How to get audio out of speaker with angry birds app?

How do I get audio from the internal speaker for my angry birds app.? Only audio is through the head phone jack......

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Similar Messages

How to get XLate out of ASA with SNMP

Hi All,
We recently replaced out trusty old 3660 NAT router with a pair of ASA5520's. Our service desk used to be able to pull the NAT translations out of the router using SNMP. (CISCO-IETF-NAT-MIB:ciscoIetfNatMIB)
We would like to do that same on the ASA, which obviously means we need to pull out the xlate. I have so far been unable to figure out how to do this, can anyone help?
We are running Version 8.0(2)
Many Thanks,
Nick

Hmmm, this was going to be my fall-back option, but I'm not looking forward to this as I'll have to figure out some way of having the syslogs go into an SQL database so that I've got a real-time translation table that I can query.
Is anyone aware of whether getting the Xlates out of a PIX/ASA using SNMP is possible?

How to get audio device information connected with MAC system?

I want to know the samplerate (the number of samples per second) supported by the device connected with the MAC system.
I am also pasting the code as below where I need that info.
// Using PCM 44.1 kHz, 16 bit signed,stereo.
          AudioFormat audioFormat = new AudioFormat(AudioFormat.Encoding.PCM_SIGNED, //     the audio encoding technique
          44100.0F,// sampleRate           the number of samples per second
          16,      // sampleSizeInBits the number of bits in each sample
          2,       // channels           the number of channels (1 for mono, 2 for stereo, and so on)
          4,       // frameSize           the number of bytes in each frame
          44100.0F,// frameRate          the number of frames per second
          false); // bigEndian          indicates whether the data for a single sample is stored in big-endian byte order (<code>false</code> means little-endian)

Kanni wrote:
Can you sugget something in that area.That's not an issue that's specific to MAC, it'd be specific to any system with a limited number of supported capture formats.
I've handled this problem in the past by generating an array full of all of the AudioFormat objects I'd consider acceptable, and I just iterate through them until I can find a TargetDataline that supports it.
TargetDataLine tdl = null;
/* Write your own code to get an array of acceptable formats here */
AudioFormat formats[] = JavaSoundFormats.getFormatList();
for (AudioFormat format : formats) {
    DataLine.Info dlinfo = new DataLine.Info(TargetDataLine.class,
                                             format);
        if (AudioSystem.isLineSupported(dlinfo)) {
            try {
                audio_in_format = format;
                tdl = (TargetDataLine)AudioSystem.getLine(dlinfo);
                break;
            catch(LineUnavailableException e) {
                // No need to do anything
/* If we don't have a targetdataoutput object, give up */
if (tdl == null) {
    System.err.println("No TargetDataLines found!");
    System.exit(1);
}

How to get data out of quiz with POST or GET?

Seems like a simple question, but I haven't yet been able to
capture the results of a quiz yet. I want to fetch the POST data
from the quiz in PHP using something like:
$quizTotal = $_POST['total'];
$quizCorrect = $_POST['correct'];
Alternatively, I can use ASP:
quizTotal = request.form("total")
quizCorrect = request.form("correct")
But I still haven't been able to get ANY data out of a quiz.
HOW?

benhenny,
Are you trying to capture data locally and send to a
server-side script - or
use the existing LMS functionality to capture the post (for
AICC) in a PHP
script?
Regards,
Andrew

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

HT2931 I am trying to figure out how to get the pre made "beats" with my garage band for my MacBook Air can u help

I am trying to figure out how to get the pre made "beats" with my garage band for my MacBook Air can u help

Hello Mattxy2,
Thank you for the question. It sounds like you would like to add some Apple Loops to your project. I recommend reviewing the following sections in Garageband Help:
GarageBand Help - Search for Apple Loops
http://help.apple.com/garageband/mac/10.0/#gbnd3002ab64
GarageBand Help - Add Apple Loops to your projects
http://help.apple.com/garageband/mac/10.0/#gbndc1d3db81
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to Get In & Out of Match, Get your Downloads and Run

