How to get administrator account again?
I have done something stupid -as you do-concerned with security I changed my administrator account type to user type thinking that my other user account would automatically become the admin account.
Now I have an unknown account [which could be Toshiba factory account] as the administrator which asks me for an unknown password for certain tasks etc.
Can anyone help me out with any suggestions other than restoring my computer back to its factory settings pleeeease?
YEAH I do not know why I have done this -BUT-
I do not have an account with admin priv. Windows was installed at the factory and after consulting and trying a few things with Windows support[at cost] it was suggested that the admin password prompt that appears is probably toshibas ALSO this account name is hidden from me all that appears is the password promt box when I go to change anything requiring admin. permission. Windows suggested transferring all my files etc. that I wanted to external device and then contact Toshiba to reset to factory settings I am trying to desperately avoid this- WHAT A MESS thanks for any input-
Similar Messages
-
How to get administration password
Please advice how to get administrator password
With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.
With 10.4, 10.5 or 10.6 if you don’t have an install disk check this article. http://www.macyourself.com/2009/08/03/how-to-reset-your-mac-os-x-password-withou t-an-installer-disc/
If you're running 10.7 Lion check this article
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/
With 10.8 restart holding the Command and R keys, then from the drop down
of actions, choose Terminal. When Terminal opens type:
resetpassword
and press enter.
You will get a reset password window from which you can select the user you want to reset, the admin account in your case. Type a new password twice, do not do anything with the hint box. Click Save, then confirm you want to do this reset. Then click apply to the user's home directory, and click the apple in the left corner, and choose Restart. -
I downloaded updates to iphoto and computer erred on install. A report went to Apple.
I cannot open iphoto. I decided to reinstall iphoto from my app disk and now I get an error message"......iphoto may be damaged or incomplete" Any suggestions how to get iphoto going again???
My iphoto library still exists and I don't want to lose it.https://discussions.apple.com/community/ilife/iphoto
-
After upgrading to Lion, my Macbook Air's built in iSight camera has disappeared. I'm not sure how to get it recognized again. Help -Sami
Well, if you did then you may be able to track it, if you did not it's not possible.
-
My Apple TV was set up with a different Apple ID than I have for my ITunes Account. In other words I have multiple Apple ID's. How can get these accounts to sync up?
If you wish to use home sharing then you need to setup the Apple TV under your ID.
-
i am from Lebanon and they did disable my account because of authorization they did my cousin without my knowledge, and i did change the password of my account and the webcard used please can u help me to know how to get my account back
http://www.apple.com/support/itunes/
-
The voiceover on my ipod touch has stopped working. Not sure what i have done to stop it. anyone any idea how i get it started again?
Turn VoiceOver on or off: Go to Settings > General > Accessibility > VoiceOver. You can also set Triple-click Home to turn VoiceOver on or off. See “Triple-click Home” on page 129.
copied from page 120, ipod touch user guide 5 -
I have an iPhone 3GS and was trying to restore it...
Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do.
Any ideas on how to get it working again?This means that the phone was previously hacked to carrier unlock (unauthorized unlock), and when you restored, the hack was removed and it became re-locked to its original carrier. It will now accept a SIM card only from that carrier.
Your only option is to contact the carrier it's locked to and enquire if they will provide authorized unlocking. Not all carriers will unlock and those that do usually have requirements and qualifications - i.e. you have to be a current or former customer in good standing. -
How to get Contract Account Number in Service Ticket
Hi Experts,
How to get Contract account number in Service Ticket, we are working in ISU environment. when i create the service ticket the contract account number is there in Business agreement number field in service tiket.
Can anyone tell me how to retrieve that field.
Answer will be appreciated.
Praveencheck tables tfk_buag_ref and fkkvkp
-
When launching Illustrator on Mac OSX 10.9 I get an error that the program is no longer supported on PowerPC. I tried moving the plug-ins to a different folder as the Adobe site suggested but no luck. Any ideas how to get this launched again? Same issue for Photoshop and InDesign
You will need to uninstall, run the Cleaner tool and reinstall you adobe applications. Adobe apps don't take kindly to inplace updates of the OS on Macs.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
Hello,
I have question how spammer get our accounts and
groups name ?
