How to get audio from garageband to imovie

Hello!
I need help!
I made a movie on imove, THEN exported it to garageband where I did more audio.
I would like to put the new music that I recorded onto imovie again.
How to I save the audio files?

1.In garageband: share to iTunes and than pick the file up via iMovie
or
2. In iMovie, click the itunes icon you will not only see the iTunes library but also your Garageband files.
If you click on a GB-file to play it will tell you wether it has already been shared or if you want to share it, if that's done you can use the file for your film
HtH
Ben

Similar Messages

How to get audio from a tape recorder into FCE?

Hello All,
I have a older Sony TC-D5 tape recorder (the sound recording is still extremely good and, in fact, much better than any of my digital camcorders at 16bit). My question is: how can I get this into FCE4? The TC-D5 has a left and right RCA audio out plugs. If I plug that into the external mic connection in my intel iMac will FCE4 recognize this as an audio source? Is there some other way I'm not thinking of?
Thanks for your help.
Mike

Hi Ian, Martin and Michael
If I understand you, you'd like to shoot sound with your TC-D5, and Video with your Canon HV20 - Correct?
If so, I suppose you're getting better audio quality with the AKG and Tape set up. Of course you'd be limited to shooting where there's AC Power available and logistics with your set up.
In any event, sure I'd give it a try, but as Ian pointed, be prepared to fiddle and jiggle the sound around on the Audio Track to get it in sync. Tape Speeds are subject to change. There are a few tricks you can use to cue your tape recording to when you start filming; (Ian's Tips)
But there are also other methods, (as Ian Pointed out), probably many dozens to choose from. If you're able to use/barrow a mixer you can still use your AKG. Other methods; Using an overhead boom with a really good shotgun Mic. The approaches are endless.
In regard to strickly narrative, I've settled on a combo of both an Audio Techinca Lapel Mic and an Audio Technica Shotgun Mic. You can hear some of this in my trailer below.
Don't forget Michael, as long as you get 'SOLID' audio with strong peaks and no distortion, with minimum background noise, you can always choose dozens of Post Audio applications, (including FC's plug-ins).
Good to see you both again Martin and Ian!
Mike
http://vimeo.com/7340608

I don't understand how to get audio from itunes into my project

i am new to elements but have some basic understanding, but I can't get any audio into my project from itunes, just keep getting an error.

BeeW
Thanks for the follow up.
On your computer hard drive, are you seeing .m4p or .m4a for this file?
Please check out the following online article on iTune music conversion to .wav (especially when DMR is involved).
http://www.aimersoft.com/itunes-drm/itunes-to-wav.html
But, going with your latest
the error is @the importer reported a generic error'
when i select the file to import it shows .MTS, in the error message it shows .m4a
all a bit confusing.
The first line of the above is consisted with having to convert the iTunes music to another format, preferred .wav (DMR or other reasons)
But there is something wrong with that second sentence. I have never seen iTunes music with an .mts file extension. Typically you see that with a video file with AVCHD compression (1080 variety). So, please take another look at the properties of the file that you are trying to import...video or audio? On the other hand, m4a is a MPEG 4 audio file.
Could you do a screenshot of the error message where you are seeing ".m4a" in it?
We will be watching for your follow up. Do not give up. We will figure this out.
Thanks.
ATR

I'd like to know how to get videos from Camera to imovie

I'm a new Mac user who has a video movies that I want to import into imovie project.
I've also purchased a fire wire, to facilitate the process. So far not successful. Help
Thanks in advance.

What format are your movies? iMovie can import directly from your camera or camcorder, import from your iPhoto or Aperture Library or can import video files from the Finder, see:
iMovie '11: Import video
What you cannot import are purchased videos protected by digital right management or video DVDs.
Here is tutorial video on importing into iMovie: http://help.apple.com/imovie/movies/en/apple-ilife-imovie-tutorials_import_video -us-20101020_640x360.mov
Regards
Léonie

HT6012 How to get movies from the old iMovie into the new version

I’m very ‘disappointed’ to find out by opening iMovie after updating to Maverick that all my movies seemed to be lost! Or in contrary to other programs, e.g. iPhoto, the movies apparently are left behind in the older version of iMovie.
So after first shock I have to find out that I could ‘recover’ them via Help and Service by updating projects and events. I did this and it seemed to work until this action met movies in my older iMovie project library without original movies in the event library. The update action got stuck here and I had to force quit.
Next morning no trace of any update action in the new iMovie. So I tried again. But now I got the message that iMovie didn’t find any projects and events!!!
Well, they are stille there! Somewhere!
Can anyone help me out?
LB

iMovie 10.0.1 has been released to address reliability issues when updating projects and events from previous versions of iMovie. Specifically, iMovie could appear to stop responding or quit unexpectedly during the update process.
If you encountered these issues, you should now be able to update your projects and events successfully. To do this, visit the link below and follow the instructions listed in the section "If updating is interrupted or takes an extended period of time."
http://support.apple.com/kb/HT6012

How to get audio to an overhead projector from iPad

Hello All. Has anyone figured out how to get audio from ipad to an overhead projector? I know I could mirror if I had HD, but I do not have HD at work.

U could try using the headphone jack sound can be output through this using the appropiate cord to connect to your projector.

How to get audio back into iMovie in sync

I have an iMovie project made up of around 40 clips. I want to adjust the audio "on the fly" because the iMovie normalize does not work across clips (and none of the work arounds posted work). Not to mention the rubber band from previous iMovies has been taken away. I know how to extract audio from a QT movie and open it in Logic Express or Garage band to adjust the sound. But how do you get it back IN to the original movie and be in sync? I tried it and the audio came back shorter. I could shoot whomever at Apple removed the rubber band audio adjustment from iMovie. That was an inexcusable and callous move. How do I get the movie back in place after I've adjusted it? Thanks.

