How to get access to the HTTP-Manager Tomcat ?

How to get access to the HTT-Manager Tomcat ?
Whe i do:
http://localhost:8080 - i have access to the Kablink.
How i can get access to the Tomcat Manager ??
Serg

Originally Posted by skoltogyan
How to get access to the HTT-Manager Tomcat ?
Whe i do:
http://localhost:8080 - i have access to the Kablink.
How i can get access to the Tomcat Manager ??
Serg
Hey Serg,
I don't think that's possible with the tomcat config that is supplied with Vibe.
You might get a better answer in the community space for Vibe/Kablink at vibe.novell.com, direct link being atm: https://vibe.novell.com/ssf/a/do?p_n...beonprem_url=1
Cheers,
Willem

Similar Messages

  • How to get access to the OCM toolkit  ?

    how to get access to the OCM toolkit  ?
    the full version not the demo !

    I need to know how to do a complex query my task is to find out the names of people allergic to paracetomol and penicilllin from a list of names??? I REALLY NEED HELP ITS DUE IN TODAY!
    TASK: show the Pupils: forename, Pupil surname, Year group, teacher in charge to all children allergic to penicillin and paracetmol from the table of names (not everyones allergic) How do I query it!?????????
    <a href="http://www.ornsoft.com/">Custom software development</a>
    <a href="http://www.aconsultancy.co.uk">Acquisition Search Warwickshire</a>

  • Qosmio G30-126 - How to get access to the bios!

    I have a laptop Qosmio G30-126 and I don't know the key for entering the bios to change to properties for the HDD or any thing... so how to get access to the bios? what is the key for the bios??

    Hi
    Try to press the F2 button while powering the unit.
    Older Toshiba notebooks supported the ESC and then F1 button
    So these two options are possible

  • How to get access to the partner Functions of a PO header in BADI

    Hi All,
    I have a scenario where I need to get access to the PO Header Partner Functions to get the Vendor number, in the PROCESS_ITEM method of BADI ME_PROCESS_PO_CUST. I could not find any method to get the partner functions. Is there any way I can get this data in my BADI implementation. I'm talking about ME21n transaction code, and the PO is not created yet, hence the PO number is not available in the BADI.
    If the above is not possible, is there any other function module which I can call in the PROCESS_ITEM method of the BADI to get partner functions and their respective vendor numbers.
    Any pointers would be appreciated and points awarded. Thanks for your time and help.

    Hello,
    Use the methods of the class: CL_PO_ITEM_HANDLE_MM, in the method: PROCESS_ITEM of the badi:
    ME_PROCESS_PO_CUST, for example to access the po lines. the code is as follows:
    data: it_mepoitem type mepoitem.
    **Get the po lines.
      it_mepoitem = im_item->get_data( ).
    To look at the methods available: Go to SE24, Input the class:
    CL_PO_ITEM_HANDLE_MM
    Hope this helps.
    PS: Award points if my answer is helpful.
    Rajeev

  • How to get access to the local file system when running with Web Start

    I'm trying to create a JavaFX app that reads and writes image files to the local file system. Unfortunately, when I run it using the JNLP file that NetBeans generates, I get access permission errors when I try to create an Image object from a .png file.
    Is there any way to make this work in Netbeans? I assume I need to sign the jar or something? I tried turning "Enable Web Start" on in the application settings, and "self-sign by generated key", but that made it so the app wouldn't launch at all using the JNLP file.

    Same as usual as with any other web start app : sign the app or modify the policies of the local JRE. Better sign the app with a temp certificate.
    As for the 2nd error (signed app does not launch), I have no idea as I haven't tried using JWS with FX 2.0 yet. Try to activate console and loggin in Java's control panel options (in W7, JWS logs are in c:\users\<userid>\appdata\LocalLow\Sun\Java\Deployment\log) and see if anything appear here.
    Anyway JWS errors are notoriously not easy to figure out and the whole technology in itself is temperamental. Find the tool named JaNeLA on the web it will help you analyze syntax error in your JNLP (though it is not aware of the new syntax introduced for FX 2.0 and may produce lots of errors on those) and head to the JWS forum (Java Web Start & JNLP Andrew Thompson who dwells over there is the author of JaNeLA).

