How to get calender in f4 help for select options in module pool (URGENT)

Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amruta

Hi Amruta,
First of all, you can not create select-options directly in module pool.
For creating select-option is dialog prog follow these steps:
1. create your selection screen model as subscreen by:
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.
PARAMETRS: P_MATNR LIKE MARA-MATNR.
SELECT-OPTIONS: S_BISMAT FOR MARA-BISMAT.
SELECTION-SCREEN END OF SCREEN 2000.
2. create a screen ( example 100 ) in your module-pool dedicated for selection-screen. on this screen layout sketch a sub-screen name like subscree_2000.
3. write this bit of code in PBO and PAI of the screen 100;
CALL SUBSCREEN SUBSCREEN_2000.
4. include this code in PBO:
INCLUDING SY-REPID '2000'
6. write user_command of PAI, call screen which is going to executable after selection-screen.
5. create a transcation for this dialog module pool with screen 100.
6. execute this transaction and you can see it's behaving like cool with select-options.
After that in [bprocee on value-request], use F4_DATE for both from and to option field.
Hope it will solve the problem.
Regards
Krishnendu

Similar Messages

How to get calender in f4 helpfor select options in module pool (urgent)

Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amruta

Hi,
Check this Example..
Tables:Mara.
Select-options:s_matnr for mara-matnr.
Types:Begin of i_mara,
       matnr like mara-matnr,
       end of i_mara.
data:it_mara type standard table of i_mara.
At selection-screen on value-request for s_matnr-low.
Select matnr from mara into table it_mara.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE         = ' '
      RETFIELD               = 'MATNR'
    PVALKEY                = ' '
     DYNPPROG               = SY-REPID
     DYNPNR                 = SY-DYNNR
     DYNPROFIELD            = 'S_MATNR-LOW'
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
     VALUE_ORG              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
    TABLES
      VALUE_TAB              = IT_MARA
    FIELD_TAB              =
    RETURN_TAB             =
    DYNPFLD_MAPPING        =
   EXCEPTIONS
     PARAMETER_ERROR        = 1
     NO_VALUES_FOUND        = 2
     OTHERS                 = 3

Freely Programed Help for select-option field

Hi,
how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
Please suggest where i am doing wrong??
Edited by: kranthi kumar on Dec 29, 2010 6:19 PM

>
kranthi kumar wrote:
> Hi,
>
> how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
>
> i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
>
> i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
>
> View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
>
> Please suggest where i am doing wrong??
>
> Edited by: kranthi kumar on Dec 29, 2010 6:19 PM
Hi Kranthi,
Please help me to understand your design.
Why would you like to create a Freely programmed value help for select-option?. why not use wdr_select_option directly ?

Can i assign a collective srch help for select option in list display

can i assign a collective srch help for select option in list display

Hi,
Yes ,u can assign a collective search help for select-option in list display.
Eg:
Define your select option like this
SELECT-OPTIONS: s_vbeln FOR likp-vbeln MATCHCODE OBJECT vmva.
Regards,
Shiva.

F4 help for select options based on parameter value

hi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PM

hi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PM

Problem on Search Help for select-option

Hi,
Iam working on a search help for select-option,
is there a way to incorporate select-all or multiple
selection on this?
Thanks!

Hi catherine,
1. Just copy paste this program.
(It will POPULATE the SELECT-OPTION,
   based upon
   MULTIPLE Selection,
   selected by the user,
   in the help provided thru F4IF_INT_TABLE_VALUE_REQUEST.)
2. Eg. is for BUKRS (company code)
3.
REPORT ABC.
TABLES : T001.
DATA : ITAB LIKE TABLE OF T001 WITH HEADER LINE.
DATA : RETURN LIKE TABLE OF DDSHRETVAL WITH HEADER LINE.
SELECT-OPTIONS : BUKRS FOR T001-BUKRS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-LOW.
PERFORM MYPOPULATE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-HIGH.
PERFORM MYPOPULATE.
FORM MYPOPULATE.
REFRESH ITAB.
SELECT * FROM T001 INTO TABLE ITAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS'
      dynprofield     = 'BUKRS'
      dynpprog        = sy-REPID
      dynpnr          = sy-dynnr
      multiple_choice = 'X'
      value_org       = 'S'
    TABLES
      value_tab       = ITAB
      return_tab      = return.
IF RETURN[] IS NOT INITIAL.
REFRESH BUKRS.
CLEAR BUKRS.
LOOP AT RETURN.
    BUKRS-SIGN = 'I'.
    BUKRS-OPTION = 'EQ'.
    BUKRS-LOW = RETURN-FIELDVAL.
    BUKRS-HIGH = RETURN-FIELDVAL.
    APPEND BUKRS.
ENDLOOP.
ENDIF.
ENDFORM.
regards,
amit m.

