How to get Access key for ABAP Program development in HANA Studio

Hi,
I have got instance for ABAP on HANA development system.
But while creating new program it is asking me for Access key, since I do not have user id pwd for service market place I couldnt able to create the access key.
Can any one suggest the way to create ACCESS KEY??
Thanks,
Ram

Dear Ram,
it seems that you need to follow the chapter 6.1 in the documentation...:
Kind regards, Stephan

Similar Messages

Access key for ABAP

Hi all,
I need to create program of ABAP. It need access key for creating. How to get access key?
Please advice,
Duypm

Hi Duypm,
You have to register the user as developer.
Login to the service market place service.sap.com
Keys & Requests -> SSCR keys ->Register Developer-> give the user id and from below select the installation number and click on register you will get the key.
Use that key when prompted in sap.
Regards
Ashok Dalai

How to get the "Key" for Dimension in SSAS.

Hi
How to get the "Key" for Dimension in SSAS.
(Below value is the PPSParameters table XML column value in PPSDatabase in SharePoint.
Below three key values are belongs to "Dimension". I have tried to find the key but I could net get it.)
<NewDataSet>
<UserValues><Key>16A201A9E75128559F947D58E6D187A9</Key></UserValues>
<UserValues><Key>7FBEA449A6ED5606973306445839619E</Key></UserValues>
<UserValues><Key>A8F75F9720817BCD2E1DFC1C1CF1E678</Key></UserValues>
</NewDataSet>
Thanks & Regards
Poomani Sankaran

To Be Honest there is not one straight Cmdlet that atleast I have come across
The best way would if you have Lync monitoring server
Using the Lync Server 2013 Monitoring Server
If you have the Monitoring Server role configured in your environment, and for Lync Server 2013 everyone should!, you can use information contained in the LcsCDR database to pull back the last time a user signed in. You can run the following query* to
pull back the user's SIP URI and their last login time:
USE LcsCDR
SELECT dbo.Users.UserUri, dbo.UserStatistics.LastLogInTime
FROM dbo.UserStatistics
JOIN dbo.Users ON dbo.Users.UserId = dbo.UserStatistics.UserId
ORDER BY UserUri
Which produces the following output:
The advantage to using the Monitoring Server to obtain this data is that unlike the information contained in the rtcdyn database, the information from the LcsCDR data will persist even when the user isn't signed into Lync.
To get approx count of users enable for Lync Server in your organisation
Get-CsUser -Filter {Enabled -eq $true} | MeasurE
Please not the above command let will give you an approx number not exact
From the Monitoring report yet the SIP account that signed in and then from count find out how many user havent signed in this is manual task
Hope this is helpful
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

How to Create ACCESS key for different users

How to create or generate an ACCESS KEY which is required to make changes to the table V_FAGL_ACTIVEC (For New General ledger) for IDES 6.0. Is it created in table DEVACCESS, if so where or is it created in SU01 where user id's are maintained. Since I am working on IDES, I thought probably we can create it for each user in SU01, but dont know the steps to do it. Please help me. It is urgent.

Hi
ACCESS KEY - First of all its provided by SAP. You can get the key from http://service.sap.com -> SAP SUPPORT PORTAL -> Keys & Requests -> SCCR Keys -> Registration. Here u can register a DEVELOPER or an OBJECT, by this time SAP will give the ACCESS KEYS.
**Note : To access http://service.sap.com u should have S number login or like that.
Only after obtaining that ACCESS KEY, SAP will allow the DEVELOPER to create some objects or change or modify Delivered objects.
Why ACCESS KEY - For creating or accessing any object some one should be responsible. Suppose, any issue arises with an object then can easily track the details who has created or modified.
Reward with suitable points

