How to get accurate photo printouts using calibrated FlexScan S1932 , Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

How to get accurate photo printouts using FlexScan S1932 screen, Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

You need to work with the calibration parameters to get a good match from screen to print. There are no fixed values - basically whatever settings produce a match are the right ones.
First, set the white point - luminance and color - so that screen white is a visual equivalent to paper white. You can be very specific about this, with a viewing booth right next to the display and a particular paper as target. Or you can take a more generalistic approach. That too will usually work well, as long as you keep the aim in sight: screen white = paper white.
Don't trust the white point presets. You will usually have to adjust to compensate for your working environment. Make sure you can adjust both along the blue/yellow Kelvin scale and the green/magenta axis. Any given Kelvin value may well be wrong on the green/magenta axis.
Next set a realistic black point. This is important. Monitor manufacturers throw about completely unrealistic contrast ranges that you will never see on paper. A good glossy inkjet paper will be in the vicinity of 250-300:1, or a black point around 0.4 - 0.5 cd/m² if your white point is at 120. If you have a monitor that goes down to, say, 0.2, which most monitors today will, you're in for an unpleasant surprise.
Leave gamma at 2.2. Gamma is remapped from profile to profile and is "invisible" - the net result is always linear. You just want to stay close to native so that the monitor behaves at its best.
If you have a wide gamut monitor soft proofing in Photoshop can be useful. With a standard gamut monitor it's mostly a waste of time since monitor gamut is the limiting one.
Oh, and let Photoshop manage color. Make sure you have the right paper/ink profile and also make sure you have the right paper selected in the printer driver. This controls the total amount of ink.

Similar Messages

I broke my iPhone 5 now using a 4 but don't know if or how to get my photos ect..from the 5 to the 4.can I do this and how plse help

I broke my iPhone 5 now using a 4 but don't know if or how to get my photos ect..from the 5 to the 4.can I do this and how plse help

Restore the backup of your iPhone 5 to your iPhone 4. It will contain your camera roll photos.
To do this, first make sure the iPhone 4 is running the same or higher version of iOS as your iPhone 5 was. If it isn't, you'll need to update it first. Then, to restore the iCloud backup, you'll have to begin by erasing the iPhone 4. If you have any newer data on the iPhone 4 that is not contained in the iPhone 5 backup, you'll need to save that first. When you're ready, go to Settings>General>Reset, tap Erase All Content and Settings, then go through the set screens on the iPhone 4 and when given the option, choose Restore from iCloud backup and follow the prompt, choosing the backup of your iPhone 5 to restore to. Be sure it is connected to wifi and your charger as it is restoring the backup.

How to get jpg photo into photoshop as jpg wt LR changes

I can not determine how to get jpg photos from Lightroom into Photoshop CS3 without using the export function. With a raw photo I can simply press "clrl e" and the raw photo is converted into a tif or psd file and sent to photoshop. That is very convenient when you have worked on the photo and wish to make additional adjustments in CS3. When I do the same process with a jpg file, it converts the file from jpg into a tif at a much larger file size then necessary. Is there a way to get a jpg file which I have worked on within Lightroom into CS3 without using the export function? Thanks, Arthur

Lee Jay, I think you are wrong this time (only)!
Arthur, to solve your problem you have to do two things:
1. In LR open preferences and activate to automatically write changes to XMP. This ensures that your JPG pictures are updated with the LR settings in the XMP container within the jpg file.
2.in PSCS3 open preferences. In the file handling section you will find the option to 'prefer Adobe Camera Raw for JPEG files'. If this option is activated also jpg files are processed with ACR.
You asked for a way to get a jpg file into CS3 without using export. Now you have that. After you made your adjustments in LR just open the jpg in CS3 and you will see the photo with all changes you have made. I tested this with LR and CS3 beta myself it it works perfectly.