How to Get In & Out of Match, Get your Downloads and Run
So you have read the marketing hype, and are thinking what you really want is to pay for the service to upgrade your low quality bitrate files to a bit better 256KBPS rate easily, as don’t fancy rebuying/ reimporting or other method
This guide should show you the fastest route to achieve you upgrades
It assumes you’re working from your main music library, and know something about IT, and have <25k of music files
Backup your music files
If you know how to do this, its simple right – so once done then move to step 2, if not read below so you don’t blame me for a loss
Transfer Hardware
your choice the transfer hardware, suggest offline harddrive via USB3.0 (blue USB connector/eSata/ 1494b/1GB NIC/etcetera but your call
If you use USB2.0/ 100MB NIC/1394a or other lower transfer method, accept the time hit
Don’t use Time Backup/local disk backup software unless you have RAID 5 setup or better (and if wondering what that is, you almost certainly don’t then)
Don’t use internet backup service unless you live next door to the hosting company, with stunning internet connection to envy 99.9% of the human race, remember this is the fast method folks)
Transfer Software
I am assuming you know how to do a copy n paste/ robocoby/xcopy/drag n drop or whatever method turns you on via finder/explorer/cmd window ect
Caveat #01: If not sure how to do above, then stop now as you are not IT literate ready for this
Find your music files and back them up
Now keep the computer running, preferably with nothing else running from this point for ease of use bar an active internet connection, and power saving switched off
If you know where the files are great, backup the files, but some don’t so for them as below
Caveat #02: if you don’t know how to find them your most likely on default settings, or sitting with a legacy from a past upgraded machine - below should help but you might want to stop now if you have never been curious about the location before
Within iTunes , go to [Edit/Preferences/Advanced] and note down the location shown for Itunes Media Location
In the same location of preferences, hit [Keep iTunes Media Folder organised] and let the application do its stuff. You will end up with the location in 1ciii a ready to copy location which for simplicity of topic, copy the whole folder and its subfolders. You may end up with some extra copies of music files (an iTunes safety mechanism, but it won’t show in the folder location, and we can ignore later on)
Enable Match (after paying for the service)
Run Match
Accept that the Apple iTunes process is not perfect, may crash/stop/pause and reboots will be needed, and we can move on so to speak. Key here is you cannot do an unattended script or assume no end user interaction needed L
Turn on iTunes Match, notice the new ITunes Match on the left hand sidebar, click it, then hit the Start button – if it works and you eventually get to STEP 3 perfect.
If it fails before getting to STEP 3, reboot and restart
If this still fails to get to STEP 3, then create a new iTunes database (browse forums on how to do), read your media files from the location in 1civ
Stop MATCH (the upload process only, not the service)
Once STEP 3 starts, CLICK STOP - ASAP, as all this does it upload data, and you don’t want to do this, just get your upgraded files (remember the title of this entry your reading!)
This also avoids future issues with Album art lost
Delete Matched low bitrate files
Create a NEW SMART playlist, with two criteria
Show all files with bitrate is less then 256
Show all files where iCloud status is MATCHED
In the new playlist, click it and it shows the files we want to blow away.
Click Edit / Select All then
Click ctrl in windows/apple (cmd) logo in mac, and press delete button, ensuring you do NOT tick the delete from iCloud Option. Now want a few mins for it do do its stuff.
Download Upgraded BitRate Files
In the same location as 5, reselect all, and right click, and select the option to download all, and off it goes
On the lefthand sidebar in iTunes, click Downloads, and you will then see in the middle bottom screen an option for simultaneous downloads (select it)
Your done Just let the app now do its stuff. I would ignore the message saying you can get on with other things, and use anther machine, preferably not using the same internet connection.
Optional Steps:
Click randomly from the Itunes/Matched/256KBPS listed files, and play them. Not all the files, one every 30 or so, and just the start, then last few seconds to check not dead or corrupt files.
Update your Step 1 backup with the new files, which is going to take up more space, guess at 40%.
Kill your iTunes Match account (both the recurring automatic subscription, and the account if not continuing to use the store part of iTunes)

bump

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

Audio out of sync with waveform

We have 3 new computers at work with Final Cut Studio on all of them. Since we got them 2 or 3 weeks ago everything has been fine except today. 2 of them all of a sudden get audio out of sync. You can tell the audio waveform is inline with the video but the audio coming through the speakers are off and get worse as the clip plays. We are recording with xd1 cameras and importing using a card reader and using the xd transfer software. The actual .mov file when played outside of FCP is fine, it's just when it's imported into FCP that the problem occurs. I even have a project that I finished 2 weeks ago, it was fine at the time but when I played it today the audio was all of a sudden off. I've checked the settings and I'm clueless as to what to do. Any suggestions?
I don't know if this makes a difference but the computer that this problem isn't happening too has been updated online. The other 2 haven't. We don't have internet access all the time. I'm thinking an update might cure the problem but we didn't have time to update it today.

I think I figured out what the problem is. We have AJA Kona card installed in the computer but we are at a temporary location so setting the FCP to AJA Kona card but listening through the regular computer speaker output is what is causing the problem. When I setup the FCP to XDCAM 1060i it works fine.

How to get audio to an overhead projector from iPad

Hello All. Has anyone figured out how to get audio from ipad to an overhead projector? I know I could mirror if I had HD, but I do not have HD at work.

U could try using the headphone jack sound can be output through this using the appropiate cord to connect to your projector.

How to get string from jtextpane along with its attributes

sir,
How to get string from jtextpane along with its attributes
i,e font,size,style,color etc.
please help me out.
my mail id is [email protected]

JTextPane extends JTextComponent
JTextComponent.getDocument()
a Document is a set of Element, see Document.getRootElements(). Each Element has attributes, stored within an AttributSet object see Element.getAttributes()
a Document can also be rendered as a String, see Document.getText( offest, length ), use it with 0 and Document.getLength() as parameters.

