How to get a Wireless connection from house to car...

Hi I have a new BT Broadband hub in my house, I want to be able to use the wifi from this in a caravan in my garden about 30 metres away so a tablet can be used in there. Does anyone know how I can do this? the walls in the house are 2ft thick so unless I hang the router out of a window in a plastic bag I cannot get a wifi connection in the caravan.
thanks
Quembers

The BT Shop have some solutions.
http://www.shop.bt.com/learnmore/bt-branded-products-and-services/bt-connectivity-devices/
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

How to share mobile wireless connection from Win XP to mac?

Hi,
I have two comupters,one mac and one PC (win XP). I am trying to share the mobile wireless broadband from my PC to the mac. I set up the sharing from mac to PC successfully quite a while ago, but now I need to work extensively on mac. So I tried to set up the sharing in the other around and nothing worked at all. Here is what I did.
1. I enabled the sharing of the mobile wireless connection on PC.
2. I tried to set up a small/home network, but it didn't work on Mac as the windows softwares can't be run on mac
3. I also tried to set up a peer-to-peer connection from PC to Mac which also didn't work.
Does anyone how to do the sharing from PC to Mac? Thanks a lot!

Okay, firstly some routers or mdoems come with 2 ports on the back so you can connect two different computers so simply plug them both in
if not, then i advise you buy a router which allows you to add numerous computers to the same network via wires or add numerous computers wirelessly
i have one computer connect to my netgear router -wired
i have one computer wirelessly connected with a Netgear USB wireless reciever
then i got my laptop which is connected via wireless
i have xbox live which i connect to the internet via my laptops wireless connection, this can be done with any pc or laptop aswell
what you do is
wireless networks - where it showws any detected networks
change advanced options - on the side
advanced tab
then allow other computers to use this computers internet connection
simple as
all you do is plug in your other pc or whatever

How to get a db connection from jdevelopers created db connections

How can you use the connection you create with jdevelopers wizard, to execute a simple preparedStatement in a custom class?
After use, how do you return/disconnect it?
con = ??
stmn = con.prepareStatement("SELECT first_name "+
"FROM customers "+
"WHERE cust_id = ? ");
stmn.setInt(1, custId);
ResultSet res = stmn.executeQuery();
Thank You

A connection OracleDBConnection in Connections-Navigator is available as a data source jdbc/OracleDBConnectionDS. To obtain a connection from the data source, add a resource-ref element to the web application in which a connection is to be obtained. In a Servlet or JSP application a connection may be obtained with the data source JNDI.
InitialContext initialContext = new InitialContext();
javax.sql.DataSource ds = (javax.sql.DataSource)
initialContext.lookup("java:comp/env/jdbc/OracleDBConnectionDS");
java.sql.Connection conn = ds.getConnection();

How to get and use connection from Web AS 7.0 pool?

Hello!
I've set up a datasource and connection pool in my Web AS according http://help.sap.com/saphelp_nw70/helpdata/en/c0/3ad4d5cdc66447a188b582aad537d3/frameset.htm
And I have some questions about using connection pool:
1) here is my code which get connection form pool:
InitialContext ctx = new InitialContext();
DataSource datasource = (DataSource) ctx.lookup("jdbc/IndexesDataSource");
Connection con = datasource.getConnection();
return con;
Does it properly?
2) Which method I should call when I need to pass connection back to the pool? Will it be enough to call con.close()?
regards, Lev

Hi Lev,
Write code like this
try{
InitialContext ctx=new InitialContext();
DataSource ds=(DataSource)ctx.lookup("jdbc/indexsDataSource");
Connection con=ds.getConnection();
Statement stmt=con.createStatement();
con.close();
catch(Exception e)
wdComponentAPI.getMessageManager().reportException("Exception "+e,true);
also have a look at below links[Link|http://help.sap.com/saphelp_nw04/helpdata/en/61/fdbc3d16f39e33e10000000a11405a/frameset.htm][Link1|http://help.sap.com/saphelp_nw04/helpdata/en/46/ddc4705e911f43a611840d8decb5f6/frameset.htm][Tutorial|http://help.sap.com/saphelp_nw04/helpdata/en/91/9c2226df76f64fa7783dcaa4534395/frameset.htm]
Regards,
Krishna kattu

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

Yes, I did try to go on my settings>wifi and was waiting for any wifi signals to pick up, but nothing shows up. But on my PC I get a whole list of networks to choose from. Regarding my neighbor, I already have her password that is why I was able to get it on my PC, the problem is that the mini Ipad is not picking any signal neither can it locate me when I go to maps.

How to get the Database type from weblogic Db connection

I want to use database version control in my application . that means different database type use different Sql Statement. Such as in weblogic7.0 if I create SqlServer JDBC pool then I will use some special Sqlserver sql Statement . such as some join statement. If I create Oralce JDBC pool then I have to use different Sql statement . because these two database support different Sql statement.
What my question is how to get the database type from the connection.

