How to get cheap iphone & original

how to get cheap iphone & original

Posting the IMEI and Serial number to a public forum is extremely unintelligent.
Why would you buy a device from someone if you have concerns about the device being legitimate?

Similar Messages

  • I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim, I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim

    I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim, I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim

    actually I found the solution :
    http://www.igeneration.fr/itunes/astuce-votre-historique-d-achats-itunes-12056
    it's in french, but the images and google translate will be enough
    hope that helps for the others having the same kinda problem

  • How to get the iPhone 5c to pair with my mac book pro and my ue speaker

    How to get the iphone 5c to pair with my mac book pro and my ue speaker

    TerryReynar wrote:
    How to get the iphone 5c to pair with my mac book pro
    You don't. It only sync using iTunes.
    It doesn't "pair".
    and my ue speaker
    What is "ue speaker"?
    Ultimate Ears wirless bluetooth speaker?
    Set speaker to Pairing mode.
    On the iPhone, Settings > BlueTooth.
    Select the speaker.

  • How to get the iphone serial number  in application?

    hello,  everyone
       i  really want to konw how to get the iphone serial number in aplication ?  As it's different from uniqueIdentifier ....
    thank you

    Michele is correct - sneep will help you get the serial from the running domain on the M3000 ,
    and it is a good idea to install STB on your machines.
    If that isn't possible for you, then sneep can be downloaded directly from [http://www.sun.com/sneep]
    I believe that on this platform, sneep gets the serial from the output of prtconf.
    There is a minor correction to be made :
    After installed SNEEP use "man sneep" for all technical details.The sneep man page is not linked into the shared man pages, so you need to use
    man -M /opt/SUNWsneep/man sneep
    with out going to OK prompt (Banner)It is worth noting that the serial shown in the OBP banner is not the product serial
    that you will find on the physical serial tag.
    The banner "serial" is the decimal equivalent of the host ID, which you normally get in hexadecimal from the "hostid" command.

  • I have lose my iphone4 box and my i phone4 is freez how i get my iphone serial no

    i have lose my iphone4 box and my i phone4 is freez how i get my iphone serial no

    Sorry duh. You said your phone is frozen. Sorry cant help. Did you try pressing and holding both the sleep and home buttons at the same time for 20 seconds? That sometimes is all you need to do to unfreeze the phone. Make sure it's charged fully too.

  • HOW TO GET MY IPHONE 4S OUT OF BEING STUCK IN HEADPHONES MODE? I TRIED BLOWING IT, I TRIED SUCKING IT AND I TRIED THE QU TIP, ALSO FREEZING AND PLUGGING AND UNPLUGGING THE HEADPHONES. I ALSO RESTORED IT AND PUT IT IN DFU MODE AND STILL NOTHING.

    How do i get my iphone 4s out of being stuck in headphones mode. When i dont even have headphones plugged in, it says headphones ringer. I've tried blowing and sucking in the jack, didnt work. I tried using a blowdrier in the jack, didn't work. I also tried putting it in the freezer while in a plastic bag, trying to clean it with a qu tip, and plugging and unplugging the headphones more than 100 times, still nothing and i also restored, reset, and put my iphone in DFU mode, and still nothing seems to work. DOES ANYONE KNOW ANY OTHER WAY I NEED HELP PLEASEEEEEEEE!!!!!!!!!!! ANYONE ANY OTHER WAYS TO FIX IT?!?!??!? That would be very helpful

    I had the same problem.  I squirted a drop of WD40 in the headphone hole and then used a plastic dental toothpick and twisted it around in the hole.  It amazingly worked.
    Good luck

  • How  to  get my   iphone  last locatin

    how  to   get   iphone   last  location

    If Find My iPhone is turned off, there is no way to track your device. Apple does not track phones. Your only option is Find My iPhone and you do not have that active, so you will not be able to track your phone. Take the time to report it to law enforcement and your carrier, and change any passwords for accounts that were on your device, especially if you did not have a passcode set up on the device.

  • How i get my iphone 4S in my pc plsssssss

    pls i need ur help me how two fine my iphone in compureter ...thank you

    Try Here  >  http://support.apple.com/kb/TS1538

  • Embed ColorSync profile, how to get back to original color profile?

    I am a bit shocked , experienced today that iPhoto by default embed ColorSync profile (found under general- advanced settings for iPhoto) to every photo imported.
    I always believed (and trusted) iphoto did not change the original file from the memory card. I have compared today the file from the memory card and the one found under originals in iPhoto library and see now that iphoto darken the shadows area a bit, in my eyes not a good thing.
    So my question is , is the process done by iPhoto reversible? Can I get back the original profile (sRGB I believe) for my photos?

    iPhoto by default embed ColorSync profile (found under general- advanced settings for iPhoto) to every photo imported.
    Well let's get past the shock for you. It doesn't.
    If the photo has a pre-existing color profile then the file is not touched. iPhoto uses the one already embedded. It only adds a profile if 1: there is none present and 2. If you check the box.
    The profile attached is virtually indistinguishable from sRGB, just adapted slightly for Apple monitors.
    Search the Help for ColorSync. This explains it quite clearly.
    Regards
    TD

  • I have a new macbook pro.  I'm seeing my wife's iphone contacts on my icloud.  I can't figure out how to get my iphone contacts synced up with my new macbook and get rid of her contacts.  Suggestions?

