How to get "Automation" boxs in Logic 7.1.1

Yikes where do I go for Logic 7 questions?
Perhaps i'll get lucky here. Please.
I've been useing LOGIC 7X since inception & always had PROBLEMS WITH AUTOMATION when (dragging or copying) moving parts.Not with even remotely acurate.
Only occasionally by accident, the ARRANGE screen displays boxes that look like sequence lines but are all entitled "Automation" (intead of licks I played).Weird. A normal option?
Low & behold when I drag these lines they accurately move automation. I can open a diff arrange-screen-set or new one to get the normal licks/etc displayed but I wanna know... HOW DO I GET THAT SPECIAL "Arrange- Automation" type-page for new songs? Can't find it in the manual.
I am not talking about the normal "Display automation" here. This screen looks like seq boxes.
It almost seems like it was a hidden feature for the Logic- Geeks-inventors.
Is it right under my nose? If so,sorry for the lame brain.
Thx,
Woody

You've probably opened the Track Automation Folder, which displays the track-based automation as regular regions.
To open it, you must open the automation event list, and with that open, open a new arrange window from the Window menu. The new arrange window will display the Track Automation Folder. It's the only way to get there, the key command was removed.

Similar Messages

How to get check box in alv output

hi gurus
can anyone explian me how to get check box in alv output
it should not be a pop up window
i want to get in output itself
tahnk you
regards
kals.

Hi
by using rs_selfield
ty to call dynamic subroutine..
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
read table rs-selfield with key cond = 'X'
endform.
see the below example
REPORT Z_GET_REFRESH no standard page heading.
type-pools : slis.
tables : makt,
mara.
data : i_fieldcat type slis_t_fieldcat_alv.
CONSTANTS :
gc_refresh TYPE syucomm VALUE '&REFRESH'.
data : begin of i_makt occurs 0,
matnr like makt-matnr,
maktx like makt-maktx,
end of i_makt.
data : v_repid like sy-repid,
g_user_command type slis_formname value 'USER_COMMAND',
g_status_set type slis_formname value 'SET_PF_STATUS',
lt_event_exit TYPE slis_t_event_exit,
ls_event_exit TYPE slis_event_exit.
DATA:LC_GLAY TYPE LVC_S_GLAY.
select-options s_matnr for mara-matnr .
start-of-selection.
select matnr maktx from makt into table i_makt
where matnr in s_matnr.
end-of-selection.
Fill the fieldcatlog
perform fill_field.
Call the FM
perform call_fm.
*& Form fill_field
text
--> p1 text
<-- p2 text
FORM fill_field.
data wa_fieldcat type slis_fieldcat_alv.
clear : wa_fieldcat.
wa_fieldcat-tabname = 'I_MAKT'.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-outputlen = '18'.
wa_fieldcat-seltext_l = 'Material #'.
wa_fieldcat-col_pos = '1'.
append wa_fieldcat to i_fieldcat.
clear : wa_fieldcat.
wa_fieldcat-tabname = 'I_MAKT'.
wa_fieldcat-fieldname = 'MAKTX'.
wa_fieldcat-outputlen = '40'.
wa_fieldcat-seltext_l = 'Material Desc'.
wa_fieldcat-col_pos = '2'.
append wa_fieldcat to i_fieldcat.
ENDFORM. " fill_field
*& Form call_fm
text
--> p1 text
<-- p2 text
FORM call_fm.
v_repid = sy-repid.
LC_GLAY-EDT_CLL_CB = 'X'.
CLEAR ls_event_exit.
ls_event_exit-ucomm = gc_refresh. " Refresh
ls_event_exit-after = 'X'.
APPEND ls_event_exit TO lt_event_exit.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = g_status_set
I_CALLBACK_USER_COMMAND = g_user_command
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS = LC_GLAY
IS_LAYOUT =
IT_FIELDCAT = i_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT = lt_event_exit
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_makt
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " call_fm
FORM USER_COMMAND *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
data i_RSPARAMS like RSPARAMS occurs 0.
CASE R_UCOMM.
WHEN '&IC1'.
read table i_makt index rs_selfield-tabindex.
SET PARAMETER ID 'MAT' FIELD i_makt-matnr.
if not i_makt-matnr is initial.
call transaction 'MM02' and skip first screen.
endif.
when '&REFRESH'.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
CURR_REPORT = v_repid
IMPORTING
SP =
TABLES
SELECTION_TABLE = i_RSPARAMS
EXCEPTIONS
NOT_FOUND = 1
NO_REPORT = 2
OTHERS = 3
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
submit z_get_refresh with selection-table i_RSPARAMS.
rs_selfield-refresh = 'X'.
ENDCASE.
MOVE '&REFRESH' TO r_ucomm.
ENDFORM.
FORM set_pf_status *
FORM SET_PF_STATUS USING rt_extab TYPE slis_t_extab.
DELETE Rt_extab WHERE fcode = gc_refresh.
SET PF-STATUS 'STANDARD_FULLSCREEN' OF PROGRAM 'SAPLKKBL'
EXCLUDING Rt_extab.
*SET PF-STATUS 'STANDARD' EXCLUDING rt_extab.
SET TITLEBAR sy-tcode.
ENDFORM.

