How to get a person's photo into the column of messages in Mail?

I succeeded many months ago in getting a photo of three people to be attached to their outgoing and incoming messages (in that list of messages that is to the right of the sidebar) but have forgotten how to do it (there is nothing in the help). Like this:
I now want to try again. The photos involved are in my address book. How to do, please.

no answer!

Similar Messages

How do I add a jpg photo into the library

I am trying to animate a layer on top of a background, I've made the background layer the first in the back but when I animate it dissapeers. I can use one of the stock backgrounds from the library and it stays in thebackground while the other gif layers work fine. I want to use my jpg photo as the background, have it remain there while the animated gif runs, any suggestions would be greatly appreciated.
Thanks,
Mark

Hi Barbra,
I appreciate the help, I tried your idea but I'm probably doing something
wrong I can't seem to get the right sequence, but I'll keep playing with
it. If you go to our site theundertoneband.com you can see I am starting to
get this animating thing a little. I have a question, is there anyway to
make a normal pic into a background like they have in the library, or maybe
add my pic to the library?
Thanks for all your Help,
Mark

How to get (OAAD tcode) employee photo into sapscript / smartforms??

Hi!
I need to insert the employee photo jpeg (from oaad) into an sapscript or smartforms.
It's possible to do dynamically? (without file conversion)
Thanks

Hi,
I m providing u with this link, u may get some idea .
How to display the employee photo in a smartform
or
These are all the steps to upload the Photo.
1. Create a number range for SAP Archive Link :
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain number ranges.
Tcode: OANR
Create range 01 from 0000000001 to 9999999999 without the external number flag.
2. Document type HRICOLFOTO must exist with document class JPG.
IMG>Basis Components>Basis Services>SAP Archive Link>System Settings>Maintain document types.
Table: TOAVE
Tcode: OAC2
3. Document type HRICOLFOTO must be linked to object type PREL and IT0002.
IMG>Personnel Management>Personnel Administration>Tools>Optical Archiving>Set up Optical Archiving in HR.
View: V_T585O,
In all three columns there are minuses, don't put a flag in the check box.
4. Check which content repository (Archive) is linked to document type HRICOLFOTO and object type PREL.
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain Links.
Table: TOAOM_C,
Tcode: OAC3
5. Create this content repository with storage type FILE archive.
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain content repositories.
Tcode: OAC0
Storage type FILE archive can be attained by clicking on the field Storage type and clicking somewhere else in the screen with the right mouse button. Choose Possible entries and only then you get a list of all values. FILE Archive is entry number 08. Choose Version no. 0031 and Archive path something (e.g. C .
6. Link photo to personnel number.
Menu>Tools>Business Documents>Miscellaneous>Stored Documents.
Tcode: OAAD
Thanks,
Mamta Kumari

I'm trying to make a holiday card, but can't figure out how to get photos into the card.

I'm trying to make a holiday card, but can't figure out how to get photos into the card.

Selectto( s) and create the card - if you want to add more photos ot it drag then to the card project in the source pane on the left
LN

How do I get my Olympus ORF photos into Adobe elements 12

How do I get my Olympus ORF photos into my Adobe elements 12

Are you trying to import the photos into the pse 12 organizer or open them in the pse 12 editor?
They should be supported in pse 12 without any updates to camera raw.
What operating system and version are you using?

How do you drop a still photo into a video?

how do you drop a still photo into a video -- while continuing the audio track unchanded?

