How to get an indicator when the Agilent E3136A is ready.

I need to know exactly when the Agilent E3136A (a tripple power aggregate) has made the changes i asks for. As it is now I can se a curve from the E3136A as it changes the output, I whant to get rid of this curve and maybe get a trigger signal from it when it is ready so I don't continue with my measuerements until the E3136A has made all changes on it's outputs.
I'm using labview.

I don't have a manual for this power supply so you might want to check in it to see whether anything in the status byte is set. When you say that you "se a curve from the E3136A as it changes the output", how are you viewing this curve? Is it the front panel meters or something else? There is a command to read what the meters are detecting.

Similar Messages

How to get clipping indicator in the Curves Adjustment??

I hold down the option key while moving highlight slider to the left but no clipping indicators appears. I'm using Photoshop CS4.
What am I doing wrong??
Thanks for any help,\
Russ

Hey buddy, really appreciate your attempt to help me.
I went to IMAGE-MODE and make sure I was in RGB. Is that where i
should check? I don't know where to check to see if display is set to
Light and not Ink.
The funny thing is that when I push the Option key in Levels I get the
Clipping Indicator when I move the Highlight slider to the left, but
when I press the Option key for the Curves White Point slider, nothing
happens as I move the slider to the left.
I don't know, I have to be doing something wrong.
Any further comments would greatly appreciated,
Russ

I cannot see my Iphone 4 in my device window in the finder anymore. It use to appear so I could copy the camera pictures off of it and transfer them to other folders. Does anyone have and idea how to get it back when you plug it in initially. Thanks

I cannot see my Iphone 4 in my device window in the finder anymore. It use to appear so I could copy the camera pictures off of it and transfer them to other folders. Does anyone have and idea how to get it back when you plug it in initially. Thanks

You will want to open iPhoto, go to the iPhoto menu and select Preferences. Under the General tab, next to Connecting camera opens: select iPhoto. Close the preferences and quit iPhoto. Reconnect your iPhone 4. iPhoto should open automatically and offer to import your pictures. Import them and then do what you want with them.
Best of luck.

I've lost my iPhone 4... How can I find it when the device is offline when using "find my iPhone app"????? Any way of getting a location from it????

I've lost my iPhone 4... How can I find it when the device is off linesmen using "find my iPhone app"????? Any way of getting a location from it?????

No. It must be online in order to locate it.
What To Do If Your iDevice Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. iCloud- Use Lost Mode
6. What to do if your iOS device is lost or stolen
7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
8. Find My iPhone
9. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive.

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c drive, or get the itune to open my old c drive when I log in.

might be some help on one of these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

How to get each thread in the threadpool

Hi,everyone.I'm now learning java.util.concurrent package and I have two questions about the threadpool.
1) How to get each thread in the threadpool;
2) How to get each thread's data in the threadpool and dispaly them onto GUI;
e.g :
There are 5 threads in the threadpool(ThreadPoolExecutor) and I have 100 tasks(Runnable or Callable),every task scans a directory(every task scans a different directory),how can I display the "real-time" count of the files in the directory which the current 5 threads in the threadpool scan onto the ListView Items in the GUI?

Willings wrote:
Hi,everyone.I'm now learning java.util.concurrent package and I have two questions about the threadpool.
1) How to get each thread in the threadpool;You don't
2) How to get each thread's data in the threadpool and dispaly them onto GUI;
e.g : You don't
There are 5 threads in the threadpool(ThreadPoolExecutor) and I have 100 tasks(Runnable or Callable),every task scans a directory(every task scans a different directory),how can I display the "real-time" count of the files in the directory which the current 5 threads in the threadpool scan onto the ListView Items in the GUI?You should notify your "monitor" when you add something to the pool, and the Runnable/Callable should notify the same "monitor" when it starts to execute, and during its processing. Finally you notify the monitor when the execution has completed.
Kaj

How to Get a Version of the ME

I purchase package Adobe CS5, but Can not write in Arabic when in use photoshop or and others like .Illustrator ,Dreamweaver ,InDesign
What is the solution?
How to Make package Adobe CS5 write Arabic
" How to Get a Version of the ME"

Do you want to use an Arabic typeface in PS, or have the PS interface in Arabic?

Restored my 4S. How to get pictures back from the cloud?

Background: I had a 3GS and on launchday of the 4S I picked one up. A white 32GB on AT&T to be exact.
I had been having some issues with the battery, so today I figured I'd try and start fresh. Well, I backed up everything on the cloud, and I also backed up everything onto the computer in iTunes when I did the restore.
I've got my music back. Cool.
I've got my apps back. Great.
I can't seem to figure out how to get my photos from the camera roll back. Nor do I know how or if it is even possible to get the photos and my old text messages back on this new restore. Also, none of my mail is coming back either.
I can see my most recent backup in the iphone settings under iCloud. And I can also see my most recent computer backup on the computer. But I'm not sure what I need to do.
Any help would be great. Thanks.

