How to get all active ajax requests ?

I need to write javascript function that gets some information about all active (at this moment) ajax requests that are posted by RichFaces.

Thanks.........
This command is working fine for me .......
Get-ADComputer -Filter {enabled -eq $true} -properties *|select Name, DNSHostName, OperatingSystem, LastLogonDate
But i am getting lastLogonTimestamp value as below:-
lastLogonTimestamp
129596940132789000
How can i correct it???

Similar Messages

  • How to get all active session id's

    hai,
    i am new to servlet. i am tring to find out all active session id's for security perpose.
    and also i want to deactive a perticular session using that session id.
    but i don't know how to do. please help me.
    thanks in advance.

    Well to me.. I wud like to write a Listener class implementing HttpSessionListener in the following way....
    import javax.servlet.http.HttpSession;
    import javax.servlet.http.HttpSessionListener;
    import javax.servlet.http.HttpSessionEvent;
    import java.util.HashMap;
    public class SessionHandler implements HttpSessionListener{
    public static HashMap<String,HttpSession> SessionsMap = new HashMap<String,HttpSession>();
    public void sessionCreated(HttpSessionEvent se) {
    SessionsMap.put(se.getSession().getId(),se.getSession());
    public void sessionDestroyed(HttpSessionEvent se) {
    SessionMap.remove(se.getSession().getId());
    public static invalidateSession(String SessionId){
    HttpSession session =  SessionsMap.get(SessionId);
    SessionMap.remove(SessionId);
    session.invalidate();
    }Note:I'm assuming tht you are running the code on Jdk/jre 1.5+
    However, i think its more of core way of implementing this specially usage of static members howevr @ the given situation can very well cater your resources.added to it you add ActivationListener depending on your requirement.
    Hope this might help :)
    REGARDS,
    RaHuL

  • 'Get All New Data Request by Request' option not working Between DSO n Cube

    Hi BI's..
             Could anyone please tell me why the option ' Get one Request only' and  'Get All New Data Request by Request' is not working in DTP between Standard DSO and InfoCube.
    Scenario:
    I have done the data load by Yearwise say FY 2000 to FY 2009 in Infopackage and load it to Write-optimised DSO (10 requests) and again load Request by request to Standard DSO and activate each request. I have selected the option in DTP's to  'Get All New Data Request by Request' and its working fine between WDSO and SDSO. But not working between Cube and SDSO. While Execute DTP its taking as a single request from SDSO to Cube.( 10 request to single request).
    Regards,
    Sari.

    Hi,
    How does your DTP setting looks like from below options ? It should be change log, assuming you are not deleting change log data.
    Delta Init. Extraction from...
    - Active Table (with archive)
    - Active Table (without archive)
    - Archive ( full extraction only)
    - Change Log
    Also if you want to enable deltas, please do not delete change log. That could create issue while further update from DSO.
    Hope that helps.
    Regards
    Mr Kapadia
    *Assigning points is the way to say thanks*

  • All Active Application Requests is empty

    I have setup the Application Approval Workflow.  I use 3 different servers one for SCOR one for SCSM and one for SM Datawarehouse.  Everything appears to be set up correctly according to the AAW documentation.
    Under All Applications in Configuration Items the applications are listed.  Under Applications Associated with Application Requests there are No items found.  Is this an association I need to create or should it list the Applications I have already
    marked for requiring Approval in SCCM (2012 R2 CU3)  ?
    Also in SCSM under Work Items - All Active Application Requests there are No Items Found.
    In SCOR if I run the Runbook Tester for Application Request Synchronization it goes from Monitor - Get Counter Value - Check init Start - Check Max - Increment Counter.
    I suspect the items listed above are empty because this Runbook is not completing fully.
    If I disable CheckMax and Increment Counter to force it to route to the Get IsActive counter it doesn't run past Check init Start.
    So the Sychronize Application Requests counter is not getting run.
    Hope this makes sense and any feedback appreciated.
    Stephen

    Hi,
    Please try to manually sync the application requests under Work Items by clicking
    Sync Now.
    Please also check out the CM -> SM Synchronization Runbook and run through it once via Runbook Tester. This way you can get additional information for what particular application this activity failed. Then check what might be wrong with the application
    on SCCM side.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • RRB-How to get the activity description instead of WBS element in the bill

    Dear All,
    I am using RRB DIP profile to do my Resource related billing
    RRB-How to get the activity description instead of WBS element in the billing
    document.Now  iam able to get the cost and the quantity used as line items but instead of getting the respective line items in the invoice iam still getting the WBS
    element description for all the activities.Can some body guide me to overcome this problem.
    Assured reward points for your suggestions and help.
    Thanking you,
    Best regards,
    R.Srinivasan

    Dear All,
    Please can any body help me for the same.IT is urgent.I will award you points.
    thankyou,
    Best regards,
    R.Srinivasan

  • How to get all rows that are returned in inner sub query of select statemen

    If a sub query in select statement returns more than one row than how to get all those returned rows in the final
    output of the query .It will be all right if all column's value repeat and that multiple output of inner query comes
    in another column .
    How to get that ?

