How to get access key while creating database view in R3

Hi all experts,
I am new to SAP so please forgive my ignorance.
From R3, I am trying to create a new database view named ZVENDOR_ATTR which will be based on LFM1.
When i go to SE11 -> chose view and click create then it shows a pop up window that says "you are not registered as a developer. Please register in the Online Service System (OSS). In the OSS you will receive an access key."
I don't know how can i get the access key and proceed now. Please note that i have installed this BW3.5 and R3 on my laptop. From the default user ddic, i have copied and created a new user 'sapuser1'. I am now using the sapuser1 to logon and attempting to create the above mentioned Database view. It seems like this sapuser1 as it is copied from ddic is not a developer.
So anybody can please help how to create/get this access key to proceed further.
I will give full points. Please help.
Thank you so much in advance
ak

Thanks All,
Does it mean that i can not create any database object without the access key from service.sap.com? As i told that i installed this BW3.5 / R3 on my laptop to train myself but i don't have an account on service.sap.com.
However i can login to R3 system as admin (i have access to the system using ddic or spcpic). Is there a way that a new user with deveoper role can be created by the admin without going to service.sap.com.
Please advise.
Thanks.
ak

Similar Messages

Getting ORA-32700 while creating database

I am getting following error when creating the database :
ORA-32700 error occurred in DIAG Group Service
The error description is as follows :
Cause: An unexpected error occurred while performing a DIAG Group Service operation.
Action: Verify that the DIAG process is still active. Also, check the Oracle DIAG trace files for errors.
The setup is as follows :
Database : Oracle 9i Rel 2.
OS : IBM AIX 4.3.3
We are trying to create the database from sqlplus/dbca. It seems that in the database creation process it is throwing the error while it is trying to create the control files.
listener.ora :
LSNR_TSEDMDB2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = prcsmbk1)(PORT = 1522))
TNSNAMES.ORA
LISTENER_TSEDMDB2 =
(ADDRESS = (PROTOCOL = TCP)(HOST = prcsmbk1)(PORT = 1522))
We have IBM HACMP Cluster setup on 3 machines. This machine (prcsmbk1) on which I am getting the error while creating the database is part of that HACMP cluster. While installing the Oracle database software also it gave me a list of the 3 machines which are in HACMP cluster. We are not planning to setup RAC, but still it seems like while creating the database control files Oracle is trying to perform some group service operation.
Alert log :
Sat Jan 3 03:31:18 2004
Starting ORACLE instance (normal)
Sat Jan 3 03:31:18 2004
Global Enqueue Service Resources = 64, pool = 4
Sat Jan 3 03:31:18 2004
Global Enqueue Service Enqueues = 128
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
GES IPC: Receivers 1 Senders 1
GES IPC: Buffers Receive 1000 Send 530 Reserve 300
GES IPC: Msg Size Regular 432 Batch 2048
SCN scheme 3
Using log_archive_dest parameter default value
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.4.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
shared_pool_size = 117440512
large_pool_size = 16777216
java_pool_size = 117440512
control_files = /u01/app/oracle/oradata/TSEDMDB2/control01.ctl
db_block_size = 8192
db_cache_size = 33554432
compatible = 9.2.0.0.0
db_file_multiblock_read_count= 16
fast_start_mttr_target = 300
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 10800
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = TSEDMDB2
dispatchers = (PROTOCOL=TCP) (SERVICE=TSEDMDB2XDB)
local_listener = LISTENER_TSEDMDB2
job_queue_processes = 10
hash_join_enabled = TRUE
background_dump_dest = /u01/app/oracle/admin/TSEDMDB2/bdump
user_dump_dest = /u01/app/oracle/admin/TSEDMDB2/udump
core_dump_dest = /u01/app/oracle/admin/TSEDMDB2/cdump
sort_area_size = 524288
db_name = TSEDMDB2
open_cursors = 300
star_transformation_enabled= FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 25165824
aq_tm_processes = 1
Sat Jan 3 03:31:19 2004
clUster interconnect IPC version:Oracle UDP/IP
IPC Vendor 1 proto 2 Version 1.0
PMON started with pid=2
DIAG started with pid=3
LMON started with pid=4
LMD0 started with pid=5
DBW0 started with pid=6
LGWR started with pid=7
CKPT started with pid=8
SMON started with pid=9
RECO started with pid=10
CJQ0 started with pid=11
QMN0 started with pid=12
Sat Jan 3 03:31:24 2004
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Sat Jan 3 03:31:25 2004
Create controlfile reuse set database TSEDMDB2
MAXINSTANCES 1
MAXLOGHISTORY 1
MAXLOGFILES 50
MAXLOGMEMBERS 5
MAXDATAFILES 100
Datafile
'/u01/app/oracle/oradata/TSEDMDB2/cwmlite01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/drsys01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/example01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/indx01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/odm01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/system01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/tools01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/undotbs01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/users01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/xdb01.dbf'
LOGFILE GROUP 1 ('/u01/app/oracle/oradata/TSEDMDB2/redo01.log') SIZE 102400K,
GROUP 2 ('/u01/app/oracle/oradata/TSEDMDB2/redo02.log') SIZE 102400K,
GROUP 3 ('/u01/app/oracle/oradata/TSEDMDB2/redo03.log') SIZE 102400K RESETLOGS
Sat Jan 3 03:31:25 2004
ORA-1503 signalled during: Create controlfile reuse set database TSEDMDB2
MAX...
Sat Jan 3 03:32:28 2004
Restarting dead background process QMN0
QMN0 started with pid=15
Sat Jan 3 03:32:28 2004
Shutting down instance (abort)
License high water mark = 3
Instance terminated by USER, pid = 47128
Diag trace file :
/u01/app/oracle/admin/TSEDMDB2/bdump/tsedmdb2_diag_49754.trc
Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
ORACLE_HOME = /u01/app/oracle/product/9.2.0
System name: AIX
Node name: prcsmbk1
Release: 3
Version: 4
Machine: 0002599F4C00
Instance name: TSEDMDB2
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
49754
Number of Serviceable Networks detected is less than 2
Disabling Transparent Network Failover Feature.
*** SESSION ID:(2.1) 2004-01-03 03:31:19.886
kjzcprt:rcv port created
kjzmreg2: slos err[1 19 [HA_GS_CONNECT_FAILED] sskgxn_gs_in 19]
[kjzmreg2]: Error [category=1] is encountered
Node monitor problem:[32700][kjzmreg2]
Membership is lost in DIAG group
Any help is appreciated. Thanks in advance.

