How to get chapter selections to work correctly

I made a movie and set 8 chapters using iMovie 06.
I have 8 chapters (4 long x 2 tall) and when I test them with iDVD 09 preview, all of the buttons work perfectly. I can navigate left and right and up and down.
I then burned an image file and then tested the image using Apple's DVD player. When I do this, I can move my selection left and right (with the remote) but I cannot select buttons by going up or down.
Why would the iDVD preview work perfectly but the actual DVD image have this bug?

Hi
If DiskImage doesn't work I would guess
• free space to low
• RAM 1Gb or more
• Plist file need to be trashed
• Start a new account - re-try
• Repair permissions
• Repair hard disk
• LAST resort re-install iDVD
You seen my list so many times - but here goes again.
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides. Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
Yours Bengt W

Similar Messages

Can't seem to figure out how to get the signature to work correctly

I am having trouble getting Digital Signatures to work on a PDF. This is the first time that I have ever tried to use them, and the first time that I used Lifecycle to convert a form instead of just building it one field at a time in Acrobat Pro.
In the past, I have gotten several PDF's that required signing. It seemed like an easy process, I clicked on the signature to sign it and then the email button to submit. The first time I did it before I had a signature, it walked me through the process of getting one set up, that was easy too.
Now, I need one, and all of the sudden, it doesn't seem so easy any more.
I have the CS3 Design suite with Acrobat Pro 8.0
I did the layout in InDesign, and the form conversion in Lifecycle. The signature fields were added there automatically, all looked good so far.
I open the file in Reader 9.0 and am unable to add a signature. I made sure that Reader 9.0 knew where my signature file was, but no matter what I do the document sign options are all greyed out.
I opened the form in Acrobat 8 and it will let me sign, but I have to immediately save/as or the signature doesn't take. I have to save it save/as twice because there are two signatures.
I figured there was some rights setting wrong, but can't find it. I have searched for signature, but can't seem to find a post that applies to my problem.
This is driving me crazy. This shouldn't be that difficult. I am missing something here.
Can anybody here shed some light on this?
Thanks,
Kirk

To enable the form to be signed in Reader you will need to open the form in Acrobat; goto Advanced>Enable Usage Rights and then save this copy of the form for sending out to the users.
The user should then be able to edit and digitally sign the form. They can then email the signed/saved pdf as a browsed for attachment or via the email icon in the toolbar. Note - if you have created an email submit button on the form, then unless they have Acrobat they could only return an xml file.
The other way to do this however is to create a dataset by 'distributing' the form. This time the Email Return button will send back a full version of the form. During the distribution setup you will have the option to email the form directly or to save it and send it later,so you can send to users as and when or even post it to a website or intranet.
When you receive and open the returned form it will ask whether you want to add it to the predetermined dataset (or if you want to categorise the returns into geographical areas for example, you could create new additional datasets at this point). If the form is data heavy however, the dataset will become very large and unwieldy pretty quickly, but you can export the data from it (including signatures) in xml format and import this into an Excel spreadsheet.
To simplify the Excel xml import process I'd recommend you carefully structure your form in the hierarchy (LiveCycle) into the order you would want the data items to appear in your spreadsheet and switch off those data items that you will not need by setting the default binding for the irrelevant fields to "None".
Clear as mud? Hope this helps.

How to get the SearchBar to work correctly inside a NavBar in iOS7

have a tableview containing all the countries and their flags. I've been working to add a search bar and had it all working until I decided to move the search bar into the navigation bar allowed in iOS7 (for my purposes, that layout works very well). Now, the table loads fine, the search bar shows up fine. As I type into the search bar, I can see the filtered list being built via the console. All looks good, EXCEPT the search results table never displays. In other words, I don't see the filtered list in a new tableview. This method is being called to build the filtered list: -(void)filterContentForSearchText:(NSString*)searchText scope:(NSString*)scope But the standard method: - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath never gets called. As I said, it's working fine when the search bar isn't in the navigation bar. I have assigned the following delegates and properties in ViewDidLoad: searchDisplayController.delegate = self; searchDisplayController.searchResultsDataSource = self; searchDisplayController.searchResultsDelegate = self; searchDisplayController.displaysSearchBarInNavigationBar = YES; I also have: #pragma mark - UISearchDisplayController Delegate Methods -(BOOL)searchDisplayController:(UISearchDisplayController *)controller shouldReloadTableForSearchString:(NSString *)searchString { // Tells the table data source to reload when text changes [self filterContentForSearchText:searchString scope: [[searchDisplayController.searchBar scopeButtonTitles] objectAtIndex:[searchDisplayController.searchBar selectedScopeButtonIndex]]]; // Return YES to cause the search result table view to be reloaded. return YES; } What am I missing???