How to get master key for strong composition detail

Hi all,
My Offline Database Diagram that I have drawn with JDeveloper uses the cascading delete option in foreign keys. When the master will be deleted, its details should be deleted as well. This has resulted in strong composition relationships between master and details.
These relationships are covered by ADF BC Entity Associations and View Links.
But what strikes me is that both AppModule tester and the JHeadstart first-cut application are not able to insert a new detail? They respond with:
JBO-25030: Failed to find or invalidate owning entity
I found an article of Steve Muench discussing this topic with a bare BC4J Java sample. How do I get this in my master/details Entity Impl's context? How can I get the key of the selected master in the create() method of the detail (Steve Muench selects the first row in the table)?
I can't get rid of the strong association relationship in the Entity Association. It is automatically switched on when I switched it off.
Anyone to help?
thanks in advance,
Martijn Peters

Hi Markus,
Thanks for your reply. Your hints describe how to manually set up a master-detail relationship at the View Objects level.
Does this also work for master-detail entity objects that have a strong composition through CASCADE DELETE on the foreign keys in the database?
What surprises me is that the BC4J wizard uses different approaches for creating a master with details with or without CASCADE DELETE.
I would not expect different behavior for the create() operation in BC4J. I would only expect different behavior for remove() operations.
Moreover it is strange that the generated View Objects can not be altered and that we depend on a workaround you described.
Is their no risk for BC4J corruption when the master is deleted with the BC4J tester and that the database CASCADE deletes the details?
JDeveloper 10.1.2 provides a pretty tool for designing and maintaining a database schema though an Offline Database Diagram.
It shows the CASCADE DELETE option on foreign keys as a strong composition in an object oriented fashion.
The ADF BC wizard is very powerful in making an object oriented abstraction of the database schema.
However it seems to me that ADF BC does not seamlessly fit regarding compositions.
Switching on CASCADE DELETE in the database causes master-details pages in JHeadstart to disfunction.
Need this be improved in BC4J or am I wrong in the implied concepts?
What Java code can I add in the create() methods of my Entity Object subclasses to get the same behavior of regular master-detail objects creation?
Martijn Peters

How to get access key while creating database view in R3

Hi all experts,
I am new to SAP so please forgive my ignorance.
From R3, I am trying to create a new database view named ZVENDOR_ATTR which will be based on LFM1.
When i go to SE11 -> chose view and click create then it shows a pop up window that says "you are not registered as a developer. Please register in the Online Service System (OSS). In the OSS you will receive an access key."
I don't know how can i get the access key and proceed now. Please note that i have installed this BW3.5 and R3 on my laptop. From the default user ddic, i have copied and created a new user 'sapuser1'. I am now using the sapuser1 to logon and attempting to create the above mentioned Database view. It seems like this sapuser1 as it is copied from ddic is not a developer.
So anybody can please help how to create/get this access key to proceed further.
I will give full points. Please help.
Thank you so much in advance
ak

Thanks All,
Does it mean that i can not create any database object without the access key from service.sap.com? As i told that i installed this BW3.5 / R3 on my laptop to train myself but i don't have an account on service.sap.com.
However i can login to R3 system as admin (i have access to the system using ddic or spcpic). Is there a way that a new user with deveoper role can be created by the admin without going to service.sap.com.
Please advise.
Thanks.
ak

How to get the layouts in ABAP program/Query

Hi -
I had created some layouts for a ABAP query and I can see them in the table LTDX as well.
But I had deleted the layouts while changing the query settings.
How can I get those layouts back in my query? Please suggest. Thanks.

Hi,
Did you check with the below function modules,
ALV_LAYOUT_GET
REUSE_ALV_VARIANT_F4
Also try executing the report, RSVARDOC_610, which will enable the variants sometimes after some modifications.
I am not sure, but may be you can have a look.....

How to get rid of '#' in ABAP program ?

