How to get BU, Company, Group details with the help of Employee number

Hi Friends,
How to get information related with Employee like Business unit, Company, Business Group and other details.
Pravin

Yes Arul.
I want to get these information in a custom Java webdynpro application but if you can guide me how to get these values in SAP-Hr. Can you just give me details of tables. I have Employee number(pernr) with me and want to fetch Group, Company, Business Unit.
With rgds,
Pravin

Similar Messages

  • How to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

    how to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

    You can use third party software True Last Logon 2.9.You can export the file in excel for report creation.You can use the trial version this will achieve what you are looking for.
    True Last Logon displays the following Active Directory information:
    --Users real name and logon name
    --Detailed account status
    --Last Logon Date & Time
    --Last Logon Timestamp (Replicated value)
    --Account Expiry Date & Time
    --Enabled or Disabled Account
    --Locked Accounts
    --Password Expires
    --Password Last Set Date & Time
    --Logon Count
    --Bad Password Count
    --Expiry Date
    --You can also query for any other attribute (Example: Description, telephone Number, custom attibutes etc)
    Refer the below link for trial version:
    http://www.dovestones.com/products/True_Last_Logon.asp
    Best Regards,
    Sandesh Dubey.
    MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
    My Blog
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • How to get online apps to work with the Verizon DSL modem firewall set at "Medium" level, not "Low?"

    How to get online apps to work with the Verizon DSL modem firewall set at “Medium” level? Xbox 360 Live, FTP, and the Windows sntp Time checker native to Windows XP WON’T WORK unless the Verizon firewall is first reset down to “Low.” Then all works well, but I then risk low firewall protection. Setup: · Westell 6100 DSL modem (Software Version: VER:4.04.03.00 Transceiver Revision: 7.2.3.0 Model Name: C90-610015-06), · D-Link DIR-655 wireless router (Hardware Version: A3, Firmware Version: 1.21), For Xbox 360 Live the “canned” port forwarding rule for provided in Verizon’s drop-down list for the Westell 6100 modem forwards ports 88 and 3074 for both TCP and UDP. This does not meet Microsoft’s forwarding recommendations for Xbox 360 Live stated at http://support.microsoft.com/kb/908874. Instead, for the Verizon modem (Westell) I made a new port forwarding rule to comply with those Microsoft instructions. It forwards ports 53, 80 and 3074 for TCP and ports 53, 88 and 3074 for UDP. These same ports are also forwarded in the D-Link router configuration. For FTP, port 21 is also forwarded for TCP and UDP in both modem and router. But they don’t work until I first cripple the Verizon firewall down to “Low.” How to get them to work with the Verizon firewall up to Medium?

    While I do not know the answer to your question, BUT since you have this modem and another router - you could just follow.
    http://www.dslreports.com/faq/13600
    ^^
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • How to get my custom controller updated with the global custom controller?

    Hi all,
    I'm new to CRM Web UI and need some advice from the expert. Currently I'm working on component ICCMP_BT_DATES and noticed something weird with this component. When this component is first launch it display the dates of a service ticket correctly. However when I navigate to another screen, save a new ticket and back, the dates are not reflected. When I went in and debug the component, I noticed that the context is still tied to the previous ticket. I think the custom controller is not updated with the latest from the global custom controller.
    My question is how do I get my custom controller updated with the latest.
    Regards,
    Ricky

    You have to bind your custom controllers context node to the event NEW_FOCUS of the collection wrapper on the global custom controller.
    Best place to do this might be the CONNECT_NODES of the context of your custom controller.
    Get the global CuCo with GET_CUSTOM_CONTROLLER() and then the appropriate context node. Now:
    SET HANDLER yourMethod for lr_global_cuco->typed_context->thecontextnode->collection_wrapper activation iv_activate.
    Of course you have to implement a method similar to ON_NEW_FOCUS as it is on many other nodes.
    cheers Carsten

  • Getting all types of files with the help of get_file_name function

    hi all,
    i am using Forms [32 Bit] Version 6.0.8.24.1 (Production).
    i have used get_file_name function to the file name of all type of files
    but i am able to get only the folders when i tried like below
    :FILE_NAME := GET_FILE_NAME(NULL,NULL,NULL,'Choose a Directory',OPEN_FILE,FALSE);my requirement to get all types of files on the window(user will selects whichever way he wants)
    Can i acheive it through get_file_name or i have to go for any alternative to get the file list, so that user can select by browsing the folders.
    Please help.
    Thanks..

    hi,
    in my code the select file was set to false(so showing only the directories) now i have set it to 'true'. its showing the files now.
    with the help of my above shown code i can get the full path of the file.
    is there any way to get only the file name?(other than the last occurance of '/' logic or that is only the way?)
    Please help.
    Thanks..

