How to get a valid IPCKEY for our UBBCONFIG (Window 2000) ?

Hi everybody,
I am trying to install Tuxedo 8.0 to run the simpapp sample.
I have set all the environment variables and now I am trying to
find a correct IPC KEY for the UBBSIMPLE configuration file.
I just tried the TMLOADCF -c UBBSIMPLE command to find out a minimal value for this
variable.
Here is what I get :
Ipc sizing (minimum /T values only) ...
Fixed Minimums Per Processor
SHMMIN: 1
SHMALL: 1
SEMMAP: SEMMNI
Variable Minimums Per Processor
SEMUME, A SHMMAX
SEMMNU, * *
Node SEMMNS SEMMSL SEMMSL SEMMNI MSGMNI MSGMAP SHMSEG
JELALANNE 35 5 30 A + 1 22 44 385K
where 1 <= A <= 8.
The number of expected application clients per processor should
be added to each MSGMNI value.
So the value SHMMAX*SHMSEG=385K ...!?!?
What can I do with this value to find out that one of IPCKEY ???
Thank you in advance for your help
Best Regards
Jean-Guillaume LALANNE
[email protected]

These values have nothing to do with the IPCKEY, which is just a unique
number that you choose.
jeangui wrote:
>
Hi everybody,
I am trying to install Tuxedo 8.0 to run the simpapp sample.
I have set all the environment variables and now I am trying to
find a correct IPC KEY for the UBBSIMPLE configuration file.
I just tried the TMLOADCF -c UBBSIMPLE command to find out a minimal value for this
variable.
Here is what I get :
Ipc sizing (minimum /T values only) ...
Fixed Minimums Per Processor
SHMMIN: 1
SHMALL: 1
SEMMAP: SEMMNI
Variable Minimums Per Processor
SEMUME, A SHMMAX
SEMMNU, * *
Node SEMMNS SEMMSL SEMMSL SEMMNI MSGMNI MSGMAP SHMSEG
JELALANNE 35 5 30 A + 1 22 44 385K
where 1 <= A <= 8.
The number of expected application clients per processor should
be added to each MSGMNI value.
So the value SHMMAX*SHMSEG=385K ...!?!?
What can I do with this value to find out that one of IPCKEY ???
Thank you in advance for your help
Best Regards
Jean-Guillaume LALANNE
[email protected]

Similar Messages

  • Does anybody know how to get a scroll bar for a long list of podcasts when selcting some for sync? Thanks

    Does anybody know how to get a scroll bar for a long list of podcasts when selcting some for sync? Thanks

    Hi lbadek
    I can help with this please send us an email using the contact the mods link in my proifle and we will investigated from there.
    Thanks
    Stuart
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • How to get the last error for while loop?

    How to get the last error for while loop? I just want transfer the last error for while loop, but the program use the shift register shift all error every cycle.

    What do you mean by "get" and "transfer"?
    If the shift register is not what you want, use a plan tunnel instead.
    Typically, programmers are interested in the first, not last, error.
    Can you show us your code so we have a better idea what you are trying to?
    LabVIEW Champion . Do more with less code and in less time .

  • How to get title templates library for CC?

    How to get title templates library for CC?  Do you have to download and install PP 6 to get them?

    Try here Library, title templates, template projects missing: Premiere Pro, After Effects, Encore

  • How to get balance sheet report for profit centers

    hi
    how to get balance sheet report for profit centers, is there any transcation code to get that report or i need to create a report painter report for this

    Hi,
    You can use T. code KE5Z for actual line items.
    More to this you can use program RFBILA10 (Use T. code SE38 and program RFBILA10) for complete blance sheet.
    The transaction is for special purpose ledger but this program RFBILA10 can be used for profit center balance also.
    In selection, you can give ledger name which is generally 8A for profit center ledger.
    Reg

  • I went to add my iPod to another computer and when I did it re-bought all of my music and I would like to know how to get my money back for it?

    I went to add my iPod to another computer and when I did it re-bought all of my music and I would like to know how to get my money back for it?
    anyonr know how I can get my money back????????

    Go to Settings>General>Reset>Erase all content and setting. Then re-setup the iPod with your account/media. To redownload iTunes purchases see:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How to get 64 bit version for premiere elements 12

    How to get  64-bit version for Premier Elements 12 ? 
    I download from ADMISY site.
    Click on win 64 bit and download it.
    When I try to install ther is a error  this download version is not for 64 bit I have try many times but same result

    Hello
    I have been away some days
    ADMISY is a software partners for Adobe
    I running Win 7 Home Edition
    I have received a card with a code when I bought the program and the I
    download from ADMISY
    Sending serial and installation warning
    PhotoshopElements_12_WWEFDJ.7z
    PhotoshopElements_12_WWEFDJ
    PremiereElements_12_WWEFDJ_win32.7z
    PremiereElements_12_WWEFDJ_win32
    I can not find a 64 bit version of 32-bit or 64-bit version of downloads
    This is information I have
    Best regards
    Erling Magnusson
    2015-02-04 22:33 GMT+01:00 Adobe Forums <[email protected]>:
        How to get 64 bit version for premiere elements 12  created by A.T.
    Romano <https://forums.adobe.com/people/A.T.+Romano> in *Premiere
    Elements* - View the full discussion
    <https://forums.adobe.com/message/7162950#7162950>

  • How to get the depreciation areas for an asset in particular period

    Hi frndz,
      how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
    Thanks and regards.
    Harisumanth.Ch

    Try table ANLB, then read ANLC.
    Regards.

