How to get calendar travel time (set up in Mavericks) to show on iOS 7 calendar?

I was wondering how to get calendar travel time (set up in Mavericks) to show on iOS 7 calendar? If I change a location in mavericaks it is updated in my iOS 7 calendar, but if I add travel time to an appointment, that does not show up on my iphone. This seems like a big miss for apple if this is the case. I could maybe understand not adding the ability to add travel time in iOS 7, but not being able to see the travel times you set up seems very incomplete. Any ideas or insight?

Hello Cheer,
I don't believe the table changed when migrating from Access. I had two tables before the migration, one was for the SwitchBoard Manager and the other table was for the database table. I used the Switchboard to navigate to different menus, such
as the Main Form, Power Form, Server Form, etc. Let me know if I can provide any other information to help you narrow this down for me.
Thank you for your assistance.
Thai

Similar Messages

How do I sync travel time from iCal to calendar on an iOS device?

Hi, I really like the feature travel time in iCal. Unfortunale it only works great on the Mac. Therefor I only get the correct time when to leave when I am at home.
I have an example:
I made an apointment that is 2 hours and 3 minutes travel time away on my iMac. This is actually transferred to my iPhone correctly.
I also added an apointment with a lication in the same city. On the iMac it shows me that I will need 8 minutes from the first meeting to the second apointment and that it will remind me in time to leave. Everything seems fine. But when I look in calendar on my iPhone it will remind me 1 hour and 8 minutes before the meeting starts. That does not make any sense.
I thought that maybe iOS calendar adds the usual time set to remind me and adds the driving time. This is not the case since the usuall time is set to two hours. On the iMac the usuall time to remember me is set to one hour. It is probbably coming from here that it adds the hour but it does not make sense.
Does anynbody know how to use the travel time funktion properly for all devices?
I am also lokking for a way to set the reminder to travel time plus X minutes. It would make sence to get reminded when to get ready and not when you sit at your desk and are actually supposed to get out of the house...

Ok, I found the answer.
iCal will push the travel time plus the standard reminder time to the iOS device. So I set the standard remeinder to 10 minutes and I know whenever I am reminded that I have 10 minutes to get going. We can only hope that Apple will work some kinks out of this feature and we will be able to set a standard reminder for all appointments with travel time like "Leave in 30 minutes" to finish up what your doing or wrap up a meeting and then "leave in 5 minutes" to really get going. If you have the same issue write to apple.com/feedback. Maybe they will work on it if the get more feedbacks...

Calendar travel time from home

When entering an event in the calendar and adding an address. I want to show the travel time driving from home but the only options is to show the travel time wlaking or driving from work. How do I get the travel time from home?
MacBook Pro (Retina, Mid 2012), OS X Mavericks (10.9)

From the Help:
So it looks like you need a Home event up to 3 hours before or no address in Contacts?

How to get the end time of an Interface?

How to get the end time of an Interface?

Hi,
As per your reuirement. I will suggest to use IKM SQL to SQL append. and Before Insert statement in IKM u need to add one more step i.e update. Your update should be like this
command on sourse.
<%for (int i=0; i < odiRef.getDataSetCount(); i++){%>
<%=odiRef.getDataSet(i, "Operator")%>
select      <%=odiRef.getPop("DISTINCT_ROWS")%>
     <%=odiRef.getColList(i,"", "[EXPRESSION]\t[ALIAS_SEP] [CX_COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
from     <%=odiRef.getFrom(i)%>
where     <% if (odiRef.getDataSet(i, "HAS_JRN").equals("1")) { %>
     JRN_FLAG <> 'D'
     <%} else {%>
     (1=1)
     <% } %>
<%=odiRef.getJoin(i)%>
<%=odiRef.getFilter(i)%>
<%=odiRef.getJrnFilter(i)%>
<%=odiRef.getGrpBy(i)%>
<%=odiRef.getHaving(i)%>
<%}%>
Command on target..
UPDATE <%=odiRef.getTable("L", "TARG_NAME", "A")%> T
set <%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD2)")%> ='N',
<%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD1)")%> =SYSDATE
where (<%=odiRef.getColList("","T.[COL_NAME]", ", ", "", "UK")%>)
in(<%=snpRef.getColList("", ":[CX_COL_NAME]", ", ", "", "UK")%>) and <%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD2)")%> <> 'N'
check UD1 and UD2 columns.
Hope this will help you.
Regards
Saurabh

