How to get C$_ work table name
Guys,
Is there is anyway we can get C$_ table name and drop it, in case if there is any error?I need to drop it as part of error log mechanisam?
I want to do it through ERROR LOG ODI procedure..
Cheers
Sri
In your IKM, you can create an extra step that loads some technical information (like the C$ table) in a special table.
To retrieve the C$ table, you must use some ODI API method.
Example :
select <%=odiRef.getTable("L", "COLL_NAME","W")%> from dual
or
select '<%=odiRef.getFrom()%>' from dual
In your special table, you will store name of Interface name, target table, C$, I$ table and whatever you want.
Then, with ODI variable, you will be able to retrieve what you want.
Then, in your package, create an error flow (with red arrow) that will execute and ODI procedure that deletes the tables.
Similar Messages
-
How to get the Change Log Table name of the ODS from the system table
Hi,
I have a list of ODSs in the system and I am interested in finding the corresponding Change Log Table and the number of records in that table.
Can any one please tell me the name of the system table where this information is stored.
I dont want to get in this information manully (from the Contents tab of the ODS maintenane).
Regards,
Harikiran GunnalaHi
Go to SE16
Give the table name as "RSTSODS".
For User application field give CHANGELOG as input
and execute. You will get all the list of Changelog tables Along with below mentioned data
PSA
Version
To
Valid from
Object Status
Technical ODS name
Program Name
Maint Program
Object Name
Last changed by
UTC Time Stamp in Short Form
Partition number
Regards
Raj -
How to get/capture log-on user name on PC (work station)
Hi,
Colud anyone give me how to get/capture log-on user name on my PC (work station)?
I need to get the infomation by using a function module.
Kind regards,
HisaoHi,
TH_USER_INFO shows me terminal ID, IP address and other information. howerver it does't show me log-on user name of OS.
Kind regards,
Hisao -
How to get value on the table control in infotyp e0008
Dear Freinds
I have written a user exit ZXPADU02 for my requirement
as per the requirement in i have calculated wa-poo8-bet01 = wa_p0008-ansal/12 and i have passed on to the INNNN structure .
Nowe when do a Create or Copy for a rcord in infotype 0008 iam not
getting value on Q0008-betrg field on the SCREEN , since it is table control how to get data on the table Control Cell .
Please let me knlow
regardsHi Syamala,
The try to find the name of the table control and pass the values to it.
Of course you have to loop and endloop, the table control and mofidy it from the work area.
Message was edited by:
Sera -
How to get a list of tables in an application
In version 6.0 I could do a simple join on views CI_TABLE_DEFINITIONS and CI_APPLICATION_SYSTEMS to get a list of table names given the name of the application system. The requisite columns to perform the join aren't there anymore in version 6i. How does on accomplish this?
Roger,
The link between containers (Folders and Application Systems) and the objects they own is recorded in a different fashion in Designer 6i. There is a new view SDD_FOLDER_MEMBERS that contains this link. It is an intersection between the containers on the one hand and all other PAC objects on the other.
The query you are after is now written as follows:
select tbl.name
, tbl.irid
from ci_application_systems app
, sdd_folder_members fm
, ci_table_definitions tbl
where app.name = 'APP NAME'
and app.irid = fm.folder_reference
and fm.member_object = tbl.irid
order
by tbl.name
Note: if you do not set the workarea context before running this query, you will get rows returned for all versions of the Application System times all versions of the Tables owned by the Application System. You can set the workarea context by executing this statement before executing the query:
begin
jr_context.set_workarea('Workarea Name');
end; -
How to get showDocument to work
I tried to pop up a broswer to show an image using showDocument. However, I tried it with the 2 methods as in the attachment, and they both failed. (those 2 methods were tried at different times)
Besides, I found in the Java Doc (http://java.sun.com/j2se/1.4.2/docs/api/java/applet/AppletContext.html) saying under the showDocument that An applet viewer or browser is free to ignore .