  • How to get the version no. for service po?

    Hi,
    How to get the version no. for service po?For material po we are getting the version from EKKO-REVNO but for service po Ekko-revno is blank.
    Regards,
    Rachel.

    Hiee,
    It is not like service PO does not have revision.
    REVNO will only exists for any document if amendment is made after releasing it. If in EKKO for all service PO revision number is blank then test if version management is active for document type
    MM->Purchasing->Version management -> External documents
    Here check for your doc type and purchase org version management is active.
    Regs,
    Appie

  • How to get the owner name for the file in ftp using abap ?

    Hi folks ,
    How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
    but doest work out me . Helping in this regard highly appreciated ...
    Thanks and regards,
    Swarupa Vanarchi

    Hi
    dont you  have used the os user while calling the FTP_CONNECT FM?
    Hope you are not talking about the user executing the FTP program.
    Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
    May be i am going too far with if and elses here as your question possesses no  clarity.
    Plz elaborate your requirement  before anybody can help.
    Regards
    sateesh

  • How to get count of rows for a table?

    Hi,
    How to get count of rows for a table and secondly, how can i have access to a particular cell in a table?
    Regards,
    Devashish

    Hi Devashish,
    WdContext.node<Your_node_name>().size() will give you the no: of rows.
    This should be the node that is bound to the table's datasource property.
    WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value); will select the row at that particular index.
    You can access an attribute of a particular row as
    WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value).get<attribute_name>();
    Hope this helps,
    Best Regards,
    Nibu.
    Message was edited by: Nibu Wilson

  • How to get the document number for a ware house order.

    Hello gurus,
    how to get the document number for a ware house order. [if GI is posted refering that WH order] .. is there any report?
    Thanks in advance

    There are several options.  When you post a Goods Movement, you can use LB12 -display Transfer Requirement for material document or LB11 Display TR for material.
    Depending on how your system is set up you may have gotten a Transfer Order automcatically.  In this case you can look at LT24 - Transfer Order for material.

  • How to get a organization name for a particular user using API's

    Hi alll,
    How to get a organization name for a particular user using API's

    You need to do something like this:
    SearchCriteria criteria = new SearchCriteria("User Login", "XELSYSADM", SearchCriteria.Operator.EQUAL);
                   UserManager usrService = oimClient.getService(UserManager.class);
                   Set<String> retAttrs = new HashSet<String>();
                   retAttrs.add(UserManagerConstants.AttributeName.USER_ORGANIZATION.getId());
                   List<oracle.iam.identity.usermgmt.vo.User> users = usrService.search(criteria, retAttrs, null);
                   System.out.println("ORG KEY :: " + users.get(0).getAttribute("act_key"));

  • How to get mobile model name for different types mobile devices

    Hi,
    I have checked few thread in this forum about getting mobile model name at server. So far, i noticed the mobile name is set manually in the midlet as user-agent .
    HttpConnection connection = null;           connection = (HttpConnection)Connector.open(url);          connection.setRequestMethod(HttpConnection.POST);          connection.setRequestProperty("User-Agent","Nokia7110 Profile/MIDP-1.0 Configuration/CLDC-1.0");
    i retrieve the header information from servlet like below :-
    String userAgent = request.getHeader("User-Agent");
    How to get mobile model name for different model devices , not by manually adding the model name in midlet?
    Thanks in advance :-)

    Hi,
    In J2ME there is no method to get the model number from the device. how ever you can use the APIs provided by the device manufacturer if available. But still the APIs will not work with devices from other manufacturer or sometimes it will not work with the devices of the same manufacturer if the API is not supported. so it is better to send the device model name through the header.

  • How to get/view document number for KP06 Planning upload

    Hi,
    I have uploaded excel for Cost center/cost element Planning in KP06 using exccel planning.Now i want the document number which for which i have posted in KP06-Plan values using excel upload.
    Kindly advice me how to get the document number for CO-OM(Cost center/Cost element planning) in KP06?
    Thanks
    Supriya

    Hello,
    Please execute report KSBL. It should be useful.
    Regards,
    Ravi

Maybe you are looking for

  • How to undelete icloud on my macbook.

    hi, all my contact is gone on my adress book from my mac. And when i ask to synchonize with my iphone or ipad,... he says already synchonizeby icloud. how can i undelete this function. thanks

  • My Powerbook G4 refuses to recognise it's battery.............

    My powerbook refuses to recognise that it has a battery installed. Naturally this happened just weeks after the extended warranty ran out! The battery icon on the top right side of the toolbar has a cross in it and yes, I have checked it with another

  • Badi for release for purchase order.

    hi all, in me28->release (approve) purchasing documents->release purchasing document..there u have a button (release+save ) button   i want to enhance at that pointi.e when u select the po no and click the button,automatically trigger an email to the

  • Is DFS Initial Sync actually getting anywhere?

    Hi, The other day i had to recreate our DFS name space and replication.  One of the servers is running an initial sync and has been for around a week and a half.  How long is this supposed to take?  Its 2tb over a 10mbps leased line so not that fast,

  • How to synchronized two Timer Task ?

    I need to execute 2 job job1 every sec job2 every min when one task is executing other task should wait so i created 2 timer timer1 will execute secjob every sec timer2 will execute minjob every min and one job object with synchronized execute method