How to get bus number and socket number of NI-6143 PCI board using NI-DAQmx?

Hello everybody and Happy New Year!
I assume similar question has already been discussed earlier, here, for example.
My Visual C++ application scans PCI buses and slots to enumerate supported PCI DAQ boards. These boards are produced by different manufacturers, my company and NI, for instance. There is no support of NI-6143 PCI board by Traditional NI-DAQ, so I am using NI-DAQmx 7.2. There is promising function DAQmxGetDeviceAttribute() defined in NIDAQmx.h, but it supports request of DAQmx_Dev_ProductType and DAQmx_Dev_SerialNum device attributes only, for now.
Thus, it's another request to NI-DAQmx development team to improve functionality of the API. Using own lookup tables is not the good way to solve the problem. Good luck!

Hello and Happy New Year to you also!
As you were able to find with the hyperlink included in your post, this is a common question and request from our DAQmx users transitioning from Traditional NI-DAQ. The best thing for you to do at the current time would be to post your discussion thread in a Product Feedback form. This is the media that you will want to use to request features with our products. It is closely monitored by our development teams, so you suggestions will strongly be considered.
Best Regards,
Jared A

Similar Messages

How to get the number of bytes at ethernt port using tcp/ip?

I have data with variable sizes.I am getting the data from another sytem using software C.
How can I get the exact number of bytes coming at the port before using the read command so that the no. of bytes at port has to be given as the input to the tcp read vi?

Philippe_RSA wrote:
So may responses saying your question is wrong..... typical of this site, and no decent answer after 5 years !
The answer I have used is to use a call library function:
short int ioctlsocket(unsigned long socket, unsigned long fionread, unsigned long *len);
where fionread is a windows defined constant = 4004667F
The socket can be obtained from using the TCP Get RAW NET OBJECT.vi which comes with Labview (even as far back as version 7).
Good luck.
A protocol requiring such a hack is IMHO very poorly designed. You should always have some way on the wire to determine the data stream size. If the data is fixed size that would be inherent to the protocol, if it's variable sized there should be a fixed size header or a known message termination indication that can be used to determine how to read the rest of the message.
As a side node, I do consider the existence of VISA Bytes at Serial Port a big error, and that is most likely where this question originally came from. Use of "bytes at port" to decode a protocol will ALWAYS lead to protocol errors sooner or later, and code that is unneccessarily complicated to force the routine to deal with the asynchonous reading of the "bytes at port" into the protocol decoding.
If a protocol can't be decoded with fixed size reads, fixed size reads with following variable size reads determined from information in the header, or a specific message termination indication, then it is very badly flawed.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to get customer number and name from the SD document

Hi All,
Can you please let me know how to get Customer Number and Name from the SD Document?
Thanks a lot....
Anil

Hi,
It will be displayed in the SD (BIlling document) itself, you clikc on the VF03. The customer name and number will also appear in the SO document also Tcode VA03
regards,
radhika
Edited by: kolipara radhika on Jul 10, 2009 5:32 AM

How to get Storage unit and Warehouse number from Handling Unit.

hello all,
I have Handling unit and Material in my program as an input, using these two fields i have to get corresponding storage unit and ware house number, to pick up transfer order.
Can anybody explain me who can we get Storage Unit and Warehouse Number from Handling Unit.
I know we can pull transfer order from table LTAK & LTAP using warehouse number.
But i dont understand how to get warehouse number from handling unit.
There is table LSUTO which has warehouse and Handling unit relation, but in our system there is not data maintained in that table. So, i was just wondering how can i get warehouse number from the given handling unit number.
please guide me
thanks
Edited by: Mr A on May 12, 2008 1:23 AM

Hi ,
Check out the handling unit item table VEPO. You got storage location(LGORT) in it.
Reward points if it was useful.
Regards,
Abhishek

How to get total number of days

Hi All,
how to get total number of days , for example if month eq 05 then need to get total number of days until MAY 31.
and how to get total number of days in a month.
Thank You,,
Sriii..

Hi Sridhar,
Pls Try to search before posting general questions.
Try this,
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis                   = p_lv_date1
      i_datum_von                   = p_lv_date2
   IMPORTING
     e_tage                        = p_e_date_difference
   EXCEPTIONS
     days_method_not_defined       = 1
     OTHERS                        = 2
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards,
Sunil kairam.

How to get physical number of selected row on the screen.

Hi,
We have block defined with Numbers of Records Displayed = 3. In the same time the data set contains 10 records. We would like to know how to get a number of row selected on the screen. i.e. in our case that the number will be always between 1 and 3 independent of the current row position in the data set.
Best regards,
Constantin.