How to get web application to use Tuscany without conflicting with SAP SDO

Hi,
We are attempting to run a web application on SAP NetWeaver CE 7.1 SP1 which uses Tuscany SDO. As it now stands We must use Tuscany because the web application will not run with the SAP SDO implementation provided by Netweaver. To ensure that Tuscany is loaded with priority, we have packaged the Tuscany JAR files and their dependencies as a heavy resource, as described here:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60642a88-95fe-2b10-d387-a245d48fc257?overridelayout=true
The final check showed that Tuscany was correctly deployed as a heavy resource and included the following JAR files:
common-2.2.3.jar
ecore-2.2.3.jar
ecore-change-2.2.3.jar
ecore-xmi-2.2.3.jar
tuscany-sdo-impl-1.1.1.jar
tuscany-sdo-lib-1.1.1.jar
tuscany-sdo-tools-1.1.1.jar
xsd-2.2.3.jar
We also verified that the web application using Tuscany has a hard reference to the Tuscany heavy resource.
However, when we try to run the web application, the following error is logged: java.lang.LinkageError: Class commonj/sdo/DataGraph violates loader constraints
The issue is definitely due to some kind of classloading conflict with the SAP SDO library, as the application runs normally when SAP SDO is manually removed from the classpath. Doing this on a production system is unfortunately not an option, though.
So the question is: how to get web application to use Tuscany without conflicting with SAP SDO?

I took a look at the "printerReady" example. Looks like I may be able to use the InetPing (...) function to ping through a range of IP addresses looking for a response.
Any ideas on how to find the MAC address associated with the IP addresses that respond?
We may have multiple units responding and the MAC address will allow the operator to determing which unit to connect to.
I'll try the InetPing to see how it works,
Kirk

Since I upgraded to os 5.1 for my iPhone I can no longer type in reminders. Any suggestions how to get around having to use siri for reminders?

since I upgraded to os 5.1 for my iPhone I can no longer type in reminders. Any suggestions how to get around having to use siri for reminders?

Unfortunately, I have a very similar problem. Since I upgraded to os 5.1 on my new iPhone 4S the reminders screen will not add new reminders or scroll up and down. What's more strange is the screen will still scroll side to side allowing access to the Completed list, and both the Completed list and Date functions work normally so this must be an upgrades glitch.

How to get default values while using the transaction "BP"

Hi Group,
I have a query on how to get default values while using the transaction <b>BP</b>?
The thing is:
when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
how can I achieve this?
So please kindly let me know the procedure to achieve this.
Thanks & Regards,
Vishnu.

Hi,
The events of BDT can be used to default some fields on creating a partner.
For this create a function module for ISDAT. attach that event in BUS7.
In the ISDAT funtion modulethe following code should be used.
For example to set the nationality:
I_BUSDEFAULT-NATIO = 'DE.
CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
EXPORTING
i_busdefault = I_BUSDEFAULT
Regards, Smita.

How do I get my photos from a previous version of Photoshop Elements (6) into Photoshop Elements 12?

How do I get my photos from a previous version of Photoshop Elements (6) into Photoshop Elements 12? Do I restore from a backup? I have over 12,000 pics ( a good portion with multiple versions) and don't want to lose captions and metadata. Thank you in advance for your help.

If this is on the same computer just install PSE 12. It should find your old catalog and upgrade it to PSE 12. If for some reason it doesn't, then go to file>manage catalogs, find your old catalog and tell PSE 12 to convert it.
If this is a new computer, then yes, full backup and restore.