Can you please kindly tell me what that mean? And can you teach me how to get the showDocument works? Thank you very much.
public class ccdApp extends Applet
public void init()
try
try {
// Method 1
URL url = new URL(getDocumentBase(), "http://10.1.100.120/png/DSC01400.png");
getAppletContext().showDocument(url,"_blank");
// Method 2
getAppletContext().showDocument
(new URL( "http://10.1.100.120/png/DSC01400.png"), "_blank");
catch (MalformedURLException e) {
e.printStackTrace();
}Help, I tried to get this code to work I found on how to use showDocument()?
import java.applet.Applet;
import java.net.*;
import java.awt.*;
import java.awt.event.*;
* <applet code=ShowDocApplet.class width = 300 height=300> <parame
* name="target" value="b"> <parame name="url" value="http://www.yahoo.com">
* </applet>
public class ShowDocApplet extends Applet {
public void init() {
final Button act = new Button("Show Doc");
// For Testing purpose
final String url = "http://java.sun.com";
final String target = "_blank";
* //For ur Application final String url = getParameter("url"); final
* String target = getParameter("target");
act.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
try {
getAppletContext().showDocument(new URL(url), target);
System.out.println("Made it to try block");
} catch (MalformedURLException e) {
showStatus(url + " NOT FOUND");
add(act);
Note: I am using Eclipse 3.2 and I got it to compile and to run as an applet, but when I push the button nothing at all happens. Help -
How to get project GUID from project name?
How to get project GUID from project name in Campaign mgmt ?
hello,
have a look in table CGPL_PROJECT.
regards,
Frédéric -
i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?
On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed. -
When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, WI'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster. -
iTunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help
It is likely a hardware failure
http://support.apple.com/kb/TS3694?viewlocale=en_US#error1 -
How-To Find the R/3 Table Name for a BW Data Source
Hi there,
Please advice how can I find the respective table name in R/3 for a particular BW DataSource ?
P/S : I would like a technical how-to instead of referring the table names at HELP.SAP.COM
For instance, for my Standard Business Content Info Cube 0CCA_C03(CO-OM-CCA: Statistical Key Figures) which extracts from BW Data Source: 0CO_OM_CCA_4
My question is, how can I find out which specific tables in SAP R/3 is this Data Source pulling the data from ?Hi Dinesh,
Data Source: 0CO_OM_CCA_4
1) In my R/3, I ran SE16 : Table -> ROOSOURCE
2) OLTPSOURCE -> 0CO_OM_CCA_4
3) EXMETHOD = F1
(Hence, I assume the Extraction Method is a Function Module)
4) So, Function Module = BWOM_RS_GET_CTRSTA
5) Run SE37 in R/3
How do I find out the specific tables in this Function Module ?
Would you please list them for me, so I can further refer to the individual tables ? -
How to get all rows in table to red using alternate rows properties option
How to get all rows in table to red using alternate rows properties option
Hi Khrisna,
You can get all rows red by selecting the color red in the "Color" and "frequency" to 1 under the "Alternate Row/Column colors".
I tried doing it and the colors freaked me out (all red) :-D
Kindly tell me if im missing something.
Regards,
John Vincent -
I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.
-
i just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!
Did you enable Siri in settings?
Settings > General > Siri > ON
If Siri is off, all you get when pressing the home button for 1 second is the old Voice Control. -
Sharepoint Workflow : how to get document full path + file name into variable?
Hi,
Anybody knows how to get document full path + file name into a variable in Sharepoint 2010 workflow?
Example http://sp1:80/InvoiceQueue/Shared Documents/123.pdf
I am using List Workflow which links to a document library.Hi SAMSUNG,
According to your description, my understanding is that you want to get the full path of a document in a list workflow.
You can set the variable to the Enconded Absolute URL of the document. The screenshot is my testing. In my testing (in the red area), when the title of a document was equal to the tile of the current item, set a variable to the Enconded Absolute URL of the
document. I used ‘Log to history list’ to check the value of the variable in Workflow History .
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support
Maybe you are looking for
-
OK, it's been a few years since I originally asked this question. I think it was back when I was using DW 4, or maybe 3. I'm sure there's an answer by now since we're up to version CS4, which I guess is DW 10, right? (I'm still using DW 8 because I h
-
Sharing a local printer over AE's
I have two Airport Extreme (802.11.g) base stations and one is using WDS to extend my coverage to a second floor and garage. I have a shared printer on an iMac connected to one base station (the master) and can't seem to access it while connected to
-
Suspending USB Device [SOLVED]
I had 2.6.32 a while ago and wrote a script that allowed me to turn a certian usb device on and off (I used my usb mouse as a demo). When I upgraded to 2.6.33, the way I was doing this stopped working. I was using this (with $port being something lik
-
How to trigger an "open file" dialog box
I am using forms 10g. Does anyone know of codes to trigger "open file" dialog box in a button object? My goal is that the user may be able to select a file from his terminal by clicking a button. Thanks in advance.
-
How to design and implement performance ratings of employees in ByD system. Any ideas. Anbas Edited by: on Feb 10, 2012 5:52 AM