How to get a replacement mounting materials for a A1347 Mac Mini HD

Hello,
I have purchased two Unibody Mac Mini's (A1347) on eBay (one 2010 and one 2011) and both have had the hard drives removed. Now hard drives are easier to replace, but the Unibody Mac's require a rubber or plastic cover and two mounting screws. A good picture of both can be found here:
https://www.ifixit.com/Guide/Mac+Mini+Mid+2010+Hard+Drive+Replacement/3113#s1548 1
My question is, is there an Apple replacement part that contains the cover and two screws? Has any one come up with a good working alternative? I guess if I could find the screws I could use a solid state drive since that wouldn't short on on the case (I think). It really seems like a shame to have these Mac's be useless because of some rubber/plastic and a few screws. This has to be something that an Apple tech runs in to occasionally (said he hopefully). Any input would be greatly appreciated, especially an Apple part number
I've thought of using anti-static bags, but I'm not sure if it could withstand the heat. And then there's the screws/
Thanks,
Jason M.

So you're saying the cover only needs to be on one side, even though the Apple cover goes over both. Okay, that makes sense -- the circuit board for the drive is only on one side.
As for the plastic, would blister pack work?
Thanks for the help,
Jason M.

Similar Messages

Where can I get a replacement power cord for my 13" Mac book, Where can I get a replacement power cord for my 13" Mac book

Where can I get a replacement apple charger/power cord for my 13" Mac book?

here are some examples: https://www.google.com/#q=macbook+magsafe+adapter&hl=en&prmd=imvns&source=univ&t bm=shop&tbo=u&sa=X&ei=i6nhTrvTO6q22gWIpuTcBA&sqi=2&ved=0CHkQrQQ&bav=on.2,or.r_gc .r_pw.r_cp.,cf.osb&fp=e0f7ed75ce37ea0c&biw=1280&bih=679

How to get Bluetooth Audio gateway in Windows 7 on Mac Mini?

I just bought the 2012 2.3 GHz Mac Mini
I have installed windows 7..
I also installed Broadcom 6.0.2 driver that supports Bluetooth audio gateway , but it keeps saying Bluetooth device not found, where as the Mac mini has an inbuilt 4.0 bluetooth ready!
How do I get the bluetooth audio gateway to work??
I use bluetooth headsets of Motorola to answer Skype calls..
Please help me..
Thanks

The GUI version of Disk Utility is very limited in what sort of RAID configurations you can create. It will only allow you to have a single partition on the disk and to make a RAID using that.
Boot Camp requires creating additional partitions on the disk and hence it complaining.
There is a commandline version of Disk Utility called diskutility (duh!). It has far more options available. Details for this command can be obtained by typing man diskutility in Terminal.app.
It appears that in theory you might be able to do the following.
Start off with both disks not setup for RAID
Use Boot Camp to create the Windows partition. Repeat this on each disk.
Then in Terminal.app manually convert the boot Mac partition to a RAID using diskutil appleraid enable
Then add the matching partition on the second drive to make it a working mirror using diskutil appleraid add
Then in Terminal.app manually create a RAID for the Windows partition using both drives and use FAT32 as the format using diskutil appleraid create
Then boot and run the Windows installer and tell it to erase the Windows partition as NTFS
I cannot gurantee the above will work and you should obviously have backups if needed. Another option would be to have the Mac partition covered by RAID but not the Windows partition, this would result in three volumes one Mac RAIDed volume, and two other non RAIDed volumes even though you have two physical disks.

Where can I purchase a replacement power cord for my mid2010 mac mini?

I cannot seem to find it in the store.
Also, would it be unsafe to keep the cord plugged it but disconnected to the mac mini itself?

The Mac mini 2010 and 2011 models use a standard IEC C7 type power cable. This is sometimes described as a 'figure of eight' type connector.
See this link for some examples. In this case there is nothing specially Apple about the cable.
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Delectronics&field-keyw ords=iec+c7
Having the cable plugged in to a wall outlet but not a device at the other end is not desirable. While there are no bare metal contacts to touch, if it was fiddled with by a child, or dropped in a liquid bad things could happen.

How to get the wi fi working again on the mac mini os 10.9?

Hello,
I"ve had the computer for a year and this is the first problem I"ve had with the wi fi. I used another device in my house and my comcast wifi works fine. I ran network diagnositics and it said its fine but no web pages or web apps will load.
If someone could offer some advice that'd be great.
Thanks.