How to get check box in alv grid list output

hi gurus,
can anyone inform me
how to get check box in alv output it should not be a pop up window
thank you
regards
kals.

or
hi go through the fallowing code.
code*&----
*& Report YGS_ALV_BOM *
REPORT YGS_ALV_BOM .
TABLES : MAST,STKO,STPO.
TYPE-POOLS: SLIS.
TYPES : BEGIN OF TY_MAST,
CHECK_BOX,
MATNR TYPE MAST-MATNR,
WERKS TYPE MAST-WERKS,
STLAN TYPE MAST-STLAN,
STLNR TYPE MAST-STLNR,
STLAL TYPE MAST-STLAL,
END OF TY_MAST.
TYPES : BEGIN OF TY_STKO,
STLTY TYPE STKO-STLTY,
STLNR TYPE STKO-STLNR,
STLAL TYPE STKO-STLAL,
STKOZ TYPE STKO-STKOZ,
BMENG TYPE STKO-BMENG,
BMEIN TYPE STKO-BMEIN,
END OF TY_STKO.
TYPES : BEGIN OF TY_STPO,
LIGHTS,
STLTY TYPE STPO-STLTY,
STLNR TYPE STPO-STLNR,
STLKN TYPE STPO-STLKN,
STPOZ TYPE STPO-STPOZ,
IDNRK TYPE STPO-IDNRK,
MENGE TYPE STPO-MENGE,
MEINS TYPE STPO-MEINS,
END OF TY_STPO.
DATA : IT_MAST TYPE TABLE OF TY_MAST,
WA_MAST TYPE TY_MAST,
IT_STKO TYPE TABLE OF TY_STKO,
WA_STKO TYPE TY_STKO,
IT_STPO TYPE TABLE OF TY_STPO,
WA_STPO TYPE TY_STPO.
DATA : lt_fieldcat TYPE slis_t_fieldcat_alv,
ls_layout TYPE slis_layout_alv,
ls_event TYPE slis_alv_event,
lt_event TYPE slis_t_event,
it_sortinfo type slis_t_sortinfo_alv,
ls_header TYPE slis_listheader,
lt_header TYPE slis_t_listHEADER.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
SELECT-OPTIONS : S_MATNR FOR MAST-MATNR.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM BUILD_FIELDCAT USING LT_FIELDCAT.
PERFORM BUILD_LAYOUT.
END-OF-SELECTION.
PERFORM DISPLAY_DATA.
*& Form GET_DATA
text
--> p1 text
<-- p2 text
form GET_DATA .
REFRESH : IT_MAST.
SELECT MATNR
WERKS
STLAN
STLNR
FROM MAST
INTO CORRESPONDING FIELDS OF TABLE IT_MAST
WHERE MATNR IN S_MATNR.
endform. " GET_DATA
*& Form BUILD_FIELDCAT
text
--> p1 text
<-- p2 text
form BUILD_FIELDCAT USING LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
REFRESH : LT_FIELDCAT.
L_FIELDCAT-COL_POS = 1.
L_FIELDCAT-FIELDNAME = 'MATNR'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'MATNR'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 2.
L_FIELDCAT-FIELDNAME = 'WERKS'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'WERKS'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 3.
L_FIELDCAT-FIELDNAME = 'STLNR'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'STLNR'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
endform. " BUILD_FIELDCAT
*& Form BUILD_LAYOUT
text
--> p1 text
<-- p2 text
form BUILD_LAYOUT .
CLEAR LS_LAYOUT.
LS_LAYOUT-BOX_FIELDNAME = 'CHECK_BOX'.
LS_LAYOUT-BOX_TABNAME = 'IT_MAST'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
form DISPLAY_DATA .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_STRUCTURE_NAME =
IS_LAYOUT = LS_LAYOUT
IT_FIELDCAT = LT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_MAST
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " DISPLAY_DATA
FORM PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'YSTATUS' OF PROGRAM SY-REPID
EXCLUDING RT_EXTAB.
ENDFORM.
FORM USER_COMMAND USING RF_UCOMM TYPE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CASE RF_UCOMM.