Hi, Gurus:
Our ABAP report reads flat file, the file is created by a legacy system.
Previously, it works fine.
Recently, the each line of file ended with symbol '#'.
We want to get rid of it, but not lucky:
We have tried using replace it with '', and tried using SHIFT by one space, all does not work.
Any one have good suggestion ?
Thanks in advance.
Liang

Hi,
Get the length of the record for each line & reduce the length by 1.
loop at gt_tab into watab.
delete trailing spaces of wa_tab-data.........
lv_len = strlen(wa_tab-data),
lv_len = lv_len - 1.
lv_data = wa_tab-data+0(lv_len). " lv_data will have the data without #
endloop.
Best regards,
Prashant

How to get the keys for a field in the dropdown list?

The dropdown list of payment terms on an account is unfortunately very big, containing al lot of different values, in our system and therefore very confusing for the user working with Web UI version 5.2 to pick the right one. The keys (code like e.i Z077 or ZO23) are not stated in the list available for user. Is there any way in the system to flag if the different fields should show boths the keys(codes) and the description of the values in the field as Payment terms, etc.
In the ERP SAP Gui it is possible to activate if you want the keys should be shown in all drop down list.
If this is not possible for all the fields at one time, what can be a solution to have the keys in the drop down lists, any suggestion will be very valuable for us.
Kindly regards
Camilla

HI Joost
No it is not that simple, that is not a solution for us. The fields are maintained i our backend system and replicated to CRM, and these fields descriptions are also printed at Order confirmations and invoices, and we do not want the keys that do not give any meaning to be visible to customers.
BR
Camilla

Access key for include

Dear Friends,
I need to make changes in an include.
Should i ask basis people to give access key for include program or main program?
Thanks.

Hi,
Check this:
Re: HOW TO MODIFY SAP STANDARD FORM
Rgds,
Raghu

Access Key for CAS

How can i get access key for CAS? I am using NWDS SP15 on NW04 SP15 sneak preview.
Thanks in advance

Hi Ravi,
please send me an e-mail: [email protected] Thanks.
Regards,
Jan

Need CAF access key for NWDS

Hello,
I just installed the Sneak Preview of NW04SP16 and would like to start exploring GP and CAF. I need an access key in order to start developing using NWDS. Can anyone help me?
Thanks in advance,
Douglas Hanshaw

Hi Douglas,
You can mail directly to Jan Rauscher([email protected]) to get access key for NWDS.
Regards,
Vishal Gupta

When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.

ABAP Access Key for Table change mode MCVKUSR & MCVBAPUSR in SE11

Dear All,
I'm using SAP ECC6.0. I want to create a new database table in the dictionary to be used in my programs. I proceed in the following way:
1. I run the SE11 transaction
2. At the first entry I write the name of the table to be Change created ( Display mode Showing )
3. I click on the change button.
4. It will ask for Access Key
But then the system asks me an Access Key , where can I get this?
I have SAP License Key.
DB Table Name : MCVBAPUSR & MCVKUSR
Please Let me know
Thanks in advance,

Dear ,
I go to Service market Place site, from SSCR Tab then I have to select a object from the list is TABL.
and enter the Particular Object & Table Name . Now I got it Access key for Particular Object.
Thank you for your quick Response.
Once again Thank u.
Regards
Thomas.T
Edited by: thomas_raja on Jun 5, 2011 6:24 AM

Access Key for Trial Version Web Dynpro ABAP 7.01 and 7.02

Hi Guys,
Can someone tell me, what is the Access Key for Trial Version Web Dynpro ABAP 7.01 and 7.02
Regards
Sankar

>
sankar.cgsl wrote:
> Hi Guys,
>
>
> Can someone tell me, what is the Access Key for Trial Version Web Dynpro ABAP 7.01 and 7.02
>
>
>
> Regards
> Sankar
HI Sankar,
I think it is not to get from this forum. You have to download the trail version and follow the instructions for installation.
Once you installed the software, you can request for the License key with your SCN credentials.
Follow this link for 7.02 Trial [/people/horst.keller/blog/2010/12/09/abap-trial-version-702-available-in-scn|/people/horst.keller/blog/2010/12/09/abap-trial-version-702-available-in-scn]

How to get Access key for ABAP Program development in HANA Studio

Similar Messages

Maybe you are looking for