How to get audio to play through TV?

I have a Thunderbolt to HDMI cable and can only get video to show up on my HDTV screen. I am trying to get audio to play through the TV as well, but it only plays through my Macbook Pro. Any suggestions?

Hi ajlarson6,
I found some information concerning the settings that need to be in place to play audio through a TV:
OS X Mountain Lion: Use a television as a display
http://support.apple.com/kb/PH10671
I hope this helps!
- Ari

Similar Messages

How to get audio to play through speakers

I have a Vizeo TV smart monitor, an Apple TV (of course), and a DVD/Receiver. A nice set of speakers are hooked up to the DVD player.
I introduced the Apple TV to this family recently. The Apple radio stations played through the speaker in the Vizeo TV and was not so good. Then I bought a optical video cable and used it to connect Apple TV to the DVD receiver. That worked brilliantly for a while and the blues songs from the blues station on Apple TV was coming through in full stereo through the speakers.
This worked for a while but more recently when I turned the system on again to listen to the same station, the sound was coming through the tv monitor's single speaker, not my mildly expensive nice ones. Does anyone know what's going on? btw Apple TV is connected to the tv monitor on HDMI3 and I have tuned the monitor to HDMI3 so that should be consistent.
Thanks,
Bill

that what you're asking is why the original appletv the alu one don't support airplay when
the airport express do right?
guess it's a choice from apple maybe it required a software update as airplay was "invented" long after the last atv1g os update and rolling out an os update for a discontinued product as the
first appletv was osX and intel x86 based
and it's replacement atv2 is ios and Arm based

How to get audio to play on Ipad using flash cc html5 canvas

I'm using flash cc html5 project type. I built my project and tested on desktop and it works fine. Once test on ipad it does not play the audio. It works on android devices but not my ipad 4. I'm using Mp3 files in my flash project.
I tried the safari & Chrome on my Ipad neither played the audio in my file.
Links to my files.
http://dev.wisc-online.com/prototypes/TestJosh/cis3405_html5.html
http://dev.wisc-online.com/prototypes/TestJosh/cis3405_html5.js

Thanks I read through that. I still cant determine what exacty my issue is.
Is it audio must be played only on a click handler?
Is it that i must install quick tiem on my ipad?
So i have to modify code that flash outputs for me to get audio to play on an Ipad? That doesnt seem correct? It should just function.

Can't get Audio to play through when importing using iMovie '09

Anyone know how to get audio to work when importing DV footage into iMovie '09.
It used to work fine in iMovie HD. Any ideas??
Yours sincerely,
Anthony
Irish MacUser & MacAddict

I've just spent a while trying to figure this out ...
I used this feature (monitoring audio on import) all the time in previous versions of iMovie ...
Kind of essential I think ...
Now we have a new 'feature' in iMovie where you can't monitor audio during import.
Wouldn't it be nice if Apple documented this somewhere (maybe on iMovie Help ...).
I understand about hi-speed import from other (non DV) formats ...
So why not just let the user hit the 'mute' button if they don't want to listen to audio on import ?
Pretty simple - rather than having this somewhat arbitrary rule imposed on iMovie users ?
The only way to monitor audio during import is to plug headphones into the camera itself.
Which means we are wearing a thing with a wire attached - making the BT headset capability of the Mac somewhat redundant.
Oh well ... one step forward, one step back.

