How to get battery info

I'm running Panther on my powerbook & wondering how I can get info on my battery such as cycle counts. This does not show up in my system profiler.
Thanks,
Bob

Download [XBattery 1.0.1|http://www.brothersoft.com/xbattery-123037.html].

Similar Messages

HT4061 how to get full info about the iphone by putting the imei number in pc

how to get full info about the iphone by putting the imei number in pc

https://discussions.apple.com/message/23921736#23921736

TS4006 I was able to get a location on my stolen MBP but I didn't get the email notification in time to log into to iCloud to view the location, it is only viewable for 24 hours. Does anybody know how to get that info back? I've been on the phone w/Apple

Hi,
Does anyone know how to get in touch with iCloud support directly? All iCloud support roads lead to CPU tech support. My stolen MBP finally came online and gave a location but I didn't check my email for a couple days, was sick, and iCloud only displays location map for 24 hours. Desperatly trying to regain the location info. I live in a small town so location info might actually lead to the recovery of my baby.

Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
pinto123 wrote:
i did every thing you said and when i went to restore this is what happened: the ipod software update server can not be contacted. make sure your network settings are correct and your network connection is active, or try again later. what do i do to restore. i used the last way to do it the dfu

How to get battery out of 2G Iphone

How do i get battery out of 2G Iphone

Davidsi,
The only way to get that information is to restore from the backup contrary to what the Genius said.
If you restore from that backup, you can sync, backup, or write down any and all information until everything is backed up..
After that, you can then restore the iPhone, setup as new, and sync all of the information you previously synced and go on with your merry life.

How to get the 'info' button working again in Spotlight?

The 'info' button to get info about an item in the search results window of Spotlight is no longer working for me. I have tried reindexing and trashing the preference file in the user library, with no luck. Any idea how to get this functionality back?
Thanks
Chris

I have the same problem after installing Safari 3, the more info icon in the spotlight results no longer works.
Dan

How to get battery percentage

How do I get battery percentage on iPod touch?

See: https://discussions.apple.com/message/18492152#18492152
However, due to the nature of the iPod's battery, the percentage will probably jump around a lot and it won't always have an accurate reading.
Also see:
Battery Percentage: iOS and Mac

How to get battery percentage? cant find it in settings

Just trying to find in my setting on how to get the percentage of battery power I have and I cant seem to find it. Im probably over looking it.
Can anybody tell me exactly where to go?

Settings - General - Usage - Battery Percentage = On

How i get hardware info with Java Applet

Hello Everybody.
first I am sorry for my english. This my first topic. I am a php developer and learning Java. I am developing a Java Applet.
Can i get client hardware info with Java Applet
Ýf i can How i do get hardware info with Java Applet.
I need sample code or documentation.
Thanx.

TrojanMyth wrote:
Hello;
Can i get hardware info with Java ?? Have not a know people ?Applets are restricted, unless, as already noted, they are signed and accepted by the user. See
http://java.sun.com/docs/books/tutorial/deployment/applet/security.html
http://java.sun.com/docs/books/tutorial/deployment/applet/properties.html
In general, since Java is designed to run on multiple operating systems and machine architectures it does not provide much access to the underlying hardware. As mentioned, you can access the os via methods in the java.lang.ProcessBuilder and Runtime classes.

How to get dblinks info

Hi ,
I have a set of dblinks
is there any way for me to find out who are the users and what are the tables being accessed by these dblinks ?
this is for Oracle8i & 9i
pls advise
tks & rgds

DB Links can be private or public. The ability to create a db link is also a priv that needs to be granted - and which can be taken away again after a private link has been created. So security wise, it can and should be managed appropriately.
> is there any way for me to find out who are the users
Who can use these links? Exactly who you allowed to use these links.
Interactively? An option such as auditing comes to mind if you want to monitor this - but only after correcting any security problems regarding db links first.
> what are the tables being accessed by these dblinks
It may not be tables. It could be views, synonyms, stored procs, functions, pipelines table functions, etc. DB links are used to access remote objects - just what that remote object is physically, is not really an issue that the local database is concerned about.
This would be best done by securing the remote db properly. Do not create a db link directly into a remote app schema. Instead use a bare bones create-session-only remote schema. Have the app schema grant SELECT and whatever other access required to this bare bones schema. Enable auditing on the bare bones schema. Then create the db link (from the other database) into that remote database using that bare bones schema as the remote user.
Basically, to get the "info" in a meaningful way requires a meaningful/sensible implementation. Quick-and-dirty... well, you could hack the shared pool to try and pick up SQL cursors containing db links references. But that is a cumbersome method and far from bullet proof in terms of detecting all calls (as PL/SQL db-link calls will for example not be found).

How i get user info from ldap using java after authenticating user with SSO

Hi
I have one jsp/bean application as a partner application with SSO.
It works fine.
Now i need to get other attributes of user from LDAP who has logged into the application through SSO.
using SSO java APIs i only get username, userDN, subscriber info.
To get user's other attribute i have to user LDAP APIs for that i have to create on Directory Context, for the same i need userpassword.
so here i my question, how do i get user password after he has logged in thro SSO.
regards..
and thanking u in advance
samir

Valentina,
there's no way to get the password value from the directory (it's one way). Of course you can get the hashed (MD4,MD5,SHA-1) base64 encoded value (i.e. the value you see in OiD) but not the 'password'.
--Olaf

ASP / PHP pages: How to get streaming info from a XML file?

