How to get accounting data when miro after saving?
Hi,
As subject. Because I want to print credit memo when miro after saving for transaction is credit memo and need to determine GL account and posting key. Then this data need to insert to add-on table for reprint using.
Thanks a lot!!
Best Regards,
Nicole Chen
Edited by: Nicole Chen on Mar 11, 2009 11:19 AM
don't need its.
Similar Messages
-
Due to multiple problems with Lion, I decided to reformat my hard drive with Snow Leopard (10.5.8) and now am unable to retrieve my data from my time capsule (1T). I tried to import but ended up with 342 pictures of mainly clip art and downloads from emails. Help. I don't know how to get to the time capsule. When I open time capsule, it shows only the dates since I reformatted on Sunday.
I don't think this helped me! I am afraid to do the Terminal thing if it can't be undone! I cannot afford to lose the time machine backups. When I open the time machine now, it shows only backups from Sunday when I reformatted the disk!!!
I did open disk utility which is as follows:
Capacity: 464.8 GB (499,113,885,696 Bytes)
Available: 441.6 GB (474,187,837,440 Bytes
Used: 23.2 GM (24,926, 048,256 Bytes)
Number of Files: 634,969
Format: Mac OS Extended (Journaled)
Owners Enabled: Yes
Number of Folders: 159,926
It gives me the option to restore, but then wants a source and destination. Is this the right place to be? I have Version 10.5.8. -
How to get location data when uploading from DSLR?
I have read that you can't add or edit location data when files are added to Photos in the new Yosemite version. But does the location still get added when you upload via a wireless connection like on the iPad?
If not, is there a workaround?I have ended up with thousands of photos on the iMac with no location data as a result of the upgrade. I don't want to make the problem worse.
Any help or advice appreciated.I'm not exacting sure what the difference between tagging and geotagging is. I do know that at present on my ipad (and I haven't upgraded it from IOS7 yet), if I import my DSLR photos to the ipad, when in a wifi environment, it adds the location to the photos where they were uploaded. Without wifi, no location gets added. I actually haven't figured out a way to add location data to the photos using the ipad, is there a way? I have always been advised before to use my mac to do that, which is no longer possible in Yosemite as far as I can tell.
-
Pages - How to get current date when opening a template!
I have a stationery template with the date on itl When the template opens can I get it to display the current date.. It so how is that done.
Yes, and the worst:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=424&sid=ba144f60f149 4f75c94316b0c7fbff2b&mforum=iworktipsntrick
If you had Pages previously it should be in your Applications > iWork folder.
Peter -
How do i get the date when enter a week number
Hi, can anyone tell me how do i get the date when enter a week number??
let say, i enter week number 4 and year 2008
result=26-01-2008
thanks..import java.util.Calendar;
public class testCalendar {
public static void main(String args[]){
int year=2008;
int week =5;
Calendar now=Calendar.getInstance();
now.set(Calendar.YEAR,year);
now.set(Calendar.WEEK_OF_YEAR,week);
System.out.println(now.getTime());
hai, anyone know why i can't get the result:27-01-2008
i always get two day later. That is 29-01-2008
no wonder how i change the week number and year.
for example: week=7, year=2007
expected result:11-02-2007
but the result is 13-02-2007
thanks..
Edited by: Angel_Wei on Sep 1, 2008 11:58 PM -
How to get an email when data got inserted
Hi All,
Could you please let me know how to get an email when data got inserted into table by using sql/plsql
Thanks in adavanceCould you please let me know how to get an email when data got inserted into table by using sql/plsql
Well that seems pretty straightforward - write some pl/sql to send you an email when that pl/sql inserts data into a table.
See this Oracle-base article for an example of sending mail.
http://www.oracle-base.com/articles/misc/email-from-oracle-plsql.php
Post what you have tried so far. What part of what you have tried doesn't seem to be working? -
How to get changed data in ALV in Web Dynpro for ABAP
METHOD on_data_check .
DATA:
node_spfli TYPE REF TO if_wd_context_node,
node_sflight TYPE REF TO if_wd_context_node,
itab_sflight2 TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
IMPORTING
table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AMHi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
lr_table_settings->set_data_check(
IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
lr_table_settings->set_data_check( IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values. -
How to get the data from Pooled Table T157E.
Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil -
How to Get Missing Dates for Each Support Ticket In My Query?
Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
How to get javabean data in Servlets.( JavaBean -- Servlet(Controller)
how to get javabean data in Servlets.
1) I am using name ,password in Jsp(View )
2) when I submit this Bean will be called and Setter methods will be called .
3) In ServletController (controller) I want to get data of javabean.
In this I have to do validation of user.