Thanks a lot for all your responses. We found the issue. The issue was that when we installed 9i we selected Enterprise option which installed RAC also. And after that when we were trying to create database Oracle was thinking that we are trying to create database in RAC env. and most likely it was trying to create/sync the control files on all the machines in the cluster.
The sequence of events were as below :
1. We have 8i installed on this machine
2. We installed 9i (9.2.0.1.0) using the same ORACLE_BASE but different ORACLE_HOME. We didn't select "Custom Install". We selected "Enterprise install" option
3. We installed new installer (2.2.0.18.0 ) and then 9i patch (9.2.0.4.0)
4. While creating the database (manually & through DBCA) we were getting ORA-32700
5. We tried to uninstall (using OUI 2.2.0.18.0) 9i (including the patch) completely but it never succeeded. We noticed that when we started uninstall it did show progress for about 20 minutes and after that it didn't show any progress. It was not taking any CPU cycles and It was not writing to the log file either. Basically we were never able to cleanly uninstall 9i. We tried almost 2 to 3 times.
6. Then we installed 9i using a new ORACLE_BASE and this time we selected "Custom Install" and we did not install RAC. This is successful
7. Then we installed new installer (2.2.0.18.0 ) and we tried to install the 9i patch (9.2.0.4.0) using this new installer but it never succeeded. Then we tried to install the 9i patch (9.2.0.4.0) using the old installer version (2.2.0.11.0) and it was also successful.
8. Then we tried to create database using DBCA and it was successful and then we dropped the database which was created using DBCA and then we created it manually through SQLPLUS and this was fine too.
So basically what we learned from this exercise is that if we are installing 9i on a machine which is part of a cluster and if we don't plan to setup RAC then we shouldn't install RAC and we should do a custom install. I wish there was a option in create database stmt to tell Oracle that though we are creating database on a machine which is part of a cluster environment but we don't intend to setup RAC.
And other thing which is still a mystery is that why does the uninstall never completes successfully. One question on this : We were using the installer version 2.2.0.18.0 to uninstall the 9i software. Do we need to use the older version (2.2.0.11.0) of the OUI?