  • How to get access to the internal speakers?

    Since updating my Macbook with the last security patch the audio prefpane lost the internal speakers. Nevertheless they are working: the sound while booting comes.
    I've just reseted the parameter ram, cleared caches, rebuild the access structure.
    And now?

    I've had a similar problem on my G5 Desktop, but I don't think it was internal speakers, just the usb headset/iMic adaptor that was lost. Disconnecting and reconnecting always fixed it.
    I'm guessing a restart didn't fix it, either?
    I tried to find a plist that might control it, and all I found was /Library/Preferences/com.apple.audio.DeviceSettings.plist
    I'm not certain this will do anything, but you could try moving it out of the /Library/Preferences folder.
    I don't know if a restart, logout/in, or just opening the Sound prefs will be needed. If it doesn't fix anything, you can always move it back.

  • How to get rid of the "s" in http

    how to get rid of the "s" in http

    As Kurt Lang says, https is secure http and is frequently determined by the website you are visiting.
    However, there is a EFF HTTPS Everyware browser plug-in that will attempt to force https if possible (EFF - Electronic Frontier Foundation).  Did you by any chance install the HTTPS Everywhere plug-in ?

  • How to get access to my iCloud back up when setting up a new iPhone 5s which needs the newest version of iOS7 first?

    how to get access to my iCloud back up when setting up a new iPhone 5s which needs the newest version of iOS7 first?

    Set up the new phone as a new iPhone (without using your backup), then update it to the latest iOS (7.1.2).  Then go to Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens again and when given the option, choose Restore from iCloud Backup and follow the prompts.  This process is explained in more detail here: iCloud: Restore your iOS device from iCloud.

  • I loos my APPLE ID, I have a new one, how can get access to data stored in the old one?

    I loos my APPLE ID, Now I have a new one, how can get access to data stored in the old one?

    Do you have the email & password of the old Apple ID?

  • Photostream Issue - I have had several phones over the years all backing up via iCloud/Photostream. It seems that the oldest of my photos and videos are simply gone and I cannot seem to figure out how to get access to them. Why is this happening?

    Photostream Issue - I have had several phones over the years all backing up via iCloud/Photostream. It seems that the oldest of my photos and videos are simply gone and I cannot seem to figure out how to get access to them. Why is this happening? Is there anything I can do to get them back? I'm freaked out by the thought that I am paying for what I thought was a safe place for my photos to be stored and accessed later but now see that there are nearly 500 pictures/videos gone from my photostream folder. Any help would be greatly appreciated. Thank you. - Michael

    Hi newmarket,
    Photo Stream is not a respository for archiving photos. It is a cloud storage device that will store the last month or last 1000 photos taken by any device on the same Apple ID, and then will "share" those photos with all other devices that have Photo Stream turned on,and that are logged onto the same Apple ID.
    iCloud backups will contain all of the photos that were on your camera roll the last time you backed up your device.
    If you have photos outside of the Photo Stream parameters, and they are not all on your current camera roll, then you have no way to retrieve them unless you have imported them to the computer you sync with or have uploaded them to some other cloud service like DropBox.
    Sorry,
    GB

  • How do I get access to the parent window native pointer?

