How to get ACS3.2 to assign different attributes for multiples NAS's

We are running ACS3.2 and have 3 different types of NAS for each group of users (two managed dial solutions and 1 home grown VPN concentrator solution).
The problem is that the two dialup NAS's require different RADIUS attributes for the IP address assignment: one NAS uses a named pool, the other NAS assigns the pool based on an IP entry in attribute 8 (framed IP address). Users mapped to one ACS group must be able to use both dial services.
Is it possible to configure ACS so that one type of attribute is used for one NAS and another type of attribute for the other for users belonging to the same group?
Thanks,
Matt

Hmm, I thought you might say that:(
I've done a bit of jiggery pokery and will be doing some testing tomorrow.
I'll post back to this forum to let you know how it goes.
Matt

Similar Messages

  • Different currencies for multiple line items in a AP invoice?

    Hi, Expert,
    Is it possible to assign different currencies for multiple line items in a AP invoice?
    Eg:
    One vendor is supplying raw materials from different regions, and we have to raise one invoice with different currency rate  to each items 
    regards,
    Sanju

    Hi Sanju,
    It is not possible to assign different currencies for multiple line items in a AP invoice.
    Try to book the different documents(different correncies for a single vendor in a A/P Invoice).
    Regards,
    Madhan.

  • How to get the value assigned in dropdowmlistbox as well as radio button

    Hi Everybody,
       Please help me to find the solution for the following:
       1. How to get the value assigned in dropdowmlistbox?
       2. How to get the value assigned in radio button?
      I am waiting for the answer and reply...
      Thanks & Regards,
      ShanthaKumar.KA.

    The radio button has a name attribute. That name attribute should be the same as the bean property. Then you just need a
    <jsp:setProperty name="mybean" property="*"/>
    and the bean's set method will be called for the value of that radio button.
    so...
    <input type="radio" name="doit"/>
    class MyBean
    public void setDoit( boolean yes )
    //do whatever here
    }

  • Can we get a output in different languages for the same configuration

    Hi All,
    Can we get a output in different languages for the same configuration done in NACE. or it is language specific.
    They have symbols which have values both in german and english. But when we run the transaction we are getting the output only in german language.We want the out put in english
    language.
    Thanks in Advance.
    Rajesh

    A Smartform can be maintained in many languages other than the language that it is created. Translations for the texts have to be maintained for this purpose.
    To maintain the translations:
    Go to transaction SE63 in R/3.
    Go to menu Translation->R/3 Enterprise->Other Long Texts
    Select the object type in the pop up. Smartform(SSF) object type is found under Forms and Styles(FS).
    Enter the name of the Smart form and choose the source and target language. This would open a screen with the Smartform code in Source language on the top and an editor with the same code in the bottom.
    Find the text for which you need to maintain the translation and insert the translation in that place. As usual after required texts are maintained Save and Activate.
    To see the translated Smartform create an output type and assign the smartform and the driver program to this output type. In the transaction that sends output to this smartform, select the output type and select the language in which the smartform has to be displayed (translations have to be maintained in this lanuage).This will give the smartform in the required language.
    Madhavi

  • How to get the data from pcl2 cluster for TCRT table.

    Hi frndz,
    How to get the data from pcl2 cluster for tcrt table for us payroll.
    Thanks in advance.
    Harisumanth.Ch

    PL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
    ~Suresh

  • How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "?

    Hello SAP Guru's,
    How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "? We have implemented SAP ECC 6.0 EHP4 version in the organization. If anybody have any idea, need help .
    Thanks in Advance.
    Prashant Kunjir

    Have a look at the following note:-
    Note 1573200 - How to restructure the statistic data of the sales information system (SIS)
    But before trying to carry out the process as detailed in the above note, first check with other SIS reports like MCTA etc., and no reports are showing correctly, then you can proceed.  Otherwise, you need to raise an OSS message with SAP.
    G. Lakshmipathi

  • Since I upgraded to os 5.1 for my iPhone I can no longer type in reminders. Any suggestions how to get around having to use siri for reminders?

    since I upgraded to os 5.1 for my iPhone I can no longer type in reminders. Any suggestions how to get around having to use siri for reminders?

    Unfortunately, I have a very similar problem. Since I upgraded to os 5.1 on my new iPhone 4S the reminders screen will not add new reminders or scroll up and down. What's more strange is the screen will still scroll side to side allowing access to the Completed list, and both the Completed list and Date functions work normally so this must be an upgrades glitch.

  • How to get the file size (in bytes) for all files in a directory?

    How to get the file size (in bytes) for all files in a directory?
    The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
    Furthermore the size is not retrieved correctly.
    How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
    Thank you
    Peter
    java.io.File f = new java.io.File("D:/todo/");
    files = f.list();
    for (int i = 0; i < files.length; i++) {
    System.out.println("fn=" + files);
    if (new File(files[i]).isFile())
         System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }

    pstein wrote:
    ...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
    Here is an SSCCE.
    import java.io.File;
    class ListFiles {
        public static void main(String[] args) {
            java.io.File f = new java.io.File("/media/disk");
            // provides only the file names, not the path/name!
            //String[] files = f.list();
            File[] files = f.listFiles();
            for (int i = 0; i < files.length; i++) {
                System.out.println("fn=" + files);
    if (files[i].isFile()) {
    System.out.println(
    "file[" +
    i +
    "]=" +
    files[i] +
    " size=" +
    (files[i]).length() );
    }Edit 1:
    Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting.   To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form.  It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
    Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • How to get purchase organization,  PAYMENT_TERMS and INCO_TERMS for vendor?