How to get Access key for ABAP Program development in HANA Studio

Hi,
I have got instance for ABAP on HANA development system.
But while creating new program it is asking me for Access key, since I do not have user id pwd for service market place I couldnt able to create the access key.
Can any one suggest the way to create ACCESS KEY??
Thanks,
Ram

Dear Ram,
it seems that you need to follow the chapter 6.1 in the documentation...:
Kind regards, Stephan

I am getting this error while creating Database manually.

SQL> @anupam.sql
create database anupam
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '?/rdbms/admin/dtxnspc.bsq' near line 20
ORA-00604: error occurred at recursive SQL level 1
ORA-19502: write error on file "/home/oracle/anupam/users02.dbf", block number
24704 (block size=8192)
ORA-27072: File I/O error
Linux Error: 25: Inappropriate ioctl for device
Additional information: 4
Additional information: 24704
Additional information: 53248
Process ID: 21047
Session ID: 1 Serial number: 3

is your directory /home/oracle/anupam/ 100% full can you paste df -kh output

How to get pricing conditions while creating Sales Order

Hi Guys,
When we create sales order using VA01, price is automatically determined using pricing condition configured.
My requirement is, I need to know what would be the price of a particular item.Say i put one item A with quantity x,can I get which price conditions will be applied and what value will come for them.I need this because I need to validate this price with some other price put in a file .

I would suggest to use the Exit because that will be less efforts and you can implment and debug it easily. Moreover, you can restrict it by any condition e.g. order type, order reason because all the internal tables are available at that point.
Whereas, accessing the access sequence is cumbersome process. You need to go to all the combinations (tables) in the access sequcen and try to find out the suitable match .
Regards,
Naimesh Patel

Error while creating database in classic appln

Hi All,
I am getting this error while creating database in classic application.
com.hyperion.planning.olap.EssbaseException: Failed to create database, error code [%s] (1013221).
Can anyone please let me know why I am getting it?
Thanks in advance

Can you check for a more specific error code in the Application log? There can be various reasons for this:
1. For data storage and binary installation, Essbase supports the use of any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS). A disk array mounted using NFS or CIFS is not supported.Use any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS).
2. Error occurs when deploy Planning application with double byte enabled. When the plan name is changed to English, deploy will be successful. This issue can be fixed by setting Correct Essbase ESSLANG system value.
3. The Essbase User that creates the application and DB folders has default ACL rw-rw-rw which does not allow the essbase app to create files inside the folder.
HTH-
Jasmine.

Error while creating parameterise view

I m getting below error while creating parameterise view
CREATE OR REPLACE VIEW rdr_le_info_view (v_run_number , v_isin_cob )
AS
SELECT l.strategic_le
,cun.ucn cunucn
,cun.date
,cccs.ucn ucn
,cccs.agr_num
FROM strat_le l
,ucn_name cun
,customer_setup cccs
WHERE l.gfa_until_dt = '31-dec-9999'
AND l.glas_until_dt = '31-dec-9999'
AND l.int_until_dt = '31-dec-9999'
AND cccs.run_num = v_run_num
AND cccs.ucn_lead_office = cun.ucn
AND cun.OID = l.client_oid;
AND cccs.run_num = v_run_num
ERROR at line 13:
ORA-00904: "V_RUN_NUM": invalid identifier
Plese help me in above.

Try
CREATE OR REPLACE VIEW rdr_le_info_view
AS
SELECT l.strategic_le
,cun.ucn cunucn
,cun.date
,cccs.ucn ucn
,cccs.agr_num
FROM strat_le l
,ucn_name cun
,customer_setup cccs
,cccs.run_num run_num
WHERE l.gfa_until_dt = '31-dec-9999'
AND l.glas_until_dt = '31-dec-9999'
AND l.int_until_dt = '31-dec-9999'
AND cccs.ucn_lead_office = cun.ucn
AND cun.OID = l.client_oid;Then call it like:
select *
from rdr_le_info_view
where run_num = v_run_num;

How can i get access code to create ABAP Program ?

hi guys ,
How can i get access code for creating ABAP Program in my System.
I am using SAP IDES 4.6 Version
Please Help me out .
Regards
Raghu

Hi Raghu,
- license your system (http://service.sap.com/licensekey)
- create a developer key (http://service.sap.com/sscr)
- create a key for your ABAP program (httP://service.sap.com/sscr)
Markus

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

Suddenly user account login requested, but was newer created (OS X 10.5.6), how to get access again

suddenly user account login requested, but was newer created (OS X 10.5.6), how to get access again?