  • How to get my Addon to work with the license key?

    Hi,
    Can someone tell me how to get the Addon to work with the license key?
    I've follow the steps as stated in this thread:
    [Re: SBO 2005 A - How do I get a Connection string from SAP B1.|Re: SBO 2005 A - How do I get a Connection string from SAP B1.]
    1) i've registered a BASIS key and get a 'BASISXXXXXX" string
    2) then i paste my BASIS key in "Solution" of Add-On Indentifier Generator and generate the  Add-On Indentifier Code
    3) then i paste the string to my source code
    which is the "XXX" of the sample code in that thread.
    static string AddonIdentifierString="XXX";
    int lRetCode=0;
    int errCode=0;
    string errMsg= string.Empty;
    string connectionStr ="";
    link = new SAPbouiCOM.SboGuiApiClass();
    connectionStr =Environment.GetCommandLineArgs().GetValue(1).ToString();
    link.AddonIdentifier=AddonIdentifierString;
    link.Connect(connectionStr);
    oApp = link.GetApplication(-1);
    vCompany = new SAPbobsCOM.CompanyClass();
    string cookie = vCompany.GetContextCookie();
    string conStr = oApp.Company.GetConnectionContext(cookie);
    vCompany.SetSboLoginContext(conStr);
    lRetCode = vCompany.Connect();
    4) then i add my add-on using manager role at Add-on admin
    5) then i can see my add-on there. it not suppose to be there since i've not installed any of my add-on license for my own add-on.
    what steps did i miss? Can someone please advise? Thanks
    ps : i'm coding in VB

    Hi,
    i think you have to change the license file attributing the number of licensing for your addon, then download it from https://websmp202.sap-ag.de/smb and then install it on SAP License manager, then I think you should give the license for your addon for individual users (example manager)
    I hope it helps.
    Best regards

  • How to get custom graphics to work with the animator object

    I Have a costom graphic that I wish to have change color depending the position of a Pot, and have tried using the animator object. However the animator object fails to change color when the pot is moved, when i replace the costom graphic with a standard one (a pipe) the color changes perfectly. The costom graphic is in wmf format so it should work. what am i doing wrong or is this just not possible?

    Hello,
    That's a little odd. Did you trying playing with the Gray Proximity settings? If it's not too difficult maybe you can create various colored versions of your graphic and use the Multistate object instead.
    Is it possible to post the picture here so we can try?
    Regards,
    Khalid

  • How to validate enries in Maintenance Views with the help of Events?

    Hello,
    I have a Maint. View. I would like to apply a validation for a specific field of the table. And if there is an entry which is not proper, than I'd need an error message to be issue, and the fields should be open for correction.
    I know this should be managed by Events. I tried many of them, but there was allways some different kind of issuses. E.g. When I used Event 21, the problem was that:  table "total" was not updated with the values I entered, when the Event triggered. More over, when I ussed a simple error message, that appeared on the screen, but when I hit Enter, I got an infinite LOOP, cause Event 21 was again triggered.
    When I tried Event 01, the total table was already updated. But with the program went back to the sceen from where I called the maintenance of the table. And Issues the error message there. When I hit Enter it took me back to maintenance screen. But this is not very nice.
    A bunch of hints would make me very happy, or a good example, which is priceless!
    Thanks and regards,
    Gyula

    Hi priyaranjan,
    Check the data in debug mode whether the record_tab is getting filled or not. If it is not filled use FM 'F4UT_RESULTS_MAP' to fill the data.
    Refer the link F4UT_RESULTS_MAP Standard Search Help Exit for Filling Hit List - Function - ABAP - SAP to know how to use FM.
    Once You get result from FM in to record_tab then sort the table as per your requirement.
    Regards,
    Ravikiran.K