Hello,
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x,/10.9 instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

How to get the list of materials from Sap r/3

Hi Experts,
I have one doubt, here iam implementing
HTTP TO RFC scenario.
My doubts are------
1. Should we create DT MT MI and all (OR) not
2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).
3.Or the second thing is how to get the list of materials start with some alphabate.
Please reply me for each and every questions mentioned above. Please clarify me.
Helpful answers wil be rewarded.
Reagards
khanna

Hi Khanna,
 1. Should we create DT MT MI and all (OR) not
 Yes U need to create for HTTP site...for RFC U need to import..
2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).
 You create your own structres for Request and respoce.. and Map it with RFC..
3.Or the second thing is how to get the list of materials start with some alphabate.
 I think it will come with acending order....
for more help go through this link
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
regards,
Ansar.

How to get the "last changed by" for a set of function modules?

How to get the "last changed by" for a set of function modules?
is there any table to get it??

See [this|Re: Date of creation of function module] I posted earlier.
>TFDIR will give you the name of the function group program and the include number.
>E.g. SAPLZFUNCGROUP Include 01.
>From this you can construct the include name: LZFUNCGROUPU01.
>You can look this up in TRDIR to find the creation date (CDAT) of the function module.
In your case, you need unam and udat.
matt

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

HT4859 I used a purchased program iannotate to download, highlight and store many documents. My ipad is brocken and I m ahtinking of getting it replaced by Apple for a payment of 240 or so. Is there a way to make sure that I do not lose pdf documents in i

I used a purchased program iannotate to download, highlight and store many documents. My ipad is brocken and I m ahtinking of getting it replaced by Apple for a payment of 240 or so. Is there a way to make sure that I do not lose pdf documents in iA?

I am sorry that you don't find the answer to be correct. In THIS forum, telling you that you are in the wrong forum, and suggesting where to post for correct answers, or indeed any support, IS the answer.
I'm also sorry that you purchased a phone that you are having trouble with. If the vendor cannot help you (HTC), and the eBay seller cannot help you, then you really do need to either follow up with the forums Ken suggests, or the HTC forum, or with eBay.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog:http://unlockpowershell.wordpress.com
My Book:Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

Macbook hard drive crashed, i lost windows for mac, bought a disc when i got the mac, no longer have the disc, need my apps, don't wanna pay for it again. know how to get it quick without having to give my mac to the genius bar at apple store overnight

macbook hard drive crashed, i lost windows for mac, bought a disc when i got the mac, no longer have the disc, need my apps, don't wanna pay for it again. know how to get it quick without having to give my mac to the genius bar at apple store overnight?

What is it you need - Windows installer disc or something else? Your question is unclear. Could you be more specific?

How to get calender in f4 help for select options in module pool (URGENT)

Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amruta

Hi Amruta,
First of all, you can not create select-options directly in module pool.
For creating select-option is dialog prog follow these steps:
1. create your selection screen model as subscreen by:
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.
PARAMETRS: P_MATNR LIKE MARA-MATNR.
SELECT-OPTIONS: S_BISMAT FOR MARA-BISMAT.
SELECTION-SCREEN END OF SCREEN 2000.
2. create a screen ( example 100 ) in your module-pool dedicated for selection-screen. on this screen layout sketch a sub-screen name like subscree_2000.
3. write this bit of code in PBO and PAI of the screen 100;
CALL SUBSCREEN SUBSCREEN_2000.
4. include this code in PBO:
INCLUDING SY-REPID '2000'
6. write user_command of PAI, call screen which is going to executable after selection-screen.
5. create a transcation for this dialog module pool with screen 100.
6. execute this transaction and you can see it's behaving like cool with select-options.
After that in [bprocee on value-request], use F4_DATE for both from and to option field.
Hope it will solve the problem.
Regards
Krishnendu

How to get the restriction pass code for iPhone ?

How to get the restriction pass code for iPhone ?

if you forgot it you have to restore your phone to get past that code

How to get and download adobe illustrtor for iMac os x 10.7

how to get and download adobe illustrtor for iMac os x 10.7

www.adobe.com would be a good place to start. You can also visit Apple's Online Store to see if you can order from there. Google search for other vendors.

Have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for

have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for her iphone. we need to save her photos, music, etc to ? icloud and the phone stuff to verizon cloud? so when she gets her new Iphone6 she can have all her "stuff" back on the new phone. hope this makes sense. please offer suggestions here or at [email protected] thanks for your help!

Oh no! I'm sorry to see there's a lot of confusion here and data shared, x-rayDon. We can definitely work to fix. This happens when two devices share the same Apple ID, so she will need to reset hers. She can do so by assessing this link Apple - My Apple ID. You will need to decide who will keep the account if want separate Apple IDs since purchases cannot be shared unless you do Family Sharing.
RobinD_VZW
Follow us on twitter @VZWSupport

How to get a replacement mounting materials for a A1347 Mac Mini HD

Similar Messages

Maybe you are looking for