How to get back the deleted request.

Hi BW gurus,
I was having a problem in ZFIGL_01 cube. 1 request was showing some error so i deleted that request without changing its status from green to red.
i then loaded the data again and now its not allowing me to activate that request in ODS because of that earlier request but when i go to reconstruct/insert tab its not showing the request which was deleted by me. Does that mean the request has been deleted from PSA also?
What will be the workaround in that case?
And in near future to avoid such kind of scenario what will be the settings required to be done so that i can see all the deleted requests in insert/reconstruct tab irrespective of the status of the request.
Now this will create problem from tommorrow onwards in my PC if it doesnt get solved. Kindly reply as early as possible.
Thanks
BW user.

hi,
Hope the upload is delta,
1. Goto TX: RSMO and identify the request.
2. change the request to Red/Green.
3. Reload the data.
suggestion: If it is a delta upload, Check the timestamp at R/3 or ERDATE before reload.
Regards,
Vijay

Similar Messages

How to get back the deleted order in EBP in to SRM-for which R/3 ord.exists

Hi Sap gurus,
We have implemented extended classic scenario in SRM 5.5. The issue is one of the local EBP order is deleted from our SRM system. As a general rule the backend order is also to be deleted from the system. But to our strange the backend order is not deleted in the R/3 system. Now we want to get back the local EBP order in to our system. Is there a way we get this again in our EBP system?
In BBP_PD tcode we have one entry as below. By using the GUID of this order can we get the order back in to EBP?
HEADER I1040 DELETED X
Thanks & Regards
Satish

Hello psamp,
If your PO has status 'Deleted' in SRM, at header level, field DOC_CLOSED from BBP_PDHGP table should be set.
For PO status change, you can use CRM_STATUS_UPDATE function module with two rows in table JEST_UPD:
- one to inactive deleted status :
MANDT = your client,
OBJNR = PO Guid,
STAT = 'I1040',
INACT = 'X',
CHGNR = existing value + 1
- one to active ordered status:
MANDT = your client,
OBJNR = PO Guid,
STAT = 'I1043',
INACT = ' ',
CHGNR = existing value + 1
For header level, see BBP_HDRPROC_SET_STATUS_FLAGS function module.
Regards.
Laurent.

How to get back my deleted mail message

how to get back my deleted message

Not very likely, but It's possible, but you must quit using the Computer immediately.
Either boot this one in Target mode...
http://docs.info.apple.com/article.html?artnum=58583
And recovering from another Mac, or booting this Mac from another HDD, then using Data Rescue II...
http://www.prosofteng.com/products/data_rescue.php
(Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
Or professional Data Recovery Services.
BUT, every second you use that Mac the chances will be slimmer.

My mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

my mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

It sounds like you destroyed your boot partition and the recovery partition. Depending on it's age, your MacBook Air might be able to do a net boot. Plug and ethernet connection into it and attempt to boot. If it has the right firmware, it will find a net boot configuration on the net and boot that. Then it will give you a Recovery Partition like display and allow you to reinstall the OS X version that came with it.... assuming that it was Lion or ML. If your computer came with Snow Leopard, then even the net boot won't work.
At that point you need a bootable USB Key, or an external DVD drive AND a Snow Leopard installation DVD.
An Apple Store, if there is one nearby, MAY be able to get you going again. However, whatever is on the SSD now will be toast too.

My 2y child pressed the iphone screen many times accidently and password screen is gone. How to get back the pwd screen ? I have the valid pwd .

my 2y child pressed the iphone screen many times accidently and password screen is gone. How to get back the pwd screen ? I have the valid pwd.

Reconnect it to the computer to which you last synced it.
For more information see http://support.apple.com/kb/ht1212

10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help.

10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help. I really just need mail file and desktop files recovered.

If data were on the SSD drive with TRIM - practically no chance. If HDD - use DIY recovery software such as DiskDrill or DataResue.
As quickly as possible turn off the drive where deleted data.
Use an external HDD with installed OSX for data recovery.
Alex
Apple Certified Support Professional

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get back the non used part of the old plan?

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get back the non used part of the old plan?

Hi edilsoncf,
I've seen your question on several forums, and responded there. Did you get your subscription sorted out?
See: How do I get a refund if I have multiple Acrobat service subscriptions?
Best,
Sara

I have update my Mac to OSX 10.9.1 Maveric, all text in sidebars and others have been decreased.Why? How to get back the size?