How to create select-options in module pool program

Hi
i am structed at this point could you please tell me
how to create select-options in module pool program

Steps to get SELECT-OPTIONS in module pool programs.
<li>. Start one dialog program with SAPZ_TEST.
<li>. Place the below code in the TOP include of the dialog program.
PROGRAM SAPMZ_TEST.
TABLES mara.
SELECTION-SCREEN BEGIN OF SCREEN 2100 AS SUBSCREEN.
SELECT-OPTIONS: matnr FOR mara-matnr.
SELECTION-SCREEN END OF SCREEN 2100.
<li>. Create one screen 2000 .
<li>. Go to Layout of the screen and Define subscreen area on the screen and Name it as g_subscreen.
<li>. Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN g_subscreen INCLUDING 'SAPMZ_TEST' '2100'.
PROCESS AFTER INPUT.
CALL SUBSCREEN g_subscreen.
<li>. Activate all.
<li>. Create Transaction code for the dialog program SAPZ_TEST.
<li>. Execute the transaction code. You will see the select-option like we see on Selection-screen.
I hope that it gets u clear idea.
Thanks
Venkat.O

Getting select options in module pool screen

hi experts,
can any one suggest me how to provide select options in module pool screen.
thank you,
regards
vijay

Hi,
Take two fields on screen first for low value and other for high value (say vbeln_low and vbeln_high) also design a button next to the high textbox for select-option button used to display popup.
Using these two input fields append a range (say r_vbeln for vbap-vbeln) for the field to be used (either in query or anywhere).
ranges : r_vbeln for vbap-vbeln.
IF NOT vbeln_high IS INITIAL.
 IF NOT vbeln_low LE vbeln_high.
 MESSAGE e899 WITH text-007. "high value is smaller than low value
 ENDIF.
ENDIF.
r_vbeln-sign = 'I'.
r_vbeln-low = vbeln_low.
IF vbeln_high IS INITIAL.
 r_vbeln-option = 'EQ'. "if user takes only a singlr value
ELSE.
 r_vbeln-option = 'BT'. "if user takes both low & high value
 r_vbeln-high = vbeln_high.
ENDIF.
APPEND r_vbeln. "append range
CLEAR r_vbeln.
On the button click call this FM to call a popup for select-options.
DATA : tab TYPE rstabfield.
tab-tablename = 'VBAP'.
tab-fieldname = 'VBELN'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
 EXPORTING
 title = text-002
 text = ' '
 signed = 'X'
* lower_case = ' '
* no_interval_check = ' '
* just_display = ' '
* just_incl = ' '
* excluded_options =
* description =
* help_field =
* search_help =
 tab_and_field = tab
 TABLES
 range = r_vbeln
 EXCEPTIONS
 no_range_tab = 1
 cancelled = 2
 internal_error = 3
 invalid_fieldname = 4
 OTHERS = 5.
IF sy-subrc EQ 2.
 MESSAGE s899 WITH text-003. "no value selected
ELSEIF sy-subrc <> 0 AND sy-subrc <> 2.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
This whole code will append your range r_vbeln to be used in program.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

How to attach FCODE to select option in Module Pool

Hi all,
 I have created Select option in Module pool by attaching a Subscreen. Now when user enters any value into the select option I need to fetch values from the database in to the table control based on the value entered in select option.
Is it possible and how?
Thanks.

Hi
If u have one select options in module pool programming,Then there is no need for FCODE
bcoz FCODE is needed for push button,check box..like etc.
But select option is a input field.
So u can trace the input as u have done in report
Like
select * from dtab1 into corresponding fields of table itab where field1 in selectoption.
Or if u want that program to be executed after giving input in select option then user will press F8
So Use FCODE 'F8'.
Regs
Manas Ranjan Panda
Message was edited by:
 MANAS PANDA
Message was edited by:
 MANAS PANDA

How to creat select-option on module pool screen???

Hi All,
please tell me how to creat select-option on module pool screen???
Regards
Deepak

Hi Deepak Kumar Sharma,
There are Two ways to achieve it...
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program> <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Also have a look on below threads
how to make select option in module pool
select option in module pool program
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

How to make select option in module pool

Hello,
Can anybody tell me how to create a select option in module pool screen..?
thanks

Easiest way is to create a subscreen and embed this in your dynpro.
report zrich_0006 .
tables: mara.
* Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
            p_rad2 radiobutton group grp1,
            p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
                s_matkl for mara-matkl,
                s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*&      Module STATUS_0100 OUTPUT
module status_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
endmodule.
*&      Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
* Screen screen 100 with a subscreen area called "subscreen_1010"
* Screen Flow Logic follows
*process before output.
* module status_0100.
* call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
* call subscreen subscreen_1010 .
* module user_command_0100.
Regards,
Rich Heilman

How to provide select-option in module pool programming

Hi all,
How to provide select-option in module pool programming.
If any body knows let me immediately.
Thanks
sudheer

Hi Sudheer,
Unfortunately there is no standard way of having a select-option in a module pool program.
What you can try is having two fields and creating a range in your program and populating the range at runtime with respective value and trying to simulate some functionality of the select-option.
Hope it helps.
Thanks, Debasish

How can i decleare select-options in module pool table control?