  • How to add files to xcode project with the help of applescript

    i am tried but got some of the error which is enable to solve by myself becuase i am new in applescripting
    tell application "Xcode"
    open "Macintosh HD:Users:Nitesh:Desktop:sumeet:RND:iPhone:iPhone_V2_Ref_2.5.01:iPhone_V2.xcodep roj"
              tell project "iPhone_V2"
                        set resourcepath to "/Users/Nitesh/Desktop/sumeet/RND/images" (*full path of my folder that i want to add*)
    set filelist to {}
                        tell application "Finder"
                                  set filelist to (name of items of (POSIX file resourcepath as alias))
                        end tell
                        tell group "images" of root group
                                  repeat with i in filelist
                                            set filepath to resourcepath & (contents of i)
                                            set myfile to make new file reference with properties {namecontents of i), full path:filepath}
                                            add myfile to first target of front project
                                  end repeat
                        end tell
              end tell
    end tell
    the issues is:
    error "Xcode got an error: Can’t get group \"images\" of root group of project \"iPhone_V2\"." number -1728 from group "images" of root group of project "iPhone_V2"

    Applescript for this issue is more simple . Try to use my script that is here

  • Getting an error while validating with the help of domain

    This is strange. I am validating an email address column in employees table by creating a domain and then associating it with the email column in the table. This is the code
        protected void validate() {
            //  ### Implement custom domain validation logic here. ###
            int atpos = mData.indexOf('@');
            int dotpos = mData.lastIndexOf('.');
            if (atpos > -1 || dotpos > -1) {
                throw new DataCreationException(null, "Invalid Email Address", null);
        }But while committing records, I am receiving the following error:
    Cannot convert testmailid of type class java.lang.String to class model.common.DomainEmail
    Can anyone help me?
    Oh yes, I am using JDev 11.1.2.3

    I suspect that you are using an <af:inputText> with no converter for entering the email on the page. The purpose of a converter would be to convert the String value entered by the user in the field to another datatype (e.g. to model.common.DomainEmail type) which is expected by the model layer (e.g. by the target VO attribute). If there is no such converter, JSF does not perform any datatype conversion and it tries to assign the java.lang.String value to the VO attribute (which is of model.common.DomainEmail datatype), so a type casting error occurs. If that is the case, then you should implement and attach a proper JSF converter to the <af:inputText> component.
    Dimitar

  • How to get most recent consecutive records with the same value

    Hi,
    Can someone please help me to solve my problem?
    Below is my table
    Prod_Code-----Purchase_date---Inv_number-------Inv_amt
    MS_AV16850------18/01/2005-----------6575947----------------7.93
    MS_AV16850------22/07/2005-----------7034012----------------51.82
    MS_AV16850------04/01/2006-----------8719618----------------51.82
    MS_AV16850------20/06/2006-----------9515864----------------104.69
    MS_AV16850------16/04/2007-----------10353759----------------189.29
    MS_AV16850------30/05/2007-----------10689899----------------189.29
    MS_AV16850------06/01/2008-----------1653821----------------65.49
    MS_AV16850------22/02/2009-----------10866311----------------189.29
    I want my query to show the rows that has most recent purchase dates with same amount in consecutive purchase date.
    So from the table above, the query should display:
    Prod_Code-----Purchase_date---Inv_number-------Inv_amt
    MS_AV16850------16/04/2007-----------10353759----------------189.29
    MS_AV16850------30/05/2007-----------10689899----------------189.29
    It should not get
    MS_AV16850------16/04/2007-----------10353759----------------189.29
    MS_AV16850------30/05/2007-----------10689899----------------189.29
    MS_AV16850------22/02/2009-----------10866311----------------189.29
    because inv_number 10866311 has a prvevious inv_amount of 65.49.
    and not get this
    MS_AV16850------22/07/2005-----------7034012----------------51.82
    MS_AV16850------04/01/2006-----------8719618----------------51.82
    because they are not the most recent purchase date even if they have the same inv_amount.
    Thanks in advance.

    Hi,
    You're right; thanks for catching my mistake.
    I changed the WHERE clause of the main query (including subquery there) to deal with that situation:
    WITH     got_grp          AS
         SELECT      x.*
         ,      ROW_NUMBER () OVER ( ORDER BY      purchase_date )
                - ROW_NUMBER () OVER ( PARTITION BY  inv_amt
                                             ORDER BY         purchase_date )     AS grp
    --     ,      ROW_NUMBER () OVER ( ORDER BY      purchase_date )     AS r1
    --     ,        ROW_NUMBER () OVER ( PARTITION BY  inv_amt
    --                                         ORDER BY         purchase_date )     AS r2
         FROM     table_x     x
    SELECT     *     -- Or list all columns except grp
    FROM     got_grp
    WHERE     (inv_amt, grp)  IN  (
                               SELECT    MAX (inv_amt) KEEP (DENSE_RANK LAST ORDER BY MAX (purchase_date))
                        ,       MAX (MAX (grp))
                                FROM      got_grp
                                GROUP BY  grp
                                ,       inv_amt
                                HAVING    COUNT (*)     > 1
    ;Thanks, too, for posting the sample data. Apparantly, you're more interested in solving this problem than OP is.
    Edited by: Frank Kulash on Nov 22, 2010 1:36 PM
    The r1 and r2 columns are not needed for the solution. You may want to display them, just to help see how the query works.