WHEN '&NEXT'.
PERFORM GET_DATA_BOM .
PERFORM BUILD_FIELDCAT_BOM USING LT_FIELDCAT.
PERFORM BUILD_LAYOUT_BOM.
PERFORM DISPLAY_DATA_BOM.
ENDCASE.
ENDFORM.
*& Form GET_DATA_BOM
text
--> p1 text
<-- p2 text
form GET_DATA_BOM .
CLEAR : WA_STPO,
WA_MAST.
REFRESH : IT_STPO.
DATA : IT_CHECK TYPE TABLE OF TY_MAST.
LOOP AT IT_MAST INTO WA_MAST.
IF WA_MAST-CHECK_BOX EQ 'X'.
APPEND WA_MAST TO IT_CHECK.
ENDIF.
ENDLOOP.
SELECT STLTY
STLNR
STLKN
VGKNT
IDNRK
MENGE
MEINS
FROM STPO
INTO CORRESPONDING FIELDS OF TABLE IT_STPO
FOR ALL ENTRIES IN IT_CHECK
WHERE IDNRK EQ IT_CHECK-MATNR.
CLEAR WA_STPO.
LOOP AT IT_STPO INTO WA_STPO.
SELECT SINGLE * FROM MAST WHERE MATNR EQ WA_STPO-IDNRK.
IF SY-SUBRC = 0.
WA_STPO-LIGHTS = '2'.
ELSE.
WA_STPO-LIGHTS = '1'.
ENDIF.
MODIFY IT_STPO FROM WA_STPO.
ENDLOOP.
endform. " GET_DATA_BOM
*& Form BUILD_FIELDCAT_BOM
text
--> p1 text
<-- p2 text
form BUILD_FIELDCAT_BOM USING LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
REFRESH : LT_FIELDCAT.
L_FIELDCAT-COL_POS = 1.
L_FIELDCAT-FIELDNAME = 'STLTY'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLTY'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 2.
L_FIELDCAT-FIELDNAME = 'STLNR'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLNR'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 3.
L_FIELDCAT-FIELDNAME = 'STLKN'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLKN'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 4.
L_FIELDCAT-FIELDNAME = 'IDNRK'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'IDNRK'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 5.
L_FIELDCAT-FIELDNAME = 'MENGE'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'MENGE'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
endform. " BUILD_FIELDCAT_BOM
*& Form BUILD_LAYOUT_BOM
text
--> p1 text
*<-- p2 text
form BUILD_LAYOUT_BOM .
CLEAR : LS_LAYOUT.
LS_LAYOUT-LIGHTS_FIELDNAME = 'LIGHTS'.
LS_LAYOUT-LIGHTS_TABNAME = 'IT_STPO'.
endform. " BUILD_LAYOUT_BOM
*& Form DISPLAY_DATA_BOM
text
--> p1 text
<-- p2 text
form DISPLAY_DATA_BOM .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND_BOM'
I_CALLBACK_TOP_OF_PAGE = 'TOP9'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = 'ALV_BACKGROUND'
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = LS_LAYOUT
IT_FIELDCAT = LT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_STPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " DISPLAY_DATA_BOM
FORM TOP9 .
CLEAR LS_HEADER.
REFRESH LT_HEADER.
LS_HEADER-TYP = 'H'.
LS_HEADER-INFO = 'BILL OF MATERIALS'.
APPEND LS_HEADER TO LT_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LT_HEADER
I_LOGO = 'ENJOYSAP_LOGO'
I_END_OF_LIST_GRID =
ENDFORM.
FORM USER_COMMAND_BOM USING RF_UCOMM_BOM LIKE SY-UCOMM
SEL_FIELD TYPE SLIS_SELFIELD.
CASE RF_UCOMM_BOM.
WHEN '&IC1'.
SET PARAMETER ID 'MAT' FIELD WA_STPO-IDNRK.
SET PARAMETER ID 'WRK' FIELD WA_MAST-WERKS.
SET PARAMETER ID 'CSA' FIELD WA_MAST-STLAN.
CALL TRANSACTION 'CS03' AND SKIP FIRST SCREEN.
ENDCASE.[/code]