Calendar travel time in both directions

So the feature allowing the addition of travel time to an event is great. But in order to be able to use calendar for all my scheduling needs, I really need to be able to do the converse, that is add in the travel time from an event (either back to the origin or to the next appointment).
Is there any way to add this? I'd settle for a simple reflection of the 'To' time to start with.
The auto calculation feature isn't going to help because I need to retroactively update a year's worth of calendar entries. It is based on your current location, among other difficulties.

sberman Southern California
This solved my questionRe: Calendar Travel Time Starting from Work when I want to Start from Home Oct 23, 2013 8:43 PM (in response to theglenlivet12)
From Calendar's help:
To set your starting location, Calendar first looks for your location in any events that are up to three hours before this event. If Calendar doesn’t find a location, it uses your work address during work hours and your home address during other hours. (Your work hours are set in Calendar preferences using the “Day starts at” and “Day ends at” menus.) If your card in Contacts doesn’t have your addresses, Calendar uses your computer’s current location.

How to get the CPU time of a query?

Hello all, will someone pls tell me how to get the CPU time instead of Elapsed Time of a query?
Thanks.

If i am not wrong, Jonathan Lewis blogged about the changed behaviour.
Here is short test:
SQL> CREATE OR REPLACE FUNCTION Cpu RETURN NUMBER IS
2    Retval NUMBER;
3 BEGIN
4    SELECT m.VALUE
5    INTO      Retval
6    FROM      V$statname s, V$mystat m
7    WHERE s.Statistic# = m.Statistic#
8    AND       NAME = 'CPU used by this session';
9    RETURN Retval;
10 END;
11 /
Function created.
cat cpu_test.sql
DECLARE
TYPE t IS TABLE OF NUMBER;
tt t;
BEGIN
dbms_output.put_line(cpu());
SELECT COUNT(*) over(PARTITION BY owner) BULK COLLECT INTO tt FROM all_objects;
dbms_output.put_line(cpu());
SELECT COUNT(*) over(PARTITION BY object_type) BULK COLLECT INTO tt FROM user_objects;
dbms_output.put_line(cpu());
SELECT COUNT(*) over(PARTITION BY owner) BULK COLLECT INTO tt FROM dba_objects;
dbms_output.put_line(cpu());
END;
SQL> select * from v$version
2 /
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for Linux: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL> @cpu_test
0
0
0
0
PL/SQL procedure successfully completed.
SQL> @cpu_test
106
106
106
106
PL/SQL procedure successfully completed.
SQL> select * from v$version
2 /
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
SQL> set serveroutput on
SQL> @cpu_test
1
129
130
145
PL/SQL procedure successfully completed.
SQL> @cpu_test
145
273
275
290
PL/SQL procedure successfully completed.Best regards
Maxim

How to get the system time in a Swing application ?

I know how to do it in JavaScript, but not java. Please help me, and also how to get the system time in an Applet. Thanks !!!

Check this link, I hope it helps
http://202.71.136.142:8080/globalleafs/Swing/View.jsp?slno=22&tbl=0

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

How to get the date time format in OCI

How to get a date time format in OCI instead of only date

You would have to use the OCIDateTime datatype for this. Refer to
OCI documentation for more details.

How to get system idle time

Hello Sir,
I am Udhaya. I don't know how to capture system idle time using java. Please any one help me how to get system idle time. Any class is available in java to get idle time?
Thank in advance
Udhaya

jwenting wrote:
DrLaszloJamf wrote:
jwenting wrote:
the moment you ask the system for its idle time that idle time becomes 0, so just returning a constant value of 0 would always yield the correct answer.But when you don't call this constant method the value it would return is wrong. This is the sort of thing that keeps me up at night.Except of course that when you don't call it it doesn't return it and therefore still behaves properly.
Or were you thinking of philosphical problems like "what does a method do when it's not called?"?Actually I was trying to see if I could get the OP to say boo to a goose.

Help!!! How to get the recovery time of transient response of a power supply with Labview basic package without analysis option?