  • Update to kichat: FAQ 2 - How to get my router to work with iChat?

    kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
    (Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
    Getting your router started with iChat.
    Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
    Glossary for this FAQ
    Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
    Routers seem to fall into two categories
    Those that work straight from the box. See Apple Article HT1787
    NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
    Even then some list that they need tweaks.
    and those that do not.
    This post will deal with what you may need to look at.
    First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
    Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
    In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
    Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
    Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
    The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
    Opening or Allowing ports. Several Methods not all devices have all of them.
    DMZ (Demilitarised Zone)
    This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
    Port Forwarding (also Virtual Server or Pin Holes)
    These settings are usually found in an Advanced setting.
    You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
    See this pic for an example of the description above.
    In this example shows that on some Port AND Protocols need to be listed.
    iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
    See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
    My Note 2:
    On the first link Note 1 under tables in that link would be better if it read:
    " 1. All iChat AV traffic is UDP -
    except for ports 5190 and 5298, which need to be open for both TCP as well;
    and 5220, 5222, which need to be open for TCP only. "
    Note 2
    GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
    UPnP Universal Plug n Play.
    This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
    By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
    They close after the application has finished with them on a timed basis.
    On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
    Trigger Ports
    Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
    The first port for incoming Video or Audio invites is port 5678.
    Pre iChat 4
    When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
    See this variation where only the ports listed above are completed.
    The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
    iChat 4
    The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
    At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
    Wireless
    Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
    Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
    Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
    Multiple devices
    Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
    Further Help
    I have found that this site (ADSLGuide) to be helpful.
    It is British based but I have linked you to the Apple Related Discussions Forum.
    Eliminating Problems on my Personal web pages.
    The ports and their function within iChat. (my personal Web pages again)
    This is not a step by step approach. You will have to read around the information about your device.
    Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
    Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
    Click on your device.
    Select iChat on the next page.
    Follow the info on the next.
    This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
    Gives you a chance to look at at pics to give clues to where some of these other things are.
    With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
    and to EZ Jim for his work on iSights on my web pages.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    9:51 PM Saturday; December 6, 2008

    kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
    (Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
    Getting your router started with iChat.
    Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
    Glossary for this FAQ
    Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
    Routers seem to fall into two categories
    Those that work straight from the box. See Apple Article HT1787
    NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
    Even then some list that they need tweaks.
    and those that do not.
    This post will deal with what you may need to look at.
    First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
    Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
    In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
    Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
    Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
    The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
    Opening or Allowing ports. Several Methods not all devices have all of them.
    DMZ (Demilitarised Zone)
    This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
    Port Forwarding (also Virtual Server or Pin Holes)
    These settings are usually found in an Advanced setting.
    You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
    See this pic for an example of the description above.
    In this example shows that on some Port AND Protocols need to be listed.
    iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
    See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
    My Note 2:
    On the first link Note 1 under tables in that link would be better if it read:
    " 1. All iChat AV traffic is UDP -
    except for ports 5190 and 5298, which need to be open for both TCP as well;
    and 5220, 5222, which need to be open for TCP only. "
    Note 2
    GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
    UPnP Universal Plug n Play.
    This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
    By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
    They close after the application has finished with them on a timed basis.
    On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
    Trigger Ports
    Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
    The first port for incoming Video or Audio invites is port 5678.
    Pre iChat 4
    When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
    See this variation where only the ports listed above are completed.
    The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
    iChat 4
    The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
    At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
    Wireless
    Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
    Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
    Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
    Multiple devices
    Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
    Further Help
    I have found that this site (ADSLGuide) to be helpful.
    It is British based but I have linked you to the Apple Related Discussions Forum.
    Eliminating Problems on my Personal web pages.
    The ports and their function within iChat. (my personal Web pages again)
    This is not a step by step approach. You will have to read around the information about your device.
    Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
    Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
    Click on your device.
    Select iChat on the next page.
    Follow the info on the next.
    This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
    Gives you a chance to look at at pics to give clues to where some of these other things are.
    With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
    and to EZ Jim for his work on iSights on my web pages.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    9:51 PM Saturday; December 6, 2008