I want to pass the javabean obj as like -->
request.getAttribute("beanObj");
My intention is to get all the poperties in javabean by passing bean id
or beanobj ,
Is there any way to get all the data using bean id or beanObj.
Plz Reply,Now in the Servlet we can get the same bean by this code:
PageContext pageContext = JspFactoryImpl.getDefaultFactory().getPageContext(this, request, response, null, true, 8192, true);
UserBean userbean = (UserBean)pageContext.getAttribute("userbean", PageContext.SESSION_SCOPE);
String userid = userbean.getUsername();
For this code to work it is needed to import 2 files:
import org.apache.jasper.runtime.JspFactoryImpl;
import javax.servlet.jsp.PageContext;
The JspFactoryImpl is in jasper-runtime.jar file provided in tomcat dir.It seems to me that you are exactly knowing what you are doing :-(
You can get a Bean stored in a Session by
request.getSession().getAttribute("userbean");
In the login.jsp page for example we have the code
<jsp:useBean id="userbean" scope="session"class="com.newproj.UserBean" />
<jsp:setProperty name="userbean" property="*" />the jsp:setProperty is not called when you click on the submit button
if fills the bean with the request values from the previous request.
andi -
How to get values/data stored in the database into a list-item.
how to get values/data stored in the database into a list-item.
i tried to make a list item without any values assigned to it...but i got the below error.
FRM-30191: No list items defined for required poplist.
or
FRM-32082: Invalid value for given item type.
List EMPNO
Item: EMPNO
Block: EMP
Form: MODULE5
FRM-30085: Unable to adjust form for output.
then according to some docs, i tried the the following for the trigger
when-new-form-instance
declare
rg_name varchar2(40) := 'emp_rec';
status number;
groupid recordgroup;
it_id item;
begin
it_id := Find_Item('empno');
groupid := create_group_from_query(rg_name, 'select empno from emp');
status := populate_group(groupid);
populate_list(it_id, groupid);
end;
but yet didnt work... :(
so how the heck do i get values fetched from the database table into the list item?for list items you need to values in the record group, one is the shown value and one is the returned value.
Check out the online help for the populate_list built-in.
You'll need something like select ename,ename from emp as the record group query. -
I lost my Iphone and I stored my photos on icloud, how to get those data back? My PC also not working.
Welcome to the Apple Community Rahul.
Photos in photo stream...
You can log into your iCloud account on another computer or device and enable photo stream to see your photos. You should do this as soon as possible because photo stream in the cloud only keeps photos for 30 days and each day you delay, you will lose another days photos.
Photos in the camera roll...
If you kept a back up of your device you can use it to restore to a replacement device, this will restore all of the photos in your camera roll and isn't time limited. -
How to get communication data in CRM 7.0
In CRM 7.0 with CCS active.
How to get communication data (Current phone #) that is presently active while creating Interaction Record or during account confirmation.
Thanks,
Nilesh P.Hi,
This problem is related to IC and not related to Marketing Campaign.
At this movement I hv resolved this problem by storing phone # in memory variable by some other way.
But I would be more interested to know Communication Data in 'Context area' of IC.
Thanks & Regards,
Nilesh P. -
How to get activity data by Bulk APIs v2.0?
Hi all,
I have completed to get Account data by Bulk APIs v2.0. (create an export for Account and then create a Sync for this export)
But when trying to use the integration to work for Activity data, I always get Error status of Sync.
So, could you please show me any suggestions for this issue?
Is there any option different between exports of Account and Activity?
Thanks,
Biao
PS: I find an example to request activity data:
POST https://<host>.eloqua.com/api/bulk/2.0/activities/exports
"name":"Example Activity Export",
"fields":{
"ActivityId":"{{Activity.Id}}",
"AssetName":"{{Activity.Asset.Name}}",
"ActivityType":"{{Activity.Type}}",
"Id":"{{Activity.Id}}",
"ActivityDate":"{{Activity.CreatedAt}}",
"EmailAddress":"{{Activity.Field(EmailAddress)}}",
"ContactId":"{{Activity.Contact.Id}}",
"VisitorId":"{{Activity.Visitor.Id}}",
"AssetType":"{{Activity.Asset.Type}}",
"AssetId":"{{Activity.Asset.Id}}",
"RawData":"{{Activity.Field(RawData)}}"
"filter":"’{{Activity.Type}}’=’FormSubmit’"
I get error status of Sync for this export. But when I remove the 'Id' and 'RawData' fields, I get success.
I guess that there are some roles of the field settings, e.g. one statement should not appear more than once, and so on.
So, where could I find the roles? Or is there an API could return the valid field list?
