How to get back into Mac OS X Leopard after installin Bootcamp

OK have finally installed Bootcamp and now want to get back to the safe world of Mac again, however although I have been following the instructions in the manual which tell me either to...
a) set the default operating system in Windows by clicking on the Boot Camp system tray item (which doesn't seem to exist) or if it does is so hidden that I cannot find it, or,
b) select an operating system during startup by holding down the option key (which is impossible as I don't have such a key on my non mac wired keyboard)
neither of them seem to work. Whatever I do I cannot get back into my Mac operating system.
If anyone has any ideas as to what I can try I would appreciate your help.
Thanks

Hello:
I believe the following should help. In Windows XP, make your way to C:\Program Files\Bootcamp. You should see an icon labeled "kbdMgr". Double click that and look for the tab labeled "Startup Disk". Click your Mac OS volume as the startup disk. By now, you should also see the gray diamond for the Bootcamp manager in your system tray. Clicking that brings up a menu that allows you to restart in Mac OSX or enter the Bootcamp control panel where you can select a startup disk.
Bryan

Similar Messages

My mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

my mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

It sounds like you destroyed your boot partition and the recovery partition. Depending on it's age, your MacBook Air might be able to do a net boot. Plug and ethernet connection into it and attempt to boot. If it has the right firmware, it will find a net boot configuration on the net and boot that. Then it will give you a Recovery Partition like display and allow you to reinstall the OS X version that came with it.... assuming that it was Lion or ML. If your computer came with Snow Leopard, then even the net boot won't work.
At that point you need a bootable USB Key, or an external DVD drive AND a Snow Leopard installation DVD.
An Apple Store, if there is one nearby, MAY be able to get you going again. However, whatever is on the SSD now will be toast too.

I can't get back into Mac OS X; it just loads eternally.

I've been running BootCamp on my MacBook Pro perfectly for months now but today I just can't seem to get back into the Mac partition (OS X 10.6.8). I was playing a game on my Windows (Vista) partition for several hours then restarted the computer. As the start up drive is set to Mac, it started to attempt to load it. It was just stuck at the grey screen with the Apple in the middle and the endless rotating circle. Then as I waited longer the Apple turned into a "no access" symbol (the circle with a line across it) and the rotating circle just kept going and going. I waited several minutes but no luck.
So I held down the power button and this time instead of letting it auto boot Mac I held down Option and chose Mac drive myself (it was an option therefore the computer does recognize that the Mac partition is there). Same result. I rebooted into Windows (which it is still able to do with no problems at all) then went to the BootCamp assistant and pressed "Restart into Mac OS X". Same result.
I've googled it and no one seems to have had this problem. Any insight at all would be great. Thanks.

Or.... even hold down the X key while starting up.

How to get back into Time Machine after restore?

I have a MacBook. I had to take it in for repairs. Fry's gave me a loaner Macbook. I successfully used the Migration Assistant to copy all my backups onto the loaner Macbook. All my apps and docs seem to be here.
But now I want to be able to "mount" to my old Time Machine backup "stream". I tried the control-click on Time Machine in the dock to connect to a previous backup, but when I enter Time Machine I can't find any history. I should have like 2 years worth of backups.
Any hints on how to "get back on" an old time machine sequence after a restore?

RichieW13 wrote:
I have a MacBook. I had to take it in for repairs. Fry's gave me a loaner Macbook. I successfully used the Migration Assistant to copy all my backups onto the loaner Macbook. All my apps and docs seem to be here.
But now I want to be able to "mount" to my old Time Machine backup "stream". I tried the control-click on Time Machine in the dock to connect to a previous backup, but when I enter Time Machine I can't find any history. I should have like 2 years worth of backups.
Any hints on how to "get back on" an old time machine sequence after a restore?
TM keeps the backups for each Mac separate, and normally only shows the ones for the Mac it's running on, even if there are other Macs' backups on the same disk/partition.
Also, sometimes TM will start a new "sequence" of backups, as if they were from a different Mac.
To see these "other" backups, you need the (badly named) +Browse Other Time Machine Disks+ option. It's available by holding down the Option key while selecting the TM icon in your Menubar, or by control-clicking (right-clicking) the TM icon in your Dock.
You'll see a selection screen showing all the disks/partitions that have TM backups on them. Select the one you want, and you'll be taken to the normal TM "Star Wars" interface, where you should see all the backups on that disk/partition.

