How to get battery out of 2G Iphone

How do i get battery out of 2G Iphone

Davidsi,
The only way to get that information is to restore from the backup contrary to what the Genius said.
If you restore from that backup, you can sync, backup, or write down any and all information until everything is backed up..
After that, you can then restore the iPhone, setup as new, and sync all of the information you previously synced and go on with your merry life.

Similar Messages

  • How to get water out of my iPhone 5 screen?

    I got caught in heavy rain and now there looks like there's water under my iPhone 5 screen. Now the touch screen doesn't actually work properly but the apps and stuff seem to be working fine. Is my phone ruined or will it just dry out and be okay? Can I get the water out?

    Get a bag of uncooked white rice. Put the phone in it and leave for a few days. The rice might absorb the moisture.

  • 6700 - any idea how to get battery out?

    Stupid question I know but I've bought a 6700 (off Ebay) and it's arrived with the battery in. I need to release it so I can fit my Sim into it.
    Any clues? It's driving me mad!

    http://www.gsmarena.com/nokia_6700_classic-review-376p3.php
    try this, i would try to use a finger nail or something sturdy but so as it would not damage the batt and cover and gently pull up from the back where there are no golden connectors. you might have to use somethign other than just your hand a strong nail might do. just pull it up it should be ok, as it is a new phone the batt fits really snugly i have the same headache on the n97 hope this helps you a little bit.  
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • How do I get the battery out of my iphone 3g?

    HELP, how do I get the battery out of my iphone 3g?

    iPhones are not designed to be user servicable.
    There is no reason to remove the battery.
    If you believe the battery is defective or no longer holding sufficient charge, take it to Apple for evaluation and possible replacement.
    Attempts to open the device by anyone other than Apple will void all rights to support from Apple.

  • How do I find out if my iphone is a 3G or 3GS?  I bought it used.  I'm looking to buy ad install a new battery.

    How do I find out if my iphone is a 3G or 3GS?  I bought it used.  I'm looking to buy and install a new battery.  I hve seen batteries and the tool kits for sale on ebay.  I replaced the motherboard in my MacBook Pro 17" so the iphone battery is not very daunting.  I just ned to make sure I buy the right one. 

    Have a look at this article:
    http://support.apple.com/kb/HT3939

  • How do I find out who my iPhone 4S is locked to? I can't get passed the activation screen.

    How do I find out who my iPhone 4S is locked to? I can't get passed the activation screen.

    How can you not know this? Where did you get the phone?
    Ask whoever you bought it from or call AppleCare and give them the serial number.

  • How do i get sand out of my iphone 5?

    Got sand in there on the beach, now a few of my buttons don't work properly. Any ideas how to get it out?

    cept for randy newman...

  • How can I find out if my iphone has been synced to another computer? (Backup/Sync Privacy)

    So it would seem easy for someone (lets just say a girlfriend for example) to plug my iPhone into her computer while I am staying the night and backup to iTunes.  I have my settings to "require a passcode immediately", however there was one day there was access to my passcode at her place while I was not there. So my question is three-fold:
    - How can I find out if my iphone has synced with another computer/iTunes (possible history in the iPhone)?
    - Are there additional privacy settings to make sure no one can backup my iPhone by plugging it into their iTunes?
    - If it has been backed up to another computer is there anything that can be done.
    One reason I ask this is because earlier this year her phone was backed up to my iTunes on accident.  I did not know it was there until months later, but was able to access it with software.
    Thanks!
    iPhone 5s
    iOS 8.1.2
    iTunes 12.0.1.26

    jeffr747 wrote:
    So it would seem easy for someone (lets just say a girlfriend for example) to plug my iPhone into her computer while I am staying the night and backup to iTunes.  I have my settings to "require a passcode immediately", however there was one day there was access to my passcode at her place while I was not there. So my question is three-fold:
    - How can I find out if my iphone has synced with another computer/iTunes (possible history in the iPhone)?
    - Are there additional privacy settings to make sure no one can backup my iPhone by plugging it into their iTunes?
    - If it has been backed up to another computer is there anything that can be done.
    One reason I ask this is because earlier this year her phone was backed up to my iTunes on accident.  I did not know it was there until months later, but was able to access it with software.
    Thanks!
    iPhone 5s
    iOS 8.1.2
    iTunes 12.0.1.26
    - How can I find out if my iphone has synced with another computer/iTunes (possible history in the iPhone)?
    You don't.  Nothing gets stored on the iPhone about what computers the device has been backed up to.
    - Are there additional privacy settings to make sure no one can backup my iPhone by plugging it into their iTunes?
    Yes, it's called a passcode lock.
    - If it has been backed up to another computer is there anything that can be done.
    No.  You might consider changing your Apple ID password to be on the safe side, though, as well as your security questions.