How to get a field that using variable in order to create a query

Hi,
I found a difficulty when creating a query. so, I would like to ask you some question.
1. How to get a field that using variable which that field I want to put it in my query?
For example, I would like to take quantity field in inventory audit report. And when I put my cursor in
quantity field, there was only variable, item, etc. How to get this and put it in query?
2. How to combined the invoice quantity with inventory audit report quantity?
3. I have a query like this:
SELECT distinct T0.[DocDate] as 'Tanggal', T0.[DocNum] as 'No.Faktur', T1.[ItemCode] as 'Kode Barang',
T1.[Dscription] as 'Deskripsi', T1.[Quantity] as 'Quantity', ((T1.[LineTotal])/(T1.[Quantity])) as 'Harga
Satuan', T1.[LineTotal] as 'Harga Total', T3.[CalcPrice] as 'HPP Satuan', ((T3.[CalcPrice]) * (T1.
[Quantity])) as 'HPP Total', T4.[ItmsGrpNam] as 'Jenis Barang', T5.[SlpName] as 'Nama Sales', T1.
[WhsCode] as 'Kode Gudang' FROM [dbo].[OINV] T0 INNER JOIN [dbo].[INV1] T1 ON T0.DocEntry =
T1.DocEntry INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OINM T3 ON T2.ItemCode
= T3.ItemCode INNER JOIN OITB T4 ON T2.ItmsGrpCod = T4.ItmsGrpCod INNER JOIN OSLP T5 ON
T0.SlpCode = T5.SlpCode WHERE T3.[TransType] = '13' and T3.[CreatedBy] = T1.[DocEntry] and T0.
[DocDate] >=[%0] and T0.[DocDate] <=[%1] and T4.[ItmsGrpNam] =[%2] and T1.[WhsCode] =[%3]
Is it possible if I just take one invoice with invoice quantity and only show up at once although I have a
lot item cost for that item? (because I'm using FIFOmethod).
Please help me.. cause I'm stuck with this thing :l.
Thank you very much, and I'm waiting your respon soon.
Regards,
Sisca

Try this one:
SELECT distinct T0.DocDate as 'Tanggal', T0.DocNum as 'No.Faktur', T1.ItemCode as 'Kode Barang',
T1.Dscription as 'Deskripsi', T1.Quantity as 'Quantity', ((T1.LineTotal)/(T1.Quantity)) as 'Harga
Satuan', T1.LineTotal as 'Harga Total', T3.CalcPrice as 'HPP Satuan', ((T3.CalcPrice) * (T1.
Quantity)) as 'HPP Total', T4.ItmsGrpNam as 'Jenis Barang', T5.SlpName as 'Nama Sales', T1.
WhsCode as 'Kode Gudang'
FROM dbo.OINV T0 INNER JOIN dbo.INV1 T1 ON T0.DocEntry =T1.DocEntry
INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode
INNER JOIN OINM T3 ON T2.ItemCode = T3.ItemCode AND T3.TransType = '13' and T3.CreatedBy = T1.DocEntry AND T3.Warehouse = T1.WhsCode
INNER JOIN OITB T4 ON T2.ItmsGrpCod = T4.ItmsGrpCod
INNER JOIN OSLP T5 ON T0.SlpCode = T5.SlpCode
WHERE T0.DocDate >=[%0\] and T0.DocDate <=[%1\] and T4.ItmsGrpNam =[%2\] and T1.WhsCode =[%3\]
Thanks,
Gordon

How to get a photo into photo browser

how do you get a photo into the photo browser box

I have same problem. I could only see a fraction of my project photos if I browse the Aperture lbrary. It is the same problem when I sync the aperture photos to my iPhone or iPad. I still cannot solve it but I know a way to go around it for your iMovie to see the pictures so that you can work on your iMovie.
Here is the work around:
Export the photos from your album to your hard disk and re-import into your iPhoto. Now you should be able to see those photos that you want to work on in iMovie when you browse your iPhot library.

How to get list of tables used in packages

Dear All
Can you pls tell me how to get list of tables used in packages
Regards

select referenced_name
from user_dependencies
where name = 'your_package'
and referenced_type = 'TABLE'Regards,
Rob.