After upgrading to Mavericks I have adobe for my pdf reader in safari. Can someone tell me how to get back to mac pdf reader? Thank you.

After upgrading tp Maveraicks I have adobe for my pdf reader in safari. Can anyone tell me how to get back to apple pdf reader? Thank you

Remove Adobe plug ins if any.
Macintosh HD > Library > Internet Plug-ins
AdobePDFViewNPAPI.plugin
AdobePDFView.plugin

How to get back into my iphone 4

I Bought an Iphone from an craigslist and I signed in with my icloud and then I locked the screen then turn it back on and now I can't get back in even if I type the password it just goes back to this phone has been erased
iPhone 4, iOS 7.1
When I plug the phone into itunes it says log in with the apple id of the person who erased the phone I try my apple ID but it doesn't work and the ad on craigslist for the sellers number isn't up anymore what else do I do?
I did already log into the phone and everything I set my icloud up on the device but when I turn the screen off after putting in my passcode lock it was fine then I closed the screen then I tried to open it again with the passcode the apple logo came up and it brings me back to iphone lost

You have some very long, difficult sentence-like structures above.
But it sounds like you purchaed the iPhone from Craigslist, and are being asked for the original owner's Apple ID and password, and cannot supply that information.
In that case, your iPhone has been Activation Locked (explained here), and will remain useless to you:
http://support.apple.com/kb/HT5818
Get your money back if you can. And buy from a reputable source next time.

Can't get back into Mac OSX 10.4.11 after having to hard boot the system

Greetings. I have a rather quirky iMac PPC G5 with now 2G of Ram and a 2.0 chip. This issue has happened several times, the most recent was today. If the computer locks up or has a kernel panic and I have to just turn it off and then back again...I get a grey screen for a long time with the arrows in a circle, then the fans go high speed and that's it. It doesn't boot into MacOS. I am using 10.4.11 and have an ATI Radeon card. I always have to use Disk Warrior (bless them) to rebuild the drive. Sometimes nothing has changed, other times it will say a startup value has changed. Why would this happen? I suppose I could reboot from the MacOS disk, because the process can take over 2 hours using Disk Warrior. Any ideas on the cause and the cure would be most appreciated. Many thanks. Debbie

When a computer isn't shut down properly the file system can be left in an unstable state. It is very common to be left in a situation where corruption of the directories etc occurs in such cases. Files aren't properly "closed", directory extents may be incorrect, etc. This matters much more with "modern" operating systems like OSX than it did, for example, with early versions of Windows etc.
That is the reason that I was wondering what was causing your kernel panics, forced shutdowns etc. After such events one should really ALWAYS rebuild the directories anyway, even if it WILL restart. Not doing so can lead to corruption that doesn't become evident until further down the track, causing things like freezes and panics of the type you experience.
If you experience such things regularly you should really try to track down the cause of the "freezes", rather than looking for ways to avoid having to rebuild directories.
That said, one way to reduce the impact of such things to some extent is to make sure that your have "journaling" turned on for your HD. Open up Disk Utility , select your HD boot volume (the "volume", not the 'disk" - the volume will be immediately below the HD, but indented a little to the right), and see if the "format" is given as Mac OS Extended (journaled). If not , look under the "File" menu in Disk Utility and you should see an option to "enable journalling". If it is grayed out you may need to hold down the "option" key to access it.
Journaling improves the ability of the drive to "self correct" after a crash by keeping additional records of file states and locations etc.
Cheers
Rod

How to get back to Mac based calendars?

If I'm an idiot, apologies.
Anyways......Had been using MobileMe without problems. Now I'm not saying iOS 4.2.1 is the issue but it is quite coincidental that my problems started after upgrading. So, normally I can create and edit events on both my iPhone and my Mac.
Last night I tried to edit an event on my iPhone but the event button is missing. In iCal I've noticed now, (it may have been like this before, but I've only just seen it), that I now have two drop downs in the left hand pane.
The first is 'On my Mac', the second is ***@me.com
I've tried going back by turning off MobileMe sync but, any ideas on how I migrate everything back to my Mac?
Thanks.

Done it.
For those that don't know, first back up your calendar(s).
Then delete from iCal the mobile me calendars.
Then import those backed up calendars again to 'on my Mac'.
I got the info from the very quick and helpful Express Lane.