  • HT3965 how can I find out if my Iphone has been jailbroken, I think my ex did somthing to my phone to spy on me

    How can I find out if my Iphone has been jailbroken?!, I think my ex has installed spyware to spy on me, an I have red that the iphone has to be jb for spyware to work. Can anybody help me?

    NPR just ran a story today on how abusers use smartphones to stalk and control domestic abuse victims,
    Check out the story at National Public Radio: http://www.npr.org/blogs/alltechconsidered/2014/09/15/346149979/smartphones-are- used-to-stalk-control-domestic-abuse-victims.
    Bottom line: trust your gut and if you think you are being stalked like this or if you think an ex knows too much, then you should turn off your phone and go somewhere safe until you can get some help. You could try the National Domestic Violence Hotline at 1-800-799-7233 .
    I hope the snark I see in some earlier comments as unhelpful to the specific (and serious) question asked.
    Good luck, miss magik.

  • How to Get In & Out of Match, Get your Downloads and Run

    How to Get In & Out of Match, Get your Downloads and Run 
    So you have read the marketing hype, and are thinking what you really want is to pay for the service to upgrade your low quality bitrate files to a bit better 256KBPS rate easily, as don’t fancy rebuying/ reimporting or other method
    This guide should show you the fastest route to achieve you upgrades
    It assumes you’re working from your main music library, and know something about IT, and have <25k of music files
    Backup your music files
    If you know how to do this, its simple right – so once done then move to step 2, if not read below so you don’t blame me for a loss
    Transfer Hardware
    your choice the transfer hardware, suggest offline harddrive via USB3.0 (blue USB connector/eSata/ 1494b/1GB NIC/etcetera but your call
    If you use USB2.0/ 100MB NIC/1394a or other lower transfer method, accept the time hit
    Don’t use Time Backup/local disk backup software unless you have RAID 5 setup or better (and if wondering what that is, you almost certainly don’t then)
    Don’t use  internet backup service unless you live next door to the hosting company, with stunning internet connection to envy 99.9% of the human race, remember this is the fast method folks)
    Transfer Software
    I am assuming you know how to do a copy n paste/ robocoby/xcopy/drag n drop or whatever method turns you on via finder/explorer/cmd window ect
    Caveat #01: If not sure how to do above, then stop now as you are not IT literate ready for this
    Find your music files and back them up
    Now keep the computer running, preferably with nothing else running from this point for ease of use bar an active internet connection, and power saving switched off
    If you know where the files are great, backup the files, but some don’t so for them as below
    Caveat #02: if you don’t know how to find them your most likely on default settings, or sitting with a legacy from a past upgraded machine - below should help but you might want to stop now if you have never been curious about the location before
    Within iTunes , go to [Edit/Preferences/Advanced] and note down the location shown for Itunes Media Location
    In the same location of preferences, hit [Keep iTunes Media Folder organised] and let the application do its stuff.  You will end up with the location in 1ciii a ready to copy location which for simplicity of topic, copy the whole folder and its subfolders.  You may end up with some extra copies of music files (an iTunes safety mechanism, but it won’t show in the folder location, and we can ignore later on)
    Enable Match (after paying for the service)
    Run Match
    Accept that the Apple iTunes process is not perfect, may crash/stop/pause and reboots will be needed, and we can move on so to speak. Key here is you cannot do an unattended script or assume no end user interaction needed L
    Turn on iTunes Match, notice the new ITunes Match on the left hand sidebar, click it, then hit the Start button – if it works and you eventually get to STEP 3 perfect.
    If it fails before getting to STEP 3, reboot and restart
    If this still fails to get to STEP 3, then create a new iTunes database (browse forums on how to do), read your media files from the location in 1civ
    Stop MATCH  (the upload process only, not the service)
    Once STEP 3 starts, CLICK STOP - ASAP, as all this does it upload data, and you don’t want to do this, just get your upgraded files (remember the title of this entry your reading!)
    This also avoids future issues with Album art lost
    Delete Matched low bitrate files
    Create a NEW SMART playlist, with two criteria
    Show all files with bitrate is less then 256
    Show all files where iCloud status is MATCHED
    In the new playlist, click it and it shows the files we want to blow away. 
    Click Edit / Select All then
    Click ctrl in windows/apple  (cmd) logo in mac, and press delete button, ensuring you do NOT tick the delete from iCloud Option.  Now want a few mins for it do do its stuff.
    Download Upgraded BitRate Files
    In the same location as 5, reselect all, and right click, and select the option to download all, and off it goes
    On the lefthand sidebar in iTunes, click Downloads, and you will then see in the middle bottom screen an option for simultaneous downloads (select it)
    Your done Just let the app now do its stuff. I would ignore the message saying you can get on with other things, and use anther machine, preferably not using the same internet connection.
    Optional Steps:
    Click randomly from the Itunes/Matched/256KBPS listed files, and play them.  Not all the files, one every 30 or so, and just the start, then last few seconds to check not dead or corrupt files.
    Update your Step 1 backup with the new files, which is going to take up more space, guess at 40%.
    Kill your iTunes Match account (both the recurring automatic subscription, and  the account if not continuing to use the store part of iTunes)