No account ever created, or what?
If not 1.6 Server, then...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Admin Hack...
http://www.hackmac.org/?q=node/4
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one.
http://www.macyourself.com/2009/08/03/how-to-reset-your-mac-os-x-password-withou t-an-installer-disc/

Qosmio G30-126 - How to get access to the bios!

I have a laptop Qosmio G30-126 and I don't know the key for entering the bios to change to properties for the HDD or any thing... so how to get access to the bios? what is the key for the bios??

Hi
Try to press the F2 button while powering the unit.
Older Toshiba notebooks supported the ESC and then F1 button
So these two options are possible

How to get all INDEXes from a database

How to get all INDEXes in a database? I need to store them in script file (.SQL). My database version is 10.2.0.3.0.
Edited by: Iniyavan on Sep 18, 2009 1:39 PM

--Thanks, Koppelaars. The second query works. But I'm unable to store in spool file. May be it's due to CLOBs in the output. I did the following:
set head off
set feedback off
set linesize 32727
set pagesize 50000
spool c:\indexes.sql
select dbms_metadata.get_ddl('INDEX',INDEX_NAME,'MYSCHEMA')
from user_indexes;
spool off
--In the spool file, I find only this
CREATE UNIQUE INDEX "MYSCHEMA"."A" ON "MYSCHEMA"."BNK_DEALID" ("DEAL_ID")
PCTF
CREATE INDEX "MYSCHEMA"."ACCENT_RAC_REPORT" ON "MYSCHEMA"."ACCENT" ("SCHEME", "VAL
CREATE INDEX "MYSCHEMA"."ACCENT_REPORT" ON "MYSCHEMA"."ACCENT" ("SCHEME", "APP_REF
CREATE UNIQUE INDEX "MYSCHEMA"."ACCENT_X" ON "MYSCHEMA"."ACCENT" ("DEAL_ID")
P
CREATE UNIQUE INDEX "MYSCHEMA"."ACCNAV_X" ON "MYSCHEMA"."ACCNAV" ("SCHEME", "ACCNA
--How to get all the DMLs in one SQL file?
--Nagappan, I'm using WIN.

Error while creating database manually

hi guru's i am getting error while creating database manually
my sql is SQL>create database lily
logfile   group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
            group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
            group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
character set          WE8ISO8859P1
national character set utf8
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf'
            size 50M
            autoextend on
            next 10M maxsize unlimited
            extent management local
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf'
            size 10M
            autoextend on
            next 10M
            maxsize unlimited
undo tablespace undo
            datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf'
            size 10M
default temporary tablespace temp
            tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf'
            size 10M;and i am getting following error
create database lily
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\LILY\CONTROL01.CTL'
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already exists
code}
Edited by: CHETAN YADAV on Jul 19, 2011 6:55 PM

create database lily
logfile   group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
          group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
            group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf' size 150M
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf' 150 M
undo tablespace undo datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf' size 10M
default temporary tablespace temp tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf' size 10M;
remove the SQL> from the a.sql script also change the system datafile size to minimum of 100mb size
ALSO check/change the undotablespace name with your init parameter file it should match as it is in the init parameter file
Edited by: rajeysh on Jul 19, 2011 6:59 PM

Error message while creating database

Log error
while creating new database
Robot-properties
XML Parsing Error: junk after document element
Location: http://portalserver/psconsole/faces/search/RobotPropertiesHome.jsp
Line Number 18, Column 1:<body id="_id3" onload="return _id3_jsObject
I have created my new search engine .
and the robot is not running.I getting log error.
and no directory is created with the search name.
please help me with the fields..
creating search server..
required Port:
required Configuration Name:
Required Instance:
*Web Container Administration*
Required Administration Host:
Required Administration Port:
Required Administrator:
Required Administration Password:
*Web Container Directories*
Required Install Directory:
Required Instance Directory:
Required Document Root Directory:

Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe

How to get default values while using the transaction "BP"

Hi Group,
I have a query on how to get default values while using the transaction <b>BP</b>?
The thing is:
when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
how can I achieve this?
So please kindly let me know the procedure to achieve this.
Thanks & Regards,
Vishnu.

Hi,
The events of BDT can be used to default some fields on creating a partner.
For this create a function module for ISDAT. attach that event in BUS7.
In the ISDAT funtion modulethe following code should be used.
For example to set the nationality:
I_BUSDEFAULT-NATIO = 'DE.
CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
EXPORTING
i_busdefault = I_BUSDEFAULT
Regards, Smita.

How to get access key while creating database view in R3

Similar Messages

Maybe you are looking for