How to get check box in reuse_alv_hierswq_list_display? urgent

hi ,
can anyone help to know ,how to get check box in reuse_alv_hierswq_list_display
shan

Check the standard program BALVBT02
Regards
Wenceslaus

How to get OGG format in Logic Studio

How to get OGG format in Logic Studio

Presumably you can convert it to Wav, AIFF or other compatible format using a suitable conversion program (at a guess) - there are convertors to do it the other way round anyway!

I have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending

i have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
Also the mail is acting very funny by not getting the rules work in a proper method. Is ther a software to repair mail.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

How to get Port Classifications for Logical Switch via scvmm console

Hello All,
We are creating some automation tool based on SCVMM console scripts.
In order to create vm we need to assign port classification based on Virtual Switch and then logical switch. The problem is that I could not find any way to retrieve port classifications assigned to logical switch (Virtual Port tab in SCVMMs logical
switch properties). There is Get-SCLogicalSwitch that return just name, description and some properties. There is also Get-SCUplinkPortProfileSet which returns Uplink tab data of SCVMMs logical switch properties. But no api to retrieve port classifications
for switch. Get-SCPortClassification also doesn't return switch assignments. Any ideas how to get this data?

I think you are looking for
Get-SCVirtualNetworkAdapterPortProfileSet.
This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.

How to get the BOX Serial No.

Someone, know how I can get the BOX Serial Number?
I tried with: java.lang.System.getProperty();, but i retrieve only the Company Manufacturer:
java.lang.System.getProperty("havi.implementation.vendor");
I see this in HAVI documentation Api but, i not found how i can get the serial number, anyone know what i can do? Or where i can find the right Api? or if is write in a file in the system and what file?
Thank you

I'm glad that you found the site useful.
The closest thing to a complete list of properties that's available is in the MHP spec in section 11.3.1.1, part g (yes, they couln't have hidden it much better)
The properties that must be supported by an MHP receiver are:
- file.separator
- path.separator
- line.separator
- dvb.returnchannel.timeout
- dvb.persistent.root (only available if the application has permission to access the persistent filesystem)
There are a couple of extra properties that you can get from the Xlet Context using getXletProperty():
- dvb.org.id
- dvb.app.id
- dvb.caller.parameters
dvb.org.id and dvb.app.id give you the organisation ID and application ID for that application, as indicated in the application signalling. dvb.caller.parameters gives you the arguments that were passed to the Xlet if it was started by another app using the application listing and launching API - if it was started in the normal way then this is empty. A few more details about these is given in part 11.7.1.1 of the MHP spec.
This information should make it up on to my website sometime soon - I'm busy working on some OCAP tutorials at the moment, but once those are done I plan to revisit some of the MHP stuff and update/expand it.
Hope this helps,
Steve.