    bump

  • How to get photos from mac to iPhone 6? when i try it just comes up iCloud instead of my photos

    how to get photos from mac to iPhone 6? when i try it just comes up iCloud instead of my photos

    Make sure Settings > iCloud > Photos > iCloud Photo Library (Beta) = "Off"
    Then sync your iPhone using iTunes and make sure your sync settings for photos are set correctly in iTunes.

  • I update my IPhone4 to IOS6 from IOS4.3.3. My all songs are missing in the Iphone4. How to get those songs into my Iphone from ITunes. Even after sync also not coming to IPhone.

    I update my IPhone4 to IOS6 from IOS4.3.3. My all songs are missing in the Iphone4. How to get those songs into my Iphone from ITunes. Even after sync also not coming to IPhone.

    The iphone is not  storage/backup device.
    The sync is one way - computer to iphone.
    The only exception is itunes purchases.  File>Devices>Transfer Purchases
    You should copy everything from your old computer, or your backup copy of your old computer, to your new one.

  • How to get the manufacturing date of iphone 5s?

    how to get the manufacturing date of iphone 5s?
    thanks

    Enter your serial number here:
    www.appleserialnumberinfo.com/Desktop/index.php
    To find your serial number:
    Settings > General > About > Serial Number

  • How to get the itunes code of iphone 5s

    how to get the itunes code of iphone 5s
    I am from india ....
    the itune setting doesnot give me none option in my phone ....
    And i dont know the itunes gift code ...
    So pls give me the detail how to get the itunes code and what is it ?

    It would have been better if you had added a reply on your original post instead of starting a new thread : https://discussions.apple.com/thread/5514146?tstart=0
    iTunes gift cards are an alternative way of paying for content from the store, but they aren't available in all countries (and the cards are country-specific, they can only be used in their country of issue). The gift card field on the account set up page is optional, and as gift cards aren't available in India you won't be able to fill it in anyway.
    There are instructions on this page for how to create a new account without giving credit card details and will give you the 'none' option : http://support.apple.com/kb/HT2534 - the instructions won't work with existing accounts, and if you didn't use those instructions when creating your existing account then you will need to enter credit card details before you will be able to use it to download content

  • I need to find out my balance or my iTunes account. How do I find out on my iPhone 4s?

    How do I find out on my iPhone 4s?
    I wanna buy a 10$ iTunes card but need to know if my negative balance is more or less than 10$

    Welcome to the Apple community.
    You can view your credit balance in a number of locations, for example, iTunes closed> music> new releases, scroll down to the bottom of the screen and your credit should appear under the Apple ID.

Maybe you are looking for

  • Start Routine logic to delete records which do not satisfy a condition

    Hello, Iam trying to code a start routine to delete the records from the source_package if a certain set of conditions are not met. It is failing at the last statement. Pls help. Thanks Jagadish code is as follows.. LOOP AT SOURCE_PACKAGE assigning <

  • Word to PDF - restore hyperlinks

    I converted a word document to pdf and had hyperlinks in word pointing to a folder on the network (not a file). For example: \\ServerName\ABC\OUTFILES\DEF\ In acrobat the link got lost and was trying to re-create it. There is an option in "Tools" - "

  • PO release strategy- order of names

    Hi! I have 3 releasers and either of the 3 may release the PO first that's why I did not ticked any prerequisites.  However, I would still want the names to appear in a certain order in the PO release tab.  How do I control this? Example:  the order

  • Order related item and delivery related item in one billing document

    Hi Experts, how can we include order related item and delivery related item in one billing document . Please give me the configuration logic .

  • Labview 5.0 Build Applicatio​n serpdrv : how to generate it

    I am trying to build an executable file from a Labview 5.0 library that comprises all the needed subroutines. I manage to build the application succesfully. At the end of the process I get the following message: Application build succesful Remember S