How to get ABIF to post only to leading ledger ???

Hi,
I have set up the investment support measure (valuation area 51) and don't know how to restrict it only to one ledger (leading one).
As it stands today ABIF is going to leading and non leading (local gaap).
I have defined the depreciation area 51 to post only to leading ledger for the depreciation run and it is posting only in that ledger.
However transaction ABIF post to both ledgers and so my question is what do I need to do to have ABIF post only to the leading ledger rather than posting to both???
Tks

Restricting Area 51 to post it to leading ledger does not mean that it will not flow into non-leading ledger. All the transactions except depreciation postings flows from leading to non-leading. This is std. SAP. You might want to post a ledger specific entry to your non-leading ledger and reclass the amount which is posting from Area 51 (flowing from leading to non-leading) to a different GL account so that it does not show up in your balance sheet or whatever reporting you are using.

Similar Messages

Acquisition posting only in leading ledger

Dear experts,
I am working with new GL and I create the leading ledger and more two non-leding ledger. I´d like make an asset Acquisition posting only in leading ledger.
I create a group ledger only with the leading ledger and assigned it to the depreciation area but the acquisition is still being posted in all non-leading ledger.
My questions are: Is it possivel to make the acquisition post only in leading ledger ? How ?
Best regards

Hi Renato,
Yes, I understood your question.
Let me explain:
1) First make a normal posting with a normal transaction type. You can use any of this transaction codes for example ABZON.
All values posted into the leading ledger 0L has to be posted in all other ledger groups.
Example:
Real Posting to G/L Ledger
Area..01..X..1..0L
Area..15..X..3..TL
Area..16.....6..TL
2) The correction posting has to be done with a TTY restricted on non leading ledger(s). The idea behind: Because of the fact that posting to the leading ledger, results in posting to all ledgers you have to make a second posting to clear all other ledgers.
- Please copy the transaction type from the first posting
- Limit this transaction type to post to all ledgers expect 01 and parallel areas.
- Set the sign ANSHKZ from S to H
Regards Bernhard

How to get the list of only installed bundled application on mac os X through programmatically???

how to get the list of only installed bundled software on mac os X through programmatically???

I think what you get is below;
App Store
Calculator
Calendar
Contacts
Dashboard
Dictionary
DVD Player
FaceTime
Font Book
Game Center
Image Capture
iTunes
Launchpad
Mail
Messages
Notes
Photo Booth
Preview
QuickTime Player
Reminders
Safari
Stickies
System Preferences
TextEdit
Time Machine
Twitter
Activity Monitor
AppleScript Editor
Audio MIDI Setup
Bluetooth File Exchange
Boot Camp Assistant
ColorSync Utility
Console
DigitalColor Meter
Disk Utility
Grab
Grapher
Keychain Access
Migration Assistant
Network Utility
RAID Utility
System Information
Terminal
VoiceOver Utility
X11
XQuartz
Note if you buy a new Mac with ML preinstalled the list may be larger.

How to get folder(directory path only not file path) from local file system

Hi Firends,
How to get folder(directory path only not file path) from local file system , whenevr i will click on browse button.
Please give reply for this one , if anybody knows.
Thanks,
Anderson.

Hi Anderson,
if you're using flash.filesystem.FileReference - then it is run in black box - except of filename, size and creation data (and few other properties available after some operation succeeded). This is part of security features in Flash runtime (described in header section):
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/FileReference .html
This for example implies that user can download a content to local machine - but that content cannot be loaded back into Flash runtime. For this you would need either Air runtime flash.filesystem.File:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/filesystem/File.h tml
(so you would created Air runtime based application: desktop or mobile but not web, even as standalone project) or you would need one of 3rd party tools that add file access/file information features to standard Flash runtime applications converted to standalone native applications.
hth,
kind regards,
Peter

FC valuation not getting posted to non-leading ledger

Hi Gurus,
I need your help to resolve the following issue. We have a company code with 1st LC as EUR and 2nd LC as USD which is group currency. We have valuation area V1 assigned to the ledger group that has set-up for postings to both leadine (0L) and non-leading ledger (Z1). When I am trying to run FC valuation using transaction FAGL_FC_VAL, the valuation document gets posted to leading ledger only. There is no posting to non-leading ledger. The other ledger tab is missing in the GL view of the document confirming that the posting happened in the leading ledger only.
I have gone over lot of threads in the forum but could not figure out the issue. I would really appreciate if someone can guide me to resolve this issue.
Thanks,
Shalu