How to get the recovery time of transient response of a power supply with Labview basic package without analysis option? Does anyone have any idea or some similar function SUBVIs?
Recovery time of transient response is defined as the time from the beginning of the transient to the voltage point on the waveform fallen into 10percent of the overshoot. Well, the waveform is something like a pulse with a soft slope.

I recommend plotting your data on a graph on paper. Take a look at the data, and determine what is unique about the point you are looking for. Look for how you can teach your program to look for this point.
I have written several algorithms that do similar, one in fact being for a power supply, the other being for RPM. Neither algorithm used any advanced analysis tools. They are just a matter of determining, mathematically, when you achieve what you are looking for. Just sit down with your graph (I recommend multiple copies) and draw horizontal and vertical lines that determine when you get to the point you are looking for. You are probably going to have to reverse the array and start from the end, so think in those terms.
If you have trouble, emai
l me a bitmap of the graph, and what you are looking for and I will try to be of further assistance. Don't do that however; until you you have given this a few tries. Your solution should be involve a lot of logic on analog levels.
Good luck

How to get Query response Time?

II am on BI 7.0. I ran some queries using RSRT command. I want to find how much time the queries took.
I went to
st03 -> expert mode -> BI system load-> select today / week/month according to the query runtime day
I do not see any Info Providers. Query was on a cube so why no Info Providers.
Does something have to turned on InfoPorvider to show.
When I look in RSDDSTAT_OLAP table, I do see many rows but cannot make any sense. Is there some documentation on how to get total query time from this table?
Is there any other way to get query response time?
Thanks a lot.

HI,
why not use RSRT ? You can add database statistics option in "Execut & Debug" and you get all the runtime metrics of your query
In transaction RSRT, enter the query name and press u2018Execute +Debugu2019.
Selecting u2018Display Statistics Datau2019 .
After executing the query will return a list of the measured metrics.
The event id / text describes the steps (duration in seconds):
"OLAP: Read data" gives the SQL statements repsonse time (ok - because the SAP
application server acts as an Oracle client a little network traffic from the db server is included,
but as far as you not transferring zillions of rows it can be ignored)
But it gives you much more (i.e. if the OLAP cache gets used or not )...
In the "Aggreagate statistcs" you get all the infoproviders involved in that query.
bye
yk

How to get query execution time without running...?

Hi ,
I had one requirement .... as follows ......
i had 3 sql statements . I need to execute only one sql which execution time is very less.
Can any one help me , how to get query execution time without running that query and without using explain plan..?
Thanks,
Rajesh

Kim Berg Hansen wrote:
But you have ruled out explain plan for some reason, so I cannot help you.OP might get some answers if query was executed before - but since restart. Check V$SQL dynamic performance view for SQL_TEXT = your query. Then ROUND(ELAPSED_TIME / EXECUTIONS / 1000000) will give you average elapsed time.
SY.
Edited by: Solomon Yakobson on Apr 3, 2012 8:44 AM

HT3743 HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?

HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?

If you don't have a SIM card in the phone, you must put one in. It's required for activation.
If you do, then your phone was probably hacked to unlock it from the original carrier. Contact them and see if they will unlock it. If they will not do so, then you can't use that phone.

When I add a *.ics calendar item via email on my iPhone it shows in my calendar on my iPhone but it does not show in my calendar on my iPad. Why?

I am using icloud and family share but when I receive an email with a *.ics calendar file and add it to my calendar on one of my devices it does not show on the calendar of the other devices. Same happens if I e.g. add my flight details to my calendar via the KLM app. The details show in the calendar of the device where I did it, but not in the others.
But if I add a new calendar entry on one of my devices it immediately shows on all my other devices.

If you are talking Photostream remember that Photostream does not transfer existing photos on your device it only transfers new photos added to the camera Roll by taking or saving them. Also note that photos aren't added to Photostream until after the Camera app is no longer in use. Furthermore Photostream is not a backup media. It only saves up to 1000 photos and only for 30 days.
If you are talking about camera roll photos saved in an iCloud backup then there is no way to view these. They are for backup purposes only.

How to get calendar travel time (set up in Mavericks) to show on iOS 7 calendar?

Similar Messages

Maybe you are looking for