by popular demand, Kelli Applies Lip Liner to Audrey's Lips has been completely re-mastered. (ok, it was just one person who asked, but she's a very intelligent and articulate observer of such matters. she noted that the clip suggests "interesting possibilities", but that men probably would be unaware of that. i explained that "men are pretty simple, so we don't see too many moves ahead." she laughed.)
i believe that in an earlier post i indicated that in the re-mastered version i would delete the in-camera audio and dub in the audio from the Zoom H4n audio recorder. this i did.
(syncing the video and audio continues to be a nightmare, though ).
besides signifcantly improving the sound quality, using a separately recorded audio source allowed me to drop (2) still photos into the video track, and still preserve the continuity of the recorded conversation.
dropping in the stills the correct way (unlike in the first re-mastered video) was easier than i thought it would be. it's just a matter of dragging the Premiere Elements 7's red vertical timeline-cursor to the point on the timeline where you want the insert to begin, and then dragging and dropping the still photo alongside the red cursor. the amount of time the still will appear can be shortened or lengthened by dragging with the mouse -- the same way any other file can be extended or contracted.
the video coming out from the still was now running behind the soundtrack. but, the timeline shows the exact duration of the still, so the video coming out was shortened with the mouse by that same duration, and then the audio and video were back in sync.
to add the "sound effect" of the camera's shutter clicking (actually its mirror slapping) before each still appears, i found a point on the audio recording that had the click of my camera actually taking a still, and that had only a little audio from the models underneath it. removing all the audio before and after the sound of the camera click was, again, just a matter of finding the start/stop points i wanted, moving the timeline's red cursor to those points, and using the mouse to drag the ends of the audio file alongside the cursor.
because i wanted the sound of the camera click to merge with the converation anyway, i just put the audio file of the click on its own audio track (which allowed me to separately control its volume).
however, when i tried to copy and paste the audio file of the camera click to the beginning of the second still photo, i was not able to copy and paste by the normal method of using the mouse to right-click-file/left-click-"copy"/left-click-"paste". eventually, i tried doing so by clicking on "edit" on the menu bar at the upper left and then clicking on "copy" and "paste", and there was no problem. (go figure.)
as with the other re-mastered video, i brightened, increased contrast, made the hue a bit warmer, and added a little sharpening. (this has to be done individually for each separate video file that makes up the whole piece -- at least that's what i did.)
interestingly, the audio level can be tweaked directly on the timeline by using the mouse to drag up or down a horizontal yellow line running the length of the audio file.
i again rendered in Adobe Flash Video (.flv). (annoyingly, in XP at least, there's a default download destination that has to be reset everytime you want to save in a different location). from a drop-down menu i selected "NTSC Flash Video 700k" (just in case) and left the file name as "Untitled" (since no matter what i change it to, it saves as "untitled.flv", so i have to rename it anyway once it's saved).
i went into "Advanced..." and, to preserve the dimensions and the HD, i unchecked "Resize Video", chose "Same as source" for the frame rate, and checked 2 "Encoding Passes" (just in case).
for some reason, everytime i click the "save" button, it asks what i want to call these settings. if i use the name i used for the same settings on the previous go-round, it says that that name is already used and (impliedly) can't be used again. so, i add the new date, and yet another name for the same settings gets added to the drop-down menu (odd).
once the compressed .flv file was saved, it was an easy upload to youtube.
btw, it seems that the Elements 7's Audio Mix defaults to 0 dB, OR whatever the setting was in the prior saved version, unless i use the mouse to continuously "ride the slider pot". that's ok for a 48-second video, but does anyone know of a way the dB can be set so that it just sits there, instead of moving back to where it previously was

I recently rebuilt my iphoto 09 library and now all the pics are in one folder instead of events. How do I get 20,000 pics back into the correct events?

I recently rebuilt my iphoto 09 library and now all the pics are in one folder instead of events. How do I get 20,000 pics back into the correct events?
I have a macbook pro Version 8.1.2 and I am using Iphoto 09
I rebuilt library because many pics were black and now they are in one folder labeled "Recovered"

Do you have the original iPhoto Library (before you rebuilt it)?
If so, I suggest you rebuild it using iPhoto Library Manager, a program you can download. It does a better job of rebuilding. It also leaves your original intact and makes the rebuilt Library a new file (package).
If you don't have the original (say, from a backup), then you should probably first back up the library that you have before trying anything.
After making a backup of it, look along the left side, you will see Events and Photos. Is there anything in either of those areas?
If not, it sounds like all your photos were recovered and put in Recovered during the rebuild. iPhoto Library Manager might do a better job with this. In any case, if there are no photos in Events or in Photos, try selecting ~ 5 photos in Recovered and drag them to Photos. Do they then show up there with the correct dates? Do they also show up in Events after doing that? I am suggesting just a few photos before you try it with 20,000.
If the photos inside your "recovered" area are also in Photos, then don't do the above steps. I'm not sure I can help you if your 20,000 photos are in Photos but not Events. I'd try iPhoto Library Manager instead with its better rebuild.
If the 5 photos experiment works, then I would try it with ~ 200 photos at a time, going through your entire collection. You'll need to do this about 10 times if you really have 20,000 photos. Remember, don't do this if the "recovered" photos are already in "Photos."

Best way to get already adjusted NEF photos into LR3???

Hi,
I am just starting to use Lightroom.
Now, my issue is how to get my old Photos into the Lightroom Database. The new Photos are no issue with as long as I get used to using Lightroom&Photoshop :-)
These "old" Photos have already been going through the adjustement process in Capture NX2. Lightroom and CaptureNX2 are saving the RAW editing in different positions. This leads to that the editing would be lost by importing them straightforward into Lightroom.
So, I do not want to perform the editing on thousands of Photos again. I do however want to get them into the Library Database of Lightroom.
My wish is to be able to see the Photos in some form ( JPEG??? ) as well as being in the database. Optimally the NEF should be connected to the view format.
My first thought was to convert the NEF to jpeg before importing them into Lightroom.
     Pros: The NEF and JPEG sticks together (jpeg as a hidden piggyback)
     Cons: I only see the NEF version and not the jpeg => "lost" the editing. I hoped to find a way to swap it around ( RAW as a hidden piggyback).
     Question: Is there anyway of swapping the piggybacking around?
An other suggestions are also welcome!
I assume that there are some others out there that have experienced that same issue and found a solution to it.
/Erik

