How to get bootcamp to install from USB on Mid 2010 Macbook Pro in Mavericks

Question

Ok, finally ran into my first problem with Mavericks. It's a doozy. Please if anyone has any advice, let me know.
My bootcamp partition was acting a little buggy. I also wanted to make the partition larger, so I went ahead and erased it, made a larger partition and was getting ready to install windows 7.
Unfortunately, little to my knowledge, bootcamp assistant is programmed to not allow installation of Windows via USB if your computer had an optical drive in it's factory delivered form.
I have removed my optical drive in favor of a second hard drive and encased my original superdrive into an External USB hub.
There apparently used to be a solution involving editing the plist.info text document to allow USB installation. However, as of MAVERICKS, this document is now locked and unable to be edited.
I was running windows 7 fine until I scrapped it, and now I have no way to re-install windows short of going through a laborious process of re-installing my optical drive into my laptop, installing, and then re-installing my hard drive back in. The only reason is due to a software bias for my series of laptop because it "used to have" an optical drive.
Does anyone know of any way that I can bypass this issue to get Windows Re-installed to a bootcamp partition on a mid-2010 macbook pro without using the optical drive?
Thanks in advance!

Answer 1

Remove the Boot Camp partition only with Boot Camp Assistant, not with Disk Utility.
Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
  1. Select Disk Utility from the main menu and click on the Continue button.
  2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
  3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
  4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.