You cannot sync anything back to the camera roll.
The camera roll is where pics/vids are stored temporarily until you get them imported into your computer. Camera roll is not a good place to "store" pics/vids. You should always import them as soon as you can and back them up so you don't lose them.
You can then sync them back to your photo gallery (pics) and your ipod video section ( for videos).

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

How to get audio out of speaker with angry birds app?

How do I get audio from the internal speaker for my angry birds app.? Only audio is through the head phone jack......

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

How to get a PDF file in iMovie ?

Hello,
I have a sketch as a PDF file on my desktop.
How can I get this sketch in iMovie '11 ?
Thanks for your answer !
John

Thank you, but I have to be more clear ...
I received a drawing from a friend - a Windows user - as a "docx" file.
When I clicked on it, it opened in Pages '09 version 4.0.5 with a message popped up stating : - Some warnings occurred. Would you like to review them now ? You can review warnings at any time by choosing View > Show Document Warnings.
With "Don't Review" or "Review" commands.
I clicked on "Review" and saw a Documents Warning stating a Missing font Calibri.
Clicking on Share > Create a PDF document that can be viewed and edited with a PDF application, or viewed in a web browser. Image quality 'Good' . And command 'Next …' and saved as ' logos1.pdf ' on Desktop command EXPORT.
It opened in Adobe Reader and I saw this message :
- This document does not allow you to save any changes you have made to it unless you are using Adobe Acrobat 9, Adobe Acrobat Pro 9, or Adobe Acrobat Pro Extended 9. You will only be saving a copy of the original document. Do you want to continue? -
The Adobe Reader vs 9.4.2 was put on my Mac years ago …
I have the feeling I'm circling around a problem while NOT knowing how to get the sketch file in iMovie '11 …..
Please tell me what do I do wrong ?
Or should I ask my friend to resend the logo in another, and what file format ?
Hope I could make myself understandable, after several years living as a dutchman in France ?

Re: Not getting audio from TV when connecting MacBook Pro with all correct cables.

How do I get audio from the TV when connecting MacBook Pro with all the correct cables?

Hi Lynn,
If you're positive you have the correct cables, and positive they work, they must be plugged into an input on the TV made for that purpose, then that input must be selected on the TV's menu.

Transfer audio from garageband to adobe premiere

Hello all, like the title says, how would i go about transferring audio from garageband to adobe premiere? I'm making a short movie and want to add narrative audio i recorded in garageband to movie clips i have in adobe premiere cs5, i have the latest garageband and i'm recording audio via the built in imac microphone. Also, if this is difficult to do with garageband, what other programs would you recommend to use, that are free prefibly? Thanks in advanced !!

This will do what you want:
http://ecamm.com/mac/phoneview/

How to get audio into Adobe Premiere Elements 12?

How to get audio into Adobe Premiere Elements 12?
I have filmed an air show with a very good camera JVC pro
And when I pick up the clips in Adobe Premiere Elements 12, it works too, but only without sound.
I think I tried everything for 4 days now.
Sound in my computer works perfectly
I go to where the video files are located and try to run them in VLC or in Nero Kwik so it works fine with both audio and video.
I have checked the sound card.
Yes, I have tried everything so now I'm so tired of this lousy so I'm ready to throw this program at the dump.
It's not normal if you will keep on producing audio for over 4 days at Adobe
The old Elements 9 worked fine. Offer some of would consider developing it again. I do not know how I should do.
My name is Thore Hult
live in Karlshamn in Sweden

Thore Hult
On what computer operating system is your Premiere Elements 12 working on? Have you updated it from 12 to 12.1 Update using an opened project's Help Menu/Update. If not, please do so.
For your immediate problem.
What is the model/settings for the JVC camera that recorded you video. I want to get at the properties of your source video including the file extension.
Since you are getting video, but no audio, please download and install the free codec utility named GSpot to see what is shows
for your Audio Name and Status.
http://www.headbands.com/gspot/
The other properties of the file there would also be of interest.
When you import your source file into the project, do you see any "conforming" activity going in a progress bar at the bottom right corner of the workspace?
If so, do you wait for it to complete before you move forward in the project?
Can you get sound in any of your Premiere Elements projects with this current JVC file or other?
Can we assume that your troubleshooting has included checking
a. Volume control within the project
b. Edit Menu/Preferences/Audio Hardware ASIO
Let us start here and then we can decide what next if necessary.
Thanks.
ATR

Was wondering,how do I go from GarageBand on ipad2 to multiplatinum producer with diamond inlays on my teeth,is there an upgrade I missed,..reall,simple...how do I post music from GarageBand for ipad2 onto Facebook....thanks.

How does one get music from GarageBand on ipad2 to post on Facebook

I worked with the problem last night and the solution I
started coming to involved creating my own custom document class
based off which extends MovieClip. My thought is that way I have
access to the initialization routine of the timeline itself and
that all of the elements on the main timeline should be
"properties" of my custom class.
Is this correct? Is there a down side to doing this & if
so what is it & why?
Also, just for my reference, the last time I did anything
with ActionScript I think I was using '_root' to target the main
timeline. WHat are the global variable names in AS 3? Is it just
'root' & 'stage' or 'Root' & 'Stage' or what?

How to get photos from mac to iPhone 6? when i try it just comes up iCloud instead of my photos

how to get photos from mac to iPhone 6? when i try it just comes up iCloud instead of my photos

Make sure Settings > iCloud > Photos > iCloud Photo Library (Beta) = "Off"
Then sync your iPhone using iTunes and make sure your sync settings for photos are set correctly in iTunes.

How to get audio from garageband to imovie

Similar Messages

Maybe you are looking for