Hi Shankar
Thanks for your reply. Yes, the non-leading ledger is active and has been assigned properly to the ledger group. The set-up is working fine for all company codes except one company code. In our set-up, for all company codes, we are using a valuation area V1 with always evaluate as valuation menthod and CC curency as currency type and Group currency as additional currency. We were having some valuation issues with one company code with existing set-up as Local currency 1 was different from LC2. In order to fix that issue, I created new valuation area V3 with same valuation method and currency type but no additional currency. The ledger group and assignemnts were same. The original issue with curency valuation got resolved but the new issue appeared that the posting is happening only in the leading ledger and nothing for this company code is getting posted to non-leading ledger while running transaction FAGL_FC_VAL.
If I manually force the currency in F-02 in this company code, the posting does happen to the non-leading ledger. The issue is with automatic postings only using area V3.
Please help.
Thanks,
Shalu

How to get the ACCOUNTING_FLEXFIELD Name in a Multi Ledger Instance?

Hi,
How to get the <ACCOUNTING_FLEXFIELD> Name in a Multi Ledger Instance from logged-in Responsibility? Is there any profile option available?
SELECT id_flex_num
INTO l_structure_num
FROM apps.fnd_id_flex_structures
WHERE ID_FLEX_CODE = 'GL#'
AND ID_FLEX_STRUCTURE_CODE=<ACCOUNTING_FLEXFIELD>;
Tx

SMOD->SEUED001->Display componens->double click on EXIT_SAPLEDITOR_002->See the source code...
function exit_sapleditor_002.
*"*"Lokale Schnittstelle:
*"       IMPORTING
*"             VALUE(PROGRAM) LIKE SY-REPID
*"       EXCEPTIONS
*"              CANCELLED
include zxseuu22 .
endfunction.
PROGRAM is the importing parameter for the function module.
matt

Foreign currency translation posting into Non leading ledger

Hi,
Is it possible to post Foreign currency translation into Non Leading Ledger? I have used the Tcode FAGL_FC_TRANS to post Foreign currency translation, but when i look into transaction data in FAGLFLEXA table, i can only see the posting into 0L (leading ledger). If it is possible to post into non leading leadger, could any one guide me how to do that.
Thanks,
Sabera

Hi,
Please find the below link it will help full for you,.........
define exchange rate types according to ledgers
Naresh

How to clear the open item for non-leading ledger?

Hi, Experts,
I have two valuation area VA001 and VA004 and two accouting principle GAAP and IFRS.
Then I assign VA001 to GAAP (post to leading ledger) and VA004 assgin to IFRS (Post to non-leading ledger "IF").
There are two ledger group ,one is 0L and the other is IF.
When i run TBB1, system generate 2 FI documentes.
Then I run F13E to clear the GL account, because some GL is open item management.
But only ledger 0L is cleared, the other non-leading ledger "IF" is not cleared.
I don't know is there any possiblity that system will clear open item for leading ledger and non-leading ledger together?
TKS a lot.

Hi Louise,
you do posting in TRM, but clearing is done in FI, so I moved the thread.
BR, Tomislav

Depreciation Posting to Non-Leading Ledger

In our client we have been set with the Book Depreciation posted to only Leading Ledger. And we ran the Depreciation for all the month from Jan to Aug for 2010.
Depreciation postings posted to only Leading Ledger. Now they want to post to both Leading and one more ledger. For future postings i configured to the Depreciation area to post to both these ledgers.
Is there anyway we could post the previous months Depreciation postings to other Ledger now. I have the document numbers which i need to post to Non-Leading ledger and all the details. I think posting manually through FB01L is not right method and will not allow us to do. Please advice me on this.