I have issue I am received spam email in my inbox not in junk mail
spam agent already enable in my hub transport and also create SPF record but still receiving email in my inbox
what to do to transferred spam email to junk email
thanksthanks for reply,
I am test my domain health I found some warning and error :
category
Host
result
https
mydomain.com
The remote server returned
an error: (400) Bad Request. (https:// mydomain.com)
dns
mydomain.com
Bad Glue Detected
dns
mydomain.com
SOA Expire Value out of recommended range
smtp
Mail.mydomain.com
11.388 seconds - Not good! on Transaction Time
what do mean those warnings? -
How to get the account numbers which maintains negative balance for consecutive 5 days
Here is what I am trying to do
I am trying to get the accounts which has negative balance consecutively for five days
Here in this a/c 1 and 5 has consecutive negative balance
how to pull these accounts using sql query.
create table #p(cal date, ac# int, bal int)
insert into #p values ( GETDATE(), 1, -1),
( GETDATE(), 2, 1),
( GETDATE(), 3, 1),
( GETDATE(), 4, -2),
( GETDATE(), 5, -6),
( GETDATE()-1, 1, -1),
( GETDATE()-1, 2, 1),
( GETDATE()-1, 3, 1),
( GETDATE()-1, 4, 2),
( GETDATE()-1, 5, -7),
( GETDATE()-2, 1, -2),
( GETDATE()-2, 2, -1),
( GETDATE()-2, 3, -1),
( GETDATE()-2, 4, 2),
( GETDATE()-2, 5, -6),
( GETDATE()-3, 1, -2),
( GETDATE()-3, 2, -1),
( GETDATE()-3, 3, -1),
( GETDATE()-3, 4, 2),
( GETDATE()-3, 5, -2),
( GETDATE()-4, 1, -4),
( GETDATE()-4, 2, 1),
( GETDATE()-4, 3, 1),
( GETDATE()-4, 4, -2),
( GETDATE()-4, 5, -2),
( GETDATE()-5, 1, -4),
( GETDATE()-5, 2, 1),
( GETDATE()-5, 3, 1),
( GETDATE()-5, 4, 2),
( GETDATE()-5, 5, -1)
-- drop table #p@ Jing
Again not sure if it is ok to comment on other people's answers, I hope you don't take it the wrong way, but your query will not account for CONSECUTIVE days. E.g. if the acc balance goes back to a positive value, day count must be reset.
Now I understand why people answered this so much faster than me LOL.
Edit: Besides, the requeriment for the acc being returned is that its value was negative for 5 days (120 hours). When a given account balance first switches to a negative value, it has 0 hours in that state. It all add a day to its "negative balance consecutive
day count" property the next time its value is checked (cal + 1). With that said, if your query worked, it would be cnt > 6 not cnt > 5.
Thanks for pointing the issue. I have improved my query to address it.
I try to come up with something to my understanding to the questions. It may not interpret right from the question itself for various reasons. I still consider it is a great learning experience. Thank you for your comments.
create table #p(cal date, ac# int, bal int)
insert into #p values ( GETDATE(), 1, -1),
( GETDATE(), 2, 1),
( GETDATE(), 3, 1),
( GETDATE(), 4, -2),
( GETDATE(), 5, -6),
( GETDATE()-1, 1, -1),
( GETDATE()-1, 2, 1),
( GETDATE()-1, 3, 1),
( GETDATE()-1, 4, 2),
( GETDATE()-1, 5, -7),
( GETDATE()-2, 1, -2),
( GETDATE()-2, 2, -1),
( GETDATE()-2, 3, -1),
( GETDATE()-2, 4, 2),
( GETDATE()-2, 5, -6),
( GETDATE()-3, 1, -2),
( GETDATE()-3, 2, -1),
( GETDATE()-3, 3, -1),
( GETDATE()-3, 4, 2),
( GETDATE()-3, 5, -2),
( GETDATE()-4, 1, -4),
( GETDATE()-4, 2, 1),
( GETDATE()-4, 3, 1),
( GETDATE()-4, 4, -2),
( GETDATE()-4, 5, -2),
( GETDATE()-5, 1, -4),
( GETDATE()-5, 2, 1),
( GETDATE()-5, 3, 1),
( GETDATE()-5, 4, 2),
( GETDATE()-5, 5, -1),
( GETDATE()-6, 5, -1)
--update #p
-- set bal=-1*bal
-- where cal='2014-09-22' and [ac#]=5
;with mycte as ( Select *
,row_number() Over(Order by [ac#], cal) - row_number() Over(Partition by [ac#], sign(bal) Order by [ac#], cal) rnDelta
from #p)
,mycte1 as (
select * ,
sum(Case when bal< 0 Then 1 Else 0 End) Over(Partition by [ac#], rnDelta Order by [ac#],cal ) cnt
from mycte
SELECT distinct [ac#] from mycte1
Where cnt>=5
drop table #p -
How to get On Account Balance for a Customer in Accounts Receivables(AR)
Hi,
Pls let me know how i can get the On Account Balance and Customer Balance for a particular customer in AR.
Pls let me if there is any SQL query or function availabe to get On Account Balance in AR.
Is On Account Balance and Customer balance is same in AR.