  • Urgent : how I get tree type group total result

    hi master
    sir now system give me this type for result
    PARENT ACCID DRBAL CRBAL
    K1
    K11
    11 K1101 46291132
    11 K1102 13182173
    11 K1103 23784045
    11 K1104
    11 K1105
    11 K1106
    11 K1107 10001795
    11 K1108 9083529
    11 K1109
    11 K1110 4224350
    11 K1111
    11 K1112 6696832
    11 K1113 7963381
    11 K1114 742766
    1 K12
    12 K1201 1486082
    12 K1202
    12 K1203
    1 K13
    13 K1301
    1301 K130101
    1301 K130102
    1301 K130103
    1301 K130104 1977616
    1301 K130105
    1301 K130106 736266
    1301 K130107 396673
    1301 K130108 42751
    1301 K130109 298362
    1301 K130110 187696
    1301 K130111 537
    1301 K130112 942
    1301 K130113 987
    1301 K130114 1272
    1301 K130115 40000
    13 K1302
    1302 K130201
    1302 K130202
    1302 K130203
    1302 K130204
    1302 K130205 259941
    13 K1303
    1303 K130301
    1303 K130302
    1303 K130303 177716
    13 K1304
    1304 K130401
    1304 K130402
    1304 K130403
    1304 K130404
    1304 K130405
    1304 K130406 809719
    1304 K130407
    1304 K130408 1786091
    13 K1305
    1305 K130501
    1305 K130502
    13 K1306
    1306 K130601
    13 K1311
    1311 K131101 788780
    K2
    2 K21
    21 K2101
    2101 K210101
    2101 K210104
    21 K2102
    2102 K210201
    2102 K210202
    22 K2205
    2205 K220501
    2205 K220502
    220502 K22050201
    220502 K22050202
    220502 K22050203
    220502 K22050204
    22 K2206
    2206 K220601
    2206 K220602
    but sir i need this type of result
    PARENT ACCID DRBAL CRBAL
    GROUP NAME K1
    GROUP NAME K11
    11 K1101 46291132
    11 K1102 13182173
    11 K1103 23784045
    11 K1104
    11 K1105
    11 K1106
    11 K1107 10001795
    11 K1108 9083529
    11 K1109
    11 K1110 4224350
    11 K1111
    11 K1112 6696832
    11 K1113 7963381
    11 K1114 742766
    TOTAL
    1 K12
    TOTAL
    GROUP NAME
    12 K1201 1486082
    12 K1202
    12 K1203
    TOTAL
    1 K13
    13 K1301
    1301 K130101
    1301 K130102
    1301 K130103
    1301 K130104 1977616
    1301 K130105
    1301 K130106 736266
    1301 K130107 396673
    1301 K130108 42751
    1301 K130109 298362
    1301 K130110 187696
    1301 K130111 537
    1301 K130112 942
    1301 K130113 987
    1301 K130114 1272
    1301 K130115 40000
    13 K1302
    1302 K130201
    1302 K130202
    1302 K130203
    1302 K130204
    1302 K130205 259941
    13 K1303
    1303 K130301
    1303 K130302
    1303 K130303 177716
    13 K1304
    1304 K130401
    1304 K130402
    1304 K130403
    1304 K130404
    1304 K130405
    1304 K130406 809719
    1304 K130407
    1304 K130408 1786091
    13 K1305
    1305 K130501
    1305 K130502
    13 K1306
    Sir I need total group by group father group total and child group total
    Please help me how I get tree type group total result

    Hi master
    thankyou for your reply
    Sir,
    i know and you see my working i get code form master table and get detal amount form other table
    I have two table see table
    Acctab               Baltab
    PARENT           PCID
    CHILD           title
    PCID           amount
    I need heretical result use this type of query but not success
    please see my query and give me idea how I get here full tree
    select test.child,test.pcid,baltab.pcid from (select acctab.child,acctab.parent,acctab.pcid
    from acctab
    start with acctab.parent is null
    connect by prior acctab.child= acctab.parent) test,baltab
    where test.pcid=baltab.pcid ;
    CHILD PCID PCID
    1 1 1
    2 2 2
    3 3 3
    11 111 111
    12 112 112
    13 113 113
    21 221 221
    22 222 222
    23 223 223
    31 331 331
    32 332 332
    33 333 333
    but I need this type result
    CHILD PCID
    1 1
    11 111
    12 112
    13 113
    2 2
    21 221
    22 222
    23 223
    3 3
    31 331
    32 332
    33 333