I have used Nikon Capture NX2 quite a bit but am not using it anymore for the following reasons:
LR cannot read NX2-nefs; and NX2 cannot read LR's edits.
In my workflow I need LR and its image managing capabilities and its capabilities to sync multiple images fast.
After using LR since LR2, I am finding that LR 3 gives me all the editing tools that I need and I don't see any necessity to use NX2.
Sure, the U-point technology was great when nothing like that was available. But now I find that I can achieve the same results with LR's editing tools.
I would not want to have images on my computer that LR cannot read - or only if I create JPGs or TIFFs first, which just clogs up my hard drive with copies.
My advice would be: Learn to use LR's image editing capabilities - and particularly the local adjustments - and have all your images in LR.
If you have lots of images - as I do - to work with two different image editing softwares that cannot read each others edits is - in my view - a recipe for frustration and unnecessary work.
I love Nikon's cameras and lenses but for image editing LR is my choice.
BTW I am neither an Adobe employee nor do I own Adobe shares.
WW

I just purchase an IPhone5C to upgrade from my IPhone4, but I do not know how to get all of my photos that were on ICloud on my Photo Stream (875 photos), on to my new phone. I thought that since my 5C can see Icloud that all photos would be there...

I just purchase an IPhone5C to upgrade from my IPhone4, but I do not know how to get all of my photos that were on ICloud on my Photo Stream (875 photos), on to my new phone. I thought that since my 5C can see Icloud that all photos would be there... Can someone help me get the pics from my Iphone4 to the 5C?

Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there (subject to a 1,000 photo limit) until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device.

I have an old ipod and want to know how to get everything off it and into my iTunes library. My old computer died and the original library was lost, so don't have any of the content saved anywhere else.

I have an old ipod (it's the very thin oblong one in purple, the one before the one that does video) and want to know how to get everything off it and into my iTunes library. My old computer died and the original library was lost, so don't have any of the content saved anywhere else. I now have an iPhone 5S and listen to music on that, so want to be able to listen to things from the old ipod too.
Can anyone help please?
Thanks very much
Jane

Apple normally does not get involved in handling lost objects like this. Since a real name is not installed it will be much more difficult.
You can try contacting Apple support at the US number, assume you are US going to BWI from the listing: http://support.apple.com/kb/HE57 and explain the situation and see if they offer any suggestions.

I just ripped quite a few music albums. How do I know if they went into the cloud, and if they did not, how do I get them into the cloud

just ripped quite a few music albums. How do I know if they went into the cloud, and if they did not, how do I get them into the cloud

I assume you have iTunes Match turned on in iTunes?
You can create a smart playlist in iTunes that has "iCloud Status" is "Matched" or "Upload" - that will tell you what's in the cloud.

How to get System status Check Boxes into Query selection screen

Dear experts,
Pleas help in knowing how to get System status Check Boxes into quick view query (SQVI), selectionscreen.
Regards
Jogeswara Rao
Edited by: K Jogeswara Rao on Jul 6, 2010 7:26 PM

Problem solved through other Forum
(Checkboxes not possible, some alternative solution to my requirement found)

How do I merge new imported photos into an existing event?

How do I merge new imported photos into an existing event while using the latest version of iPhoto?

You can merge two Events simply by dragging one to the other.
You can move photos between Events by drag and drop or by first flagging them, then switching to Events View and selecting the target Event and going Events Menu -> Add Flagged Photos to selected Event.

How to get BW-BPS variable value into Visual Basic?

Hello,
Scenario:
Time characteristic 0FISCYEAR has a variable ZVFYEAR. In layout this time characteristic is defined as DATA COLUMN. When user changes VFYEAR variables value i want to get the value of variable into Visual Basic and to format header for table in the layout.
How to get BW-BPS variable value into Visual Basic?
Could you help me?
Thanks in advance.
Best Regards,
Arunas Stonys

Hi,
If i understand your requirments correctly ,you need to read the value of the Variable and Put it on the layout. Here is how i would solve this,
Read the value of the variable using an ABAP program.The logic for this would be to read the variable value and post it on the layout on a cell.You can do this by calling the ABAP program on opening the layout.this can be done using LB_EXIT_FM T-code. Now using the SAP delivered SAPAfterDataPut macro, read the cell in which you have placed the variable values and assign it to the necessary values you want to on the layout.All this will be done before the layout opens.
Hope this helps.
regards
Sai Vishnubhatla

HT201317 When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

How to get a person's photo into the column of messages in Mail?

Similar Messages

Maybe you are looking for