Pls let me know how i can get both the values.
regards
Udittry to join your query from these tables:
1.Customer - RA_CUSTOMERS_ALL
2.Customer Name - RA_CUSTOMERS_ALL
3. Ship to /Bill to & Location - HZ_CUST_ACCT_SITES_ALL and RA_TERRITORIES
4.Account Balance - AR_PAYMENT_SCHEDULES_ALL
5.Current Balance - AR_PAYMENT_SCHEDULES_ALL
if you additionally need aging try to set from here
a)1-30 Past - AR_PAYMENT_SCHEDULES_ALL
b)31-60 Past - AR_PAYMENT_SCHEDULES_ALL
c)Over 90 Past - AR_PAYMENT_SCHEDULES_ALL
This way you can achieve the outcome -
How to enable administrator account in windows 8
I need Administrator Account access to install SQL server 2005 in Windows 8 and I tried all Possible or given solution in PC but I'm not succeed to enable this account.. I tried lusrmgr.msc also but there is nothing option.
Mainly I couldn't find the option Local User and group management option in Windows 8..
and also i tried from cmd by net user administrator /active:Yes
but command displays access denied
Hi,
Please try this to enable CMD on logon screen:
http://www.askvg.com/how-to-launch-command-prompt-or-other-programs-using-ease-of-access-button-at-login-screen-in-windows-vista-and-7/
Then, try to enable built-in admin account.
net user administrator /active:Yes -
How to get specific accounts using ScriptedHostResourceAdapter
Hi
we are using ScriptedHostResourceAdapter for mainframe.
But how to get some specific list of users.
When i try to get the connetion using
<invoke name='getAffinityConnection' class='com.waveset.adapter.HostConnPool'>
Iam getting error. Though LoginAction is there in idm and working with users and reconciliations.
com.waveset.exception.ItemNotFound: ResourceAction: LoginAction
When i try to use listAllObjects still iam getting the same error.
com.waveset.exception.ItemNotFound: ResourceAction: LoginAction
<invoke name='listAllObjects'>
<new class='com.waveset.adapter.ScriptedHostResourceAdapter'>
<rule name='commonRuleLib:RUL_getWSObject'>
<argument name='Id' value='Mainframe'/>
<argument name='type' value='Resource'/>
<argument name='context'>
<invoke name='getAuthenticatedContext'>
<new class='com.waveset.server.InternalSession'/>
<s>configurator</s>
</invoke>
</argument>
</rule>
<new class='com.waveset.object.ObjectCache'/>
</new>
<s>Account</s>
<map>
<s>accountId</s>
<s>G1NXV6T</s>
</map>
<s>configurator</s>
<invoke name='getPassword'>
<invoke name='getObject' class='com.waveset.ui.FormUtil'>
<invoke name='getAuthenticatedContext'>
<new class='com.waveset.server.InternalSession'/>
<s>configurator</s>
</invoke>
<s>User</s>
<s>configurator</s>
</invoke>
</invoke>
</invoke>
Please help if any solution is there
Thanks
Edited by: shailu541 on Feb 3, 2010 10:50 AM
Edited by: shailu541 on Feb 3, 2010 10:52 AMI think i got it now. iam not passing objectcache
<invoke name='getCache'>
<new class='com.waveset.server.InternalSession'/>
</invoke>
Maybe you are looking for
-
Insufficient privileges on 11.2.03 but not 11.2.0.1?
ON Oracle 11.2.0.1 User dropped. User dropped. User dropped. BANNER Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production PL/SQL Release 11.2.0.1.0 - P
-
LR JPEG compression vs. Photoshop JPEG compression
I haven't found any documentation of the meaning of the 0 - 100% JPEG compression value in LR's (v1 or v2) Export File window. And the default value of 100% is overkill and results in huge files. At least I'm familiar with the Photoshop's 0-12 JPEG q
-
Trouble with iCloud: Equipment: Mac mini, OSX 10.7.4 iPod iOS 5.1.1 I have done and then repeatedly reread the iCloud instructions on each. I have up to date copies of Pages running on both devices. The Pages documen
-
Missing features in OS2 Email client
There are two glaringly missing features in the slick OS2 E-mail client. First, and most annoying when starting up with OS2, there is no "mark all as read" option. This matters when adding a new but exisitng account, as we are all doing now. Second,
-
11g 11.1.1.4.0 premgen space issue
I had 11.1.1.3.0 installled in XP-2.8 GHZ (core 2) 3GB machine and it was running fine with -Xms512m -Xmx1024m PermSize=128m -XX:MaxPermSize=512m Then I have installed 11.1.1.4.0 and statred getting 'could not allocate heap memory to JVM' so I have c