I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

How to get pivot table by using dates

Hi,
How to get pivot table by using dates in column.
Below is the sample table and its value is given.
create table sample1
Order_DATE       DATE,
order_CODE       NUMBER,
Order_COUNT   NUMBER
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),1,232);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),2,935);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),3,43);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),4,5713);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),5,11346);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),1,368);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),2,1380);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),3,133);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),4,7109);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),5,14336);
select * from sample1;So how to get the data like below.
          order_date
order_code 30-sep-12 29-sep-12
1 232 368
2 935 1380
3 43 133
4 5713 7109
5 11345 14336

Using the extra data I inserted in my previous reply:select ORDER_CODE,
SUM(DECODE(extract (month from ORDER_DATE),1,ORDER_COUNT,0)) JAN,
SUM(DECODE(extract (month from ORDER_DATE),2,ORDER_COUNT,0)) FEB,
SUM(DECODE(extract (month from ORDER_DATE),3,ORDER_COUNT,0)) MAR,
SUM(DECODE(extract (month from ORDER_DATE),4,ORDER_COUNT,0)) APR,
SUM(DECODE(extract (month from ORDER_DATE),5,ORDER_COUNT,0)) MAY,
SUM(DECODE(extract (month from ORDER_DATE),6,ORDER_COUNT,0)) JUN,
SUM(DECODE(extract (month from ORDER_DATE),7,ORDER_COUNT,0)) JUL,
SUM(DECODE(extract (month from ORDER_DATE),8,ORDER_COUNT,0)) AUG,
SUM(DECODE(extract (month from ORDER_DATE),9,ORDER_COUNT,0)) SEP,
SUM(DECODE(extract (month from ORDER_DATE),10,ORDER_COUNT,0)) OCT,
SUM(DECODE(extract (month from ORDER_DATE),11,ORDER_COUNT,0)) NOV,
SUM(DECODE(extract (month from ORDER_DATE),12,ORDER_COUNT,0)) DEC
from SAMPLE1
where trunc(order_date, 'YY') = trunc(sysdate, 'YY')
group by order_code
order by order_code;
ORDER_CODE JAN FEB MAR APR MAY JUN JUL AUG   SEP   OCT NOV DEC
         1   0   0   0   0   0   0   0   0   600   600   0   0
         2   0   0   0   0   0   0   0   0 2315 2315   0   0
         3   0   0   0   0   0   0   0   0   176   176   0   0
         4   0   0   0   0   0   0   0   0 12822 12822   0   0
         5   0   0   0   0   0   0   0   0 25682 25682   0   0Now a bit of explanation.
1) Whenever you pivot rows to columns, no matter what version of Oracle and no matter what method you use, you have to decide in advance how many columns you are going to have and what the names of the columns are. This is a requirement of the SQL standard.
2) I use the WHERE clause to get just the data for this year
3) With EXTRACT, I get just the month without the year.
4) Using DECODE, I put every month's data into the correct column
5) Once I do all that, I can just GROUP BY order_code while SUMming all the data for each month.

How do I get my photos on my iMac sent to my iPad and iPhone? Nothing seems to work.

How do I get my photos on my iMac sent to my iPad and iPhone? Nothing seems to work. hurtalert

Is your iMac the computer you normally sync your iPad to?
If so put your photos into albums in iphoto on your imac. Then start iTunes on your iMac and connect your iPad to your iMac. In iTunes on your iMac select your iPad in the left column and selectPhotos in the right column. Scroll down and select the photo albums you want on your iPad. Then select Apply in the lower right corner of iTunes. This will load the sleuthed photo albums onto your iPad. Do the same for iPhone.

Help , How to get data from database using recordset with UI API

I want to get a data from database
when I want to create recordset i notice that UI API didn't has record set
so I created recordset using DI API (SAPbobscom.recordset and SAPbobscom.company)
======================================================
Dim oCompanyUI As SAPbouiCOM.Company <<UI API
Dim oRecSet As New SAPbobsCOM.Recordset << DI API
Dim oCompanyDI As New SAPbobsCOM.Company << DI API
'=====================================================
oCompanyDI.Connect
Set oRecSet = oCompanyDI.GetBusinessObject(BoRecordset)
oRecSet.DoQuery ("SELECT T0.CardCode, T0.CardName FROM OCRD T0")
SBO_Application.MessageBox oRecSet.Fields.Item(1).Value
======================================================
but I got an error it said "you are not connected to company"
I'm really don't have an idea about how to get a data from using UI API (exp I want to get a date or costumer code)
can someone help me please, I really need it
Thanks