    Under Windows:
    I need to get access to the native pointer for an applications frame (in this case a JFrame).
    I need to do this because I want to display property pages in a native dialog box. These property pages are supplied by driver software, are themselves native, and require a valid CWnd handle in order to become active and therefore visible.
    Hence I need access to the native peer. Is there a way to do this?

    ok andrew, when i compile the given code i receive the following errors:
    hwndex.java:19: cannot resolve symbol
    symbol  : class DrawingSurfaceInfo
    location: class HwndEx
          DrawingSurfaceInfo drawingSurfaceInfo =
          ^
    hwndex.java:20: cannot resolve symbol
    symbol  : class DrawingSurface
    location: class HwndEx
             ((DrawingSurface) comp.getPeer()).getDrawingSurfaceInfo();
               ^
    hwndex.java:20: warning: getPeer() in java.awt.Component has been deprecated
             ((DrawingSurface) comp.getPeer()).getDrawingSurfaceInfo();
                                   ^
    hwndex.java:24: cannot resolve symbol
    symbol  : class Win32DrawingSurface
    location: class HwndEx
             Win32DrawingSurface win32DrawingSurface =
             ^
    hwndex.java:25: cannot resolve symbol
    symbol  : class Win32DrawingSurface
    location: class HwndEx
                   (Win32DrawingSurface) drawingSurfaceInfo.getSurface();
                    ^
    4 errors
    1 warningand i consulted the document for "getPeer()" and there it is said that "getPeer()" method has been deprecated since JDK 1.1 so how can one use the above code. please give the code in more appropriate way.

  • How to get rid of the Login page in Portal?

    Hi Guys,
    I have a newly developed intranet portal project for my company which does not need login no more. I hope you can help me how to get rid of the login page in portal which is I know in every application you create, there should be a login. Is this possible that I can just simply type in to the URL address bar my application then it will no longer ask for any logins? Please help! Many thanks!
    Russel

    Hi Russel,
    You can give public access to pages, applications etc. Users won't need to supply a username/password then, while you still can hide some of the pages to authorized people.
    Check the access tab for pages and the manage tab for applications.

  • Is it necessary to fill in the number of my credit card to get access to the apps? What if I don't have one?

    Is it necessary to fill in the number of my credit card to get access to the apps? What if I don't have one?

    How to Get Apps From the App Store Without a Credit Card
    http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    http://support.apple.com/kb/ht2534
     Cheers, Tom

  • How to get access to a business Unit in Fusion Sales Cloud for Incentive compensation user

    Hi all,
    We are setting up a new environment and we do not seem to get access to the Business Unit.
    We have all the roles necessary and have access to the required screens but cannot populate any data as the business Unit DropDown is not showing any values.
    Any help is appreciated.

    I don't think the IT Security Manager role is going to help you in the Incentive Comp plan UI.
    This is a screenshot from my test environment where I have these two roles for the business unit "IC Performance Test".  I am not an IC expert and this was set up a couple of years ago, so I don't recall all the details.  I have pinged the IC team to comment on this.
    Thanks,
    Oliver
    Fusion Apps Developer Relations
    https://blogs.oracle.com/fadevrel

  • How to get head of the department(HOD) as an approver.

    Hi Experts,
    Existing scenario:
    Created travel(international) request after getting approved by 1st level(line-manager) work item will go for next level(final approver Line exco).
    existing code is attached.
    To be developed Scenario:
    After getting approved by 1st level (line-manager) work item will go 2nd level (Head odf hte department) prior to final approval(line-exco).
    Please suggest me how to get Head of the department using bellow logic.
    Pick the ORGEH ( Org unit)  as on 31.12.9999 and pass it to HRP1001 with the following field values
    RSIGN      A
    RELAT      803
    And pick the SOBID ID as on 31.12.9999
    Now pass the SOBID in table HRP1001 , and pass the data with the following field values
    OTYPE – O
    OBJID – same as SOBID
    RSIGN      B
    RELAT      012
    Pick the SOBID
    Now pass the SOBID to HRP1001 and
    RSIGN      A
    RELAT      0008
    SOBID : PERNR
    Pass the PERNR in PA0105  pick the data against SUBTY 0001 .
    Thanks in advance
    Goutam

    why not use an HR evaluation path (transaction OOAW see for example WF_ORGUN ) and read the path with RH_STRUC_GET function module?
    https://help.sap.com/saphelp_erp60_sp/helpdata/en/c5/e4b2c8453d11d189430000e829fbbd/frameset.htm

Maybe you are looking for