I am reposting this so the formatting is a bit better. Sorry aobut that!
I have a tableview containing all the countries and their flags. I've been working to add a search bar and had it all working until I decided to move the search bar into the navigation bar allowed in iOS7 (for my purposes, that layout works very well). Now, the table loads fine, the search bar shows up fine. As I type into the search bar, I can see the filtered list being built via the console. All looks good, EXCEPT the search results table never displays. In other words, I don't see the filtered list in a new tableview.
This method is being called to build the filtered list: -(void)filterContentForSearchText:(NSString*)searchText scope:(NSString*)scope
But the standard method: - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath never gets called.
As I said, it's working fine when the search bar isn't in the navigation bar. I have assigned the following delegates and properties in ViewDidLoad:
searchDisplayController.delegate = self;
searchDisplayController.searchResultsDataSource = self;
earchDisplayController.searchResultsDelegate = self;
searchDisplayController.displaysSearchBarInNavigationBar = YES; (this one is what "breaks the load of the results table);
I also have:
#pragma mark - UISearchDisplayController Delegate Methods
-(BOOL)searchDisplayController:(UISearchDisplayController *)controller shouldReloadTableForSearchString:(NSString *)searchString {
[self filterContentForSearchText:searchString scope: [[searchDisplayController.searchBar scopeButtonTitles] objectAtIndex:[searchDisplayController.searchBar selectedScopeButtonIndex]]];
return YES; }
What am I missing???

How do I get my Internet to work correctly?

I recently purchased an iPhone 4 and all of my apps that require Internet will only work if I have wifi. How do I get my Internet to work correctly without wifi?

Read https://discussions.apple.com/thread/3940924?start=0&tstart=0

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

How to get the selection parameters from logical database into one of the t

Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
Basu

Hi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter

Any suggestions for how to get my logic keyboard working properly for FCE?

Any suggestions how to get my logic keyboard working properly for FCE? I can't use some of the shortcuts - insert, overwrite etc. maybe the system settings aren't correct?

This normally happens when debris builds between the trackball and the rollers on the inside of the mouse.
Turn the mouse upside down and rub the trackball vigorously on a sheet of paper or microfiber cloth to try and free it up.
Regards,
Captfred

How to get the selected values from the shuttle

Hi
Please tell me how to get the selected option values from the shuttle leading list.
Thanks

you can also obtain the option values present in the leading and trailing lists using the
following methods:
public String[] getLeadingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)
public String[] getTrailingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)For example, the following code sample returns an array of values in the trailing list, ordered according to the
order in which they appear in the list:
String[] trailingItems =
shuttle.getTrailingListOptionValues(pageContext, shuttle);Thanks
--Anil

How to get multiple selected fields in list

Hello all,
I am trying to get multiple selected value from a list but i dont know how to get multiple selected fields from a list though AS3.
Actually i want to pass the selected fields to php, so for that i need to get the selections and send to php.
Thankx..

i want to put the selected fields of list in an array through AS3....
actually......i figured it out how to do that...........
Its simple......use
list.selectedItems[index]
and to get the number of items selected......
list.selectedItems.length
simple.....

How to get the selected rows & columns in the table?

hi everybody,
In my application the table is kept inside the event structure.I select the cells in the table (using mouse) on running time.How to get the selected number of rows & columns in that table?

Hello,
You can fill selected values of the table by writing to it or the corresponding property using a property node - the table is just a 2D array of strings. I think for your "disable" question you are referring to the shortcut menu (when you right click). If you are using LabVIEW 8.x, you can edit or disable that shortcut menu - just right click on your table at edit time and choose Advanced >> Run-Time Shortcut Menu.
Best Regards,
JLS
Best,
JLS
Sixclear

How to get the selected value in SelectOneMenu in backing bean

Hello all,
I need your help. I want to have 2 select menus with the second menu's items list are populated based on the selection in the first menu. I don't know how to get the selected value in the backing bean so that I can based on that select menu to populate the second menu's item list. Basically I need to access to the UI Component of the first select Menu and retrieve its selected value.
Could you help me out?
Thank you very much in advance,
Lngo