I have updated my Mac to OSX 10.9.1. All text in the bars have been decreased in size after the installation. How can I get back the former size?

In the iCloud preference pane, sign in to the same account you use on the other devices, if you haven't already done that. Then check the box marked Contacts.

How can get back the empty trash

How can I get back my empty trash in my make book pro?

Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

How to get back the emails from an old hard drive that has no more OS ?

Hello,
My computer crashed recently.
The problem came from Windows somehow. So the hard drive is fine.
since windows couldn't be repaired I just copied a disk image backup to a new hard drive.
The problem is that I lost all the emails that were recieved between the moment I did my backup and now.
I can still access the folder :
%USERPROFILE%\Application Data\Thunderbird\Profiles\XXXXXXXX.default\Mail\
How can I use the files in that folder in order to get back my emails in Thunderbird ??
thanks for your help!

Thunderbird mail is stored in MBOX files. these will be locted in the mile folder (well sub folders) along with an MSF index of their contents with the same name.
This add-on https://addons.mozilla.org/thunderbird/addon/importexporttools/ will import MBOX files. Once installed it adds an entry to the bottom of the Tools menu.

Anyone know how to get back the icons in that download tab?, Anyone know how to get back the icons in that download tab?

My icons in that download files thing is gone. Anyone know how to get it back? Thanks!
http://i1179.photobucket.com/albums/x385/Claused/ScreenShot2013-03-31at114810PM_ zpsae5a9824.png

You could try booting into your Recovery partition (holding down the Command and R keys whilst booting) and use Disk Utility to verify and, if needed, repair your hard drive. If everything seems to be OK, you can reinstall OS X - just a 'fresh' install, it won't hurt your data (though it's always a good to backup your data) and it may fix the problem.
Clinton

How to get back the enhancement implementation?

Hi, when I tried to change ENHANCEMENT-SECTION gn_delivery_create_02 in function GN_DELIVERY_CREATE, there is an implement to OIO_SAPLV50S:
Post deliveries
ENHANCEMENT-SECTION     gn_delivery_create_02 SPOTS es_saplv50s.
PERFORM gn_lieferungen_buchen.
END-ENHANCEMENT-SECTION.
$$-Start: GN_DELIVERY_CREATE_02----$$
ENHANCEMENT 80 OIO_SAPLV50S.    "active version
    if if_oio_simulate is initial.
      perform gn_lieferungen_buchen.
    endif.
ENDENHANCEMENT.
$$-End:   GN_DELIVERY_CREATE_02----$$
I modified ENHANCEMENT 80 and actived it, but when try to change it again, I click the menu "undo" by mistake, then the ENHANCEMENT 80 OIO_SAPLV50S was disappeared.
This implementation was created by Oil and Gas business function set, our system doesn't need it, but the code should not disappear. And we still can see it in SE19, it is belong to Enhancement Implementation OIO_SAPLV50S.
How can I make the code display again?

Hi,
Have you checked the version for the program you undo the enhancement ? If I understand you correctly you deleted the enhancement spot in main program (which also means access key was entered before for this program). In this case previous versions maybe helpful.
Regards,

How to revert back the deleted the message varient in Process chain

Hi All,
By mistake i have deleted the message varient for one loading infopackage process in one process chain in production.
These chain was not in dev and quality. I need to know this message and to whom they were sending this message.
Is there any way to know revert back the message details ?

Hi Dennis,
It was physically deleted.
I will explain in more detail :
i have one process chain which has 4 info packages in parellel, after these info packages there is END process which combines all info packages.In this END process there was a Message which used to send mails to business users.
Today i have removed the END process by mistkenly. I dont know what was the message and who are the recepitents.
It has happend in production and we dont have any back up.
Now i want know the what was message and to whom this message was used to send.
Thanks in advance

How to get back the App Store icon

After update I can not get App Store nor get back my already downloaded games

Download past purchase
http://support.apple.com/kb/HT2519

How to get back the midnight theme after a complet...

Hi all, I was having some problems with my new N8 so i decided to do a 'Delete data and restore'. The midnight theme is now gone and for the past 3 days I've been trying the software update and nothing shows up. How do I get it back?
Thanks

Seems you didn't back up your data before reset. Go back to the site from where you downloaded it or look at ovi store.
Also look under installation files in application manager in your phone.

How to get back the deleted request.

Similar Messages

Maybe you are looking for