For a normal jdbc driver you can use
Connection.getMetaData()
To get the meta data, in particular the getDatabase...() methods.
That might or might not work.
However, at the very least in the server you have access to the weblogic properties so you can parse the pool property to figure it out.

How to get RMAN catalog information from Target database?

Hi,
How to get RMAN catalog information from Target database because i don't know about catalog database? is it possible?
Thanks

If you run RMAN backups of a target database using a Catalog schema in another database, the target is not aware of the catalog.
The RMAN backup script would have the connection identifier for the Catalog.
Hemant K Chitale

New Netgear Router and now I can't get a wireless connection for my K5400 printer.

I got a new Netgear Router and now I can't get a wireless connection on my Officejet Pro K5400 printer. Anyone know what I can do to fix this. Using Windows XP

On the printer: Setup > Network > Restore Defaults. From the same Network menu, run the Wireless Setup Wizard.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

How to get the return values from a web page

Hi all :
how to get the return values from a web page ? I mean how pass values betwen webflow and web page ?
thank you very much
Edited by: jingying Sony on Apr 15, 2010 6:15 AM
Edited by: jingying Sony on Apr 15, 2010 6:18 AM

Hi,
What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
Regards,
Karri

How to get warranty service claim from nokia c5-03...

how to get warranty service claim from nokia c5-03 in india because i have problem with nokia c5-03 I Purchase 2 week ago a new nokia c5-03 but from day 1 i facing same problem like 1) app close itself 2) internet browse close if any thing is downloading or downloading over 3) memory full always then i should reboot the phone then it work. 4) ovi map is open it shows memory full close the app So kindly help me how to get warranty service claim from nokia c5-03 in india i am unhappy with nokia c5-03
Solved!
Go to Solution.

i updated software also but the same problem cont... I want to know that nokia will give back money or exchange for other new mobile

Problem in getting the database connection from a connection pool

Hai All,
I am facing a problem in getting the database connection from a connection pool created on weblogic server 8.1.
I am using the Oracle database 8.1.7.
I have configured my connection pool, datasource and JNDI in weblogic.
In my java program i have the following code to retrieve the connection.
import java.sql.*;
import java.util.Hashtable;
import javax.naming.Context;
import javax.naming.InitialContext;
class jdbcshp1 {
    public static void main(String[] args) {
     Connection connection = null;
     try {
           Hashtable ht = new Hashtable();
           ht.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory"); // Wanna get rid of this.
           ht.put(Context.PROVIDER_URL,"t3://localhost:7001"); // wanna get rid of this.
           // Get a context for the JNDI look up
           Context ctx = new InitialContext(ht);
        javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup ("myjndi1");
          //Create a connection object
          connection = ds.getConnection();
     The above code is working fine but, the two ht.put statements are creating problem.
The problem is, after converting the application into WAR file it can be deployed
on any machine or different port on same machine. My application fails if its deployed on
weglogicserver which is at different port.
Is there any way that i can get rid of those ht.put statements or any other way to solve the problem.
any help is appreciated.
Thanks in advance
Pooja.

Hai All,
Firstly, thanks for ur reply.
Even i have seen some code which uses context constructor with out any parameter and works fine.
i dont understand why its not working for my code.
When i remove those ht.put code and use context constructor with out any parameter, it giving an error.
Context ctx = new InitialContext();
javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup ("ocjndi");
connection = ds.getConnection();The error is as follows:
javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
the above error is forcing me to include those code but if the port number is changed the code will not work. Plz let meknow if some setting have to be made.
I appreciate all ur valuable help.
Thanks once again.
Pooja.

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

contact itunes support

How to get the current week from sysdate?

Hi sir,
i want to know how to get the current week from sysdate?
thanks

Hi Nicolas
It seems you like to check my post and also make commend ;) thanks for your attention
Have you ever read the posts above and given solutions ?Yes, I did
Have you read the docs ? Yes, I checked
What's the added value here ?Did youYou shared doc with solution(long one), I shared short one which point same solution(Check what Joel posted)..So what is benefit, As you can guess oracle docs are sometimes become so complicated as specialy for beginner...(At least it was like that for me and Belive me somedocs are still sooo complicated even for oracle coworkers ) But for you I dont know ;)
=> Why writting the PS in bold ?Why.. Let me think... Ohh Maybe I am looking some questions(many) and even user get answer they should not changed status so I am reading some posts and try to get problem and loosing time..
So I am putting that PS wiht BOLD because I dont wanna lose time my friend ;) Because While I am trying to help ppl here In same time I am trying to giving support to my customer prod systems. Which mean time is very important for me...
Hope my answer could satisfy you..
One important PS for you.. You may not like my posts (or someone) but my friend I become tired to read&answer and make commend to on your comment which is about my posts.
I am not newbie in forum(At least I fell like that) and I belive I know how I should make post..
Thank you
Regards
Helios

How to get a Wireless connection from house to car...

Similar Messages

Maybe you are looking for