you need a single sign on
        Dim oDICompany As SAPbobsCOM.Company
        Dim sCookie As String
        Dim sConnStr As String
        Dim ret As Integer
        oDICompany = New SAPbobsCOM.Company
        sCookie = oDICompany.GetContextCookie
        sConnStr = SBO_Application.Company.GetConnectionContext(sCookie)
        If oDICompany.Connected Then
            oDICompany.Disconnect()
        End If
        ret = oDICompany.SetSboLoginContext(sConnStr)
        If Not ret = 0 Then
            SBO_Application.MessageBox("set Login Context failed!")
            Exit Sub
        End If
        ret = oDICompany.Connect()
        If Not ret = 0 Then
            SBO_Application.MessageBox("Company Connect failed!")
        End If

How to get certain applied styles using script?

Hi All,
I need to know how to get certain applied styles using ID Scripting. I don't have much experience in InDesign so need some help.
Here is a screenshot with a sample text with the said styles applied and highlighted.
I need to know what texts in my document have these styles applied like All Caps, Strikethrough, Underline, Subscript and Superscript etc.
Please help.
Thanks!

Hi Poortip87
The first thing you have to understand is how to refer to "where" you want to apply the style.
If you want the script to apply the style to the selected text then you would use for example app.selection[0].strikeThru = true;
If you for example want to underline the last word of the first paragraph of the first story you would use app.activeDocument.stories[0].paragraphs[0].words[-1].underline = true;
If you just wanted the first letter of that word underlined then you would add .characters[0] after the words[-1]
To for example apply All Caps to all the text in all the stories you would use
app.activeDocument.stories.everyItem().texts[0].capitalization = Capitalization.ALL_CAPS;
The easiest way to find how to set properties to a selections is to set them manually and make the selection and then run the script below.
You should be able to find all the properties you want very easily after running the script.
Or you can use Jongwares excellent reference guide. Indesign JavaScript Help
HTH
Trevor
// script to show most of the selection properties by Trevor
// Creative-Scripts.Com (Still not ready!) available (sometimes) for custom scripts $$$
// scripts {at} Creative-Scripts [dot] Com
$.level = 0; // set debug mode to allow try catch (not read only as stated in manual);
if (!app.selection.length) exit();
var c = 0, s = app.selection[0], p,
      a = [], n, er;
for (n in s) {
    try {
        p = s[n];
        if (p && p.constructor.name === "Enumerator") p = getEnum(p ,n);
        a[c++] = n + ": " + p;
    } catch (er) {a[c++] = n + ": ???"}
var f = new File (Folder.temp + +(new Date) + ".txt");
f.open('r');
f.encoding = "UTF-8";
f.lineFeed = ($.os[0]=="M") ? "Macintosh" :" Windows";
f.open('w');
f.write("\uFEFF" + a.join("\r"));
f.close();
$.sleep(300);
f.execute(true);
function getEnum (q, n) {
    var enums = ["AcrobatCompatibility",
    "AddPageOptions",
    "AdornmentOverprint",
    "AlignDistributeBounds",
    "AlignOptions",
    "AlignmentStyleOptions",
    "AlternateGlyphForms",
    "AlternatingFillsTypes",
    "AnchorPoint",
    "AnchorPosition",
    "AnchoredRelativeTo",
    "AnimationEaseOptions",