OK - understood.
There are a couple of ways of going about this. First, my recommended method:
Restore from a backup (so your photos, SMS etc are on the phone
Connect to iTunes
Set the phone to sync photos to a relevant app on your desktop (what app depends whether you're Windows or Mac) - this gets your pics onto the desktop and safe.
If you want to save SMS, use PhoneView (Mac) or TouchCopy (Windows) or similar to copy them off the phone
Restore the phone as a new device
Get the photos back the way you got music etc back - via iTunes sync
The second method entails using one of the utuilities around the place that can extract from the backup - I have no experience with them, so I don't know how well they work. That's why I go for the first method - simpler, more robust.
By the way, I came across this other method for SMS:
http://hints.macworld.com/article.php?story=20090624022758268
Hope this helps

How to debugg a script when the Required out put is like Fax or email

Hi this is Durga Prasad i have small doubt in scripts can any one clarify that one plz normally we will do that one with activating debugger but when a special requirement is like fax or e mail how we will do that one
"how to debugg a script when the Required out put is like Fax or email"
Thanks in advance
Durga Prasad.

Hi
DEBUG Smartform:
1) One way to debug smartform is to debug the Function Module of that smartforms.
If you want to debug particular smartform node that the solution would be,
insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint.
So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
2) SFTRACE can be used for debugging SMARTFORMS.
Read More here.
http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
script
1). Use Tools - Word Processing - Layout Set (SE71). Enter name of layout set and then Utilities - Activate Debugger.
It is of no consequence which layoutset you enter when selecting the SAPscript debugger. (Menu path: Tools-Wordprocessing - Forms, Utilities - Activate Debugger) The next layoutset called will invoke the debugger.
2). Another way to set the SAPScript debugger is to run program RSTXDBUG.
When you debug Print program it is same as you debug any other ABAP program. While when you debug SAPScript, you actually debug the code ( scripting) you have written SAPScript Form.
As per ur question there is nothing new with script debugging,
it is same as normal report debugging...
SMARTFORMS DEBUGGING
For smartforms debugging you can do this.
1. Execute the smartform (execute button in SMARTFORMS transaction)
2. Take the generated function module and display it in SE80.
3.Find the smartforms Elements (text elements, windows, code lines, loops) in this and set Soft break points.
Correct name is SMARTFORM_TRACE. You have lots of options for adequate analysis
Tcode - SFTRACE
Re: How to Debug a Smartform
Debug of smartform and sapscript.
Debugging SmartForms
Debugging of a subroutine pool.
SCRIPT
There are 2 separate kinds of debugging available when you try to debug scripts.
1. Debugging the print program : This is the normal debugging we do for our report programs.
2. Debugging the script itself : You Can debug a SAP Script by activating debugger in two ways:
a .In SE71->Menu->Utilities->Activate Debugger, then debugger will be get activated and when your print program is executing Script Debugger will be in active and you can proceed with your debugging.
b. Goto se38-> RSTXDBUG ->Execute this same as going thru in se71-> Menu, now debugger will be activated.
refer to the link below
http://www.howforge.com/how-to-debugging-sapscript-form
Look at the BLOG here, it is well explained
/people/sudheer.junnuthula2/blog/2007/01/09/script-debugging
Regards
Anji

I can't get on line when the message "Blocked plug-in" appears.

I can't get on-line when the message "Blocked plug-in" appears. How do I get rid of this?

If you actually can get online on some websites in Safari, but are unable to view the websites that depend upon the use of Adobe Flash Player, such as YouTube, then the problem is an outdated Adobe Flash Player version, and you need to update it.
, System Preferences, Other, Flash Player, Advanced, Updates, Check Now
(This screen shot is from OS X 10.8.5, so it might appear different than your OS X 10.6.8 screen, and a different release of the Flash Plugin might be installed.)

HT1212 ive changed my email on itunes and apple and att but my app store still shows my old id so it doesnt recognize me to add new apps...any clues how to get it changed on the phone

ive changed my email on itunes and apple and att but my app store still shows my old id so it doesnt recognize me to add new apps...any clues how to get it changed on the phone

Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account. You may have already done this.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

HT1725 Hi, I'm pretty new to itunes. I bought a song and it downloaded, but will only play the first 3 seconds? Any idea how I get it to play the rest of the tune?

Hi, I'm pretty new to itunes. I bought a song and it downloaded, but will only play the first 3 seconds? Any idea how I get it to play the rest of the tune?

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

I deleted most visited, latest headlines, getting started, yahoo, youtube, apple in mozilla's folder,how to get it back like the first time i installed? thx

i deleted most visited, latest headlines, getting started, yahoo, youtube, apple in mozilla's folder,how to get it back like the first time i installed? thx

if you hid the menu bar and the navigation bar simply press the alt button, this will bring back the menu bar and form there you can right click and select which bars you want shown

How to get an indicator when the Agilent E3136A is ready.

Similar Messages

Maybe you are looking for