  • How to get our company listed in 'Top Contributing Companies'

    Hi,
    How to get our company listed in 'Top Contributing Companies'?
    Regards,
    Murali.
    Message was edited by: Murali

    Hi,
    It's just a standard footer I'm using, preventing me to look up if a user is already on the map or not.
    The SDN admins are rather busy with TechEd, so ther might be a delay.
    Don't worry you will get your points.
    Eddy
    PS.
    Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
    Spread the wor(l)d!

  • How to get real value from selectOneChoice with javascript?

    Hi,
    How to get real value from selectOneChoice with javascript? The event.getNewValue() only gets me the index of the selected item, not the value/title.
    JSF page:
    <af:resource type="javascript">
    function parseAddress(event)
    alert("new value: " + event.getNewValue());
    </af:resource>
    <af:selectOneChoice label="Location:" value="" id="soc4">
    <af:clientListener type="valueChange" method="parseAddress" />
    <f:selectItems value="#{Person.locations}" id="si7"/>
    </af:selectOneChoice>
    HTML :
    <option title="225 Broadway, New York, NY-10007" selected="" value="0">225 Broadway (Central Office)</option>
    <option title="90 Mark St., New York, NY-10007" value="1">90 Mark St. (Central Office)</option>
    Thanks a lot.

    Something I was missing ,
    You need to add valuePassThru="true" in your <af:selectOneChoice component. I have personally tested it and got the actual value in alert box. I hope this time you got the real solution. You can also test the following code by your end.
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
    xmlns:f="http://java.sun.com/jsf/core"
    xmlns:h="http://java.sun.com/jsf/html"
    xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
    <jsp:directive.page contentType="text/html;charset=UTF-8"/>
    <f:view>
    <af:document id="d1">
    <af:form id="f1">
    <af:panelBox text="PanelBox1" id="pb1">
    <af:selectOneChoice label="Set Log Level" id="soc1"
    value="#{SelectManagedBean.loggerDefault}"
    valuePassThru="true">
    <af:selectItem label="select one" value="First" id="s6"/>
    <af:selectItem label="select two" value="Second" id="s56"/>
    <af:clientListener method="setLogLevel" type="valueChange"/>
    </af:selectOneChoice>
    <af:resource type="javascript">
    function setLogLevel(evt) {
    var selectOneChoice = evt.getSource();
    var logLevel = selectOneChoice.getSubmittedValue();
    // var logLevelObject = AdfLogger.NONE;
    alert("new value is : " + logLevel);
    //alert(evt.getSelection);
    //alert(logLevelObject);
    evt.cancel();
    </af:resource>
    </af:panelBox>
    </af:form>
    </af:document>
    </f:view>
    </jsp:root>

Maybe you are looking for

  • How to get month value from custom calendar without passing parameter from SSRS in MDX query

    Could you please throw some light to achieve below requirement?   I need to filter the data between two periods dynamically . The date calendar here works differently(ex:-Date 26-Aug-2014 will fall in period 7 which is last date and 27-Aug-2014 will

  • Very Weird IOS Bug - iPad and iPhone

    This is a really weird scenario - which I hope someone may shed some light on. I'm building a new website, and there are parts of the website that don't function at all on either my iPhone 5, or iPad 2  - (both on IOS 8.3) , yet when I try the very s

  • Automatic Cancellation Date in Sales Order

    Is there a setting such that when the Cancellation Date in a Sales Order occurs that the Sales Order is cancelled automatically

  • How can I hide "Read/Waiting/Transferring data..." status?

    Firefox 34.0.5 on Windows 7 I want to hide the "Read/Waiting/Transferring data..." status that shows on the lower left of the browser screen I found a solution in this archived thread, https://support.mozilla.org/en-US/questions/942499, and I applied

  • Reg: OSB calling db

    I got requirement in OSB like I need to get the status of credit card.I need to get the status of credit card by connecting the DB but not like using Jdevloper.Is there any way to connect to db directly from OSB and get the result.