How to get booklet printing?

https://discussions.apple.com/message/15194920#15194920
ETA: I'm investigating suggestions here, unless someone has found a better solution.
Edit again: http://www.macupdate.com/app/mac/21068/create-booklet-pdf-service
Trying this one...
Hey everyone,
I'm very frustrated. I can't figure out how to accomplish booklet printing in Word or Pages. Pages often does things simply that Word fights tooth and nail, but I can't figure this one out.
Apparently, old versions of Word supported booklet printing, which would allow the document to be printed with 2 pages facing each other, then cut the pages down the middle (gutter) and bound. Or stapled down the middle. However, I'm finding this an impossible task.
I'm using Word 2011 for Mac. Pages 4.1. Snow Leopard.
The end result I want: A landscape-oriented, two-sided (I have duplex printing on my laser printer) document with 4 pages to a sheet (2 front, 2 back), than can be cut down the middle and bound on the resulting left side, just like a "regular" book.
I don't have the option for "booklet printing" under page setup in Word, and I don't know how to set it up in pages, because I can't even find a way to make it landscape orientation! (Yes, the computer is plugged in.)
Please help me.
Thanks in advance.

I can't help you with Word. I use Pages and Create booklet. http://www.macupdate.com/app/mac/21068/create-booklet-pdf-service
Install the create booklet service and you'l will find the option in the File > Print window.
Write the document with normal pages. Save the original first in Pages format. Then press Cmd + P choose PDF button down to the right. In the pop up menu choose Create booklet. Wait a few seconds an Preview will open the new document with the pages imposed ready to be printed.
I can't help you with the duplex printing though. What I do when I print the document is to in the print dialog first print the odd pages and then after I put back the printed papers I print the even pages.

Similar Messages

How to Get the Print of General Ledger with Opening balances

Hi Friends.
How can I get the print out of G.Ledger with all line item transactions and opening balances in a company code?
Please explain.
Regards.
Srini

hi
for line item-
goto s_alr_87012282 and select menu bar "list">print
for g/l statement
goto s_alr_87012332 same step above
rgs

HT3669 Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. Can someone please advise me how I get the printer to work with my i-Mac? I have installed it but documents don't print. Thanks

Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John Lee

Looking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page.

How to get the printer button to appear

The buttons on my printer should say scan, copy & print.
They are now saying scan, copy & copy. how do I get the print button back, as I cannot print

Hi,
What is the exact printer model? is it the HP Photosmart C4385?
The following model does not provide any fax capabilities as you may find by its datasheet below:
http://cdn.cnetcontent.com/b6/14/b6144c8e-0a16-4ce3-a66d-2eb03e86f4d9.pdf
If I misunderstood your pritner model, please clarify the exact model.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to get rid Print Dialog in Smartforms

Hi,
We are using ECC 6.0. I have the following code for calling smartforms:
DATA: ltp_control_parameters TYPE ssfctrlop,
ltp_output_options TYPE ssfcompop.
ltp_control_parameters-no_dialog = 'X'.
ltp_control_parameters-preview = 'X'.
ltp_control_parameters-preview = 'LOCL'.
ltp_output_options-tddest = 'LOCL'.
The problem is that the print dialog appears and asking for output device. How to get rid this?
thanks,
sid

hi all,
thank you for replying. i got rid of the print dialog box by filling in defaults->spool control->output device in the user profile->own data. And i just set the following in my code:
ltp_control_parameters-no_dialog = 'X'.
ltp_control_parameters-preview = 'X'.
And also previously i mistakenly reset ltp_control_parameters-preview to 'LOCL' (refer to my previous post).
regards,
sid

How to get Network Printing to work with Brother!!

So i have my BROTHER DCP-7020 printer connected to my Windows machine and i've been sharing the printer on the network with my old iMac 24' which prints perfectly. Now i have the 27' imac and i have no idea why it won't do printing via network, plugging in USB works fine, i've installed the driver but it doesn't look like it did anything. It just worked on my 24' without any hassle, it gets detected in the "Printer Settings" automatically and i dont recall doing anything to get it to work before.
Can anyone give me some tips of why it won't print and what I need to do in order to get network printing to work on my new Mac?
By the way BOTH MACHINE runs SNOW LEOPARD.
Thanks in advance.

Here's the troubleshoot: http://support.apple.com/kb/HT1404
And here is the manual method: http://support.apple.com/kb/HT3049
Hope this helps!

How to Get Default Printer from ITS

Hi all,
I want to get the default printer name when i run application thru ITS ..
I have function module RSPO_FRONTEND_PRINTERS_FOR_DEV which shows the default printer available in the system but it is in SAPGUI and which dont work for ITS applications.
Does any body knows the function which brings Default printer in ITS . I appreciate your answers . I Appreciate your responses.
Thanks
Pradeep Reddy

With PrintGetPrinters(), I can get all printer in the list. If it is a bug, where to get the patch for 11.5?
My pb build is 11.5.1 4608.
Also, another alternative solution to get default printer with pb 11.5.1?
Another is: is Pb 11 and Pb 12 can be installed on windows XP side by side?

How to get hp printer to print in color

how do i get my hp photosmart c4795 to print in color from my mac book pro ?

When you press COMMAND P do you get this window? You can select color there.

How to get Canon Printer to work wired?