Hi,
check SAPNET Notes 987824, 1317485, 1455618 (T-code ABF1L). This allows you to post asset values only to non-leading ledger. Thus you can create an opening balance for your non-leading ledger.
best regards, Christian

Posting to Non leading ledger

Hi All,
IAS and Non leading 02GAAP ) and want to have postings in both leader from treasury.
I have already configured operating valuation area and postings are happening in leading ledger.
Now I want to setup a second valuation area for posting in non leading ledger.
Regards,
Andy

Hi Andy
Run Tcode: OADB to configure valuation area and choose non leading ledger to post.
You also can set up depreciation areas for parallel valuation using a wizard Tcode: OADB_WZ
Before you set up valuations area to post in non leading ledger, you should remember that updating the values to CO is possible only for values of the leading ledger, but not for values of the parallel ledger.
Kind Regards
Jandoval Nascimento

Posting in Non leading ledger .

Hi ,
I have posted a document in leading leadger and when I display docuemnt I can see cost centre and profit centre only in Leading ledger docuemnt .
I can can't see any acoount assignment in Non leading ledger why ?
please see attached docment in non leading ledger .

Hi Preeti,
Manikumar has indiated that you assign the scenarios to the Ledgers defined. The following scenarios are available, as you may know :
FIN_CCA
Cost Center Update
FIN_CONS
Preparations for Consolidation
FIN_GSBER
Business Area
FIN_PCA
Profit Center Update
FIN_SEGM
Segment Reporting
FIN_UKV
Cost of Sales Accounting
Whether the assignment is done for the Non-Leading Ledgers? Also include the versions for the Non-Leading Ledgers.
Also do the "Define and Activate Non-Leading Ledgers" step to activate non-leading ledgers for the company code.
Regards,
KBG

Why only one leading ledger?

Hi
I am aware that in new GL you can have only one leading ledger. you can have as many non leading ledgers. Only leading ledger values flows to CO.
what can be the possible reasons for the restriction of "only one leading ledger"???
thank you in advance
Regards
Vedavatee

Dear expert
    In New G/L, there is one leading ledger for each client that is valid for all company codes
    You can define only one ledger as the leading ledger u2013 SAP provides the leading ledger u201C0Lu201D
    The leading ledger is integrated with all subsidiary ledgers
    Only the values from the leading ledger are sent to CO
    The leading area in Asset Accounting (depreciation area 01) must be posted to the leading ledger
    Leading ledger uses the (additional) local currencies assigned to the company code
    Leading ledger uses the GL Total Table: FAGLFLEXT
In each company code, the settings made for the following parameters are automatically applied to the leading ledger:
    Currencies
    Fiscal Year Variant
    Posting Period Variant
Regards
Ajeesh.s

How to get latency of posts

Hello,
I am trying to figure out how to get the latency between when a post is posted and when it's received to simulate realtime by guessing what next post will say.
The closest I've gotten so far is adding the current date in milliseconds (new Date().getTime()) in the post and comparing the value with the receiver's date. This works good but of course only works when I'm testing on my own computer since other computers will have different date. But that shows what I'm trying to accomplish.
I'm not sure if there's a good way to check this. I'm trying to think of a way to check it but so far the above is the closest I've gotten.
I'm just throwing this out there to see if someone has any idea or if someone has a similar problem.
Thanks.

You can have the reciever automatically send the object/message back so that you can compute the time it takes for the object/message to hit the reciever and et back to you and divide that by 2!

How to get SAP application language only with SQL code

Hi all,
is there a way to get the current language only whith a sql query on the Database?
I know that Ican find that information from the Application object of the UI Api but in this case i can't access them.
Thanks in advance, Luca.

Hello
You cannot get the Application language (GUI Language) from SQL, because it is stored on the client machine filesystem
Location is defined in
C:\Program Files\SAP\SAP Business One\Conf\b1-config-path.txt text file, which by defaulf is:
%USERPROFILE%\Local Settings\Application Data\SAP\SAP Business One\b1-current-user.xml file
Regards
J.

How to get Border to draw only top and bottom?

Does anyone know a way to get a Border to only draw on specific sides? i.e. create an EtchedBorder, then only have it draw the border on the top and bottom?

You can easily make your own border class and draw it yourself. Open up the source for Etched Border, copy it to your own border class, then modify it. That is legal to do. Then, you can provide the ability to allow the sides to be painted as options to your class. It is actually pretty easy to do.

How to get ABIF to post only to leading ledger ???

Similar Messages

Maybe you are looking for