    "AnimationPlayOperations",
    "AntiAliasType",
    "ArrangeBy",
    "ArrowHead",
    "AssetType",
    "AssignmentExportOptions",
    "AssignmentStatus",
    "AutoEnum",
    "AutoSizingReferenceEnum",
    "AutoSizingTypeEnum",
    "BalanceLinesStyle",
    "BaselineFrameGridRelativeOption",
    "BaselineGridRelativeOption",
    "BehaviorEvents",
    "BevelAndEmbossDirection",
    "BevelAndEmbossStyle",
    "BevelAndEmbossTechnique",
    "BindingOptions",
    "BitmapCompression",
    "BlendMode",
    "BlendingSpace",
    "BookContentStatus",
    "BookletTypeOptions",
    "BoundingBoxLimits",
    "BuildingBlockTypes",
    "BulletCharacterType",
    "BulletListExportOption",
    "Capitalization",
    "ChangeBackgroundColorChoices",
    "ChangeCaseOptions",
    "ChangeConditionsModes",
    "ChangeMarkings",
    "ChangeTextColorChoices",
    "ChangeTypes",
    "ChangebarLocations",
    "ChangecaseMode",
    "ChapterNumberSources",
    "CharacterAlignment",
    "CharacterCountLocation",
    "CharacterDirectionOptions",
    "ClippingPathType",
    "ColorModel",
    "ColorOutputModes",
    "ColorRenderingDictionary",
    "ColorSettingsPolicy",
    "ColorSpace",
    "ComposeUsing",
    "CompressionQuality",
    "ConditionIndicatorMethod",
    "ConditionIndicatorMode",
    "ConditionUnderlineIndicatorAppearance",
    "ContainerType",
    "ContentType",
    "ContourOptionsTypes",
    "ConvertPageBreaks",
    "ConvertShapeOptions",
    "ConvertTablesOptions",
    "CoordinateSpaces",
    "CopyrightStatus",
    "CornerOptions",
    "CreateProxy",
    "CrossReferenceType",
    "CursorTypes",
    "CustomLayoutTypeEnum",
    "DataFormat",
    "DefaultRenderingIntent",
    "DesignOptions",
    "DiacriticPositionOptions",
    "DigitsTypeOptions",
    "DimensionsConstraints",
    "DisplayOrderOptions",
    "DisplaySettingOptions",
    "DistributeOptions",
    "DocumentIntentOptions",
    "DocumentPrintUiOptions",
    "DynamicDocumentsJPEGQualityOptions",
    "DynamicDocumentsTextExportPolicy",
    "DynamicMediaHandlingOptions",
    "DynamicTriggerEvents",
    "EPSColorSpace",
    "EPSImageData",
    "EditingState",
    "EmptyFrameFittingOptions",
    "EndCap",
    "EndJoin",
    "EpubCover",
    "EpubVersion",
    "EventPhases",
    "ExportFormat",
    "ExportLayerOptions",
    "ExportOrder",
    "ExportPresetFormat",
    "ExportRangeOrAllPages",
    "FeatherCornerType",
    "FeatherMode",
    "FeatureSetOptions",
    "FindChangeTransliterateCharacterTypes",
    "FirstBaseline",
    "FitDimension",
    "FitMethodSettings",
    "FitOptions",
    "Fitting",
    "FlattenerLevel",
    "Flip",
    "FlipValues",
    "FloatingWindowPosition",
    "FloatingWindowSize",
    "FollowShapeModeOptions",
    "FontDownloading",
    "FontEmbedding",
    "FontStatus",
    "FontTypes",
    "FootnoteFirstBaseline",
    "FootnoteMarkerPositioning",
    "FootnoteNumberingStyle",
    "FootnotePrefixSuffix",
    "FootnoteRestarting",
    "GIFOptionsPalette",
    "GlobalClashResolutionStrategy",
    "GlobalClashResolutionStrategyForMasterPage",
    "GlowTechnique",
    "GoToZoomOptions",
    "GradientType",
    "GridAlignment",
    "GridViewSettings",
    "GuideTypeOptions",
    "HeaderFooterBreakTypes",
    "HeaderTypes",
    "HorizontalAlignment",
    "HorizontalOrVertical",
