How to get BP number having SAP User ID .?

HI all,
How to get BP number of a user having his SAP User ID .?
Help reg this.

hi check this...
In SUS Link between registered User ID and Business Partner (Vendor) Number
Assign User to Business Partner
regards,
venkat .

Similar Messages

How to get Maximum Number of Concurrent users for last few days?

Hi,
How I can get maximum number of concurrent users which were logged in to the system (ECC 5.0) I mean I want to check the hostory for last few weeks. Is there any way to get the same? I know that I can get Cumulative number of users in st03 under Expert mode but that is the number of users logged into the system during the day. Is there any place where SAP maintians the High Watermark of Number of concurrent users reached in the system?
Thanks in advance...
Regards,
Pravin

Sorry I really missed that I have posted a question here on sdn. I wanted to know this for planning the system hardware requirements. Activities like PM ( Performance Management ) happens once a year and during that activity we see heavy user loan on the system so if I have the exact stats of 1 or 2 years data I can size the system better next time. Fortunately last 2 years PM was very smooth for us. In that look for the improvement because each time we had little extra Harware. By doing the exact analysis we can save a Cost of ownership...
I was looking for R/3 users. I could see the number in st07 but I want to know the exact number at particular time.. I believe that st07 stores only for few days.
Thanks
Pravin

How to get personnel number of the user in the wd java code in Leave reques

Hi all,
we are using the standard Leave Request Applicatin ESS.
can any one please tell me how to get the personnel number of the user in the WD java code?
cause i have pass the pernr number to a bapi and get the details.
please help me its urgent.
thanks in advance.

Hi Madhu,
Create a model for the particular bapi in wd java and acess it in your component. Then pernr parameter will be available in the context and u can pass value for the parameter (pernr) to the model and get the output.
If you hav any doubt, please let me know.
Regards,
Jithin

How to get a formula from the user from a text box in a webpage

Hi. I would like to know how to get the formula from the user who enters in a textbox. This formula can have any number of variables starting with a and goes on.
The complexity of the formula can go upto sin, cos, ln, exp. Also user enters the minimum and maximum values of these variables. Based on a specific algorithm (which I use) I would calculate a *set of values, say 10, for each of these variables, substitute in the formula and based on the result of this formula, I select ONE suitable value for each of the variables.
I don't know how to get this formula (which most likely to be different each time) and substitute the values *which I found earlier.
Kindly help me out in this issue.
Thanks

The textbox is the easy part. It's no different than getting a String parameter out of an HTTP request.
The hard part is parsing the String into a "formula" for evaluation. You'll have to write a parser or find one.
Google for "Java math expression parser" and see what you get.
Or write your own with JavaCC.
%

How to get the last page SAP Script form

How to get the last page SAP Script form.
I want to print a specific information in the last page of SAP form (Script). Please tell me how to get the last page number.
Regards

Hi
You have to check the system variable &NEXTPAGE&, if it's 0 it means you're in the last page.
From SAP Help:
This symbol is used to print the number of the following page. The output format is the same as with &PAGE& .
Note that on the last page of the output, in each window that is not of type MAIN, &NEXTPAGE& has the value 0.
/: IF &NEXTPAGE& = '0'
Last page
/: ENDIF
Max

How to get row number of selected entry from OVS search result

Hi,
Anyone having any idea on how to get row number of the selected entry/ how to differentiate rows in OVS search result in ON_OVS method?
Regards,
Jatin

Hi,
You can get the selected record to <ls_selection> structure in co phase 3.
From that structure you can get what ever field you want.,
check the below code for reference,
<< Moderator message - Cut and paste response from F4 help for ALV table field removed. Plagiarism is not allowed in SCN >>
hope this helps u.,
Thanks & Regards,
Kiran
Edited by: Rob Burbank on Jan 5, 2012 5:24 PM

How to view po number in sap into t -code f.13

how to view po number in sap into t -code f.13

Hi,
You will able to see under Purchasing Doc Field when you execute F.13 (Actually this program will match the parameters with PO no only with GR/IR doc to get clear.
Regd,
Khan.

How to get purchasing data from SAP R/3 to OWB (Oracle warehouse builder).

Hi,
My name is Pavan Tata. I work as a SAP BW developer. Here is the situation at my client place. Client decided to retire BW system and wants to replace with OWB(Oracle warehouse). In all this currently we have purhchasing application in BW production system and wants to move this application to OWB for the same type of reporting what they are getting currently.
Here is my question:
How to get purchasing data from SAP R/3 to OWB(Warehouse) with initial full loads and deltas mechanism in the same way as we do in BW.
Please help on this, also send me any documentation about this if you have.
Thanks,
Pavan.