    Dear friends,
    How to get purchase organization,  PAYMENT_TERMS and INCO_TERMS for a vendor(LIFNR)? I couldn't fine these data in LFA1 table.
    Thanks a lot!

    Hi,
    You can find ZTERM(Terms of Payment) in LFB1 table for a particular vendor (LIFNR) and company code.
    and Incoterms INCO1 in LFM1 table for a particular vendor (LIFNR) and purchase organisation.
    Hope this answers your query.
    Regards,
    Brajvir

  • How to get the elements out of a for loop simultaneously during the loop execution

    Hi, 
    I am student. I would like to know how to get the counter values outside the For loop parallely while the loop runs rather that getting the finally value outside the For loop. Looking forward for answers.
    Thanks,
    Athira
    Solved!
    Go to Solution.

    You could use a notifier (since it is a single value) or a reference (with a property node) to a control that gets the value elsewhere in another VI.
    If it is within the same VI, you could use a property node (right click > create > property node > value) from the control within the same VI located outside the loop.
    If you promiss NOT to abuse the use of Local Variables, you could use that to only write from ONE location within the For Loop to a control outside the loop, similar to the property node mentionned earlier.  (Of course, I will be struct by lightening for mentionning that and scolded by other LabVIEW coders for having a change of heart on the use of Locals....  Shivers are already crawling up my spine).
    You could use a queue, but that might be an overkill, unless:  the count is generated faster than it is being read elsewhere...
    As crossrulz mentionned, can you describe what you will be doing with the count?  Because synchronizing data (fresh / stale / etc) is very important within LabVIEW as it executes based on dataflow rather than a sequential order.
    Hope this helps. 
    EDIT: 
    You have not fully provided the answer.  We figured that much of your code from your description, but what is reading the value of the count?  Is it in a separate loop?  If not, it may only deal with the first value, which is likely 0.  The proper advice depends on how you process the received data (count).

  • New document alert: How to get PDF documents into Adobe Reader for iOS

    Opening PDF Files in Reader for iOS (iPhone and iPad) has been very helpful to many users of Adobe Reader for iOS.  However, Apple has drastically changed the user interface in iOS 7, which made the original document obsolete. 
    According to Apple Developer Support's App Store Distribution page, 89% of devices connected to the App Store are using iOS 7 during a 7‑day period ending June 29, 2014.
    Because of the exceptionally high iOS 7 adoption rate, Adobe Reader for iOS version 11.3 now supports iOS 7 only.
    Here are the new How-To documents for iOS 7.
    How to get PDF documents into Adobe Reader for iOS (iPad on iOS 7 version)
    How to get PDF documents into Adobe Reader for iOS (iPhone on iOS 7 version)
    (It had to be split into two separate documents because each contains way too many screenshots.)
    Hope these documents are as helpful as the original one.
    Please let us know if you have any feedback or suggestions on the topics for other help documents/tutorials.

    Dennis (or any Adobe rep),
    Any updates to the OP's question? I'm with a large government agency, and we're moving away from GoodReader for reasons I can't go into here, and the ability to add user-defined bookmarks within the app is a mandatory feature for the document reader we select. I have the latest version of Adobe Reader (11.6.1) installed on my government iPad, and the ability to add user-defined bookmarks still seems to be missing. Does Adobe have any plans to add this feature, or is it already present and I'm simply overlooking it?
    Thanks,
    Cam

  • I accidentally deleted my iMovie off my mac, anyone know how to get it back because it came for free and is now 15 dollars to buy back??? pls help

    i accidentally deleted my iMovie off my mac, anyone know how to get it back because it came for free and is now 15 dollars to buy back??? pls help

    If you mean you accidentally removed the icon for iMovie from the Dock (the array of icons at the bottom of the window), you can add it back easily.
    Open the Applications folder (if you open it from the Dock you may then need to click the Open in Finder icon), locate the iMovie program.
    Drag the icon for iMovie down to the Dock, somewhere between the icon for Finder and the dashed line toward the right.
    Wait for the icons at that spot to move aside, then drop it in.

  • How to get text lables in x axis for xcelsius bubble chart

    Hi
    How to get text values in x axis for xcelsius bubble chart
    I have data as follows
    x axis: closed/qualification/lost
    y axis: deal age
    z axis: amount(bubble size)
    Thanks

    If you are using Xcelsius 2008 SP3 you will be able to do this.

  • How to get Dealership of Adobe Photoshop Elements for Mumbai, Maharastra, India

    Hello,
    i am doing wedding Album designing in india Using Adobe Photoshop Elements8 Licence Version.
    Also Developing Plugin for Adobe Premiere in Flex.
    How to get Dealership of Adobe Photoshop Elements for Mumbai, Maharastra, India
    any one have idea please help.
    thanks
    Dhiraj

    Hi,
    Thanks Barbara B. sure i will try.
    Thanks
    Dhiraj

  • How can get a database like ****.SQL file for test in sqlplus in oracle8i

    How can get a database like ****.SQL file for test in sqlplus in oracle8i,I am a beginner,thanks

    I'll give it a guess as to what it is you want but I'm afraid you'll have to give some more information to go on. I appreciate it's difficult for people who are beginners or who don't have English as their first language.
    Are you trying to run a SQL file? From SQL*plus you can do either of these:
    SQL> start my_file
    or
    SQL> @my_file
    N.B.: if th efile has a .sql extension you don't need to include it, but you do for any other file extension e.g.
    SQL> @myfile.run
    Here is the page Vijay referred to:
    Re: Physical storage Checks & adding disk on server. I hope you find it useful.
    You will more helpful links (including links to the Oracle on-line manuals at this page:
    Re: How to attach a java bean in forms6i
    good luck, APC

Maybe you are looking for