    As Frank said, you likely want a join, and likely an outer join to replicate the select in the projection. Something like:
    SELECT id,stat, section, USER_ID concerned_person
    FROM table_all,
      left join table2
        on room_id = sectoion and
           sur_role = 'r001'
    WHERE section IN (SELECT code
                      FROM t_area
                      WHERE dept= 'p002')An alternative, depending on where and how you are using the statement would be something like:
    SQL> WITH t AS (
      2    select 1 id from dual union all
      3    select 2 id from dual),
      4  t1 as (
      5    select 1 id, 'One' descr from dual union all
      6    select 1, 'Un' from dual union all
      7    select 1, 'Une' from dual)
      8  SELECT t.id, CURSOR(SELECT t1.id, t1.descr from t1
      9                      WHERE t1.id = t.id)
    10  FROM t;
                      ID CURSOR(SELECTT1.ID,T
                       1 CURSOR STATEMENT : 2
    CURSOR STATEMENT : 2
                      ID DESCR
                       1 One
                       1 Un
                       1 Une
                       2 CURSOR STATEMENT : 2
    CURSOR STATEMENT : 2
    no rows selectedJohn

  • How to get all the values from the dropdown menu

    How to get all the values from the dropdown menu
    I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
    How do I get number of item is selection dropdown?
    How do I extract a ?name? for each value, one by one?
    How do I change a selection by referring to particular index of the item in a dropdown menu?
    Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
    RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
    Message was edited by: testtest

    The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
    <Select Name=ProdType ID=testProd>
    </Select>
    I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
    Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
    If I want to search by id I could do the following:
    Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
    Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
    You can use the FindElement to grab links, text boxes, etc.
    The next example grabs from a link on a page
    Home
    Set x = RSWApp.om.FindElement("Home","A","innerText")
    I hope this helps clear it up.

  • How to get all users under an organizations?

    Hello everyone.
    Just want to know if anyone knows how to get all users under a particular organization.
    From the Search User form, I found they may kind of user such attribute conditions:
    MemberObjectGroup
    is in
    XXXX(organization)
    But unfortunately, the "is in" is not a valid AttributeConditionOperator, so besides using "recursive" self-written function, anyone knows any possible buit-in trick?

    Here is my solution:
    <Rule'>
        <RuleArgument name='organization'/>
        <RuleArgument name='context'/>
        <block>
            <defvar name='orgs'>
                <new class='java.util.ArrayList'/>
            </defvar>
            <invoke name='getChildObjectGroupNames'>
                <invoke name='getObject' class='com.waveset.ui.FormUtil'>
                    <ref>context</ref>
                    <s>ObjectGroup</s>
                    <ref>organization</ref>
                </invoke>
                <ref>orgs</ref>
            </invoke>
            <append name='orgs'>
                <ref>organization</ref>
            </append>
            <invoke name='getUsers' class='com.waveset.ui.FormUtil'>
                <ref>context</ref>
                <map>
                    <s>conditions</s>
                    <list>
                        <new class='com.waveset.object.AttributeCondition'>
                            <s>MemberObjectGroups</s>
                            <s>in</s>
                            <ref>orgs</ref>
                        </new>
                    </list>
                </map>
            </invoke>
        </block>
        <MemberObjectGroups>
            <ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
        </MemberObjectGroups>
    </Rule>

  • How to get all INDEXes from a database

    How to get all INDEXes in a database? I need to store them in script file (.SQL). My database version is 10.2.0.3.0.
    Edited by: Iniyavan on Sep 18, 2009 1:39 PM

    --Thanks, Koppelaars. The second query works. But I'm unable to store in spool file. May be it's due to CLOBs in the output. I did the following:
    set head off
    set feedback off
    set linesize 32727
    set pagesize 50000
    spool c:\indexes.sql
    select dbms_metadata.get_ddl('INDEX',INDEX_NAME,'MYSCHEMA')
    from user_indexes;
    spool off
    --In the spool file, I find only this
    CREATE UNIQUE INDEX "MYSCHEMA"."A" ON "MYSCHEMA"."BNK_DEALID" ("DEAL_ID")
    PCTF
    CREATE INDEX "MYSCHEMA"."ACCENT_RAC_REPORT" ON "MYSCHEMA"."ACCENT" ("SCHEME", "VAL
    CREATE INDEX "MYSCHEMA"."ACCENT_REPORT" ON "MYSCHEMA"."ACCENT" ("SCHEME", "APP_REF
    CREATE UNIQUE INDEX "MYSCHEMA"."ACCENT_X" ON "MYSCHEMA"."ACCENT" ("DEAL_ID")
    P
    CREATE UNIQUE INDEX "MYSCHEMA"."ACCNAV_X" ON "MYSCHEMA"."ACCNAV" ("SCHEME", "ACCNA
    --How to get all the DMLs in one SQL file?
    --Nagappan, I'm using WIN.