Hi Lingo,
There r two ways of getting the values into the list. First one is hardcoding the values and the second one is use the list and get the values into the list by firing a query in the database.
Inorder to display the values in the second menu based on the first onces selection we need to add an attribute to the first selectonemenu known as valueChangeListener and we need to sumit the page.
Here is the sample code
<h:selectOneMenu id="catalogue"
                              binding="#{urbean.catalogue}" onchange="submit()"
                              valueChangeListener="#{urbean.categoryValueChange}"
                              <f:selectItem itemLabel="Select Catalogue" itemValue="" />
                              <f:selectItems value="#{urbean.catalogueList}" />
</h:selectOneMenu>
<h:selectOneMenu id="category"
                              binding="#{urbean.category}">     <f:selectItem itemLabel="Select Category" itemValue="" />
                              <f:selectItems value="#{urbean.categoryList}" />
                              <                         </h:selectOneMenu>
now in method called by valuechangelistener we need to write the similar code
public void categoryValueChange(ValueChangeEvent event) {
String rfnum = (String) event.getNewValue();
List categoryList = new ArrayList();
List tempList = new TablenameDAO().getActiveCatByCatalogueID(rfnum);
          for (int i = 0; i < tempList.size(); i++) {
               Tablename tablename = (Tablename ) tempList.get(i);
               String value = "" + tablename .getrfnum();
String label = tablename .getname();
     if (label == null) {
               label = "";
               SelectItem item = new SelectItem(value, label);
               categoryList.add(item);
          bean.setCategoryList(categoryList);
///getActiveCatByCatalogueID (rfnum) should bring the records which r based on the rfnum
if u follow this process i am damsure that u will get the values in to the secondlist based upon the first list
Thanks & Regards
Manidhar

How to get the selected cell in a Matrix.

Hi all,
Does any one know how to get the selected cell in a Matrix. Please help to answer. Thanks in advance.
Regards,
Thanh Tran

Hi,
You can get the value of every cell using UI API but using datasources is a better aproach.
Using UI API you need to know the event you want to catch. Example: Catching click event in itemcode column and getting the value (C#):Ki
      if ((pVal.EventType == BoEventTypes.et_CLICK) && //CLICK EVENT
          (pVal.ItemUID == "38") &&                                       //MATRIX-> ITEM 38
          (pVal.ColUID == "1") &&                                           //ITEMCODE COLUMN
          (!pVal.InnerEvent) &&
          (!pVal.BeforeAction))
                Form form = null;
                try
                    form = kernel.Application.Forms.Item(pVal.FormUID);
                    form.Freeze(true);
                    Matrix mtx = (form.Items.Item(pVal.ItemUID).Specific as Matrix); //MATRIX OBJECT
                    string itemCode = (mtx.Columns.Item("1").Cells.Item(pVal.Row).Specific as EditText).Value.Trim(); //itemcode = VALUE OF CELL. COLUMN "1": ITEMCODE COLUMN. CURRENT ROW: pVal.Row
                catch (Exception ex)
                    kernel.Application.MessageBox("Error " + ex.Message, 0, "", "", "");
                finally
                     if (form != null)
                        form.Freeze(false);
Kind regards,
Nauzet Díaz

I have an airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?

I have a new airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?

Welcome to Apple Support Communities
If you purchased the computer before 2010, your computer hasn't got Thunderbolt, so you can't use it

How to get the webcam to work?

Hi,
As I don't have an instruction book for this computer, can anyone tell me how to get the webcam to work please?
There is supposed to be something that pops up from the side of the screen, but I've left the mouse sit there for ages on all sides and nothing. Please assist me.
Kit_e

I refer you back to my original question.
There used to be a bar at the side that popped up when you left the mouse sit there for a bit. It no longer pops up ... ie: it's disappeared and will not return ... this is what "started" the webcam for use as a webcam.
I have no idea on how to use the webcam from any other place. There is no icon. There is no mention of it in the programs list. There is nothing. There is a webcam sitting there in the laptops lid, but I can't find where to "access it". Like I said there is no icon, nothing in the programs list.
I want to be able to use it. You know, like you use a webcam. On the web, as a camera. No particular website or software that I have in mind.
Thanks.

How to get Saved Selection list in javascript?

Hello!
Recently I met a little problem about save selection. I want to get saved selection list so that I can used in javascript. Now I have no ideals. Hope you tell me some useful information about how to get Saved Selection list in javascript!

Mark is right, it's not possible.
But do you know you can assign selection to a variable, and get back to it simply like this?
var sel = app.selection;
app.selection = null;
/* your codes here
app.selection = sel;

How to get chapter selections to work correctly

Similar Messages

Maybe you are looking for