I Changed My Password on my ipad mini and now i cant remember what it is and i have tried many and it keeps disabling it for a while, how can i get back into it?

I Changed My Passcode on my ipad mini and now i dont remember what i changed it to i have tried a few and now it is disabled for 1 hour and i dont know what to do or how to get back into it, Can Someone Help me?

See here: http://support.apple.com/kb/HT1212

My computer crashed. How to get back my website designed in iweb, still online...

I designed a website in iweb, posted to a godaddy domain. Still available online.
My comouter crashed and I want to revise the website. How to get back into the old site?
Thanks!

iWeb stores its assets in the domain.sites2 file in :
~/Library/Application Support/iWeb/
If that file is missing and you haven't a backup of that file, you'll have to start from scratch.
Your problem is not unique. Search this forum for :
'computer crashed'
And no, you cannot import your current webpages.

How can I get back into my application aftermath invoking Start up page of index.htm ?

Gorgeous Hello All,
If anyone of you can please provide me a solution for the following, will help me in plentious and galore.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
A hurdle :-
I have a application which has been developed in ASP .NET, Version 4.0. Help link has been created in this application wherein here the Start up page of index.htm has been linked to be read from the RoboHelp local project folder\!SSL!\Multiscreen_HTML5\desktop. All are working absolutely fine except when
I login into the above-said application -> click on the Help page -> the index.htm opens with Contents, Index, Glossary -> Am able to successfully perform any task by respective clickings
-> But I am not able to get back into my application when I click on the IE provided Back button (Alt+Left) -> Any amount of invoking Back button makes the system getting looped into this Start up page of index.htm only -> When I Close Tab (Ctrl + W) or Close ( X ) -> The window session gets closed and I have to repeat all by relogin once again.
How can I get back into my application aftermath invoking Start up page of index.htm ?
(I can always get back into the application easily by erasing those parts in the url which refers to this RoboHelp linkages – but this certainly looks non-polished work)
Help Please
Cheese – Vipin Nambiar, Bangalore

Hey Jeff, I used Internet Explorer 10.0.9200 and Google Chrome 26.0.1410. Alas - it is the same behavior.
(But Jeff : When I used Microsoft HTML Help as primary layout to generate chm file , My Help when launched from my Application opened in a new browser window and when I closed this Help browser window did not close my application. Looks like need to write few liner code to get this issue settled )
Thanks Indeed of lots for your concerns Jeff !!!

How do I re-open and get back into my iPhoto if this message appears: "Your photo library is either in use by another application or has become unreadable"? What do I do?

How do I re-open and get back into my iPhoto if this message appears: "Your photo library is either in use by another application or has become unreadable"? What do I do?

Rebuild your iPhoto Library:
iPhoto 6 and later: Rebuilding the iPhoto library

HT1911 Someone else set up my itunes account for me and I cant remember the Apple ID, the Password, or the name he put under it all. How do I get back into my iTunes account???

Someone else set up my iTunes account for me and I can't remember the Apple ID, the Password, or the name he put under it all. How do I get back into my iTunes account???? Or at least a number to call to get back???

Go to Settings>Store>Apple ID, tap the ID shown, sign out, sign back in using the alternate ID.

I changed my Apple ID, now I can't login to iCloud because it still has my old Apple ID and the password no longer works to log me in. How can I get back into iCloud so that I can switch off Find my iPhone so I can make these changes? Thank you.

I changed my Apple ID, now I can't login to iCloud because it still has my old Apple ID and the password no longer works to log me in. How can I get back into iCloud so that I can switch off Find my iPhone so I can make these changes? Thank you. (iPhone 4s)

Well, you're gonna have to recover the password for that Apple ID:
http://support.apple.com/kb/ht5787

How can you get back into your iPhone if you don't remember the passoword?, How can you get back into your iPhone if you don't remember the password?

Help! My daughter changed the password on her iPhone and she can't remember it. How can she get back into it. Restoring is not an option so I'm hopeful there is another way. Thanks!

Hey KimmyP123,
Thanks for the question. I understand your daughter has an unknown passcode on her iPhone. The following article provides a few solutions for this situation:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
I notice you are looking for solutions other than restoring, the article does outline how you can use iCloud's Find My iPhone:
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Thanks,
Matt M.

How to get back into Mac OS X Leopard after installin Bootcamp

Similar Messages

Maybe you are looking for