Hi everybody!!
Can anyone tell me how can I decleare select-options in module pool table control screen?. I have declared it in a screen with a table control but a dump is triggered due to an error when generating the selection screen.
Regards...

My suggestion will be try to use fm
call function 'FREE_SELECTIONS_DIALOG'
Please search this forum you can find lot of threads related to this.
a®

Value help for select options (pass the selected values to the select opt)

Hi everyone,
I created a custom value help for my select options.
It works fine, when the user clicks on the value help, my own view is displayed, and the user can select the required values:
lt_range_table =
wd_this->m_handler->create_range_table(
i_typename = 'ORGEH' ).
* add a new field to the selection
wd_this->m_handler->add_selection_field(
i_id = 'ORGEH'
i_value_help_id = 'MYSO'
i_value_help_type = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_APPLDEV
it_result = lt_range_table
i_read_only = read_only ).
The problem is, how can I pass the values to the select option? When the user selects the values in my view, I have them in an internal table. But how can i pass these values to the select option? I suppose there is declared method for this... but which one?
Thanks
N.

Sorry for the stupid question, but it seems I can't acces my attribute:
I create it in the component controller
NODE: 'APP_DATA'
Attribute: M_HANDLER TYPE IF_WD_SELECT_OPTIONS
Cardinality 1..1
Selection 1..1
Singleton = 'X'
I pass the values int he EDOINIT method of MAIN view:
* Get compnent controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
* Get the controler context node
CALL METHOD LO_CONTROLLER->GET_CONTEXT
    RECEIVING
      CONTEXT = lo_context.
*Get the root node
lo_node = lo_context->root_node.
*Get the child node
lo_child = lo_node->get_child_node( 'APP_DATA' ).
ls_app_data-m_handler = wd_this->m_handler.
lo_child->bind_structure( ls_app_data ).
After this code I test it if the binding is correct:
DATA: ls_test TYPE wd_comp_controller->element_app_data.
CALL METHOD LO_CHILD->GET_STATIC_ATTRIBUTES
IMPORTING
    STATIC_ATTRIBUTES = ls_test.
The lstest is correct_. It has the reference for the SelectOption
Now, in the SEL_TREE View:
* Get compnent controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
* Get the controler context node
CALL METHOD LO_CONTROLLER->GET_CONTEXT
    RECEIVING
      CONTEXT = lo_context.
*Get the root node
lo_node = lo_context->root_node.
*Get the child node
lo_child = lo_node->get_child_node( 'APP_DATA' ).
*Get the data from the node
CALL METHOD LO_CHILD->GET_STATIC_ATTRIBUTES
    IMPORTING
      STATIC_ATTRIBUTES = ls_app_data.
wd_this->m_handler = ls_app_data-m_handler.
The ls_app_data-m_handler is INITIAL. There is no value in it.
What did I do wrongly?
Please help
Thanks
N.

How to get all the values in the Select-option.

Hi,
I got the select-option field so_week, for eg. If I give 200923 to 200926 (year and week) in the selection screen and then I need to pass this value (200923) to the FM 'ZWEEK_GET_FIRST_DAY' to get the first day of the week.
My question is how can i get all the values from the select option, (i.e) i need to get 200923, 200924,200925, 200926.
Regards,
Anbu.

Hello,
I will prefer Max's solution. But just for the sake of this req.
i need to get 200923, 200924,200925, 200926
i am proposing my soln:
DATA: V_WEEK TYPE RSCALWEEK.
SELECT-OPTIONS: S_WEEK FOR V_WEEK NO-EXTENSION OBLIGATORY.
AT SELECTION-SCREEN.
DATA:
V_COUNT TYPE I,
V_ADD   TYPE I,
RT_WEEK TYPE RANGE OF RSCALWEEK,
RS_WEEK LIKE LINE OF RT_WEEK.
V_COUNT = ( S_WEEK-HIGH - S_WEEK-LOW ) + 1.
DO V_COUNT TIMES.
    RS_WEEK-SIGN = 'I'.
    RS_WEEK-OPTION = 'EQ'.
    RS_WEEK-LOW = S_WEEK-LOW + V_ADD.
    APPEND RS_WEEK TO RT_WEEK. "RT_WEEK--> Will contain the week values
    CLEAR RS_WEEK.
    V_ADD = V_ADD + 1.
ENDDO.
@Max: I was stupid enough not to think of your solution. Need to leave office
Cheers,
Suhas

How to get calender in f4 help for select options in module pool (URGENT)

Similar Messages

Maybe you are looking for