    I have a new macbook pro.  I'm seeing my wife's iphone contacts on my icloud.  I've done everything I know to do to make sure my apple id is correct and has my information.  I can't figure out how to remove her contacts and add my iphone contacts to the cloud or my macbook pro.  Any suggestions?  Thanks.

    You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro

  • How to get an iPhone 4 out of recovery mode?

    The restore needed popped up on my phone and also started cutting on and off every 3 or 4 minutes. Intially I tried to restore it through iTunes but it would not stay long enough to be restored. Then I tried to restore it in recovery mode. However the error message 1 and error message 3194 popped up after several attempts. What do those two error message mean?
    I'm wanting to take my pictures off of my phone. How can I get my phone out of recovery mode?

    Disable ALL of your antispyware/antivirus software, open your firewall, and try again. I would aslo disconnect any other USB peripherals.
    If that does not work the error 1 would indicate their is hardware damage to you iPhone. You will need to get it serviced.

  • How to get the iphone 4 retina resolution

    hi  i'm using flash cs5 to create a small ipa
    but it only support the 320*480 resolution , i want to let this ipa be used in iphone4 which is 960*640.
    i set the file (.fla) 960*640 and put a *.jpg with 960*640 on it.
    it can be used in iphone4 but i think it's just 320*480 because it's blurer than the original pic which is 960*640 set in the fla.
    how to solve it ?

    Exactly, i think you described the issue perfectly.
    Actually if you test the app under Flash cs5 professional (Control -> Test Movie -> in AIR debug launcher (mobile)) it opens a 320x480 window no matter which screen size you specify on the .fla properties.
    Is there somebody from adobe that can confirm this? i hope the fix will be released soon, because there might be a lot of devs already targeting 4th gen iphone and ipod devices.
    Anybody having the same issue out there?
    Thanks Pea.

  • How to check my iphone original

    dear madam/sir i have a iphone 4 i want to check my phone original or fake model
    MC318LL/A AND S.R. 79034QM84S AND IMEI 012425008121464 AND ICCID 8991020113326384483
    so can you tell how can i check my phone if you can check so plz tell me original or not? thanks

    Posting the IMEI and Serial number to a public forum is extremely unintelligent.
    Why would you buy a device from someone if you have concerns about the device being legitimate?

  • ITunes download on another computer - how to get on iPhone???

    I purchased an audiobook on iTunes from my laptop.  I normally sync my iPhone to my home PC. How do I get the audiobooks from the iTunes library to my iPhone without wiping data? Can I re-download the purchases onto my home PC?  Can I transfer the purchases from 1 iTunes to another?  I purchased the audiobooks, it seems crazy that I can't get them to my phone without having to re-purchase them again!
    Please help!

    Open iTunes with the Option key held down, click on Choose Library, and point it there, or drag the songs or a folder containing them into the open iTunes window.
    (47590)

  • How to get back to original, new, empty system

    I bought a new macbook pro and my intention was to transfer all my main account from the old one to the new one. Stupidly, i skipped the setup assistant asking me to connect the firewire cable and all that because it told me that i could use migration assistant later. I chose the same user name as i had on the old machine. Now, when i want to use migration assistant to import the account from the old computer, it tells me there is already a user by that name and i have to chose another name since my main account on the new computer can't be deleted. i am thus a bit stuck because i don't want to have two accounts on the new computer and even less that the account i will most use, which is the one where i have imported all my system, would not be the main account. i guess therefore i need to restore the new mac to a 'fresh from factory status'. i tried reinstalling leopard but that did not work.
    how to i get back to the orginal setup assistant?

    bettyn wrote:
    Is that really the olny option I have considering where it's at right now?
    If you have files on your new mac you would like to save and assuming you have another mac handy (the one you are going to migrate stuff from) you could connect the two by firewire, restart the new one holding down the T key and then pull the files in question across to the other one prior to the erase and install. If you save them in the user folder on your other mac they will come when you migrate that user.
    You said up front that you want to get back to the original system, but none of the detail you have given hints why. Do you really need to do all that or would it be simpler just to change the name of the present admin account on your new computer and then migrate your old user across? There is actually no reason not to have more than one user on your system but, if you wanted, once your old user is migrated and given admin rights, you could delete the other user.

Maybe you are looking for