    "HyperlinkAppearanceHighlight",
    "HyperlinkAppearanceStyle",
    "HyperlinkAppearanceWidth",
    "HyperlinkDestinationPageSetting",
    "ICCProfiles",
    "IconSizes",
    "ImageAlignmentType",
    "ImageConversion",
    "ImageDataTypes",
    "ImageExportOption",
    "ImageFormat",
    "ImagePageBreakType",
    "ImageResolution",
    "ImageSizeOption",
    "ImportFormat",
    "ImportPlatform",
    "ImportedPageCropOptions",
    "InCopyUIColors",
    "IndexCapitalizationOptions",
    "IndexFormat",
    "InkTypes",
    "InnerGlowSource",
    "InteractiveElementsOptions",
    "InteractivePDFInteractiveElementsOptions",
    "JPEGOptionsFormat",
    "JPEGOptionsQuality",
    "JoinOptions",
    "JpegColorSpaceEnum",
    "Justification",
    "KashidasOptions",
    "KentenAlignment",
    "KentenCharacter",
    "KentenCharacterSet",
    "KinsokuHangTypes",
    "KinsokuSet",
    "KinsokuType",
    "LanguageAndRegion",
    "LayoutRuleOptions",
    "Leading",
    "LeadingModel",
    "LibraryPanelViews",
    "LineAlignment",
    "LineSpacingType",
    "LinkStatus",
    "ListAlignment",
    "ListType",
    "LiveDrawingOptions",
    "Locale",
    "LocationOptions",
    "LockStateValues",
    "MapType",
    "MarkLineWeight",
    "MarkTypes",
    "MatrixContent",
    "MeasurementUnits",
    "MojikumiTableDefaults",
    "MonoBitmapCompression",
    "MoviePlayOperations",
    "MoviePosterTypes",
    "NestedStyleDelimiters",
    "NoteBackgrounds",
    "NoteColorChoices",
    "NothingEnum",
    "NumberedListExportOption",
    "NumberedParagraphsOptions",
    "NumberingStyle",
    "OTFFigureStyle",
    "ObjectTypes",
    "OpenOptions",
    "OpenTypeFeature",
    "OutlineJoin",
    "OverrideType",
    "PDFColorSpace",
    "PDFCompressionType",
    "PDFCrop",
    "PDFJPEGQualityOptions",
    "PDFMarkWeight",
    "PDFProfileSelector",
    "PDFRasterCompressionOptions",
    "PDFXStandards",
    "PNGColorSpaceEnum",
    "PNGExportRangeEnum",
    "PNGQualityEnum",
    "PPDValues",
    "PageBindingOptions",
    "PageColorOptions",
    "PageLayoutOptions",
    "PageNumberPosition",
    "PageNumberStyle",
    "PageNumberingOptions",
    "PageOrientation",
    "PagePositions",
    "PageRange",
    "PageReferenceType",
    "PageSideOptions",
    "PageTransitionDirectionOptions",
    "PageTransitionDurationOptions",
    "PageTransitionOverrideOptions",
    "PageTransitionTypeOptions",
    "PageViewOptions",
    "PaginationOption",
    "PanelLayoutResize",
    "PanningTypes",
    "PaperSize",
    "PaperSizes",
    "ParagraphDirectionOptions",
    "ParagraphJustificationOptions",
    "PathType",
    "PathTypeAlignments",
    "PdfMagnificationOptions",
    "PerformanceMetricOptions",
    "PlacedVectorProfilePolicy",
    "PlayOperations",
    "PointType",
    "Position",
    "PositionalForms",
    "PostScriptLevels",
    "PreflightLayerOptions",
    "PreflightProfileOptions",
    "PreflightRuleFlag",
    "PreflightScopeOptions",
    "PreviewPagesOptions",
    "PreviewSizeOptions",
    "PreviewTypes",
    "PrintLayerOptions",
    "PrintPageOrientation",
    "Printer",
    "PrinterPresetTypes",
    "Profile",
    "ProofingType",
    "RangeSortOrder",
    "RasterCompressionOptions",
    "RasterResolutionOptions",
    "RecordSelection",
    "RecordsPerPage",
    "RenderingIntent",
    "RepaginateOption",