How to get audio into Adobe Premiere Elements 12?

How to get audio into Adobe Premiere Elements 12?
I have filmed an air show with a very good camera JVC pro
And when I pick up the clips in Adobe Premiere Elements 12, it works too, but only without sound.
I think I tried everything for 4 days now.
Sound in my computer works perfectly
I go to where the video files are located and try to run them in VLC or in Nero Kwik so it works fine with both audio and video.
I have checked the sound card.
Yes, I have tried everything so now I'm so tired of this lousy so I'm ready to throw this program at the dump.
It's not normal if you will keep on producing audio for over 4 days at Adobe
The old Elements 9 worked fine. Offer some of would consider developing it again. I do not know how I should do.
My name is Thore Hult
live in Karlshamn in Sweden

Thore Hult
On what computer operating system is your Premiere Elements 12 working on? Have you updated it from 12 to 12.1 Update using an opened project's Help Menu/Update. If not, please do so.
For your immediate problem.
What is the model/settings for the JVC camera that recorded you video. I want to get at the properties of your source video including the file extension.
Since you are getting video, but no audio, please download and install the free codec utility named GSpot to see what is shows
for your Audio Name and Status.
http://www.headbands.com/gspot/
The other properties of the file there would also be of interest.
When you import your source file into the project, do you see any "conforming" activity going in a progress bar at the bottom right corner of the workspace?
If so, do you wait for it to complete before you move forward in the project?
Can you get sound in any of your Premiere Elements projects with this current JVC file or other?
Can we assume that your troubleshooting has included checking
a. Volume control within the project
b. Edit Menu/Preferences/Audio Hardware ASIO
Let us start here and then we can decide what next if necessary.
Thanks.
ATR

My 4gb SDHC flash mem card is stuck in DVD slot on my iMac 27". How to get it out?

I misplaced my 4GB flash memory card (Canon camera) in the DVD slot (above the card slot) and it disappeared while I was trying to get it out. Naturally I inadvertently (spelled "stupidly") knocked it inside and could not figure out how to get it out. The dust rubber "shields" hide it and I've tried to find it with a toothpick and wedge it out, to no avail. Are there any ideas or suggestions others may have used to get it out (I know turning it on it side and shaking won't work). Why in the world did they design it like it is -- I've had it happen to me and others have also told me of their misadventures, but they also were able to gradually get it out. This time, it's in too deep. Can I ignore it and still use the CD/DVD slot without it blowing up?

You might need to take to an Apple technician or apple dealer to let them take apart the iMac and remove the flash memory card. if you're very careful you might try a pair of needle nose pliers and a flashlight but it's easy to do damage to the DVD internal mechanical if you're not real careful.
A good story to tell your grand kids maybe ;-)
Good luck

How to get animate edge to interact with my web content

Hello and good day,
I will like to know how to get animate edge to interact with my web content or DOM.
Am creating my own cms and also i created an image slider.
i know how to integrate it to dreamweaver but now i will like to the animate slider to change images when a new image is added to my cms..

There is no direct way out of edge animate.
You could export a OAM from Animate and import that into DreamWeaver CC which has a direct way of Hosting sites

How to get real value from selectOneChoice with javascript?

Hi,
How to get real value from selectOneChoice with javascript? The event.getNewValue() only gets me the index of the selected item, not the value/title.
JSF page:
<af:resource type="javascript">
function parseAddress(event)
alert("new value: " + event.getNewValue());
</af:resource>
<af:selectOneChoice label="Location:" value="" id="soc4">
<af:clientListener type="valueChange" method="parseAddress" />
<f:selectItems value="#{Person.locations}" id="si7"/>
</af:selectOneChoice>
HTML :
<option title="225 Broadway, New York, NY-10007" selected="" value="0">225 Broadway (Central Office)</option>
<option title="90 Mark St., New York, NY-10007" value="1">90 Mark St. (Central Office)</option>
Thanks a lot.

Something I was missing ,
You need to add valuePassThru="true" in your <af:selectOneChoice component. I have personally tested it and got the actual value in alert box. I hope this time you got the real solution. You can also test the following code by your end.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:form id="f1">
<af:panelBox text="PanelBox1" id="pb1">
<af:selectOneChoice label="Set Log Level" id="soc1"
value="#{SelectManagedBean.loggerDefault}"
valuePassThru="true">
<af:selectItem label="select one" value="First" id="s6"/>
<af:selectItem label="select two" value="Second" id="s56"/>
<af:clientListener method="setLogLevel" type="valueChange"/>
</af:selectOneChoice>
<af:resource type="javascript">
function setLogLevel(evt) {
var selectOneChoice = evt.getSource();
var logLevel = selectOneChoice.getSubmittedValue();
// var logLevelObject = AdfLogger.NONE;
alert("new value is : " + logLevel);
//alert(evt.getSelection);
//alert(logLevelObject);
evt.cancel();
</af:resource>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>

How to get audio out of speaker with angry birds app?

Similar Messages

Maybe you are looking for