How to get adobe to work properly

I have downloaded the adobe flash player and it will not work properly for me at all what can be done here

First, you're in the wrong forum. This is for Adobe Reader, not Flash Player.
Second, without providing your OS and browser, you leave anyone and everyone who can help guessing as to where to even begin.

Similar Messages

  • How to get mail to work properly?

    Hello,
    I'm trying to setup my mail app, so that it sends from my work email address - lets call it [email protected] I've setup the work email address in the mail app as an exchange account.
    When I'm sending an email, it says the work email address, then next to it, it says "via ABC.com".
    Why is it doing this, and how do I fix it?
    Cheers.

    Do you have a yahoo account that allows you to access it with your email? As I recall, the very basic and free yahoo account only allows web browser access.
    If that's not a consideration, ensure that your incoming mail server user name is fully qualified, ie, [email protected]
    Click window and connection doctor and see what it says about the connection. If you see a red dot, look to the right for the reason. If you click on the reason it should take you to where to fix it.

  • Anybody know how to get the clock working properly!

    :x The stupid dumb blankety blank clock won't stabilize. Every time I reboot it changes.  A petty little problem, but I bet somebody knows how to fix it.
        In rc.conf I have hardwareclock set to "localtime" and timezone set to EST. In kde if I open Adjust Date & Time it's set to utc? Should I change rc.conf to UTC?? I just tried to adjust the clock and it would'nt
    adjust at all. Anybody know how to fix this? -- Thanks  - Larry
    I changed timezone to America/NewYork, instead of EST, they're both listed in usr/share/zoneinfo, and then left the fields in the Adjust Date & Time blank. It seems to be working, but what is the correct method?

    I have come to love htpd from freshmeat. Instead of accessing a timeserver it uses any old website. My clock is 3 seconds out on boot and it adjusts for that immediately then it checks every 12 hours. That may not suit everybody and those people would probably choose adjtime which calculates a slew rate and then brings your clock into synch with whatever atomic timeserver you nominate. However htpd is simple and it works. I use my ISP port 80.

  • Pressing "shuffle" on my 7th gen Nano will only randomly pick the first song, then repeats it over and over. How do I get "shuffle to work properly?

    Pressing "shuffle" on my 7th gen Nano will only randomly pick the first song, then repeats it over and over. How do I get "shuffle to work properly?

    Is "REPEAT ONE" highlighted. If it is, touch it to de-select. Cheers!

  • I recently changed from a pc to a mac book. The major issue I am having right now is getting yahoo to work properly. The major thing is autocomplete does not work and I do not know how to load my contacts to "mail".

    I recently changed from a pc to a mac book. The major issue I am having right now is getting yahoo to work properly. The major thing is autocomplete does not work and I do not know how to load my contacts to "mail". Furthermore, I cannot attach any type of documents to my emails (Yahoo says there is a problem). I suspect there is a setting somewhere, but I don't know where. Javascript is enabled, so I am out of options

    Which os are you using?
    Yahoo issues should be posted in their forums or contact Yahoo tech support.

  • Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?

    Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?

    Hi connally25,
    Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
    http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
    If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
    Facebook Follow Widget not working
    Regards
    Sonam

  • Which version of Adobe Flash works properly with Mac operating systems?

    http://www.youtube.com/watch?v=no0Fn_gIoCo
    On Xat Flash Chatrooms it freezes. I thought Adobe Flash Beta 12 would fix my problem of the chats animations and chat freezing but it only temporarily fixed it because when I rebooted my Mac it still freezes the animation and chat! The latest versions of Adobe Flash non-beta Adobe Flash 11 something freezes too! Which specific Version of ADOBE Flash works properly on Mac OSX? NONE?
    I'm on Safari Browser and Mavericks 10.9 OSX.
    Specs:
    Haswell 3.4ghz
    graphics card: gtx 760
    4 gigs of ddr3 ram
    Macbook 2009: My other mac that does it too
    Intel duo 2 core 2.13ghz
    4gigs ddr2 ram
    I believe my macbook is running Nvidia 9400m 250mb card
    So each Mac that has had this problem is running Nvidia tho I don't know if thats the problem and I doubt it is. I'm sure it's a bug in Adobe Flash and Apple not caring enough to address the problems with Adobe Flash not working properly. If the two companies can't get a long, then why doesn't apple spend a little bit of money making their own compatible Flash for their safari browser?
    My friend who is a girl that I talked to on Xat said that she has a Macbook I think from 2010 or 2011 running Mavericks and her Macbook does not freeze. Is there an explanation to why my Macbook 2009 freezes in Adobe Flash and if there's a solution to it? Is her Macbook running ati card maybe?
    This is becoming very frustrating, so I need a solution. It does this on my Macbook and my Desktop Mac both which have Nvidia gpus.

    The latest Flash 11 works fine for me on Mavericks, on every site that plays videos.
    I have no idea what Xat Flash Chatrooms is (and really have no interest), but it sounds like the issue is with that site, as Flash in general works for literally tens of millions of people on most other sites.