I have a canon wireless printer. I just got a cable for it as i want to not use wifi to print from my computer.
How do i get my Canon printer to work with the cable in it.
computer is a IMAc
printer canon MP560 colour
I have cable in it now. How do i get it to work wired to computer? thanks

System Preferences - Printing & Scanning highlight your printer and right click and choose Reset Printing System. Next turn off the printer, then restart the computer in Safe Mode which will clear some caches. To restart in Safe Mode, simply hold down the Shift Key when you hear the startup tone until a progress bar appears. Then shut down the computer, connect the USB cable from the printer to the computer and start the compute normally, then turn on the printer and your iMac should find it. If your computer does not find the printer follow Apple's instructions for doing so.

How to get a Printer Claim. Code for OfficeJet 8500a 909g AIO series.

I tried following the instructions by attempting to use Option 2, BUT there is NO WEb Services option in the SETUP menu. How do I go about getting the Claim Code OR get the Web. Service Information that has the information that I need to register my device with Eprint under " add a device.." I would appreciate help here as I am unable to link my Apple mobile devices to the 8500a 909g AIO printer. Thank you.

Spinflop,
Your printer the 909g does not support web services. From your discription of the printer you have the Officejet 8500 not the 8500a. However here is a document that should help you print to the printer from your mobile device
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02775166&lc=en&product=3752459&tmp...
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

How to get P1102w printing wirelessly

I have given up trying to get my LaserJet P1102w to print wirelessly. I have tried hours and hours of troubleshooting and resintalling.
I just shared it and will print that way.
How do I turn off the wireless functionality? I can log into the web interface with the wired desktop, but I can't find what setting I can turn off.
EDIT: I saw online a reference to directions to simply press the wireless button. I did that, but then printed a configuration page, which still gave the printer an IP that was not 0.0.0.0, so I can only assume that this printer is still broadcasting a wireless signal.
This question was solved.
View Solution.

Hi paulri,
That is great. I am sure we will be able to get you up and running over the wireless network in no time.
I would reset the printer first to clear out any previous network settings.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IP address are cleared.
Printing a Configuration Page.
Verify your Encryption and Password for your network.
How to find your wireless network password.
Connect the USB cable from the printer to the computer, if it isn't already.
Then run the Wireless configuration to setup the printer on the network again.
Go to Start, All Programs, HP, HP Laserjet P1102w, then select Wireless Configuration.
(if the software isn't listed, run the CD for the printer to install the printer software as a USB connection)
Run through the steps to configure the wireless.
Then disconnect the USB cable.
Test the printer over the wireless network.
If you have any issues, please print off another Configuration Page with the IPv4 address and let me know if it lists your network name. (SSID)
Here is a document for setting up Airprint and ePrint if you would also like to use it in the future.
Printing from an Apple Mobile Device.
Please let me know the results.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I need to know how to get my printer to send copies to the computer

can't get printer to send info orcopies to computer for or to send email

Hello @edcode2 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're having issues scanning. I would like to help!
Before we get started, are you looking to make a copy and sent it to the computer to view as a file?
What printer are you using?
I'm including a document that might help:
How Do I Find My Model Number or Product Number?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

How to get Mavericks Printer/Scanner to recognize Canoscan Lide 500F

I have a Canon Canoscan Lide 500 F scanner that worked perfectly with OSX 10.7.5 but Mavericks says it isn't connected? How do you get Mavericks to recognize USB devices that are connected? How do I get this scanner working again?

Hi ..
According to Canon there are no drivers for youur printer/scanner for v10.9 Mavericks compatibility here.
But there is an alternative. You can scan using the pre installed Image Capture app located in your Applications folder.
Connect the scanner to your Mac whether Wi-Fi or USB.
Click the very small black box bottom left side of the Image Capture window.
You'll see this pop up menu: Connecting this (device) opens:
You can select a default app to scan (Image Capture) and select a folder from the Import To pop up menu on the right to save scanned files to.
If you need help with the Image Capture software, click Help from the Image Capture menu bar.
More help here > Mac Basics: Using a scanner

HT4623 I have print options on my Mac but can't get the same on my iPad. I have the newest install of 6.0.1 any other suggestions on how to get the printer to work?

I have all the current installations according to my update tab. How do I get AirPrint?

Do you have an AirPrint printer connected to your network? See here: http://support.apple.com/kb/HT4356

How to get the print logs to appear in the application logs folder of windows server 2008 r2

Dear All,
I am a SIEM professional at an IT firm. i am facing a problem. My SIEM solution has an agent for windows. this agent reads only logs from the application, security and system folder of windows event viewer. In server 2008 r2 the printer logs are clustered
in and application and services/microsoft/windows/print services folder. The requirement of my management is that the siem solution should also be able to montior compliance of print policies. that can only be done once the the print logs are viewable in any
of the three event vieweer folders i.e application, system.security. how can i configure windows to make its print logs visible in any of these three folders ?

this may be helpful...
http://social.technet.microsoft.com/Forums/windowsserver/en-US/fe8892cc-fb6d-49c7-8b2d-c1f17df8e085/2008-r2-use-advanced-security-audit-policy-to-log-print-jobs?forum=winserverprint
or post here...
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverprint
Best,
Howtoto

How to get booklet printing?

Similar Messages

Maybe you are looking for