Getting audio to play through computer speakers

Hi
Ive got an external NSTC monitor and im trying to get the sound to match up with the video on it. If i do audio follows video, then the sound comes out of the monitor which sounds like crap because it has bad speakers. If i make the audio come out of my computer speakers, then it is out of sync with the video on the external monitor. i guess i could get a bunch of cords from radio shack and get a splitter and plug the computer and the audio into my computer speakers, but i was wondering if there was a way within final cut to get the audio to play in sync but not through the external monitor's audio.

well i do have good speakers<<</div>
Good speakers and good monitors for editing work usually aren't the same thing. In post work, either video or audio, the audio monitors need to have a flat response; they should not color the sound in any way. That's the only way you know what the true audio will sound like.
Most speakers, including computer speakers do color the sound; some quite a bit, especially in the low end.
Nearfield monitors do provide a flat response and are designed for use in recording studios and edit suites for critical listening. When working in FCP, the ideal setup is to ALWAYS monitor your audio and video through the same path out from the computer, converted to analog and then the video going to an properly calibrated external TV monitor and the audio going to the audio monitors.
-DH

How to get STP to play through my miglia harmony audio?

Hi,
Despite selecting both input and output as the harmony in STP preferences it wil only record through, and not output to, the miglia. The Miglia is a firewire audio in/out which works fine in and out with Live 5 and out with Reason 3. It's driving me nuts as I cannot properly audition fx to use in Live projects as they sound so different through the i-macs speakers.
Also does anyone know if the great fx that coe with STP can be used as audio unit fx in other programs i..e. Live or only with Apple programs? I also tried this but with no joy.
Thanks

After a little snooping around I remembered that the left and right audio tracks in FCP were initially not marked as a stereo pair, but mono a1 and a2. I did select them and check the "Stereo" option under the "Mark" menu.
I then checked the capture window settings and saw that it showed that audio would be captured as stereo. I'd expected to see it as capturing two mono tracks. I thought I had the solution. Maybe the capture settings changed when I checked a1 and a2 as "stereo."

How to get sour to play through mini display via vga without sound cables?

I know that many of you guys might tell me that this question is stupid or that it is impossible to do it but i run in to problems that usually the company that made the product can't asnwer it all the time. So here it is. I have the mid 2009 MBP 17 in. 2.8ghz Core 2 duo. I've been using a minidisplay to VGA cable to connect to a sony briva tv since i've had it. and most time i'd have to plug in the 3.5mm jack to get the audio working. but once just once my mac decided to give all the audio control over to the TV without the auxilary cable plugged in. See, i accidentally pressed play and i started to hear sounds. but it wasnt from my mac. and the volume was completely up to the control of the tv. it was weird yet convinent, but as i was checking the connection to see what the **** i did, i took it out of clam mode which swithch my resolution and reconnect the display with the sound having to go through the auxilary again. So if any of you have had this luck and know how to do it please help me out.

Whovian wrote:
I know that many of you guys might tell me that this question is stupid or that it is impossible to do it but i run in to problems that usually the company that made the product can't asnwer it all the time. So here it is. I have the mid 2009 MBP 17 in. 2.8ghz Core 2 duo. I've been using a minidisplay to VGA cable to connect to a sony briva tv since i've had it. and most time i'd have to plug in the 3.5mm jack to get the audio working. but once just once my mac decided to give all the audio control over to the TV without the auxilary cable plugged in. See, i accidentally pressed play and i started to hear sounds. but it wasnt from my mac. and the volume was completely up to the control of the tv. it was weird yet convinent, but as i was checking the connection to see what the **** i did, i took it out of clam mode which swithch my resolution and reconnect the display with the sound having to go through the auxilary again. So if any of you have had this luck and know how to do it please help me out.
Can't be done dude

DW CS3: how to get audio to play in hot spot?

I have tried in vain to get an audio file to play when clicking on a hot spot on a graphic. It plays but it opens in a new window with a skin. I want it to play while the graphic is displayed. I tried target="-self" but it still goes to a new page. Anybody know of a way to get around this?
Thank you!
Laura

You don't need to go in the Environnement. In the Arrange window, use an Audio Instrument track, insert Ivory at the input and if the track is selected, you should hear it.

How to get audio to play at open of webpage

Hello.
Maybe someone can help me.
I am curious if audio can be implemented into a web page that
will begin playing when page is opened, rather than adding a "click
here" option.
If anyone knows how to do this or if it is even possible with
CS3, I would appreciate it.
Thank You.