  • How to get Adobe programs running?

    I am running Adobe CC on a Windows 7 machine, 64bit. The machine has registry software (PC Mechanic) and McAfee antivirus. I have 8 gigs of RAM and a dual core CPU. When I run Adobe, I tend to also have a web browser like Opera running in the background. Windows is used exclusively for Adobe software. I have frequent issues with Adobe programs, like Dreamweaver or Photoshop not being able to launch. Or getting errors like "internal signature error". I have called Adobe technical support, who logged onto my computer several times, but their technicians are consistently stumped. Collegues suggested I simply uninstall and reinstall the software. That worked at first, now the programs will no longer launch---even if reinstalled.
    Adobe seems unable (or perhaps just unwilling to help). It is suggested that Adobe simply cannot work on the Windows operating system. Rather, the programs are made for MAC computers, not Windows.
    Does anyone have suggestions on how to get Adobe CC to run on Windows 7?

    Hi Ikhider,
    I am running Adobe CC products on a Windows 7 64-bit system too. I also use McAfee anti-virus software as well.
    For troubleshooting I would try first shutting down everything running in the background not required by right-clicking on the icons in the system tray and choosing quit or exit.
    When launching the Adobe apps try right clicking on the icons and choosing Run As Administrator and see if that makes any difference
    The Resolve product launch freezes or problems section of this document might help:
    http://helpx.adobe.com/creative-suite/kb/troubleshoot-launch-issues-problems-cs5.html
    -Dave

  • Cannot get network to work properly on fresh install

    I just got myself a new lenovo laptop and naturally wanted to instakll arch on it immediately.
    The network I am on requires me to register the MAC address of the machine before I can access anything more than our intranet. Since this is done via a website, that is obviously difficult to do with arch, so I ran a mandriva livecd first to register it.
    Quirk number one: I set up a new partition table and installed arch with grub. somehow one of these things actually changed my MAC address because I needed to reregister it and I could tell there it was a new one registered.
    However, booting into arch again and I still can't get it to work properly. pinging our intranet address works fine, but I can't get to the www and so cannot install any new packages.
    I've installed mandriva on a separate partition and here it all works fine. So the problem seems to be with Arch. My uneducated guess is that it somehow registers as having a different MAC address in arch, which of course creates a bit of a catch-22 because I can't install the packages needed to go to our intranet website and fix it (I should note - once I re-registered my mac address after creating a new partition table, I could complete a net-install of arch. but no internet access having booted into it).
    Anyone know how I can fix this?

    tuxce wrote:actually, mac address doesn't change from one distribution to another
    but you can check your mac address by using "ifconfig"
    also verify if dns (/etc/resolv.conf) and route are well defined
    resolv.conf has
    # Generated by dhcpcd for interface eth0
    search rhk.dk
    nameserver 172.20.0.42
    nameserver 195.184.96.2
    rhk.dk is our intranet. I don't know if those numbers mean anything's out of place.

  • I am using Hover for my email address and I can not get it to work properly

    I've changed the MX record to 10mx.hover.com.cust.hostedemail.com (Hover's recomendation) but it's still not working.
    How Can I get this to work properly?
    Thanks for the help!

    Hey KoobeP,
    I have performed a DNS look-up on the domain stormbluedesign.com and can see that the MX record you have added exists within our DNS: http://screencastmb.worldsecuresystems.com/img/2013-04-24_0949.png. However, this MX record is not pointing to any IP address which leads me to believe the MX record you added is incorrect.
    I believe the MX record you need to add is mx.hover.com.cust.hostedemail.com, with a priority of 10. Not 10mx.hover.com.cust.hostedemail.com. But as always, contact your mail service provider for confirmation on the records they require you to add.

  • I have purchased itunes match but the cloud will not load on my ipad 4.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

    i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

    On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
    On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

  • When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly.  Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal.  In mixed mode it works fine.  Any ideas on how to get 5.0 working?

    When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly.  Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal.  In mixed mode it works fine both placed.  Any ideas on how to get 5.0 working?  I thought 5.0Ghz was supposed to have a wider range.  Do I need to change a setting on the Macbook Pro?
    Thanks, W

    I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
    The upside is that the 5 GHz signal will allow faster speeds.
    The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
    In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
    If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

  • ITunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help

    iTunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help

    It is likely a hardware failure
    http://support.apple.com/kb/TS3694?viewlocale=en_US#error1

  • Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

    I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
    I have sticky keys enabled.
    When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
    The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
    When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
    If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
    Has anyone figured out how to get speech recognition working with sticky keys enabled?
    Or a way to get an individual key shortcut to start on the first press and process it on the second?
    Or a way to get key combinations to work, as specified by the help:
    Dictation On and Off
    To use Dictation, click On.
    When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
    Shortcut
    By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
    To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

    I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

  • I just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

    i just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

    Did you enable Siri in settings?
    Settings > General > Siri > ON
    If Siri is off, all you get when pressing the home button for 1 second is the old Voice Control.

Maybe you are looking for