You can calculate that number by subtracting :SYSTEM.CURSOR_RECORD and GET_BLOCK_PROPERTY('BLOCK', TOPMOST_RECORD)

How to get the number of columns in a result set???

hi everyone..
i am trying to establish a servlet applet communication....
my applet send the sql query to the servlet as serialised string and then the servlet executes the query...
Since i need to pass the result back to the applet, i thaught of passing the whole reult set to the applet..but that seems to be not possible..
so i thaught of storing my result set data in a vector and then pass the vector,but the first problem that i came across is that how to get the number of colums in a result set....
so is there a way to get the number of columns in a result set...???
and also i would like to know if it possible to send my whole result set to the applet bye serialization or by any method...???
thanx in advance

You shouldn't do. It expenses resources (you should always close the ResultSet and the Statement as fast as possible). Simply gently process it into a Collection or Map of DTO's. Those are serializable.

How to get row number of selected entry from OVS search result

Hi,
Anyone having any idea on how to get row number of the selected entry/ how to differentiate rows in OVS search result in ON_OVS method?
Regards,
Jatin

Hi,
You can get the selected record to <ls_selection> structure in co phase 3.
From that structure you can get what ever field you want.,
check the below code for reference,
<< Moderator message - Cut and paste response from F4 help for ALV table field removed. Plagiarism is not allowed in SCN >>
hope this helps u.,
Thanks & Regards,
Kiran
Edited by: Rob Burbank on Jan 5, 2012 5:24 PM

How to get paragraph number of selected text in ID CS4

Hi,
Can anybody help me how to get paragraph number of selected text in Indesign cs4.
Thanks,
Gopal

Ah, I see -- thanks. Turns out that there's no difference in speed between texts.itemByRange(), characters.itemByRange(),and insertionPoints.itemByRange(). In a document with 170 pages of text, and with the cursor in the last paragraph, the second and third lines, below (and your function), give exactly the same result:
t = app.selection[0];
t.parentStory.texts.itemByRange (t.parentStory.insertionPoints[0], t).paragraphs.length;
t.parentStory.characters.itemByRange (t.parentStory.characters[0], t).paragraphs.length;
Peter

How to get the number of elements in DB

Could you tell me how to get the number of elements in DB??
My code to get the number is below, but I think it is not efficient
DB->cursor(DB, NULL, &cursorp, 0);
while ((ret = cursorp->c_get(cursorp, &key, &data, DB_NEXT)) == 0)
count++;
--------------------------------------------------------------------------------------------------------------

Hi,
The most efficient way to get a count from the database is using the DB->stat API (http://docs.oracle.com/cd/E17076_02/html/api_reference/C/dbstat.html)
The code will be something like:
        DB *dbp;
        DB_BTREE_STAT *statp;
        int ret;
        /* Print out the number of records in the database. */
        if ((ret = dbp->stat(dbp, NULL, &statp, 0)) != 0) {
                dbp->err(dbp, ret, "DB->stat");
                goto err1;
        printf("%s: database contains %lu records\n",
            progname, (u_long)statp->bt_ndata);
        free(statp);The code comes from the example included in the distribution at examples/c/ex_btrec.c
If the database isn't a btree, you should update to the appropriate statistics structure and field.
It's worth noting that retrieving the count is never a "cheap" operation. The count is not stored in the database - since doing so introduced a single point of contention that creates a bottle neck.
Regards,
Alex Gorrod
Oracle Berkeley DB

How to get the number of messages consumed by a MDB ??

Hi all,
How to get the number of messages consumed by a MDB displayed in OEM in a Java Application ???
DMS ??? what use DMS ???
tanks