How to get oriental instrument in logic pro 9

I have Logic Pro 9 on Mac mini
I want to use arabic instrument like oud, Nay etc...
How can I get it?

Did that, but the notes didn't show. But now they do. Next time I'll try to open an event list window.
Can you tell me something about fading?
In every tutorial on Youtube, the press esc and the get a lot of options. I do to. However, I only have "Fade tool" and they have "Crossfade tool". Probably nothing to care about.
But I can't fade any tracks unless I bounce the track. Why doesn't the tutorials say anything about that?
I promise you, I read, searched and listen to every advice yesterday for 4 hours. Couldn't figure the fading thing. It was just a luck I tried bounce.

How to get RFC Destination and Logical System name dynamically

Hi all,
I have a RFC FM written in CRM. I need to call this FM in R/3. So, i use the syntax " Call function <func> destination <destination name>. My problem is that i need to fetch the destination name dynamically..
There is a way to do so in CRM which is as follows:
DATA: lt_siteselect TYPE TABLE OF siteselect INITIAL SIZE 0,
           ls_siteselect TYPE siteselect.
CALL FUNCTION 'SMOF0_READ_SITESELECT'
    TABLES
      to_siteselect = lt_siteselect.
READ TABLE lt_siteselect INTO ls_siteselect
         WITH KEY sitetypeid = cl_smw1_siteprovider=>c_sitetype_r3oltp.
The above piece of code returns the site and also takes care of the client you are currently working on. But the specified FM is present only in R/3..
I want to achieve the functionality fulfilled by the above code in R/3.
Kindly help.
Useful answers will be rewarded.
Thanks in advance,
Karan Merwana
I can not use FM LOG_SYSTEM_GET_RFC_DESTINATION as for that i need to provide the logical system name. And the logical system name would be different for different clients.
Message was edited by:
        Karan Merwana

For those referring this thread later, I could not find a solution to this and ultimately had to do away with hardcoding of system names based on the DEV, Q, and PROD system names.
If anyone does manage to get a workaround, please let me know.

How to get back deleted data logically

Hi
Friends
Once again need your guidance to solve my this problem.
If I have deleted data and commited.Now I want to bring that data back.
How m I to do this.I want to do it logically.
Pls help me.Is there any thirdparty software to do it logically if yes thwn what its name
Hope to hear soon
Regrds,
Chandrima Roy

There are number of ways to recover from such user erros:
1). RMAN incomplete recovery, if you have proper backups and redo logs to recover until the time just before the user error happened.
http://www.kods.net/use-rman-based-incomplete-recovery-time/
2). Flash back query, if UNDO is being managed properly.
http://www.orafaq.com/node/50
3). Flashback database if set to ON and flashback logs are being written.
http://www.oracle-base.com/articles/10g/Flashback10g.php#flashback_database
4). Last but not the least, Oracle LogMiner, required minimal setup i.e. db should be in Archive Log Mode.
For Oracle 10g:
http://www.oracleflash.com/25/Using-Oracle-LogMiner-to-undo-incorrectly-committed-changes.html
For Oracle 11g:
http://www.oracleflash.com/31/Oracle-11g-DBMS_FLASHBACK-TRANSACTION_BACKOUT.html
http://www.oracleflash.com/30/Oracle-11g-Flashback-Transaction-in-OEM-LogMiner-Interface.html

How to get back box : "Don't show this message again".

