to values in the record group, one is the shown value and one is the returned value.
    Check out the online help for the populate_list built-in.
    You'll need something like select ename,ename from emp as the record group query.

  • I'm french, my white Ipod4g 16gb has been stolen 2 days ago, I would like to know how to get it back thanks to the serial number! please

    I'm french, my white Ipod4g 16gb has been stolen 2 days ago, I would like to know how to get it back thanks to the serial number! please

    You can't.
    Change your iTunes (Apple ID) password along with any other password that was stored in the iPod.  If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number).  If any passwords are associated with a bank or any other savings institution, contact them also and discuss approprate action with them.
    The only real protection you have is with the personal information on the device rather than the physical device itself.  This requires action before the device is lost/stolen.  If the device has significant personal information, it should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

  • How to get a check box on the selection screen

    Hi all
    can any body tell me how to get a check box on the selection screen

    parameter: pa_check   as checkbox.
    To define the input field of a parameter as a checkbox, you use the following syntax:
    PARAMETERS <p> ...... AS CHECKBOX ......
    Parameter <p> is created with type C and length 1. In this case, you may not use the additions TYPE and LIKE. Valid values for <p> are ' ' and 'X'. These values are assigned to the parameter when the user clicks the checkbox on the selection screen.
    If you use the TYPE addition to refer to a data type in the ABAP Dictionary of type CHAR and length 1 for which 'X' and ' ' are defined as valid values in the domain, the parameter automatically appears as a checkbox on the selection screen.
    REPORT DEMO.
    PARAMETERS: A AS CHECKBOX,
    B AS CHECKBOX DEFAULT 'X'.

Maybe you are looking for