Unsolicited audio is annoying at best
Please reconsider this notion.
"katben01" <[email protected]> wrote in
message
news:fb4dsv$gt6$[email protected]..
> Hello.
> Maybe someone can help me.
> I am curious if audio can be implemented into a web page
that will begin
> playing when page is opened, rather than adding a "click
here" option.
> If anyone knows how to do this or if it is even possible
with CS3, I would
> appreciate it.
> Thank You.
>

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.
I've tried plugging the hdmi into the TV directly and the receiver.
I get video every time. HBO to Go , Xfinity, ABC, Youtube, etc...
just no audio. Any suggestions?
I've tried starting the apps then plugging in the hdmi cable.
I never tried this before I upgraded to IOS 5.

Claudiamil-
I had not tried it with mine since upgrading to iOS 5, so I just did. I'm using a small Vizio HDTV. I did not try YouTube, but did try several videos and musical numbers. In all cases there was sound, including stereo when the source had it.
I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down. Dah*veed's suggestion to reset may be what you need.
Fred

How to get audio files to play on iTunes

So i've been rendering audio files recently and tryring to get them to play on itunes. Once the files are on my desktop i don't know how to get them to play on itunes. I tried right click opening them in itunes. I've also tried draging and dropping them with .mp3 and .m4a but i don't know what else to do. Pls help

What format? Will they even play in Quicktime Player?

How to get audio to an overhead projector from iPad

Hello All. Has anyone figured out how to get audio from ipad to an overhead projector? I know I could mirror if I had HD, but I do not have HD at work.

U could try using the headphone jack sound can be output through this using the appropiate cord to connect to your projector.

Getting Audio to play in the Background but only over a small selection of slides?

Hope someone can help with this. I have a module at the moment which I have created and I want to run some cheesy suspense driven quiz show music over my end of module quiz. I have to admit to being fairly new to a lot of Captivate and I have looked at Audio options and am struggling a bit. I want to add Audio to just ten or eleven slides of the 100 odd in my project. If I add to my project audio as background audio it plays over everything. I see the button to stop it but it appears to be per slide and that seems crazy when I only want it on a small percentage of the project. I also see I can add audio to individual slides but then the audio stops as the slide pauses which when doing a quiz just doesnt work. Does anyone know if and if so how I can audio to play over just these ten slides without the playing of the music being affected by the playhead. I would have thought multiple audio sources as background music must be something lots of peopel want and use. It cant just be me? Any help woudl be massively appreciated.
Thanks in advance
Jay

Huh. I could have sworn I'd done it before, but I just tried in 5.5 and a 6.0 trial, and the audio section in the properties panel completely disappears when I select mutliple slides... Strange.
It's a shame you had to go through such a long project slide by slide, Jay; I feel your pain. I'm not sure what else to suggest for future projects if that method doesn't work...
If your project doesn't have any other audio, you could perhaps mute the project audio on the slides that you don't want background audio (the Action section in properties allows you to set an "on enter" action when you have mutliple slides selected). Or if you have audio on all your slides but the background audio slides, you could configure the background audio when importing to have 0% volume on slides with audio. But those are two rather specific cases.

Mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone. Does anyone know how to get them to play on iPads/iPhones?

mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone. Does anyone know how to get them to play on iPads/iPhones?

You have to make sure they are fully compatible with iPad
Video formats supported:
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

How to get the form printed through the transaction ME42

hi,
How to get the form printed through the transaction ME42.
For example :
In t.code vf03 . In the main menu there is an option billing document , when we click on that we get a drop down menu which shows issue output to. If a print program call has the code to get the value from the t.code , immdiately when we click issue output to it call the form.

Here go to ME42 put in your RFC no, in the menu Header -- Messages, go there and see if a message has been inserted, else you can insert one.
when you save this, it will call the form.
Regards,
Ravi

How to get audio to play through TV?

Similar Messages

Maybe you are looking for