ok.
Well using DMS is one way to get at these sorts of stats in a programmatic manner.
There's a Java API you can use, or you could call out to the Spy servlet to query the DMS stats in either text or XML form.
I don't have an MDB published so I can't show you specifiically, but here's the sort of query you can use to extract the data.
http://localhost:8888/dms0/Spy?format=raw&table=oc4j_ejb_stateless_bean&recurse=children
Which produces a table of the TEXT form:
<DMSDUMP version='9.0.4' timestamp='1163456821185 (Tue Nov 14 08:57:01 CST 2006)' id='8888' name='OC4J'>
<statistics>
/oc4j [type=n/a]
/oc4j/default [type=oc4j_ear]
/oc4j/default/EJBs [type=oc4j_ejb]
/oc4j/default/EJBs/jmsrouter_ejb [type=oc4j_ejb_pkg]
/oc4j/default/EJBs/jmsrouter_ejb/AdminMgrBean [type=oc4j_ejb_stateless_bean]
pooled.count:     11     ops
pooled.maxValue:     1     count
pooled.minValue:     0     count
pooled.value:     0     count
ready.count:     11     ops
ready.maxValue:     1     count
ready.minValue:     0     count
ready.value:     0     count
session-type.value:     Stateless
transaction-type.value:     Bean
/oc4j/default/EJBs/jmsrouter_ejb/EnqueuerBean [type=oc4j_ejb_stateless_bean]
pooled.count:     11     ops
pooled.maxValue:     0     count
pooled.minValue:     0     count
pooled.value:     0     count
ready.count:     11     ops
ready.maxValue:     0     count
ready.minValue:     0     count
ready.value:     0     count
session-type.value:     Stateless
transaction-type.value:     Bean
/oc4j/default/EJBs/jmsrouter_ejb/TimerHandlerBean [type=oc4j_ejb_stateless_bean]
pooled.count:     11     ops
pooled.maxValue:     0     count
pooled.minValue:     0     count
pooled.value:     0     count
ready.count:     11     ops
ready.maxValue:     0     count
ready.minValue:     0     count
ready.value:     0     count
session-type.value:     Stateless
transaction-type.value:     Bean
</statistics>
</DMSDUMP>
Or produces an XML document of the form:
http://localhost:8888/dms0/Spy?format=xml&table=oc4j_ejb_stateless_bean&recurse=children
You can use the Spy console to find the table that contains the details for MDB and then take it from there.
This is not what you specifically want to do, but it does provide a good overview of how DMS is used.
http://www.oracle.com/technology/pub/notes/technote_dms.html
-steve-

How to get the number of bytes at TCP port

Hi all,
How to get the number of bytes to read at the TCp port...as someone had suggested in some forum we do read the number of bytes first and then pass this...
but we get a problem when we have FF data in this...because then it sends 2 FF data...and cause of this we skip the last data...is there any solution for the same?

Hi
In LabVIEW you don't have the same property as in serail port.
You havn't "Byte at TCPIP port".
if you developp a protocol, one soltion, is to send the size to read.
Ingénieur d'Application / Développeur LabVIEW Certifié (CLD)
Application Engineer / LabVIEW Certified Developer (CLD)

How to get the number of decimal places configured for a site column

Hi,
I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
The column conatins a value, but when retrieved programatically is displayed as 5.00000000 instead of 5.00.
I am retrieving this column using listitem.Properties[field.InternalName].
I need to trim the decimals based on number of decimal places configured for the site column.
How to get the number of decimal places configured for a site column?
Thanks in advance,
dhijit

Get the field as SPFieldNumber and then check DisplayFormat which returns
SPNumberFormatTypes
SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

How To get the number of request's for a single Composite Application

Hi can any body tell how to get the number requst's for a single composite application.
Thanks
Mani

Hi,
There are lots of STATE is available for composite instances, like mentioned in the below query. I hope you will get answer from the below query.
SELECT (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END) AS STATE, component_name, COUNT(*) AS NUM_OF_CUBE_INST FROM CUBE_INSTANCE where composite_name='PASS THE COMPOSITE NAME HERE..........'
group by (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END), component_name;
Thanks,
Vijay

How can get batch number in process order?(T-code: COR1, COR2)

Please tell me step by step process it will be better to me the solve my issue.
When End-user uses alread existed batch number,
Pop-up Message,
"Your batch number is already exist.
Are you creating new batch number?"
If the answer is "No",
System still uses that batch number.
And User-Exits, or bodies don't exist this time.
How can I get this batch number When saving in process order?
I uses User-Exits "SAPLV1ZE" in Batch Number Check,
"PPCO0007" and "PPCO0001" in saving process order.
I know "PPCO0001" has all information about process order,
but I can't get batch number to "PPCO0007" From "PPCO0001" by using Memory ID.
Cause PPCO0007 happens before PPCO0001.
(ref. PPCO0007 can stop saving in process order.)
I want to know how can I get batch number when pop-up message's answer is "No".
I have to send this batch number to PPCO0007 by using Memory ID.
Please, help me.
Edited by: Jamie White 99 on Mar 15, 2010 11:00 AM

Dear,
Could you please clear your requirement in brief?
You don't want to use the existing batch number or want to assign external batch number or want unique batch number?
Use SAPLV1ZE and EXIT_SAPLV01Z_003 where you can replace the proposed number range with external interval defined by yourself.Also using EXIT_SAPLV01Z_004 you can define your own checking rule.
Further information can be obtained from the documentation on the enhancements
Also refer this link,
http://help.sap.com/saphelp_40b/helpdata/ru/dc/1d4b6e5733d1118b3f0060b03ca329/content.htm
Re: External batch assignment( Manual)
Regards,
R.Brahmankar

How to get bus number and socket number of NI-6143 PCI board using NI-DAQmx?

Similar Messages

Maybe you are looking for