At some point, I have clicked "yes" on a box that said "Don't show this message again". It was by deleting tracks from iTunes library.
Now I want "my box" back. How can I fix that?
Dell 8400 Windows XP

hi Bevers!
what used to work for this was rebuilding the itunes preference files.
although the user tip is on a different topic, the technique for doing this is outlined here:
Scott P: My source list is missing
... my dear The Mimico Kid is my authority on this topic: if you're around, would you mind stopping by to confirm or deny if this is still what Bevers should try?
love, b

How to get alert box in the middle of scriptlet?

Hi,
I got a problem.Please help to resolve that one
In the following code the alert box is not coming even though the condition is true.
Can anyone please resolve it
<%
Cookie axsCookie;
axsCookie = new Cookie("user_id", "");
response.addCookie(axsCookie);
axsCookie = new Cookie("user_lang_code", "");
response.addCookie(axsCookie);
axsCookie = new Cookie("default_lang_code", "");
response.addCookie(axsCookie);
String logOut=request.getParameter("logOut");
if(logOut!=null)
%>
<script type="text/javascript">
var temp='<%=logOut%>';
if(temp=="true")
alert('Your password is successfully changed.Please relogin.');
</script>
<%
session.invalidate();
response.sendRedirect("/priv/logging.jsp");
%>

Hi,
Please use 3 variables of Cookie class.
<%
Cookie axsCookie1,axsCookie2,axsCookie3;
axsCookie1 = new Cookie("user_id", "");
response.addCookie(axsCookie1);
axsCookie2 = new Cookie("user_lang_code", "");
response.addCookie(axsCookie2);
axsCookie3 = new Cookie("default_lang_code", "");
response.addCookie(axsCookie3);
String logOut=request.getParameter("logOut");
if(logOut!=null)
%>
<script type="text/javascript">
var temp='<%=logOut%>';
if(temp=="true")
alert('Your password is successfully changed.Please relogin.');
</script>
<%
session.invalidate();
response.sendRedirect("/priv/logging.jsp");
%>

How to get text vertically centred in Li box

I am updating our company website in another area of the system which is why you'll see a tf in the web address I am about to give.
http://www.essentialfinance.net/tf/products/reconciling/accruals_manager.asp
Now, the problem I have is that the options in the boxes are aligned to the top.
I have had quite a problem understanding how to get these boxes to work so that they highlight when hovered etc, but eventually got there through some tutorial which seems to create a nav class hanging off the ul.
I have tried altering everything in the ul.nav, ul.nav li, ul.nav a regarding getting the text to vertical align centred but no success.
The css file is here:
http://www.essentialfinance.net/tf/main.css
I put that link in since someone may be able to pick out my faults.
I have only put a link to # (goes nowhere) to get the <a> code initialised.....
By the way - don't worry about the colour scheme... it's only temporary to test the functionality.
And I would not wander anywhere else in the site - it's a shambles which is why i'm looking at it.
Can anyone please advise? Thank you very much in advance for any feedback.
Terry

These forums are getting worse by the day. Try this link for the last time:
<http://www.mytechnet.talktalk.net/sidebar.txt>
If it works, it works otherwise tough luck.

How to get applescript or automator to ask system to "detect displays"

I want to know how to get automator or applescript to "detect displays" (which is found in Displays prefpane). Thanks.

Sorry I'm late, but this page was the only Google find on "script detect displays"
when I checked on June 26, 2011. The script commands worked immediately for
me and I offer V.K. belated thanks if he/she is still around for having solved this
longstanding problem for me. I had written a script earlier trying to do this, but it
didn't work reliably so I gave up on trying to use it.
If jockebq is by chance still around, I would recommend that he/she try doing as
I did and use a more simple version of the script, namely:
tell application "System Events" to tell the front menu bar of process "SystemUIServer"
tell (first menu bar item whose value of attributes contains "displays")
    click
    tell 1st menu item of front menu
      click
    end tell
end tell
end tell
I have this saved as a normal .scpt script and assigned to ctrl-opt-shift-d
in QuicKeys. It works every time.
Roy McCoy
Rotterdam, NL

How to get "Automation" boxs in Logic 7.1.1

Similar Messages

Maybe you are looking for