Hi all
I am using Adobe Flash Media Streaming Server 3.5 but I can't find any output file (fx a xml file) that I can pull out info from and use on my website via a PHP or ASP script. It could be nice - in the website - to retrieve info like "online users attending", "running / streaming state" (online or offline) and other relevant info about the streaming, so I on the website can display how many that are online when a webtv event is streaming.
I see the the info when I login at the web admin for FMS, but I need a solution that can work with ASP or PHP.
I simply can't find any file / address to get this kind or output out of FMS - can you help?
Thank you
Kind regards,
Jens

hi,
can you share php code for grabbing data. i make php code using "simplexml_load_file" but the problem is it takes 2-3 minutes before it show the result. i want to monitor the current video if stop feeding.
http://server1:1111/admin/getLiveStreams?auser=admin&apswd=admin&appInst=appname
xml
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<result>
<level>status</level>
<code>NetConnection.Call.Success</code>
<timestamp>3/21/2015 7:47:17 AM</timestamp>
<name>_defaultRoot_:_defaultVHost_:::_0</name>
<data>
<_0>appname</_0>
</data>
</result>
here;s my php code:amsstats.php
<?php
$result = simplexml_load_file("http://server1:1111/admin/getLiveStreams?auser=admin&apswd=admin&appInst=appname");
echo $result->data[0]->_0;
?>
result:
http://server2/stats/amsstats.php

How to get document info..???

Hii all..
I am trying to retrieve the doc_info of a particular document from oracle webcenter content using RIDC by following method :-
public void info() throws IdcClientException, IOException{
IdcClient client=getConnection();
DataBinder binder=client.createBinder();
binder.putLocal("dDocName", "COOPER_4444001205");
ServiceCallUtils ss=new ServiceCallUtils();
List doclist=new ArrayList();
DataResultSet data=ss.getDocInfo(binder);
System.out.println(data);
doclist= data.getRows();
Iterator it=doclist.iterator();
while(it.hasNext()){
System.out.println(it);
but ss.getInfoData is not returning anything and the DataResultSet data is remaining null.
Does anyone know how to fix this...???
Edited by: 938480 on Jun 13, 2012 7:10 AM
Edited by: 938480 on Jun 13, 2012 7:22 AM

All getDocInfo does is the following:
return binder.getResultSet("DOC_INFO");
You must first execute some sort of DOC_INFO service call to get the DOC_INFO ResultSet.
binder.putLocal("IdcService", "DOC_INFO_SIMPLE");
DataBinder result = null;
try {
ServiceResponse response = client.sendRequest(userContext, binder);
result = response.getResponseAsBinder();
DataResultSet data=ss.getDocInfo(result);
} catch (IdcClientException e) {
Jonathan
http://redstonecontentsolutions.com
http://corecontentonly.com

How to Get Additional Info from LDAP

I have an application that is using LDAP authentication. Its working great but I would like to know if its possible to extract additional information about the user at the the point of authentication. For example when the user logs in and is authenticated it would be nice to be able to get their email address, phone, etc. at that time. Is this possible with the existing authentication scheme? I didn't see anything mentioned in the Help text.
Thanks.
David

Tom,
Have a look at the code I posted in this thread -
Re: help with htmldb_ldap.is_member function
Whilst that thread is more related to using the is_member function, the code I posted shows how you can query the attributes for a particular DN in an LDAP server.
So....I don't want to put the cart before the horse, but if it helps your case to make Apex (as it's known now rather than HTMLDB) "the winner", then I would stress that this feature is definitely achievable (but how difficult it is will depend on your exact requirements).
In short....definitely do-able....

Generic Object Services(GOS)-how to get Attachment info like Title and Type

Hi,
I would like to know the type of document attached whether PDF, JPG,TEXT file etc.
Ideally I could see these as an icons on the Attachment List window.
Here my requirement is i need to create a report program which lists the attachments information as below:
Title of the attachment                         Attachment Type
<Title1>                                                  Pdf
<Title2>                                                 Text or Notepad
<Title3>                                                 jpg or Image
How can i get this title and Attachment(document type) information.Can you suggest table or FM or Class/Method etc?
Thanks In advance.
Regards
Lokesh

Hi Folks,
I got the answer.
There is a parameter OBJECT_HD_DISPLAY in the FM 'SO_OBJECT_READ' which i need to capture. This will contain the title and the doc type extension ( notepad - txt ; adobe - pdf etc ).This will solve my problem.
Thanks
Lokesh

How to get detail info of application acknowledgement in BPM send step

Hello
in BPM we will send an async message to SAP backend system, we need to know if the message is successfully process or not, if not, we need to get the detail info which is returned in the acknowledgement message.
As you know in PI monitor, you can open the acknowledgement message and you can see the error texts that are sent by the SAP backend system to PI in the acknowledgement message. However seems like there is no standard way in PI BPM to get the error texts inside the acknowledgement. In the send step you can only specify that application ACK is required, if negative ACK comes in, an exception is raised and you can handle the exception in the exception branch. However there is nowhere to capture the acknowledgement message to get the detail error texts.
Anyone has good idea to get the error texts from the application acknowledgment message inside BPM/
Thanks

we need to know if the message is successfully process or not, if not, we need to get the detail info which is returned in
the acknowledgement message
One way to have the above requirement done is make the process synchronous (if RFC/ Proxy). The response message should contain the state of processing of the message inside SAP....now in the BPM make a check on the response message to see if it is a success or failure....you can apply logic like is success terminate the BPM without any alert.....if failure raise an alert/ send a mail.
Regards,
Abhishek.

How to get battery info

Similar Messages

Maybe you are looking for