Thank you very much.Hi Biao,
I am able to pull the data for Activity Export for Type Form Submit.
I am adding details below :
1) Create Activity Export Structure
URL : https://www02.secure.eloqua.com/API/Bulk/2.0/activities/exports
Input JSON : {"name":"Bulk Activity Export","dataRetentionDuration":"PT1H","fields":{"activityId":"{{Activity.Id}}","assetId":"{{Activity.Asset.Id}}","activityType":"{{Activity.Type}}","activityDate":"{{Activity.CreatedAt}}","contactId":"{{Activity.Contact.Id}}","visitorId":"{{Activity.Visitor.Id}}","visitorExternalId":"{{Activity.Visitor.ExternalId}}","assetType":"{{Activity.Asset.Type}}","assetName":"{{Activity.Asset.Name}}","rawData":"{{Activity.Field(RawData)}}"},"filter":"'{{Activity.Type}}'='FormSubmit' and '{{Activity.CreatedAt}}'>='2013-06-01' and '{{Activity.CreatedAt}}'<='2013-06-30'"}
Status Code : 201
Output JSON : {"name":"Bulk Activity Export","fields":{"activityId":"{{Activity.Id}}","assetId":"{{Activity.Asset.Id}}","activityType":"{{Activity.Type}}","activityDate":"{{Activity.CreatedAt}}","contactId":"{{Activity.Contact.Id}}","visitorId":"{{Activity.Visitor.Id}}","visitorExternalId":"{{Activity.Visitor.ExternalId}}","assetType":"{{Activity.Asset.Type}}","assetName":"{{Activity.Asset.Name}}","rawData":"{{Activity.Field(RawData)}}"},"filter":"'{{Activity.Type}}'='FormSubmit' and '{{Activity.CreatedAt}}'>='2013-06-01' and '{{Activity.CreatedAt}}'<='2013-06-30'","dataRetentionDuration":"PT1H","uri":"/activities/exports/74","createdBy":"CXDELQ.API","createdAt":"2014-11-03T09:40:00.9397930Z","updatedBy":"CXDELQ.API","updatedAt":"2014-11-03T09:40:00.9397930Z"}
2) Create Sync with status pending
URL : https://www02.secure.eloqua.com/API/Bulk/2.0/syncs
Input JSON : {"syncedInstanceUri":"/activities/exports/74","status":"pending"}
Status Code : 201
Output JSON : {"syncedInstanceUri":"/activities/exports/74","status":"pending","createdAt":"2014-11-03T09:41:18.2503138Z","createdBy":"CXDELQ.API","uri":"/syncs/90640"}
3) Get sync Result
URL : https://www02.secure.eloqua.com/API/Bulk/2.0/syncs/90640
Status Code : 200
Output JSON : {"syncedInstanceUri":"/activities/exports/74","syncStartedAt":"2014-11-03T09:41:20.6670000Z","syncEndedAt":"2014-11-03T09:41:23.1970000Z","status":"success","createdAt":"2014-11-03T09:41:18.1670000Z","createdBy":"CXDELQ.API","uri":"/syncs/90640"}
4) Get the data from API
URL : https://www02.secure.eloqua.com/API/Bulk/2.0/activities/exports/74/data?limit=1000&offset=0&count=1&depth=complete
Output JSON : "Output is high voulme, am not attaching here".
Please let me know is this will help you to reolve the issue.
Thanks,
Deepak Chincholi -
How to get planned date withrespect to Equipment
How to get planned date from maintenance plan withrespect to equipment
I.e when I pass Equipment number I need to have planned date and maintenance Plan and call numberI am sending screen shot of VIMHIS Table and also Maintenance plan Table
Maybe you are looking for
-
I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop. With trepidatio
-
My changes to a duplicated page are not syncing up in the Creative Cloud. How can I fix this?
I'm using Adobe Proto on an iPad. I created one page and successfully viewed it in the Creative Cloud. Then I duplicated that 1st page so I could work on the next page in that project. I made some changes to the 2nd page and then synced the project w
-
I have just upgraded from iTunes 7.6 to 7.7, everything worked fine under 7.6 but now in 7.7 my music won't play. I double-click on a song, it has the little speaker beside the song to say it's playing but the progress time doesn't move and no song.
-
Items can't be copied... because you don't have permission to read them; Lion to Win XP
I have seen that others have this problem, too. I can't find a solution that has worked. I am administrator on both source and dest volumes. I try to copy a file from the mac to the WinXP, and a dialog says "Finder wants to change something" and then
-
COWBHUWE : simple question for experts
How can I have HU in HU proposal for an order ? What are the previous step ? I tried to create HU for my material but they don't appeared in the list. Regards. Christophe