    "ResizeConstraints",
    "ResizeMethods",
    "ResolveStyleClash",
    "RestartPolicy",
    "RotationDirection",
    "RowTypes",
    "RubyAlignments",
    "RubyKentenPosition",
    "RubyOverhang",
    "RubyParentSpacing",
    "RubyTypes",
    "RuleDataType",
    "RuleWidth",
    "RulerOrigin",
    "SWFBackgroundOptions",
    "SWFCurveQualityValue",
    "Sampling",
    "SaveOptions",
    "ScaleModes",
    "Screeening",
    "ScreenModeOptions",
    "ScriptLanguage",
    "SearchModes",
    "SearchStrategies",
    "SelectAll",
    "SelectionOptions",
    "Sequences",
    "ShadowMode",
    "SignatureSizeOptions",
    "SingleWordJustification",
    "SmartMatchOptions",
    "SnapshotBlendingModes",
    "SortAssets",
    "SoundPosterTypes",
    "SourceFieldType",
    "SourceSpaces",
    "SourceType",
    "SpanColumnCountOptions",
    "SpanColumnTypeOptions",
    "SpecialCharacters",
    "SpreadFlattenerLevel",
    "StartParagraph",
    "StateTypes",
    "StaticAlignmentOptions",
    "StoryDirectionOptions",
    "StoryHorizontalOrVertical",
    "StoryTypes",
    "StrokeAlignment",
    "StrokeCornerAdjustment",
    "StrokeFillProxyOptions",
    "StrokeFillTargetOptions",
    "StrokeOrderTypes",
    "StyleConflict",
    "StyleSheetExportOption",
    "SyncConflictResolution",
    "TabStopAlignment",
    "TableDirectionOptions",
    "TableFormattingOptions",
    "TagRaster",
    "TagTextExportCharacterSet",
    "TagTextForm",
    "TagTransparency",
    "TagType",
    "TagVector",
    "TaggedPDFStructureOrderOptions",
    "TaskAlertType",
    "TaskState",
    "TextExportCharacterSet",
    "TextFrameContents",
    "TextImportCharacterSet",
    "TextPathEffects",
    "TextStrokeAlign",
    "TextTypeAlignments",
    "TextWrapModes",
    "TextWrapSideOptions",
    "ThumbsPerPage",
    "TilingTypes",
    "ToolTipOptions",
    "ToolsPanelOptions",
    "TrapEndTypes",
    "TrapImagePlacementTypes",
    "Trapping",
    "UIColors",
    "UITools",
    "UndoModes",
    "UpdateLinkOptions",
    "UserInteractionLevels",
    "VariableNumberingStyles",
    "VariableScopes",
    "VariableTypes",
    "VersionCueSyncStatus",
    "VersionState",
    "VerticalAlignment",
    "VerticalJustification",
    "VerticallyRelativeTo",
    "ViewDisplaySettings",
    "ViewZoomStyle",
    "WarichuAlignment",
    "WatermarkHorizontalPositionEnum",
    "WatermarkVerticalPositionEnum",
    "WhenScalingOptions",
    "XFLRasterizeFormatOptions",
    "XMLElementLocation",
    "XMLElementPosition",
    "XMLExportUntaggedTablesFormat",
    "XMLFileEncoding",
    "XMLImportStyles",
    "XMLTransformFile",
    "ZoomOptions"];
    var l = enums.length,
        s = q.toString(), e, er, a;
    while (l--) {
        try {
            e = $.global [enums[l]];
            if (e.hasOwnProperty (s) && q === e[s]) {
                a = e.reflect.properties;
                a.pop();
                a = (a.length < 2) ? "" : "\r[Possible " + enums[l]+ " Enumerations for " + n + "]:\r" + enums[l] + "." + a.join ("\r" + enums[l] + ".");
                return enums[l] + "." + q.toString () + a;
        catch (er) {};
    return "???." + q.toString ();

How to get accurate photo printouts using calibrated FlexScan S1932 , Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

Similar Messages

Maybe you are looking for