Hello,
here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
Regards
Walter Habich
REPORT habitest2 LINE-SIZE 255.
TYPES:
strtab_t TYPE TABLE OF string.
CONSTANTS:
separator VALUE ';'.
DATA:
it_s012 LIKE s012 OCCURS 0,
wa_s012 LIKE s012,
strtab TYPE strtab_t,
strele TYPE string.
SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
PERFORM data_to_string
TABLES
 strtab
USING
 'S012'. "requires it_s012 and wa_s012
LOOP AT strtab INTO strele.
WRITE: / strele.
ENDLOOP.
*& Form data_to_string
FORM data_to_string TABLES strtab TYPE strtab_t
 USING ittab TYPE any.
DATA:
 h_zaehler TYPE i,
 line_str TYPE string,
 l_tabellenname(10) TYPE c,
 l_arbeitsbereichsname(10) TYPE c,
 h_string TYPE string,
 h_char(255) TYPE c.
FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
 <l_arbeits> TYPE ANY,
 <feldzeiger> TYPE ANY.
CLEAR strtab.
CONCATENATE 'IT_' ittab INTO l_tabellenname.
ASSIGN (l_tabellenname) TO <l_tabelle>.
CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
LOOP AT <l_tabelle> INTO <l_arbeits>.
 CLEAR: h_zaehler, line_str.
 line_str = ittab.
 DO.
 ADD 1 TO h_zaehler.
 ASSIGN COMPONENT h_zaehler OF
 STRUCTURE <l_arbeits> TO <feldzeiger>.
 IF sy-subrc <> 0. EXIT. ENDIF.
 WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED. "#EC *
 h_string = h_char.
 CONCATENATE line_str separator h_string INTO line_str.
 ENDDO.
 APPEND line_str TO strtab.
ENDLOOP.
ENDFORM. "data_to_string

How to get week number from date

Hi,
please mention how to get the number of week from a particular date using fn module?

Hi Debarshi,
Use FM DATE_GET_WEEK
Reward points if helpful.
Regards,
Hemant

How to get total number of days

Hi All,
how to get total number of days , for example if month eq 05 then need to get total number of days until MAY 31.
and how to get total number of days in a month.
Thank You,,
Sriii..

Hi Sridhar,
Pls Try to search before posting general questions.
Try this,
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis                   = p_lv_date1
      i_datum_von                   = p_lv_date2
   IMPORTING
     e_tage                        = p_e_date_difference
   EXCEPTIONS
     days_method_not_defined       = 1
     OTHERS                        = 2
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards,
Sunil kairam.

Indesign CS3: How to get the number of the current layer?

Hallo!
How to get the number of the current layer in a page?
Thanks,
Alois Blaimer

InterfacePtr<ILayerList> layerList(documentUIDRef, UseDefaultIID()); int32 layerCount = layerList->GetCount(); To findout layer name use IDocumentLayer* documentLayer = layerList->QueryLayer(layerIndex); PMString layer=documentLayer->GetName();

How to get physical number of selected row on the screen.

Hi,
We have block defined with Numbers of Records Displayed = 3. In the same time the data set contains 10 records. We would like to know how to get a number of row selected on the screen. i.e. in our case that the number will be always between 1 and 3 independent of the current row position in the data set.
Best regards,
Constantin.

You can calculate that number by subtracting :SYSTEM.CURSOR_RECORD and GET_BLOCK_PROPERTY('BLOCK', TOPMOST_RECORD)

How to get rid of the SAP BPC "three globes" startup screen?

Hi,
I am trying to figure out how to get rid of the SAP BPC "three globes" startup screen when we start BPC. I do not want it to pop up.
I looked at VBA behind the workbooks but could not find anything. Could not make the sheet invisible.
Is there a way to get rid of the screen? This is the screenshot
www.flickr.com/photos/chalinka/3471310254/
Thanks!

Just found the answer on this very forum!
Re: How to change the logo, (3 Globes) on the launch page
Posted: Mar 18, 2009 12:46 PM in response to: David Fletcher Reply
OK then, now v7sp03 for microsoft has hit the shelves, you can change the logo !!!
It is quite easy.
Have the logo file ready in either BMP, GIF or JPG format.
Put it in your "Server Install -> DataWebFolders[Appset]" folder (so where you keep your files).
In ApplicationSet parameters, add the parameter COMPANY_LOGO and in the options type the name of the file you just put on the server.
Now if you restart BPC for Excel, the second excel page that pops up should be showing your new logo or graphic (mine did).
The use of the logo has been documented in the admin manual -> working with appset parameters
Some tips.
I wanted not to clutter the filesystem so i put my logo in the appsetpublications folder and added the path accordingly in the parameter (so now it reads appsetpublicationslogoname.jpg instead of just logoname.jpg).
If you do not supply a name (only the parameter), your second Excel window (normally holding the graphic) will not appear. That could be an alternative too if you find that whole thing annoying.
Hope this helps you build great BPC apps,
Edwin van Geel

How to get the number of columns in a result set???

hi everyone..
i am trying to establish a servlet applet communication....
my applet send the sql query to the servlet as serialised string and then the servlet executes the query...
Since i need to pass the result back to the applet, i thaught of passing the whole reult set to the applet..but that seems to be not possible..
so i thaught of storing my result set data in a vector and then pass the vector,but the first problem that i came across is that how to get the number of colums in a result set....
so is there a way to get the number of columns in a result set...???
and also i would like to know if it possible to send my whole result set to the applet bye serialization or by any method...???
thanx in advance

You shouldn't do. It expenses resources (you should always close the ResultSet and the Statement as fast as possible). Simply gently process it into a Collection or Map of DTO's. Those are serializable.

How to get paragraph number of selected text in ID CS4

Hi,
Can anybody help me how to get paragraph number of selected text in Indesign cs4.
Thanks,
Gopal

Ah, I see -- thanks. Turns out that there's no difference in speed between texts.itemByRange(), characters.itemByRange(),and insertionPoints.itemByRange(). In a document with 170 pages of text, and with the cursor in the last paragraph, the second and third lines, below (and your function), give exactly the same result:
t = app.selection[0];
t.parentStory.texts.itemByRange (t.parentStory.insertionPoints[0], t).paragraphs.length;
t.parentStory.characters.itemByRange (t.parentStory.characters[0], t).paragraphs.length;
Peter

How to get BP number having SAP User ID .?

Similar Messages

Maybe you are looking for