  • How to get all data from nokia to i5s

    how to get all data from nokia E71 to i5s???

    if you can put those data in your computer then add it in iTunes. your iPhone 5s should get it thru syncing.

  • How to get all the values in one column of a JTable

    How to get all the values in one column of a JTable as a Collection of String.
    I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column.

    I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column. You could always write a custom TableModel that stores the data in the format you want it. It would probably be about 50 lines of code. Or you could write a loop in 3 lines of code. I'll let you decide which approach you want to take.

  • How to get ALL validate-errors while insert xml-file into xml_schema_table

    How to get all validate-errors while using insert into xml_schema when having a xml-instance with more then one error inside ?
    Hi,
    I can validate a xml-file by using isSchemaValid() - function to get the validate-status 0 or 1 .
    To get a error-output about the reason I do validate
    the xml-file against xdb-schema, by insert it into schema_table.
    When more than one validate-errors inside the xml-file,
    the exception shows me the first error only.
    How to get all errors at one time ?
    regards
    Norbert
    ... for example like this matter:
    declare
         xmldoc CLOB;
         vStatus varchar
    begin     
    -- ... create xmldoc by using DBMS_XMLGEN ...
    -- validate by using insert ( I do not need insert ;-) )      
         begin
         -- there is the xml_schema in xdb with defaultTable XML_SCHEMA_DEFAULT_TABLE     
         insert into XML_SCHEMA_DEFAULT_TABLE values (xmltype(xmldoc) ) ;
         vStatus := 'XML-Instance is valid ' ;
         exception
         when others then
         -- it's only the first error while parsing the xml-file :     
              vStatus := 'Instance is NOT valid: '||sqlerrm ;
              dbms_output.put_line( vStatus );      
         end ;
    end ;

    If I am not mistaken, the you probably could google this one while using "Steven Feuerstein Validation" or such. I know I have seen a very decent validation / error handling from Steven about this.

  • How to get all previous versions page contents of a publishing page using SharePoint Client Object Model 2010

    How to get all previous versions page contents and other field values of a publishing page using SharePoint Client Object Model 2010?
    Thanks,
    Osmita

    Hi Osmita,
    Greetings.
    Here are the links that helps you. It has code attached to it.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/a0d2ab40-99ba-4368-8505-1dc559ef6469/get-content-of-previous-version-of-page-sharepoint-2010?forum=sharepointgeneralprevious
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/faaf419f-997e-4150-9911-48cc375c3b46/how-to-get-previous-published-versions-of-publishing-pages-in-sharepoint-2010?forum=sharepointdevelopmentprevious
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • How to get all the values from a HashMap? thanks

    hi
    can anyone tell me how to get all the keys and their values contained in a HashMap? thanks

    thanks to u all for ur response, i gues if i need to get both keys and values, i need to use keySet() to get a set of keys first and then using each key to get value. is there any other faster way to get both of them (key and value)? thanks again

  • How to get all the values of a variable with F4 with checkboxes to select

    Dear Experts,
    After Executing a query by giving let 3 values(Out of 10 Values) to a variable.
    To give 2 more input values to the same variable(i.e.,total I wanted to give 5 inputs this time ),after refreshing the query,for that variable if I click F4, I am seeing the historical values(i.e.,3) and remaining 7 values also But with out any Check Boxes besides them to select the 2 inputs.
    In the same F4 Screen, If I click all values(an Icon at The bottom),then also Im seeing but no check Box.
    I hve tried by deleting the Delete Personalization also,but no use.
    Please tell me How to get all the values with F4 with check boxes to select ,whatever I want??
    Thanks in advance

    Take a look at the InfoObject and go to the Business Explorer tab. If the 'Query Def. Filter Value Selection' is set to 'Only Values in InfoProvider', you're only going to get the values in F4 that exist in the InfoProvider, not everything in the Master Data. This would need to be changed to the value of 'Values in Master Data Table' if you want it to show everything possible when F4 is chosen.
    Likewise, you're going to need to look at the query and go to the Advanced tab for the InfoObject. Make sure that the radio button for 'Values in Master Data Table' is selected. If not, then you should change that selection.

Maybe you are looking for